This study aims to develop a system and measurement method for investigating the static and dynamic pressure behavior of compression products. The self-designed measurement system, named "cloth-press" (LLY-5...This study aims to develop a system and measurement method for investigating the static and dynamic pressure behavior of compression products. The self-designed measurement system, named "cloth-press" (LLY-56B), is a direct measurement method, which is based on a rigid hemisphere with three pressure sensors distributed on its surface. The static pressure is measured at predetermined press depth, and the dynamic pressure is measured under the processing of fabric 3D deformation. The pressure distributions at the basic three sites are accepted as the measurement results. The measurement results provide much information in the field of compression fabric assessment, and the measurement system can be used in scientific research institutes and factories, contributing to optimize process parameters and quality control of compression garment.展开更多
Static cracking agent(SCA)is actively investigated as an alternative to explosive blasting for rock breakage due to its immense expansion property.SCA can eliminate the negative effects of shock,noise and harmful gase...Static cracking agent(SCA)is actively investigated as an alternative to explosive blasting for rock breakage due to its immense expansion property.SCA can eliminate the negative effects of shock,noise and harmful gases encountered in explosive blasting processes.Accurate measurement and deep understanding of the expansive properties of SCAs are important in their industrial application.An improved outer pipe method(OPM),termed the upper end surface method(UESM),is proposed in this paper to overcome the shortcomings of the OPM in the expansive pressure measurement of SCAs.Numerical simulation is used to proof the concept and a mathematical model established to relate the internal pressure and the radial strains at different positions in the upper end surface method test equipment.The new equipment is calibrated using oil pressure and strain measurements.The calibrated equipment is then used to measure the expansion pressure of SCA at three different water contents to proof its potential.The differences in the measurements with OPM and UESM at three different moisture contents are less than 4%.The experimental results confirm the accuracy and applicability of the more user friendly and less expensive UESM in the measurement of the expansive pressures of SCAs.展开更多
The theory of static filtering in successive steps with colored noises is ample scope for its application in the procedure of GPS data processing. A majority of error and round-cycle distinctness in the measurements o...The theory of static filtering in successive steps with colored noises is ample scope for its application in the procedure of GPS data processing. A majority of error and round-cycle distinctness in the measurements of GPS carrier phase can be eliminated through three times of differential calculations of stations, satellites and epochs, in which the cycle beatings became isolated values. The observation error of three-differentials in the intervals between epochs results in block diagonal matrixes in the covariance matrixes, so that the desired matrixes occupy too large memory and the processing time is too long. Therefore, by using the theory of static filtering in successive steps with colored noises, the interrelation can be eliminated and can save the processing time and memory.展开更多
Fast Radio Bursts from far away galaxies have travelled through the IGM and provide a tool to study its composition. Presently there are 23 FRB’s whose host galaxies have been identified and the redshift found. This ...Fast Radio Bursts from far away galaxies have travelled through the IGM and provide a tool to study its composition. Presently there are 23 FRB’s whose host galaxies have been identified and the redshift found. This gives us the opportunity to test Dispersion Measure versus redshift predictions made by two models. The Macquart relation for an expanding Universe and the New Tired Light relationship in a static universe. In New Tired Light, redshifts are produced when a photon is absorbed and re-emitted by the electrons in the IGM which recoil on both occasions. Some of the energy of the photon has been transferred to the kinetic energy of the recoiling electron. The photon has less energy, a lower frequency and a longer wavelength. It has been redshifted. Since dispersion is due to an interaction between radio signals and these same electrons one would expect a direct relationship between DM and redshift in the New Tired light model. The relation is DM=(mec/2hre)ln(1+z)and contains no adjustable parameters—just a combination of universal constants related to the electron and photon. Notice that the relation is independent of the electron number density ne since a change in ne affects both the DM and redshift equally. A graph of DM versus ln(1 + z) will be a straight line of gradient (mec/2hre)and, using SI units, substituting for the constants gives 7.318 × 1025 m−2. Using the data from the 23 well localized FRB’s, with the weighting of the DM’s for expansion removed (so that the data corresponds to a static universe), a graph of DM versus ln(1 + z) has a gradient of 6.7 × 1025 m−2—9% below the predicted (mec/2hre). The Macquart relation involves highly processed data and adjustable parameters to allow for “dark energy” and “dark matter” (neither of which has yet been found) and can be reduced to DM = 850z (in units of pc∙cm−3). Using the data from this set of localized FRB’s gives a trendline with gradient 1.10 × 103 pc∙cm−3—almost 30% higher than that predicted in an expanding universe model. The FRB data clearly comes down in favour of a static universe rather than an expanding one. Combining the DM-z relationship for the 23 well localized FRB’s, with the Hubble diagram, drawn using the NED-D compilation of redshift independent extragalactic distances, produces a value of “ne” the mean electron number density of the IGM, of ne=0.48 m−3close to the value ne=0.5 m−3, long since predicted by NTL.展开更多
Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorit...Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorithms, several different 3D electronic speckle pattern interferometry（ESPl） systems for displacement and strain measurements have been achieved and commercialized. This paper provides a review of the recent developments in ESPI systems for 3D displacement and strain measurement. After an overview of the fundamentals of ESP! theory, temporal phase-shift, and spatial phase-shift techniques, 3D deformation measurements by the temporal phase-shift ESPI system, which is suited well for static measurement, and by the spatial phase-shift ESPI system, which is particularly useful for dynamic measurement, are discussed. For each method, the basic theory, a brief derivation and different optical layouts are presented. The state of art application, potential and limitation of the ESPI systems are shown and demonstrated.展开更多
The staticε-consensus problem for a high-order linear multi-agent system is studied over a connected undirected communication topology,in which the state measurements of neighbors are affected by unknown but bounded(...The staticε-consensus problem for a high-order linear multi-agent system is studied over a connected undirected communication topology,in which the state measurements of neighbors are affected by unknown but bounded(UBB)noises.Using the dead-zone function and binomial coefficients,we propose a distributed consensus protocol.Under this protocol,all agents achieve staticε-consensus,i.e.,the first components of the states for each agent reachε-consensus,and the remaining components reach agreement at zero.Numerical examples illustrate the validity of the theoretical results.展开更多
Synchronized distributed measurements of mode parameters create a technical feasibility for development and implementing new technologies of control the mode stability and the admissibility of EPS （electric power sys...Synchronized distributed measurements of mode parameters create a technical feasibility for development and implementing new technologies of control the mode stability and the admissibility of EPS （electric power system） mode. Discussion will focus on different models obtained from data synchronized measurements for operational and automatic emergency control without EPS being totally controlled. According to the proposed technology, the generator＇s output power restrictions are determined in real-time by the terms a static stability using the generators＇ mode model as a multipole with connection nodes of generators＇ electromotive forces （the matrix of SMA （self and mutual admittances） of electromotive forces of generators）. Potential applications of the technology are distribution network with the main substation and generators of commensurable capacity, and transmission network with large power plants （generators） distributed into the network. The one-level control system for all of generators with defining the generator＇s power limits relative to the main substation is implemented in the first case. In the second case, the two-level control system is brought in, based on the separation of large and small generation motion. The results of the method and technology efficiency verification are shown in the paper, by both computer simulations of the power system modes and its physical model.展开更多
文摘This study aims to develop a system and measurement method for investigating the static and dynamic pressure behavior of compression products. The self-designed measurement system, named "cloth-press" (LLY-56B), is a direct measurement method, which is based on a rigid hemisphere with three pressure sensors distributed on its surface. The static pressure is measured at predetermined press depth, and the dynamic pressure is measured under the processing of fabric 3D deformation. The pressure distributions at the basic three sites are accepted as the measurement results. The measurement results provide much information in the field of compression fabric assessment, and the measurement system can be used in scientific research institutes and factories, contributing to optimize process parameters and quality control of compression garment.
基金funded by the State Key Research Development Program of China(No.2018YFC0604400)the National Science Foundation of China(Nos.51874068,52074062)+2 种基金the Fundamental Research Funds for the Central Universities(Nos.N2001003,N160107001,N180701016,N182608003,N2001001)the 111 Project(No.B17009)The authors also acknowledge Nazarbayev University for funding the research through its Collaborative Research Program(No.OPCRP2020014).
文摘Static cracking agent(SCA)is actively investigated as an alternative to explosive blasting for rock breakage due to its immense expansion property.SCA can eliminate the negative effects of shock,noise and harmful gases encountered in explosive blasting processes.Accurate measurement and deep understanding of the expansive properties of SCAs are important in their industrial application.An improved outer pipe method(OPM),termed the upper end surface method(UESM),is proposed in this paper to overcome the shortcomings of the OPM in the expansive pressure measurement of SCAs.Numerical simulation is used to proof the concept and a mathematical model established to relate the internal pressure and the radial strains at different positions in the upper end surface method test equipment.The new equipment is calibrated using oil pressure and strain measurements.The calibrated equipment is then used to measure the expansion pressure of SCA at three different water contents to proof its potential.The differences in the measurements with OPM and UESM at three different moisture contents are less than 4%.The experimental results confirm the accuracy and applicability of the more user friendly and less expensive UESM in the measurement of the expansive pressures of SCAs.
文摘The theory of static filtering in successive steps with colored noises is ample scope for its application in the procedure of GPS data processing. A majority of error and round-cycle distinctness in the measurements of GPS carrier phase can be eliminated through three times of differential calculations of stations, satellites and epochs, in which the cycle beatings became isolated values. The observation error of three-differentials in the intervals between epochs results in block diagonal matrixes in the covariance matrixes, so that the desired matrixes occupy too large memory and the processing time is too long. Therefore, by using the theory of static filtering in successive steps with colored noises, the interrelation can be eliminated and can save the processing time and memory.
