LOCATION OF DOUBLE BOND POSITION OF INSECT SEX PHEROMONE BY GC/MS ANALYSIS WITH CHEMICAL IONIZATION

Ozonolysis products of four lepidopteral pheromone were identified by methane CI-MS.The spectra obtained were notably simpler than those of EI-MS,the peak of molecular ion was normally close to the base peak,and the characteristic fragment ions were high in m/z,thereby the interpretation was facilitated.

GC/MS Analysis of Fractional Extraction of Fusain from Tongting Bituminous Coal in CS_2

Fusain from Tongting (Huaibei, Anhui Province) bituminous (FTTB) coal was fractionally extracted using Soxhlet extractor with CS2. Then the extracts were analyzed with GC/MS. Comparison of experimental data between FTTB coal and clarain from Tongting bituminous (CTTB) coal was carried out. The results show that the kinds of small molecule components detected by GC/MS of FTTB are less than those of CTTB. Long-chain alkanes exist mostly in the extracts of fusain. Macromolecular networks are predominant in the FTTB coal mainly composed of inertinite in the coal petrography. The size of micropores in the FTTB coal is relatively small, and the development of micropores is relatively low. Thus the content of aromatic compounds with affinity for micropores is relative low in FTTB, while the content of long-chain alkanes with affinity for macromolecule networks is relatively high. Sub-components in exinite determine the distribution of long-chain alkanes extracted in the last stage. Odd-numbered carbon distribution appears when resin is most in exinite, while high carbon alkane distribution appears when exinite is dominant in cutinite. Small aromatic molecules are firstly packed in micropores, and exist in a free state after micropores are saturated.

GC/MS Analysis of Organic Compounds in Hot Water-Extractable Fraction from Shenfu Coal

Shenfu Coal was extracted with hot pure water and slurry was isolated. The concentrated benzene-soluble fraction (CBSF) was analyzed with GC/MS and four types of organic compounds (OCs) were detected: HACOCs,DTEs,DMDT and LCAs. The amount of benzyl benzoate which is the most abundant OC was calculated by an inter-nal standard method with an indicated amount of BP. The broken hydrogen bonds and ether bonds were responsible for the extraction of OCs from the coal .DTEs,DMDT and LCAs are essentially insoluble in water,whereas they are soluble,probably owing to intermolecular interaction of OCs with HACOCs.

CS_2 extraction and FTIR & GC/MS analysis of a Chinese brown coal

The abundance of low-rank coals in China, such as bituminous and brown coals, makes studies of their composition and structure of great significance to both coal chemistry research and for efficient utilization of the coal. We describe how a Chinese brown coal was ultrasonically extracted with carbon disulfide (CS2) and the raw and extracted coals were characterized by Fourier Transform Infrared Spectroscopy (FTIR). The corresponding extract was analyzed with a coupled gas chromatograph mass spectrometer (GC/MS). The FTIR analysis shows a great abundance of amidocyanogen, carbonyl, aromatic and hetero aromatic rings and single carbon-heteroatom bonds. This suggests the possible occurrence of compounds like alcohols, phenols, amines, esters, carboxylic acids, ethers, aromatics or heteroaromatics. The GC/MS analysis of the CS2 extract detected 62 compounds, among which the non-polar ones were of lower abundance while the polar ones were in higher abundance and were structurally diverse. This demonstrates the compositional and structural complexity of Shengli coal.

Evaluation of the Equality of Non-Polar Capillary Columns in GC/MS Analysis of Food Contact Plastics

Non-polar capillary columns for GC/MS are widely utilized in the analysis of additives for food contact materials. Though various kinds of non-polar capillary columns are commercially available, the equality of their performance has not been verified. Herein, ninety-six additives for food contact plastics were analyzed using fifteen kinds of columns, and the peak separation, retention times, and peak areas of each additive were compared. The additives, with various chemical properties, comprised forty four plasticizers, twenty lubricants, twenty antioxidants, nine ultraviolet absorbers, and three other compounds. 10 μg.mL-1 test solutions were prepared in acetone, and injected to the GC/MS. The fifteen columns were classified into five categories based on the chromatogram pattern and peak separation. To facilitate comparison of the retention time and detection sensitivity of the columns for the additives, the relative retention time (RRT) and relative peak area (RPA) were calculated by using dibutylphthalate or 4-tert-butylphenylsalicylate as an internal standard. The RRTs of the additives on each column were essentially similar. However, the RRT of the additives which were detected in the later stages differed slightly. Although the RPA of the plasticizers and lubricants were roughly similar, column-to-column differences were observed for certain additives, such as antioxidants and ultraviolet absorbers. Furthermore, certain fatty acids, antioxidants, two plasticizers, and two benzophenone type ultraviolet absorbers were not detected in the chromatograms of two columns.

