The real-time dynamic deformation monitoring of offshore platforms under environmental excitation is crucial to their safe operation.Although Global Navigation Satellite System-Precise Point Positioning(GNSS-PPP)has b...The real-time dynamic deformation monitoring of offshore platforms under environmental excitation is crucial to their safe operation.Although Global Navigation Satellite System-Precise Point Positioning(GNSS-PPP)has been considered for this purpose,its monitoring accuracy is relatively low.Moreover,the influence of background noise on the dynamic monitoring accuracy of GNSS-PPP remains unclear.Hence,it is imperative to further validate the feasibility of GNSS-PPP for deformation monitoring of offshore platforms.To address these concerns,vibration table tests with different amplitudes and frequencies are conducted.The results demonstrate that GNSS-PPP can effectively monitor horizontal vibration displacement as low as±30 mm,which is consistent with GNSS-RTK.Furthermore,the spectral characteristic of background noise in GNSS-PPP is similar to that of GNSS-RTK(Real Time Kinematic).Building on this observation,an improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN)has been proposed to de-noise the data and enhance the dynamic monitoring accuracy of GNSS-PPP.Field monitoring application research is also undertaken,successfully extracting and analyzing the dynamic deformation of an offshore platform structure under environmental excitation using GNSS-PPP monitoring in conjunction with improved CEEMDAN de-noising.By comparing the de-noised dynamic deformation trajectories of the offshore platform during different periods,it is observed that the platform exhibits reversible alternating vibration responses under environmental excitation,with more pronounced displacement deformation in the direction of load action.The research results confirm the feasibility and potential of GNSS-PPP for dynamic deformation monitoring of offshore platforms.展开更多
The recent advances in GNSS positioning of the recent decades have been possible by the development of increasingly efficient software and online calculation tools. The differences between these online PPP calculation...The recent advances in GNSS positioning of the recent decades have been possible by the development of increasingly efficient software and online calculation tools. The differences between these online PPP calculation tools result in a different level of performance. Our study shows that for 24-hour or 6-hour observation time, the Canadian Spatial Reference System for PPP (CSRS-PPP), CenterPoint RTX Post-Processing (RTX), Magic/GNSS, Institut Geographique National-PPP (IGN-PPP) and RTKLIB tools have almost similar level of performance with International Terrestrial Reference Frame (ITRF) solutions considered as reference solution. Average deviations on the three components X, Y and Z for the different tools compared to ITRF solutions do not exceed 1 cm. However, the CSRS-PPP tool gives deviations of less than 5 mm. Calculations from the observations of 2 h and 1 h show that the RTX and CSRS-PPP tools keep deviations similar to those obtained with 24 h and 6 h, while RTKLIB and IGN-PPP give deviations exceeding 6 cm and sometimes failures of some calculations for IGN-PPP.展开更多
近年来,高时空分辨率的全球导航卫星系统(GNSS)观测信号已成为电离层研究的重要资源.利用GNSS研究电离层,需首先将观测资料转换成包含电离层信息的可观测量(Ionospheric Observables,称之为"电离层观测值").目前,最常用的电...近年来,高时空分辨率的全球导航卫星系统(GNSS)观测信号已成为电离层研究的重要资源.利用GNSS研究电离层,需首先将观测资料转换成包含电离层信息的可观测量(Ionospheric Observables,称之为"电离层观测值").目前,最常用的电离层观测值一般采用联合无几何影响组合的码和相位观测,利用相位平滑伪距方法计算得到(称之为"平滑电离层观测值"),但该过程易受平滑弧段长度和与测站有关的误差(如多路径效应和观测噪声)的影响.本文提出利用精密单点定位(Precise Point Positioning,PPP)提取电离层观测值(称之为"PPP电离层观测值",形式与平滑电离层观测值相同).与相位平滑伪距相比,IGS发布的卫星轨道、钟差产品可被PPP合理利用,从而有效减少了待估参数,使得电离层观测值的估计精度得到改善.基于短基线和零基线实验,通过考察两类电离层观测值的站间单差结果在各卫星弧段间的离散程度,验证了PPP电离层观测值的可靠性:以某两天的短基线实验结果为例,与测站有关的误差对PPP电离层观测值的影响分别为对平滑电离层观测值影响的44.4%和35.7%,表明PPP电离层观测值更利于高精度电离层建模、预报等研究.展开更多
