Improvement of switching characteristics by substrate bias in AlGaN/AlN/GaN heterostructure field effect transistors

A simple and effective approach to improve the switching characteristics of AlGaN/AlN/GaN heterostructure field effect transistors （HFETs） by applying a voltage bias on the substrate is presented. With the increase of the substrate bias, the OFF-state drain current is much reduced and the ON-state current keeps constant. Both the ON/OFF current ratio and the subthreshold swing are demonstrated to be greatly improved. With the thinned substrate, the improvement of the switching characteristics with the substrate bias is found to be even greater. The above improvements of the switching characteristics are attributed to the interaction between the substrate bias induced electrical field and the bulk traps in the GaN buffer layer, which reduces the conductivity of the GaN buffer layer.

Si and Mg pair-doped interlayers for improving performance of AlGaN/GaN heterostructure field effect transistors grown on Si substrate

We report a novel structure of A1GaN/GaN heterostructure field effect transistors （HFETs） with a Si and Mg pair- doped interlayer grown on Si substrate. By optimizing the doping concentrations of the pair-doped interlayers, the mobility of 2DEG increases by twice for the conventional structure under 5 K due to the improved crystalline quality of the conduction channel. The proposed HFET shows a four orders lower off-state leakage current, resulting in a much higher on/off ratio （ - 10^9）. Further temperature-dependent performance of Schottky diodes revealed that the inhibition of shallow surface traps in proposed HFETs should be the main reason for the suppression of leakage current.

High-performance vertical GaN field-effect transistor with an integrated self-adapted channel diode for reverse conduction

A vertical GaN field-effect transistor with an integrated self-adapted channel diode(CD-FET)is proposed to improve the reverse conduction performance.It features a channel diode(CD)formed between a trench source on the insulator and a P-type barrier layer(PBL),together with a P-shield layer under the trench gate.At forward conduction,the CD is pinched off due to depletion effects caused by both the PBL and the metal-insulator-semiconductor structure from the trench source,without influencing the on-state characteristic of the CD-FET.At reverse conduction,the depletion region narrows and thus the CD turns on to achieve a very low turn-on voltage(V_(F)),preventing the inherent body diode from turning on.Meanwhile,the PBL and P-shield layer can modulate the electric field distribution to improve the off-state breakdown voltage(BV).Moreover,the P-shield not only shields the gate from a high electric field but also transforms part of C_(GD)to CGS so as to significantly reduce the gate charge(Q_(GD)),leading to a low switching loss(E_(switch)).Consequently,the proposed CD-FET achieves a low V_(F)of 1.65 V and a high BV of 1446 V,and V_(F),Q_(GD)and E_(switch)of the CD-FET are decreased by 49%,55%and 80%,respectively,compared with those of a conventional metal-oxide-semiconductor field-effect transistor(MOSFET).

Observation of a Current Plateau in the Transfer Characteristics of InGaN/AlGaN/AlN/GaN Heterojunction Field Effect Transistors

Direct-current transfer characteristics of （InGaN）/A1GaN/A1N/GaN heterojunction field effect transistors （HFETs） are presented. A drain current plateau （IDs = 32.0 mA/mm） for Vcs swept from ＋0.7 V to -0. 6 V is present in the transfer characteristics of InGaN/AIGaN/AIN/GaN HFETs. The theoretical calculation shows the coexistence of two-dimensional electron gas （2DEG） and two-dimensional hole gas （2DHG） in InGaN/AIGaN/A1N/GaN heterostructures, and the screening effect of 2DHG to the 2DEG in the conduction channel can explain this current plateau. Moreover, the current plateau shows the time-dependent behavior when IDs Vcs scans repeated are conducted. The obtained insight provides indication for the design in the fabrication of GaN-based super HFETs.

High-Temperature Performance Analysis of AlGaN/GaN Polarization Doped Field Effect Transistors Based on the Quasi-Multi-Channel Model

We report on the temperature-dependent dc performance of A1GaN/GaN polarization doped field effect transistors （PolFETs）. The rough decrements of drain current and transeonductance with the operation temperature are observed. Compared with the conventional HFETs, the drain current drop of the PolFET is smaller. The transeonductance drop of PolFETs at different gate biases shows different temperature dependences. From the aspect of the unique carrier behaviors of graded AlGaN/GaN heterostructure, we propose a quasi-multi-channel model to investigate the physics behind the temperature-dependent performance of AlGaN/GaN PolFETs.

Monolithic integration of an AlGaN/GaN metal-insulator field-effect transistor with an ultra-low voltage-drop diode for self-protection

In this paper, we present a monolithic integration of a self-protected AlGaN/GaN metal-insulator field-effect transistor （MISFET）. An integrated field-controlled diode on the drain side of the AlGaN/GaN MISFET features a self- protected function for a reverse bias. This diode takes advantage of the recessed-barrier enhancement-mode technique to realize an ultra-low voltage drop and a low turn-ON voltage. In the smart monolithic integration, this integrated diode can block a reverse bias （〉 70 V/μm） and suppress the leakage current （〈 5 × 10-11 A/mm）. Compared with conventional monolithic integration, the numerical results show that the MISET integrated with a field-controlled diode leads to a good performance for smart power integration. And the power loss is lower than 50% in conduction without forward current degeneration.