GC/MS Analysis of Long-Chain Aldehydes from Recent Coral

The main objective of this study is to present the chromatograms and mass spectra of aldehydes so that geochemists could easily identify these compounds in sediment samples. Aldehydes are rare compounds found in the surface environment, particularly in sediments. To date, aldehydes have not been used as environmental proxies. In this study, long-chain aldehydes detected from coral collected from the east coast of Kenya are analyzed by gas chromatography mass spectrometry (GC/MS) using the typical procedure for biomarker analysis. The retention time of the long-chain aldehydes and fatty acid methyl esters slightly overlapped. Hence, the peak corresponding to the aldehyde in the GC chromatogram is buried with that corresponding to the ester, possibly overlooking the aldehyde. After assessing the difference in the retention time between the aldehydes and fatty acids methyl ester, the aldehydes were easily detected using the standard analytical procedure for biomarkers analysis. A molecular ion (M+) with greater than 23 carbon atoms was detected from long-chain aldehydes. The base peak was observed at m/z 82 in the mass spectra of the aldehyde, where characteristic 68 + 14n ions corresponding to even-numbered ions were observed. The M-18 ion, which was formed by the loss of H2O, as well as M-46 or M-84 ions, was characteristic ions observed for long-chain aldehydes of the number of all carbon. The results obtained from this work, in which aldehydes were identified from coral samples, represent a good example of what could be achieved by geochemists when working with sediment samples and using aldehydes as environmental proxies.

Molecular cloning,characterization and promoter analysis of LbgCWIN1 and its expression profiles in response to exogenous sucrose during in vitro bulblet initiation in lily

Lily(Lilium spp.) is an important ornamental flower, which is mainly propagated by bulbs. Cell wall invertases(CWINs), which catalyze the irreversibly conversion of sucrose into glucose and fructose in the extracellular space, are key enzymes participating in sucrose allocation in higher plants. Previous studies have shown that CWINs play an essential role in bulblet initiation process in bulbous crops, but the underlying molecular mechanism remains unclear. Here, a CWIN gene of Lilium brownii var. giganteum(Lbg) was identified and amplified from genomic DNA. Quantitative RT-PCR assays revealed that the expression level of LbgCWIN1 was highly upregulated exactly when the endogenous starch degraded in non-sucrose medium during in vitro bulblet initiation in Lbg. Phylogenetic relationship, motif, and domain analysis of LbgCWIN1 protein and CWINs in other plant species showed that all sequences of these CWIN proteins were highly conserved. The promoter sequence of LbgCWIN1 possessed a number of alpha-amylase-, phytohormone-, light-and stress-responsive cis-elements. Meanwhile, β-glucuronidase(GUS) assay showed that the 459 bp upstream fragment from the translational start site displayed maximal promoter activity. These results revealed that LbgCWIN1 might function in the process of in vitro bulblet initiation and be in the response to degradation of endogenous starch.

Lagrangian coherent structure analysis on transport of Acetes chinensis along coast of Lianyungang,China

Spatial heterogeneity or“patchiness”of plankton distributions in the ocean has always been an attractive and challenging scientific issue to oceanographers.We focused on the accumulation and dynamic mechanism of the Acetes chinensis in the Lianyungang nearshore licensed fishing area.The Lagrangian frame approaches including the Lagrangian coherent structures theory,Lagrangian residual current,and Lagrangian particle-tracking model were applied to find the transport pathways and aggregation characteristics of Acetes chinensis.There exist some material transport pathways for Acetes chinensis passing through the licensed fishing area,and Acetes chinensis is easy to accumulate in the licensed fishing area.The main mechanism forming this distribution pattern is the local circulation induced by the nonlinear interaction of topography and tidal flow.Both the Lagrangian coherent structure analysis and the particle trajectory tracking indicate that Acetes chinensis in the licensed fishing area come from the nearshore estuary.This work contributed to the adjustment of licensed fishing area and the efficient utilization of fishery resources.

