A finite-time fuzzy adaptive output-feedback fault-tolerant control for underactuated wheeled mobile robots systems

This paper investigates the adaptive fuzzy finite-time output-feedback fault-tolerant control (FTC) problemfor a class of nonlinear underactuated wheeled mobile robots (UWMRs) system with intermittent actuatorfaults. The UWMR system includes unknown nonlinear dynamics and immeasurable states. Fuzzy logic systems(FLSs) are utilized to work out immeasurable functions. Furthermore, with the support of the backsteppingcontrol technique and adaptive fuzzy state observer, a fuzzy adaptive finite-time output-feedback FTC scheme isdeveloped under the intermittent actuator faults. It is testifying the scheme can ensure the controlled nonlinearUWMRs is stable and the estimation errors are convergent. Finally, the comparison results and simulationvalidate the effectiveness of the proposed fuzzy adaptive finite-time FTC approach.

FUZZY ADAPTIVE CONTROL OF FLEXIBLE-LINK ROBOT MANIPULATOR

A fuzzy adaptive control method is proposed for a flexible robot manipulator. Due to the structure characteristics of the flexible manipulator, the vibration modes must be controlled to realize the high-precision tip position. The Lagrangian principle is utilized to model the dynamic function of the single-degree flexible manipulator incorporating the assumed modes method. Simulation results of the fuzzy adaptive control method in the location control and the trajectory tracking with different tip disturbances are presented and compared with the results of the classic PD control. It shows that the controller can obtain the stable and robust performance.

Integrated guidance and control of guided projectile with multiple constraints based on fuzzy adaptive and dynamic surface

Based on fuzzy adaptive and dynamic surface(FADS),an integrated guidance and control(IGC)approach was proposed for large caliber naval gun guided projectile,which was robust to target maneuver,canard dynamic characteristics,and multiple constraints,such as impact angle,limited measurement of line of sight(LOS)angle rate and nonlinear saturation of canard deflection.Initially,a strict feedback cascade model of IGC in longitudinal plane was established,and extended state observer(ESO)was designed to estimate LOS angle rate and uncertain disturbances with unknown boundary inside and outside of system,including aerodynamic parameters perturbation,target maneuver and model errors.Secondly,aiming at zeroing LOS angle tracking error and LOS angle rate in finite time,a nonsingular terminal sliding mode(NTSM)was designed with adaptive exponential reaching law.Furthermore,combining with dynamic surface,which prevented the complex differential of virtual control laws,the fuzzy adaptive systems were designed to approximate observation errors of uncertain disturbances and to reduce chatter of control law.Finally,the adaptive Nussbaum gain function was introduced to compensate nonlinear saturation of canard deflection.The LOS angle tracking error and LOS angle rate were convergent in finite time and whole system states were uniform ultimately bounded,rigorously proven by Lyapunov stability theory.Hardware-in-the-loop simulation(HILS)and digital simulation experiments both showed FADS provided guided projectile with good guidance performance while striking targets with different maneuvering forms.

H_∞tracking design for a class of decentralized nonlinear systems via fuzzy adaptive observer

A novel H∞ tracking-based decentralized indirect adaptive output feedback fuzzy controller for a class of uncertain large-scale nonlinear systems is developed. By virtue of the proper filtering of the observation error dynamics, the observer-based decentralized indirect adaptive fuzzy control scheme is presented for a class of large-scale nonlinear systems using the combination of H∞ tracking technique, a fuzzy adaptive observer and fuzzy inference systems. The output feedback and adaptation mechanisms are both robust and implementable indeed owing to their freedom from the unavailable observation error vector. All the signals of the closed-loop largescale system are guaranteed to stay uniformly bounded and the output errors take on H∞ tracking performance. Simulation results substantiate the effectiveness of the proposed scheme.

Fuzzy adaptive Kalman filter for indoor mobile target positioning with INS/WSN integrated method

Pure inertial navigation system(INS) has divergent localization errors after a long time. In order to compensate the disadvantage, wireless sensor network(WSN) associated with the INS was applied to estimate the mobile target positioning. Taking traditional Kalman filter(KF) as the framework, the system equation of KF was established by the INS and the observation equation of position errors was built by the WSN. Meanwhile, the observation equation of velocity errors was established by the velocity difference between the INS and WSN, then the covariance matrix of Kalman filter measurement noise was adjusted with fuzzy inference system(FIS), and the fuzzy adaptive Kalman filter(FAKF) based on the INS/WSN was proposed. The simulation results show that the FAKF method has better accuracy and robustness than KF and EKF methods and shows good adaptive capacity with time-varying system noise. Finally, experimental results further prove that FAKF has the fast convergence error, in comparison with KF and EKF methods.

