The modified empirical two-temperature model of surface burning on a foam metal matrix was proposed. The comparative experimental studies of radiation properties of both matrices without and with ceramic coating (alum...The modified empirical two-temperature model of surface burning on a foam metal matrix was proposed. The comparative experimental studies of radiation properties of both matrices without and with ceramic coating (alumina) were carried out. Measurement was conducted in different spectral ranges. The experimental results were compared with theoretical calculations. It was shown that the integral radiation efficiency of the matrix with ceramic coating was comparable with radiation efficiency of the matrix without any coating in the wide range of the firing rate and surpassed it on 30% - 40% at firing rate above 50 W/cm2.展开更多
With continuous enhancement of gas-turbine inlet temperature and rapid increase of radiant heat transfer,thermal barrier coating(TBC)materials with a combination of low thermal conductivity and good high-temperature t...With continuous enhancement of gas-turbine inlet temperature and rapid increase of radiant heat transfer,thermal barrier coating(TBC)materials with a combination of low thermal conductivity and good high-temperature thermal radiation shielding performance play vital roles in ensuring the durability of metallic blades.However,yttria-stabilized zirconia(YSZ),as the state-of-the-art TBC and current industry standard,is unable to meet such demands since it is almost translucent to high-temperature thermal radiation.Besides,poor corrosion resistance of YSZ to molten calcia-magnesia-alumina-silicates(CMAS)also impedes its application in sand,dust,or volcanic ash laden environments.In order to improve the hightemperature thermal radiation shielding performance and CMAS resistance of YSZ and further reduce its thermal conductivity,two medium-entropy(ME)oxide ceramics,ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)and ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2),were designed and prepared by pressureless sintering of binary powder compacts in this work.ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)presents cubic structure but a trace amount of secondary phase,while ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)displays a combination of tetragonal phase(81.6 wt.%)and cubic phase(18.4 wt.%).Both ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)and ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)possess better high-temperature thermal radiation shielding performance than YSZ.Especially,the high-temperature thermal radiation shielding performance of ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)is superior to that of ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)due to its narrower band gap and correspondingly higher infrared absorbance(above 0.7)at the waveband of 1 to 5μm.The two ME oxides also display significantly lower thermal conductivity than YSZ and close thermal expansion coefficients(TECs)to YSZ and Ni-based superalloys.In addition,the two ME oxides possess excellent CMAS resistance.After attack by molten CMAS at 1250℃for 4 h,merely~2μm thick penetration layer has been formed and the structure below the penetration layer is still intact.These results demonstrate that ME(Me,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)(Me=Y and Ta),especially ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2),are promising thermal barrier materials for high-temperature thermal radiation shielding and CMAS blocking.展开更多
文摘The modified empirical two-temperature model of surface burning on a foam metal matrix was proposed. The comparative experimental studies of radiation properties of both matrices without and with ceramic coating (alumina) were carried out. Measurement was conducted in different spectral ranges. The experimental results were compared with theoretical calculations. It was shown that the integral radiation efficiency of the matrix with ceramic coating was comparable with radiation efficiency of the matrix without any coating in the wide range of the firing rate and surpassed it on 30% - 40% at firing rate above 50 W/cm2.
基金financially supported by the National Natural Science Foundation of China(No.51772275 and No.51972089)Distinguished Young Foundation of Henan Province(No.202300410355)。
文摘With continuous enhancement of gas-turbine inlet temperature and rapid increase of radiant heat transfer,thermal barrier coating(TBC)materials with a combination of low thermal conductivity and good high-temperature thermal radiation shielding performance play vital roles in ensuring the durability of metallic blades.However,yttria-stabilized zirconia(YSZ),as the state-of-the-art TBC and current industry standard,is unable to meet such demands since it is almost translucent to high-temperature thermal radiation.Besides,poor corrosion resistance of YSZ to molten calcia-magnesia-alumina-silicates(CMAS)also impedes its application in sand,dust,or volcanic ash laden environments.In order to improve the hightemperature thermal radiation shielding performance and CMAS resistance of YSZ and further reduce its thermal conductivity,two medium-entropy(ME)oxide ceramics,ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)and ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2),were designed and prepared by pressureless sintering of binary powder compacts in this work.ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)presents cubic structure but a trace amount of secondary phase,while ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)displays a combination of tetragonal phase(81.6 wt.%)and cubic phase(18.4 wt.%).Both ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)and ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)possess better high-temperature thermal radiation shielding performance than YSZ.Especially,the high-temperature thermal radiation shielding performance of ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)is superior to that of ME(Y,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)due to its narrower band gap and correspondingly higher infrared absorbance(above 0.7)at the waveband of 1 to 5μm.The two ME oxides also display significantly lower thermal conductivity than YSZ and close thermal expansion coefficients(TECs)to YSZ and Ni-based superalloys.In addition,the two ME oxides possess excellent CMAS resistance.After attack by molten CMAS at 1250℃for 4 h,merely~2μm thick penetration layer has been formed and the structure below the penetration layer is still intact.These results demonstrate that ME(Me,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2)(Me=Y and Ta),especially ME(Ta,Ti)_(0.1)(Zr,Hf,Ce)_(0.9)O_(2),are promising thermal barrier materials for high-temperature thermal radiation shielding and CMAS blocking.