Model reduction of fractional impedance spectra for time–frequency analysis of batteries, fuel cells, and supercapacitors

Joint time–frequency analysis is an emerging method for interpreting the underlying physics in fuel cells,batteries,and supercapacitors.To increase the reliability of time–frequency analysis,a theoretical correlation between frequency-domain stationary analysis and time-domain transient analysis is urgently required.The present work formularizes a thorough model reduction of fractional impedance spectra for electrochemical energy devices involving not only the model reduction from fractional-order models to integer-order models and from high-to low-order RC circuits but also insight into the evolution of the characteristic time constants during the whole reduction process.The following work has been carried out:(i)the model-reduction theory is addressed for typical Warburg elements and RC circuits based on the continued fraction expansion theory and the response error minimization technique,respectively;(ii)the order effect on the model reduction of typical Warburg elements is quantitatively evaluated by time–frequency analysis;(iii)the results of time–frequency analysis are confirmed to be useful to determine the reduction order in terms of the kinetic information needed to be captured;and(iv)the results of time–frequency analysis are validated for the model reduction of fractional impedance spectra for lithium-ion batteries,supercapacitors,and solid oxide fuel cells.In turn,the numerical validation has demonstrated the powerful function of the joint time–frequency analysis.The thorough model reduction of fractional impedance spectra addressed in the present work not only clarifies the relationship between time-domain transient analysis and frequency-domain stationary analysis but also enhances the reliability of the joint time–frequency analysis for electrochemical energy devices.

Application of Isogeometric Analysis Method in Three-Dimensional Gear Contact Analysis

Gears are pivotal in mechanical drives,and gear contact analysis is a typically difficult problem to solve.Emerging isogeometric analysis(IGA)methods have developed new ideas to solve this problem.In this paper,a threedimensional body parametric gear model of IGA is established,and a theoretical formula is derived to realize single-tooth contact analysis.Results were benchmarked against those obtained from commercial software utilizing the finite element analysis(FEA)method to validate the accuracy of our approach.Our findings indicate that the IGA-based contact algorithmsuccessfullymet theHertz contact test.When juxtaposed with the FEA approach,the IGAmethod demonstrated fewer node degrees of freedomand reduced computational units,all whilemaintaining comparable accuracy.Notably,the IGA method appeared to exhibit consistency in analysis accuracy irrespective of computational unit density,and also significantlymitigated non-physical oscillations in contact stress across the tooth width.This underscores the prowess of IGA in contact analysis.In conclusion,IGA emerges as a potent tool for addressing contact analysis challenges and holds significant promise for 3D gear modeling,simulation,and optimization of various mechanical components.

Preliminary electromagnetic analysis of the COOL blanket for CFETR

The supercritical CO_(2)cOoled Lithium-Lead(COOL)blanket has been designed as one advanced blanket candidate for the Chinese Fusion Engineering Test Reactor(CFETR).This work focuses on the electromagnetic(EM)loads(Maxwell force and Lorentz force)acting on the COOL blanket,which are important mechanical loads in further structural analysis of the COOL blanket.A 3D electromagnetic analysis is performed using the ANSYS finite element method to obtain EM loads on the COOL blanket in this study.At first,the magnetic scalar potential(MSP)method is used to obtain the magnetic field and the Maxwell force on the COOL blanket.Then,the magnetic vector potential(MVP)method is performed during a plasma disruption event to get the eddy current distribution.At last,a multi-step method is adopted for the calculation of the Lorentz force and the torque.The maximum Lorentz forces of inboard and outboard blanket structural components are 5624 kN and 2360 kN respectively.

SFGA-CPA: A Novel Screening Correlation Power Analysis Framework Based on Genetic Algorithm

Correlation power analysis(CPA)combined with genetic algorithms(GA)now achieves greater attack efficiency and can recover all subkeys simultaneously.However,two issues in GA-based CPA still need to be addressed:key degeneration and slow evolution within populations.These challenges significantly hinder key recovery efforts.This paper proposes a screening correlation power analysis framework combined with a genetic algorithm,named SFGA-CPA,to address these issues.SFGA-CPA introduces three operations designed to exploit CPA characteris-tics:propagative operation,constrained crossover,and constrained mutation.Firstly,the propagative operation accelerates population evolution by maximizing the number of correct bytes in each individual.Secondly,the constrained crossover and mutation operations effectively address key degeneration by preventing the compromise of correct bytes.Finally,an intelligent search method is proposed to identify optimal parameters,further improving attack efficiency.Experiments were conducted on both simulated environments and real power traces collected from the SAKURA-G platform.In the case of simulation,SFGA-CPA reduces the number of traces by 27.3%and 60%compared to CPA based on multiple screening methods(MS-CPA)and CPA based on simple GA method(SGA-CPA)when the success rate reaches 90%.Moreover,real experimental results on the SAKURA-G platform demonstrate that our approach outperforms other methods.