基金financially supported by the National Key R&D Program of China(Grant No.2022YFB4200705)the National Natural Science Foundation of China(Grant No.52109146)。
文摘The real-time dynamic deformation monitoring of offshore platforms under environmental excitation is crucial to their safe operation.Although Global Navigation Satellite System-Precise Point Positioning(GNSS-PPP)has been considered for this purpose,its monitoring accuracy is relatively low.Moreover,the influence of background noise on the dynamic monitoring accuracy of GNSS-PPP remains unclear.Hence,it is imperative to further validate the feasibility of GNSS-PPP for deformation monitoring of offshore platforms.To address these concerns,vibration table tests with different amplitudes and frequencies are conducted.The results demonstrate that GNSS-PPP can effectively monitor horizontal vibration displacement as low as±30 mm,which is consistent with GNSS-RTK.Furthermore,the spectral characteristic of background noise in GNSS-PPP is similar to that of GNSS-RTK(Real Time Kinematic).Building on this observation,an improved Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN)has been proposed to de-noise the data and enhance the dynamic monitoring accuracy of GNSS-PPP.Field monitoring application research is also undertaken,successfully extracting and analyzing the dynamic deformation of an offshore platform structure under environmental excitation using GNSS-PPP monitoring in conjunction with improved CEEMDAN de-noising.By comparing the de-noised dynamic deformation trajectories of the offshore platform during different periods,it is observed that the platform exhibits reversible alternating vibration responses under environmental excitation,with more pronounced displacement deformation in the direction of load action.The research results confirm the feasibility and potential of GNSS-PPP for dynamic deformation monitoring of offshore platforms.
文摘The recent advances in GNSS positioning of the recent decades have been possible by the development of increasingly efficient software and online calculation tools. The differences between these online PPP calculation tools result in a different level of performance. Our study shows that for 24-hour or 6-hour observation time, the Canadian Spatial Reference System for PPP (CSRS-PPP), CenterPoint RTX Post-Processing (RTX), Magic/GNSS, Institut Geographique National-PPP (IGN-PPP) and RTKLIB tools have almost similar level of performance with International Terrestrial Reference Frame (ITRF) solutions considered as reference solution. Average deviations on the three components X, Y and Z for the different tools compared to ITRF solutions do not exceed 1 cm. However, the CSRS-PPP tool gives deviations of less than 5 mm. Calculations from the observations of 2 h and 1 h show that the RTX and CSRS-PPP tools keep deviations similar to those obtained with 24 h and 6 h, while RTKLIB and IGN-PPP give deviations exceeding 6 cm and sometimes failures of some calculations for IGN-PPP.
文摘近年来,高时空分辨率的全球导航卫星系统(GNSS)观测信号已成为电离层研究的重要资源.利用GNSS研究电离层,需首先将观测资料转换成包含电离层信息的可观测量(Ionospheric Observables,称之为"电离层观测值").目前,最常用的电离层观测值一般采用联合无几何影响组合的码和相位观测,利用相位平滑伪距方法计算得到(称之为"平滑电离层观测值"),但该过程易受平滑弧段长度和与测站有关的误差(如多路径效应和观测噪声)的影响.本文提出利用精密单点定位(Precise Point Positioning,PPP)提取电离层观测值(称之为"PPP电离层观测值",形式与平滑电离层观测值相同).与相位平滑伪距相比,IGS发布的卫星轨道、钟差产品可被PPP合理利用,从而有效减少了待估参数,使得电离层观测值的估计精度得到改善.基于短基线和零基线实验,通过考察两类电离层观测值的站间单差结果在各卫星弧段间的离散程度,验证了PPP电离层观测值的可靠性:以某两天的短基线实验结果为例,与测站有关的误差对PPP电离层观测值的影响分别为对平滑电离层观测值影响的44.4%和35.7%,表明PPP电离层观测值更利于高精度电离层建模、预报等研究.