The microstructure evolution and mechanical properties of Mg–6Zn–0.5Ce–xMn(x=0 and 1 wt.%)wrought magnesium alloys were researched,and the morphologies and role of Mn element in the experimental alloys were analyze...The microstructure evolution and mechanical properties of Mg–6Zn–0.5Ce–xMn(x=0 and 1 wt.%)wrought magnesium alloys were researched,and the morphologies and role of Mn element in the experimental alloys were analyzed.The research shows that all of Mn elements form theα-Mn pure phases,which do not participate in the formation of other phases,such as theτ-phases.The mechanical properties of Mn-containing alloys in as-extruded and aged states are superior to Mn-free alloys.During the hot extrusion process,the dispersed fineα-Mn particle phase hinders the migration of grain boundaries and inhibits dynamic recrystallization,which mainly takes effect of grain refining and dispersion hardening.During the aging treatments,the dispersed fineα-Mn particle phase not only hinders the growth of the solution-treated grains,but also becomes the nucleation cores ofβ1 rod-like precipitate phase,which is conducive to increasing the nucleation rate of the precipitate phase.For the aged alloy,the Mn addition mainly takes effect of grain refining and promoting aging strengthening.展开更多
ZnS：Mn thin films are grown on CaN substrates by pulsed laser deposition. The structure, morphology and optical properties are investigated by x-ray diffraction, scanning electron microscopy and photolumineseenee （P...ZnS：Mn thin films are grown on CaN substrates by pulsed laser deposition. The structure, morphology and optical properties are investigated by x-ray diffraction, scanning electron microscopy and photolumineseenee （PL）. The obtained ZnS：Mn thin films are grown in preferred orientation along β-ZnS （111） direction corresponding to crystalline structure of cubic phase. The deposition temperature has an obvious effect on the structure, surface morphology and optical properties of ZnS：Mn thin films. PL measurements show that there are two emission bands located at 44Ohm and 595 nm when the films are deposited at temperatures from 100℃ to 500℃. The relative integrated intensity of the blue emission and orange-red emission is determined by the deposition conditions. At the proper deposition temperature of 300℃, the color coordinate is closest to （0.33, 0.33）. The ZnS：Mn films on CaN substrates can exhibit white light emission.展开更多
Zn-Mn-Cu/SC（U） sorbent was hydrothermally synthesized by ultrasound-assisted high-pressure impregnation method with semi-coke（SC）as support and the mixed solution of zinc nitrate,manganese nitrate and copper nitra...Zn-Mn-Cu/SC（U） sorbent was hydrothermally synthesized by ultrasound-assisted high-pressure impregnation method with semi-coke（SC）as support and the mixed solution of zinc nitrate,manganese nitrate and copper nitrate as active component precursors.The desulfurization performances of hot coal gas on the prepared sorbent at a mid-temperature of 500°C were tested in fixed-bed reactor.Morphology and pore structure of the prepared sorbent were also characterized by TEM,N2adsorption/desorption isotherms and XRD.For comparison,the sorbent of Zn-Mn-Cu/SC prepared by conventional high-pressure impregnation was also evaluated and characterized in order to study the effects of ultrasound treatment.Zn-Mn-Cu/SC（U） sorbent prepared by high-pressure impregnation under ultrasound-assisted condition showed a better desulfurization performance than Zn-Mn-Cu/SC.It could remove H2 S from 1000×10-6m3/m3 to 0.1×10-6m3/m3 at 500°C and maintained for 12.5 h with the sulfur capacity of 7.74%,in which both the breakthrough time and sulfur capacity were about 32% and 51% higher than those of Zn-Mn-Cu/SC sorbent.The introduction of ultrasound during high-pressure impregnation process greatly improved the morphology and pore structure of the sorbent.The ultrasonic treatment made particle size of active components smaller and made them more evenly disperse on semi-coke support,which provided more opportunities to contact with H2S in coal-based gases.However,there were no any difference in compositions and existing forms of active components on the Zn-Mn-Cu/SC and Zn-Mn-Cu/SC（U） sorbents.展开更多
Mn-Zn ferrite powders were produced from low-grade manganese ore(LMO) via the chemical coprecipitation method combined with the ceramic method,after the LMO was leached in sulfuric acid and the obtained solution was p...Mn-Zn ferrite powders were produced from low-grade manganese ore(LMO) via the chemical coprecipitation method combined with the ceramic method,after the LMO was leached in sulfuric acid and the obtained solution was purified.The effect of the pH on the magnetic properties of Mn-Zn ferrite was investigated by the varying pH of the co-precipitation system.The crystal structure and phases of the samples were characterized by X-ray diffraction and infrared spectrum,respectively.The magnetic measurements were carried out on a vibrating sample magnetometer.The optimal sample was obtained with a saturation magnetization of 55.02 emu/g,a coercivity of 8.20 G and a remanent magnetization of1.71 emu/g when pH is 7.5.展开更多
基金supported by the Hunan Provincial Natural Science Foundation,China(No.2023JJ40626)Science and Technology Innovation Program of Hunan Province,China(No.2020RC2080)the National Natural Science Foundation of China(No.51971190)。
基金funded by National Natural Science Foundation of China(Project No.51701172)Foundation of China Railway Eryuan Engineering Group Co.Ltd.(Project No.KYY2020035(21-21))+1 种基金Natural Science Foundation of Hunan Province(Project No.2018JJ3504)China Postdoctoral Science Foundation(Project No.2018M632977).