Geometric prior guided hybrid deep neural network for facial beauty analysis

Facial beauty analysis is an important topic in human society.It may be used as a guidance for face beautification applications such as cosmetic surgery.Deep neural networks(DNNs)have recently been adopted for facial beauty analysis and have achieved remarkable performance.However,most existing DNN-based models regard facial beauty analysis as a normal classification task.They ignore important prior knowledge in traditional machine learning models which illustrate the significant contribution of the geometric features in facial beauty analysis.To be specific,landmarks of the whole face and facial organs are introduced to extract geometric features to make the decision.Inspired by this,we introduce a novel dual-branch network for facial beauty analysis:one branch takes the Swin Transformer as the backbone to model the full face and global patterns,and another branch focuses on the masked facial organs with the residual network to model the local patterns of certain facial parts.Additionally,the designed multi-scale feature fusion module can further facilitate our network to learn complementary semantic information between the two branches.In model optimisation,we propose a hybrid loss function,where especially geometric regulation is introduced by regressing the facial landmarks and it can force the extracted features to convey facial geometric features.Experiments performed on the SCUT-FBP5500 dataset and the SCUT-FBP dataset demonstrate that our model outperforms the state-of-the-art convolutional neural networks models,which proves the effectiveness of the proposed geometric regularisation and dual-branch structure with the hybrid network.To the best of our knowledge,this is the first study to introduce a Vision Transformer into the facial beauty analysis task.

Automatic area estimation of algal blooms in water bodies from UAV images using texture analysis

Algal blooms,the spread of algae on the surface of water bodies,have adverse effects not only on aquatic ecosystems but also on human life.The adverse effects of harmful algal blooms(HABs)necessitate a convenient solution for detection and monitoring.Unmanned aerial vehicles(UAVs)have recently emerged as a tool for algal bloom detection,efficiently providing on-demand images at high spatiotemporal resolutions.This study developed an image processing method for algal bloom area estimation from the aerial images(obtained from the internet)captured using UAVs.As a remote sensing method of HAB detection,analysis,and monitoring,a combination of histogram and texture analyses was used to efficiently estimate the area of HABs.Statistical features like entropy(using the Kullback-Leibler method)were emphasized with the aid of a gray-level co-occurrence matrix.The results showed that the orthogonal images demonstrated fewer errors,and the morphological filter best detected algal blooms in real time,with a precision of 80%.This study provided efficient image processing approaches using on-board UAVs for HAB monitoring.

Erratum to:Vibration analysis of a gear-rotor-bearing system with outer-ring spalling and misalignment

Because of an unfortunate mistake during the production of this article,Figure 13 was wrongly inserted.The corrected Figure 13 is shown as follows.

Advances in microfluidic-based DNA methylation analysis

DNA methylation has been extensively investigated in recent years,not least because of its known relationship with various diseases.Progress in analytical methods can greatly increase the relevance of DNA methylation studies to both clinical medicine and scientific research.Microflu-idic chips are excellent carriers for molecular analysis,and their use can provide improvements from multiple aspects.On-chip molecular analysis has received extensive attention owing to its advantages of portability,high throughput,low cost,and high efficiency.In recent years,the use of novel microfluidic chips for DNA methylation analysis has been widely reported and has shown obvious superiority to conventional methods.In this review,wefirst focus on DNA methylation and its applications.Then,we discuss advanced microfluidic-based methods for DNA methylation analysis and describe the great progress that has been made in recent years.Finally,we summarize the advantages that microfluidic technology brings to DNA methylation analysis and describe several challenges and perspectives for on-chip DNA methylation analysis.This review should help researchers improve their understanding and make progress in developing microfluidic-based methods for DNA methylation analysis.

Multi-omics analysis of human tendon adhesion reveals that ACKR1-regulated macrophage migration is involved in regeneration

