Fifteen subspecies of the wood tiger moth, Arctia plantaginis (Lepidoptera: Erebidae: Arctiinae), have been recorded in the Northern Hemisphere. An analysis of crude pheromone extracts by GC equipped with an electroan...Fifteen subspecies of the wood tiger moth, Arctia plantaginis (Lepidoptera: Erebidae: Arctiinae), have been recorded in the Northern Hemisphere. An analysis of crude pheromone extracts by GC equipped with an electroantennographic (EAG) detector showed four EAG-active components (Comps. I–IV) that were commonly involved in the pheromone glands of two subspecies inhabiting Japan and Finland. Comp. I is a major component (>75%) and the others are minor components (3% - 15%). Their mass spectra, measured by GC/MS, revealed the chemical structures of C21 unsaturated hydrocarbons as follows: 3,6,9-triene for Comp. I, 4,6,9-triene for Comp. II, 1,3,6,9-tetraene for Comp. III, and 2,4,6,9-tetraene for Comp. IV. Comps. I and III are known Type II pheromone compounds, and their retention times coincide with those of the authentic standards with all Z configurations. As a next step, the extract was analyzed by GC/FT-IR to determine the configuration of Comps. II and IV. Their IR spectra showed two characteristic C-H bending absorptions around 990 and 945 cm-1 due to the conjugated dienyl moieties;thus, Z and E configurations were assigned to the double bonds at the 2- and 4-positions, respectively. Their Z double bonds at the 6- and 9-positions are indicated by no absorptions around 970 cm-1, due to the isolated double bonds with E configurations. Finally, the structures of Comps. II and IV were confirmed by synthesis using a double Wittig reaction. The synthetic (4E,6Z,9Z)-4,6,9-triene and (2Z,4E,6Z,9Z)-2,4,6,9-tetraene showed strong EAG activity, and their chemical data coincided well with those of the natural Comps. II and IV, indicating the correctness of the structure determination by GC/FT-IR analysis and its usefulness for Type II pheromone compounds.展开更多
The global impact of shale oil has revolutionized the world’s energy markets, resulting in significantly lower oil prices, higher global gross domestic product, changing geopolitics and shifted business models for oi...The global impact of shale oil has revolutionized the world’s energy markets, resulting in significantly lower oil prices, higher global gross domestic product, changing geopolitics and shifted business models for oil and gas companies. Further and developed research initiative is required to fill critical gaps in knowledge at the interface of shale oil development along with environmental protection, so countries can prepare better for its energy future. This paper explores the characterization of Iraqi originated oil shale using various analytical techniques, such as mass spectrometry (MS), infrared spectroscopy (IR), and Gas Chromatography Mass Spectrography (GC/MS). Based upon analytical results, it is found that the majority of chemical structure is in aliphatic hydrocarbon forms.展开更多
Plastics wastes from a municipal solid waste (MSW) plant have a high-energy content and are suitable for fuel generation. Thermal cracking is one of the possible ways to obtain petrochemical feedstock from polymer was...Plastics wastes from a municipal solid waste (MSW) plant have a high-energy content and are suitable for fuel generation. Thermal cracking is one of the possible ways to obtain petrochemical feedstock from polymer wastes. Municipal waste plastic of LDPE conversion to kerosene grade fuel experiments were carried out under atmospheric conditions at temperatures between 150℃ and 420℃. Low density polyethylene (LDPE) plastic waste (Code #2) was thermally depolymerized in batch process into stainless steel reactor without adding catalyst. The maximum kerosene grade fuel yield is 30%, other grade fuel 60%, light gas 6% and left over residue 4%. The composition, sulphur and Btu value of liquid products were determined by ASTM method. Produced fuel was analyzed by Gas Chromatography and Mass Spectrometer and FT-IR. Very high conversions from LDPE waste plastic to kerosene grade fuel (up to 35%) were obtained while using this technique. Detailed product analyses and characterization lead to a reasonable explanation of reaction pathways and mechanisms.展开更多
文摘Fifteen subspecies of the wood tiger moth, Arctia plantaginis (Lepidoptera: Erebidae: Arctiinae), have been recorded in the Northern Hemisphere. An analysis of crude pheromone extracts by GC equipped with an electroantennographic (EAG) detector showed four EAG-active components (Comps. I–IV) that were commonly involved in the pheromone glands of two subspecies inhabiting Japan and Finland. Comp. I is a major component (>75%) and the others are minor components (3% - 15%). Their mass spectra, measured by GC/MS, revealed the chemical structures of C21 unsaturated hydrocarbons as follows: 3,6,9-triene for Comp. I, 4,6,9-triene for Comp. II, 1,3,6,9-tetraene for Comp. III, and 2,4,6,9-tetraene for Comp. IV. Comps. I and III are known Type II pheromone compounds, and their retention times coincide with those of the authentic standards with all Z configurations. As a next step, the extract was analyzed by GC/FT-IR to determine the configuration of Comps. II and IV. Their IR spectra showed two characteristic C-H bending absorptions around 990 and 945 cm-1 due to the conjugated dienyl moieties;thus, Z and E configurations were assigned to the double bonds at the 2- and 4-positions, respectively. Their Z double bonds at the 6- and 9-positions are indicated by no absorptions around 970 cm-1, due to the isolated double bonds with E configurations. Finally, the structures of Comps. II and IV were confirmed by synthesis using a double Wittig reaction. The synthetic (4E,6Z,9Z)-4,6,9-triene and (2Z,4E,6Z,9Z)-2,4,6,9-tetraene showed strong EAG activity, and their chemical data coincided well with those of the natural Comps. II and IV, indicating the correctness of the structure determination by GC/FT-IR analysis and its usefulness for Type II pheromone compounds.
文摘The global impact of shale oil has revolutionized the world’s energy markets, resulting in significantly lower oil prices, higher global gross domestic product, changing geopolitics and shifted business models for oil and gas companies. Further and developed research initiative is required to fill critical gaps in knowledge at the interface of shale oil development along with environmental protection, so countries can prepare better for its energy future. This paper explores the characterization of Iraqi originated oil shale using various analytical techniques, such as mass spectrometry (MS), infrared spectroscopy (IR), and Gas Chromatography Mass Spectrography (GC/MS). Based upon analytical results, it is found that the majority of chemical structure is in aliphatic hydrocarbon forms.
文摘Plastics wastes from a municipal solid waste (MSW) plant have a high-energy content and are suitable for fuel generation. Thermal cracking is one of the possible ways to obtain petrochemical feedstock from polymer wastes. Municipal waste plastic of LDPE conversion to kerosene grade fuel experiments were carried out under atmospheric conditions at temperatures between 150℃ and 420℃. Low density polyethylene (LDPE) plastic waste (Code #2) was thermally depolymerized in batch process into stainless steel reactor without adding catalyst. The maximum kerosene grade fuel yield is 30%, other grade fuel 60%, light gas 6% and left over residue 4%. The composition, sulphur and Btu value of liquid products were determined by ASTM method. Produced fuel was analyzed by Gas Chromatography and Mass Spectrometer and FT-IR. Very high conversions from LDPE waste plastic to kerosene grade fuel (up to 35%) were obtained while using this technique. Detailed product analyses and characterization lead to a reasonable explanation of reaction pathways and mechanisms.