Nonlinear combined forecasting model based on fuzzy adaptive variable weight and its application

In order to enhance forecasting precision of problems about nonlinear time series in a complex industry system,a new nonlinear fuzzy adaptive variable weight combined forecasting model was established by using conceptions of the relative error,the change tendency of the forecasted object,gray basic weight and adaptive control coefficient on the basis of the method of fuzzy variable weight.Based on Visual Basic 6.0 platform,a fuzzy adaptive variable weight combined forecasting and management system was developed.The application results reveal that the forecasting precisions from the new nonlinear combined forecasting model are higher than those of other single combined forecasting models and the combined forecasting and management system is very powerful tool for the required decision in complex industry system.

Fuzzy Adaptive Filtering-Based Energy Management for Hybrid Energy Storage System

Regarding the problem of the short driving distance of pure electric vehicles,a battery,super-capacitor,and DC/DC converter are combined to form a hybrid energy storage system(HESS).A fuzzy adaptive filtering-based energy management strategy(FAFBEMS)is proposed to allocate the required power of the vehicle.Firstly,the state of charge(SOC)of the super-capacitor is limited according to the driving/braking mode of the vehicle to ensure that it is in a suitable working state,and fuzzy rules are designed to adaptively adjust the filtering time constant,to realize reasonable power allocation.Then,the positive and negative power are determined,and the average power of driving/braking is calculated so as to limit the power amplitude to protect the battery.To verify the proposed FAFBEMS strategy for HESS,simulations are performed under the UDDS(Urban Dynamometer Driving Schedule)driving cycle.The results show that the FAFBEMS strategy can effectively reduce the current amplitude of the battery,and the final SOC of the battery and super-capacitor is optimized to varying degrees.The energy consumption is 7.8%less than that of the rule-based energy management strategy,10.9%less than that of the fuzzy control energy management strategy,and 13.1%less than that of the filtering-based energy management strategy,which verifies the effectiveness of the FAFBEMS strategy.

Fuzzy adaptive learning control network with sigmoid membership function

To get simpler operation in modified fuzzy adaptive learning control network （FALCON） in some engineering application, sigmoid nonlinear function is employed as a substitute of traditional Gaussian membership function. For making the modified FALCON learning more efficient and stable, a simulated annealing （SA） learning coefficient is introduced into learning algorithm. At first, the basic concepts and main advantages of FALCON were briefly reviewed. Subsequently, the topological structure and nodes operation were illustrated; the gradient-descent learning algorithm with SA learning coefficient was derived; and the distinctions between the archetype and the modification were analyzed. Eventually, the significance and worthiness of the modified FALCON were validated by its application to probability prediction of anode effect in aluminium electrolysis cells.

Modeling and fuzzy adaptive proportion-integration-differentiation control of X-Y position servo system actuated by oscillating pneumatic cylinder

The servo system actuated by oscillating pneumatic cylinder for X-Y plate is a multi-variable nonlinear control system. Its mathematical model is established, and nonlinear factors are analyzed. Due to the existence of deadlock zone and the small damp of the pneumatic oscillating cylinder, it is likely to result in overshoot, and there is also certain steady-state error, so online modifying of proportion-integration-differentiation （PID） parameters is needed so as to achieve better control performance. Meanwhile considering the stability demand for long-term run, a fuzzy adaptive PID controller is designed. The result of hardware-inloop （HIL） test and real-time control experiment shows that the adaptive PID controller has desirable serfadaptability and robustness to external disturbance and to change of system parameters, and its control per- fonnance is better than that of traditional PID controllers.

Fuzzy Adaptive Strong Tracking Cubature Kalman Filter

To solve the problem that the choice of softening factor in conventional adaptive strong tracking filter( STF) greatly relies on the experience and computer simulation,a new concept of softening factor matrix is introduced and a fuzzy adaptive strong tracking cubature Kalman filter( FASTCKF) based on fuzzy logic controller is proposed. This method monitors residual absolute mean and standard deviation of each measurement component with fuzzy logic adaptive controller( FLAC),and adjusts the softening factor matrix dynamically by fuzzy rules,which is capable to modify suboptimal fading factor of STF adaptively and improve the filter's robust adaptive capacity. The simulation results show that the improved filtering performance is superior to the conventional square root cubature Kalman filter( SCKF) and the strong tracking square root cubature Kalman filter( STSCKF).