Tendon adhesion is a common complication after tendon injury with the development of accumulated fibrotic tissues without effective anti-fibrotic therapies,resulting in severe disability.Macrophages are widely recognized as a fibrotic trigger during peritendinous adhesion formation.However,different clusters of macrophages have various functions and receive multiple regulation,which are both still unknown.In our current study,multi-omics analysis including single-cell RNA sequencing and proteomics was performed on both human and mouse tendon adhesion tissue at different stages after tendon injury.The transcriptomes of over 74000 human single cells were profiled.As results,we found that SPP1^(+)macrophages,RGCC^(+)endothelial cells,ACKR1^(+)endothelial cells and ADAM12^(+)fibroblasts participated in tendon adhesion formation.Interestingly,despite specific fibrotic clusters in tendon adhesion,FOLR2^(+)macrophages were identified as an antifibrotic cluster by in vitro experiments using human cells.Furthermore,ACKR1 was verified to regulate FOLR2^(+)macrophages migration at the injured peritendinous site by transplantation of bone marrow from Lysm-Cre;R26R^(tdTomato) mice to lethally irradiated Ackr1^(-/-)mice(Ackr1^(-/-)chimeras;deficient in ACKR1)and control mice(WT chimeras).Compared with WT chimeras,the decline of FOLR2^(+)macrophages was also observed,indicating that ACKR1 was specifically involved in FOLR2^(+)macrophages migration.Taken together,our study not only characterized the fibrosis microenvironment landscape of tendon adhesion by multi-omics analysis,but also uncovered a novel antifibrotic cluster of macrophages and their origin.These results provide potential therapeutic targets against human tendon adhesion.

Stability Analysis of Inverse Lax-Wendroff Procedure for a High order Compact Finite Difference Schemes

This paper considers the finite difference(FD)approximations of diffusion operators and the boundary treatments for different boundary conditions.The proposed schemes have the compact form and could achieve arbitrary even order of accuracy.The main idea is to make use of the lower order compact schemes recursively,so as to obtain the high order compact schemes formally.Moreover,the schemes can be implemented efficiently by solving a series of tridiagonal systems recursively or the fast Fourier transform(FFT).With mathematical induction,the eigenvalues of the proposed differencing operators are shown to be bounded away from zero,which indicates the positive definiteness of the operators.To obtain numerical boundary conditions for the high order schemes,the simplified inverse Lax-Wendroff(SILW)procedure is adopted and the stability analysis is performed by the Godunov-Ryabenkii method and the eigenvalue spectrum visualization method.Various numerical experiments are provided to demonstrate the effectiveness and robustness of our algorithms.

Privacy Protection in COVID Data Tracking: Textual Analysis of the Literature

The literary review presented in the following paper aims to analyze the tracking tools used in different countries during the period of the COVID-19 pandemic. Tracking apps that have been adopted in many countries to collect data in a homogeneous and immediate way have made up for the difficulty of collecting data and standardizing evaluation criteria. However, the regulation on the protection of personal data in the health sector and the adoption of the new General Data Protection Regulation in European countries has placed a strong limitation on their use. This has not been the case in non-European countries, where monitoring methodologies have become widespread. The textual analysis presented is based on co-occurrence and multiple correspondence analysis to show the contact tracing methods adopted in different countries in the pandemic period by relating them to the issue of privacy. It also analyzed the possibility of applying Blockchain technology in applications for tracking contagions from COVID-19 and managing health data to provide a high level of security and transparency, including through anonymization, thus increasing user trust in using the apps.

Trends and hotspots in gastrointestinal neoplasms risk assessment: A bibliometric analysis from 1984 to 2022

BACKGROUND Gastrointestinal neoplasm(GN)significantly impact the global cancer burden and mortality,necessitating early detection and treatment.Understanding the evolution and current state of research in this field is vital.AIM To conducts a comprehensive bibliometric analysis of publications from 1984 to 2022 to elucidate the trends and hotspots in the GN risk assessment research,focusing on key contributors,institutions,and thematic evolution.METHODS This study conducted a bibliometric analysis of data from the Web of Science Core Collection database using the"bibliometrix"R package,VOSviewer,and CiteSpace.The analysis focused on the distribution of publications,contributions by institutions and countries,and trends in keywords.The methods included data synthesis,network analysis,and visualization of international collaboration networks.RESULTS This analysis of 1371 articles on GN risk assessment revealed a notable evolution in terms of research focus and collaboration.It highlights the United States'critical role in advancing this field,with significant contributions from institutions such as Brigham and Women's Hospital and the National Cancer Institute.The last five years,substantial advancements have been made,representing nearly 45%of the examined literature.Publication rates have dramatically increased,from 20 articles in 2002 to 112 in 2022,reflecting intensified research efforts.This study underscores a growing trend toward interdisciplinary and international collaboration,with the Journal of Clinical Oncology standing out as a key publication outlet.This shift toward more comprehensive and collaborative research methods marks a significant step in addressing GN risks.CONCLUSION This study underscores advancements in GN risk assessment through genetic analyses and machine learning and reveals significant geographical disparities in research emphasis.This calls for enhanced global collaboration and integration of artificial intelligence to improve cancer prevention and treatment accuracy,ultimately enhancing worldwide patient care.