文摘The microstructure evolution and mechanical properties of Mg–6Zn–0.5Ce–xMn(x=0 and 1 wt.%)wrought magnesium alloys were researched,and the morphologies and role of Mn element in the experimental alloys were analyzed.The research shows that all of Mn elements form theα-Mn pure phases,which do not participate in the formation of other phases,such as theτ-phases.The mechanical properties of Mn-containing alloys in as-extruded and aged states are superior to Mn-free alloys.During the hot extrusion process,the dispersed fineα-Mn particle phase hinders the migration of grain boundaries and inhibits dynamic recrystallization,which mainly takes effect of grain refining and dispersion hardening.During the aging treatments,the dispersed fineα-Mn particle phase not only hinders the growth of the solution-treated grains,but also becomes the nucleation cores ofβ1 rod-like precipitate phase,which is conducive to increasing the nucleation rate of the precipitate phase.For the aged alloy,the Mn addition mainly takes effect of grain refining and promoting aging strengthening.
基金Supported by the Science and Technology Plan Projects of Colleges and Universities in Shandong Province under Grant No J15LN33the Scientific Research Foundation of Binzhou University under Grant No BZXYG1512the Doctoral Scientific Research Foundation of Binzhou University under Grant No 2014Y15
文摘ZnS：Mn thin films are grown on CaN substrates by pulsed laser deposition. The structure, morphology and optical properties are investigated by x-ray diffraction, scanning electron microscopy and photolumineseenee （PL）. The obtained ZnS：Mn thin films are grown in preferred orientation along β-ZnS （111） direction corresponding to crystalline structure of cubic phase. The deposition temperature has an obvious effect on the structure, surface morphology and optical properties of ZnS：Mn thin films. PL measurements show that there are two emission bands located at 44Ohm and 595 nm when the films are deposited at temperatures from 100℃ to 500℃. The relative integrated intensity of the blue emission and orange-red emission is determined by the deposition conditions. At the proper deposition temperature of 300℃, the color coordinate is closest to （0.33, 0.33）. The ZnS：Mn films on CaN substrates can exhibit white light emission.
基金supported by the National Basic Research Program of China(2012CB723105)the National Natural Science Foundation of China(20976117)the Technological Innovation Programs of Higher Education Institutions in Shanxi(2013JYT113)
文摘Zn-Mn-Cu/SC（U） sorbent was hydrothermally synthesized by ultrasound-assisted high-pressure impregnation method with semi-coke（SC）as support and the mixed solution of zinc nitrate,manganese nitrate and copper nitrate as active component precursors.The desulfurization performances of hot coal gas on the prepared sorbent at a mid-temperature of 500°C were tested in fixed-bed reactor.Morphology and pore structure of the prepared sorbent were also characterized by TEM,N2adsorption/desorption isotherms and XRD.For comparison,the sorbent of Zn-Mn-Cu/SC prepared by conventional high-pressure impregnation was also evaluated and characterized in order to study the effects of ultrasound treatment.Zn-Mn-Cu/SC（U） sorbent prepared by high-pressure impregnation under ultrasound-assisted condition showed a better desulfurization performance than Zn-Mn-Cu/SC.It could remove H2 S from 1000×10-6m3/m3 to 0.1×10-6m3/m3 at 500°C and maintained for 12.5 h with the sulfur capacity of 7.74%,in which both the breakthrough time and sulfur capacity were about 32% and 51% higher than those of Zn-Mn-Cu/SC sorbent.The introduction of ultrasound during high-pressure impregnation process greatly improved the morphology and pore structure of the sorbent.The ultrasonic treatment made particle size of active components smaller and made them more evenly disperse on semi-coke support,which provided more opportunities to contact with H2S in coal-based gases.However,there were no any difference in compositions and existing forms of active components on the Zn-Mn-Cu/SC and Zn-Mn-Cu/SC（U） sorbents.
基金financed by the Bureau of Land Resources and Housing Management of Chongqing(Scientific & Technologic Program in 2011)the Science and Technology Bureau of Hengyang(Scientific & Technologic Program in 2013)the State Administration of Work Safety(Scientific & Technologic Program in 2013)
文摘Mn-Zn ferrite powders were produced from low-grade manganese ore(LMO) via the chemical coprecipitation method combined with the ceramic method,after the LMO was leached in sulfuric acid and the obtained solution was purified.The effect of the pH on the magnetic properties of Mn-Zn ferrite was investigated by the varying pH of the co-precipitation system.The crystal structure and phases of the samples were characterized by X-ray diffraction and infrared spectrum,respectively.The magnetic measurements were carried out on a vibrating sample magnetometer.The optimal sample was obtained with a saturation magnetization of 55.02 emu/g,a coercivity of 8.20 G and a remanent magnetization of1.71 emu/g when pH is 7.5.