文摘Fast Radio Bursts from far away galaxies have travelled through the IGM and provide a tool to study its composition. Presently there are 23 FRB’s whose host galaxies have been identified and the redshift found. This gives us the opportunity to test Dispersion Measure versus redshift predictions made by two models. The Macquart relation for an expanding Universe and the New Tired Light relationship in a static universe. In New Tired Light, redshifts are produced when a photon is absorbed and re-emitted by the electrons in the IGM which recoil on both occasions. Some of the energy of the photon has been transferred to the kinetic energy of the recoiling electron. The photon has less energy, a lower frequency and a longer wavelength. It has been redshifted. Since dispersion is due to an interaction between radio signals and these same electrons one would expect a direct relationship between DM and redshift in the New Tired light model. The relation is DM=(mec/2hre)ln(1+z)and contains no adjustable parameters—just a combination of universal constants related to the electron and photon. Notice that the relation is independent of the electron number density ne since a change in ne affects both the DM and redshift equally. A graph of DM versus ln(1 + z) will be a straight line of gradient (mec/2hre)and, using SI units, substituting for the constants gives 7.318 × 1025 m−2. Using the data from the 23 well localized FRB’s, with the weighting of the DM’s for expansion removed (so that the data corresponds to a static universe), a graph of DM versus ln(1 + z) has a gradient of 6.7 × 1025 m−2—9% below the predicted (mec/2hre). The Macquart relation involves highly processed data and adjustable parameters to allow for “dark energy” and “dark matter” (neither of which has yet been found) and can be reduced to DM = 850z (in units of pc∙cm−3). Using the data from this set of localized FRB’s gives a trendline with gradient 1.10 × 103 pc∙cm−3—almost 30% higher than that predicted in an expanding universe model. The FRB data clearly comes down in favour of a static universe rather than an expanding one. Combining the DM-z relationship for the 23 well localized FRB’s, with the Hubble diagram, drawn using the NED-D compilation of redshift independent extragalactic distances, produces a value of “ne” the mean electron number density of the IGM, of ne=0.48 m−3close to the value ne=0.5 m−3, long since predicted by NTL.
基金supported by National Natural Science Foundation of China(Grant Nos.51275054,51075116)
文摘Three dimensional（3D） displacements, which can be translated further into 3D strain, are key parameters tor design, manufacturing and quality control. Using different optical setups, phase-shift methods, and algorithms, several different 3D electronic speckle pattern interferometry（ESPl） systems for displacement and strain measurements have been achieved and commercialized. This paper provides a review of the recent developments in ESPI systems for 3D displacement and strain measurement. After an overview of the fundamentals of ESP! theory, temporal phase-shift, and spatial phase-shift techniques, 3D deformation measurements by the temporal phase-shift ESPI system, which is suited well for static measurement, and by the spatial phase-shift ESPI system, which is particularly useful for dynamic measurement, are discussed. For each method, the basic theory, a brief derivation and different optical layouts are presented. The state of art application, potential and limitation of the ESPI systems are shown and demonstrated.
基金National Natural Science Foundation of China(No.12001097)Fundamental Research Funds for the Central Universities,China(No.2232021G-13)。
文摘The staticε-consensus problem for a high-order linear multi-agent system is studied over a connected undirected communication topology,in which the state measurements of neighbors are affected by unknown but bounded(UBB)noises.Using the dead-zone function and binomial coefficients,we propose a distributed consensus protocol.Under this protocol,all agents achieve staticε-consensus,i.e.,the first components of the states for each agent reachε-consensus,and the remaining components reach agreement at zero.Numerical examples illustrate the validity of the theoretical results.
文摘Synchronized distributed measurements of mode parameters create a technical feasibility for development and implementing new technologies of control the mode stability and the admissibility of EPS （electric power system） mode. Discussion will focus on different models obtained from data synchronized measurements for operational and automatic emergency control without EPS being totally controlled. According to the proposed technology, the generator＇s output power restrictions are determined in real-time by the terms a static stability using the generators＇ mode model as a multipole with connection nodes of generators＇ electromotive forces （the matrix of SMA （self and mutual admittances） of electromotive forces of generators）. Potential applications of the technology are distribution network with the main substation and generators of commensurable capacity, and transmission network with large power plants （generators） distributed into the network. The one-level control system for all of generators with defining the generator＇s power limits relative to the main substation is implemented in the first case. In the second case, the two-level control system is brought in, based on the separation of large and small generation motion. The results of the method and technology efficiency verification are shown in the paper, by both computer simulations of the power system modes and its physical model.