Finite-Time Fuzzy Adaptive Output Feedback Resilient Control of Nonlinear Cyber-Physical Systems with Sensor Attacks and Actuator Faults

This paper studies the finite-time fuzzy adaptive output feedback resilient control problem for nonlinear cyber-physical systems(CPSs) with sensor attacks and actuator faults.Fuzzy logic systems(FLSs) are used to approximate the unknown nonlinear functions,and a fuzzy state observer is constructed to estimate the unmeasured states.By combining the Nussbaum function with the backstepping control design technique,a fuzzy adaptive resilient control scheme is designed to successfully address the effects of sensor attacks and actuator faults.It is proved that the controlled system is semi-global practical finite-time stability(SGPFS),and the tracking error converges to a small neighborhood of the origin in a finite time interval.Finally,the simulation and comparison results further demonstrate the effectiveness of the designed control method.

Adaptive Fuzzy Backstepping Tracking Control for Flexible Robotic Manipulator

In this paper,an adaptive fuzzy state feedback control method is proposed for the single-link robotic manipulator system.The considered system contains unknown nonlinearfunction and actuator saturation.Fuzzy logic systems(FLSs)and a smooth function are used to approximate the unknownnonlinearities and the actuator saturation,respectively.By com-bining the command-filter technique with the backsteppingdesign algorithm,a novel adaptive fuuzy tracking backsteppingcontrol method is developed.It is proved that the adaptive fuuzycontrol scheme can guarantee that all the variables in the closed-loop system are bounded,and the system output can track thegiven reference signal as close as possible.Simulation results areprovided to illustrate the effectiveness of the proposed approach.

A solution of UAV localization problem using an interacting multiple nonlinear fuzzy adaptive H_(∞)models filter algorithm

The purpose of this research is to improve the robustness of the autonomous system in order to improve the position and velocity estimation of an Unmanned Aerial Vehicle(UAV).Therefore, new integrated SINS/GPS navigation scheme based on Interacting Multiple Nonlinear Fuzzy Adaptive H_∞ Models(IMM-NFAH_∞) filtering technique for UAV is presented. The proposed IMM-NFAH_∞ strategy switches between two different Nonlinear Fuzzy Adaptive H_∞(NFAH_∞) filters and each NFAH_∞ filter is based on different fuzzy logic inference systems. The newly proposed technique takes into consideration the high order Taylor series terms and adapts the nonlinear H_∞ filter based on different fuzzy inference systems via adaptive filter bounds(di),along with disturbance attenuation parameter c. Simulation analysis validates the performance of the proposed algorithm, and the comparison with nonlinear H_∞(NH_∞) filter and that with different NFAH_∞ filters demonstrate the effectiveness of UAV localization utilizing IMM-NFAH_∞ filter.

Fuzzy adaptive robust control for space robot considering the effect of the gravity

Space robot is assembled and tested in gravity environment, and completes on-orbit service（OOS） in microgravity environment. The kinematic and dynamic characteristic of the robot will change with the variations of gravity in different working condition. Fully considering the change of kinematic and dynamic models caused by the change of gravity environment, a fuzzy adaptive robust control（FARC） strategy which is adaptive to these model variations is put forward for trajectory tracking control of space robot. A fuzzy algorithm is employed to approximate the nonlinear uncertainties in the model, adaptive laws of the parameters are constructed, and the approximation error is compensated by using a robust control algorithm. The stability of the control system is guaranteed based on the Lyapunov theory and the trajectory tracking control simulation is performed. The simulation results are compared with the proportional plus derivative（PD） controller, and the effectiveness to achieve better trajectory tracking performance under different gravity environment without changing the control parameters and the advantage of the proposed controller are verified.

Fuzzy adaptive sliding mode controller for electrically driven wheeled mobile robot for trajectory tracking task

This paper presents a fuzzy adaptive sliding mode controller(FASMC)for electrically driven wheeled mobile robot for trajectory tracking task in the presence of uncertainties and disturbances.First,a finite-time kinematic controller is developed to compute the auxiliary velocity vector.Second,the FASMC,based on the nonlinear dynamic model of the robot and its actuators,is used to guarantee the stability and the convergence of the closed-loop system.Moreover,by employing the advantages of the fuzzy logic systems,the developed controller ensures the robustness of the system against dynamic disturbances and uncertainties,the smoothness of the computing voltage against the chattering phenomenon,and the optimal convergence of the velocity and posture errors.The Lyapunov theory is used to analyse the stability of this algorithm.In order to evaluate the effectiveness of the developed method,numerical simulations are done in the Mahlab/Simulink environment.

Tracking Control of Uncertain High-Order Nonlinear Systems with Odd Rational Powers and the Dead-Zone Input:A Direct Fuzzy Adaptive Control Method

This work studies the tracking issue of uncertain nonlinear systems.The existence of odd rational powers,multiple unknown parameters and the dead-zone input add many difficulties for control design.During procedures of the control design,by introducing an appropriate Lyapunov function,utilizing recursive control method and the inequality technique,some appropriate intermediate auxiliary control laws are designed under the hypothesis that nonlinear terms in the system are known.When those nonlinear terms are unknown,by employing the powerful approximation ability of fuzzy systems,the intermediate auxiliary control laws are approximated recursively and used to construct the virtual control.Finally,a new fuzzy adaptive tracking controller is constructed to ensure a small tracking error and the boundedness of all states.In this paper,the overparameterization problem is significantly avoided since only two adaptive laws are adopted.Numerical and practical examples are used to verify the raised theory.

Fuzzy adaptive tracking control within the full envelope for an unmanned aerial vehicle

Motivated by the autopilot of an unmanned aerial vehicle（UAV） with a wide flight envelope span experiencing large parametric variations in the presence of uncertainties, a fuzzy adaptive tracking controller（FATC） is proposed. The controller consists of a fuzzy baseline controller and an adaptive increment, and the main highlight is that the fuzzy baseline controller and adaptation laws are both based on the fuzzy multiple Lyapunov function approach, which helps to reduce the conservatism for the large envelope and guarantees satisfactory tracking performances with strong robustness simultaneously within the whole envelope. The constraint condition of the fuzzy baseline controller is provided in the form of linear matrix inequality（LMI）, and it specifies the satisfactory tracking performances in the absence of uncertainties. The adaptive increment ensures the uniformly ultimately bounded（UUB） predication errors to recover satisfactory responses in the presence of uncertainties. Simulation results show that the proposed controller helps to achieve high-accuracy tracking of airspeed and altitude desirable commands with strong robustness to uncertainties throughout the entire flight envelope.

APPLICATION STUDY ON ADAPTIVE NEURAL FUZZY INFERENCE MODEL IN COMPLEX SOCIAL-TECHNICAL SYSTEM

The adaptive neural fuzzy inference system （ANFIS） is used to make a ease study considering features of complex social-technical system with the target of increasing organizational efficiency of public scientific research institutions. An integrated ANFIS model is built and the effectiveness of the model is verified by means of investigation data and their processing results. The model merges the learning mechanism of neural network and the language inference ability of fuzzy system, and thereby remedies the defects of neural network and fuzzy logic system. Result of this case study shows that the model is suitable for complicated socio-technical systems and has bright application perspective to solve such problems of prediction, evaluation and policy-making in managerial fields.

ADAPTIVE FUZZY CONTROL FOR ROBOT ARM MANIPULATOR WITH 5-DOF

To control the robot and track the designed trajectory with uncertain disturbances in a specified precision range, an adaptive fuzzy control scheme for the robot arm manipulator is discussed. The controller output error method （COEM） is used to design the adaptive fuzzy controller. A few or all of the parameters of the controller are adjusted by using the gradient descent algorithm to minimize the output error. COEM is adopted in the adaptive control system for the robot arm manipulator with 5-DOF. Simulation results show the effectiveness of the method and the real time adjustment of the parameters.

Adaptive Fuzzy Control System of Servomechanism for Electro-Discharge Machining Combined with Ultrasonic Vibration

For electro-discharge machining, only in the optimum state could the highest material removal rate be realized. In practical machining process, the timely elevation of the tool electrode is needed to eliminate chipping, which ordinarily occupies quite a lot of time. Therefore, besides the control of the machining parameters, the control of the optimum discharge gap and the conversion of different machining states is also needed. In this paper, the adaptive fuzzy control system of servomechanism for EDM combined with ultrasonic vibration is studied, the servomechanism of which is composed of the stepping motor comprising variable steps and the inductive synchronizer. The fuzzy control technology is used to realize the control of the frequency and the step of the servomechanism. The adaptive fuzzy controller has three inputs and two outputs, which can well meet the actual control requirements. The constitution of the fuzzy control regulation for the step frequency is the key to the design of the whole fuzzy control system of the servomechanism. The step frequency is mainly determined by the position error and the change rate of the position error. When the value of the position error is high or medium, the controlled parameters are selected to eliminate the error; when the position error is lower, the controlled parameters are selected to avoid the over-orientation and thus keep the stability of the system. According to these, a fuzzy control table is established in advanced, which is used to express the relations between the fuzzy input parameters and the fuzzy output parameters. The input parameters and the output parameters are all expressed by the level-values in fuzzy field. Therefore, the output parameters used for control can be obtained for the fuzzy control table according to the detected actual input parameters, by which the EDM combined with ultrasonic vibration is improved and the machining efficiency is increased. In addition, a stimulation program is designed by means of Microsoft Visual Basic