Determining the influence of ferroelectric polarization on electrical characteristics in organic ferroelectric field-effect transistors

Organic ferroelectric field-effect transistors （OFeFETs） are regarded as a promising technology for low-cost flexible memories. However, the electrical instability is still a critical obstacle, which limits the commercialization process. Based on already established models for polarization in ferroelectrics and charge transport in OFeFETs, simulation work is performed to determine the influence of polarization fatigue and ferroelectric switching transient on electrical characteristics in OFeFETs. The polarization fatigue results in the decrease of the on-state drain current and the memory window width and thus degrades the memory performance. The output measurements during the ferroelectric switching process show a hysteresis due to the instable polarization. In the on/off measurements, a large writing/erasing pulse frequency weakens the polarization modulation and thus results in a small separation between on- and off-state drain currents. According to the electrical properties of the ferroelectric layer, suggestions are given to obtain optimal electrical characterization for OFeFETs.

Electron mobility in the linear region of an AlGaN/AlN/GaN heterostructure field-effect transistor

We simulate the current-voltage （I-V） characteristics of AlGaN/AlN/GaN heterostructure field-effect transistors （HFETs） with different gate lengths using the quasi-two-dimensional （quasi-2D） model. The calculation results obtained using the modified mobility model are found to accord well with the experimental data. By analyzing the variation of the electron mobility for the two-dimensional electron gas （213EG） with the electric field in the linear region of the AlGaN/AlN/GaN HFET I-V output characteristics, it is found that the polarization Coulomb field scattering still plays an important role in the electron mobility of AlGaN/AlN/GaN HFETs at the higher drain voltage and channel electric field. As drain voltage and channel electric field increase, the 2DEG density reduces and the polarization Coulomb field scattering increases, as a result, the 2DEG electron mobility decreases.

Influence of the channel electric field distribution on the polarization Coulomb field scattering in In_(0.18) Al_(0.82) N/AlN/GaN heterostructure field-effect transistors

By making use of the quasi-two-dimensional （quasi-2D） model, the current-voltage （l-V） characteristics of In0AsA10.82N/A1N/GaN heterostructure field-effect transistors （HFETs） with different gate lengths are simulated based on the measured capacitance-voltage （C-V） characteristics and I-V characteristics. By analyzing the variation of the electron mobility for the two-dimensional electron gas （2DEG） with electric field, it is found that the different polarization charge distributions generated by the different channel electric field distributions can result in different polarization Coulomb field scatterings. The difference between the electron mobilities primarily caused by the polarization Coulomb field scatterings can reach up to 1522.9 cm2/V.s for the prepared In0.38AI0.82N/A1N/GaN HFETs. In addition, when the 2DEG sheet density is modulated by the drain-source bias, the electron mobility presents a peak with the variation of the 2DEG sheet density, the gate length is smaller, and the 2DEG sheet density corresponding to the peak point is higher.

Progress of power field effect transistor based on ultra-wide bandgap Ga_2O_3 semiconductor material

As a promising ultra-wide bandgap semiconductor, gallium oxide(Ga_2O_3) has attracted increasing attention in recent years. The high theoretical breakdown electrical field(8 MV/cm), ultra-wide bandgap(～ 4.8 eV) and large Baliga's figure of merit(BFOM) of Ga_2O_3 make it a potential candidate material for next generation high-power electronics, including diode and field effect transistor(FET). In this paper, we introduce the basic physical properties of Ga_2O_3 single crystal, and review the recent research process of Ga_2O_3 based field effect transistors. Furthermore, various structures of FETs have been summarized and compared, and the potential of Ga_2O_3 is preliminary revealed. Finally, the prospect of the Ga_2O_3 based FET for power electronics application is analyzed.

Review of gallium oxide based field-effect transistors and Schottky barrier diodes

Gallium oxide(Ga_2O_3), a typical ultra wide bandgap semiconductor, with a bandgap of ~4.9 e V, critical breakdown field of 8 MV/cm, and Baliga's figure of merit of 3444, is promising to be used in high-power and high-voltage devices.Recently, a keen interest in employing Ga_2O_3 in power devices has been aroused. Many researches have verified that Ga_2O_3 is an ideal candidate for fabricating power devices. In this review, we summarized the recent progress of field-effect transistors(FETs) and Schottky barrier diodes(SBDs) based on Ga_2O_3, which may provide a guideline for Ga_2O_3 to be preferably used in power devices fabrication.

Electrically Tunable Energy Bandgap in Dual-Gated Ultra-Thin Black Phosphorus Field Effect Transistors

The energy bandgap is an intrinsic character of semiconductors, which largely determines their properties. The ability to continuously and reversibly tune the bandgap of a single device during real time operation is of great importance not only to device physics but also to technological applications. Here we demonstrate a widely tunable bandgap of few-layer black phosphorus （BP） by the application of vertical electric field in dual-gated BP field-effect transistors. A total bandgap reduction of 124 meV is observed when the electrical displacement field is increased from 0.10 V/nm to 0.83 V/nm. Our results suggest appealing potential for few-layer BP as a tunable bandgap material in infrared optoelectronies, thermoelectric power generation and thermal imaging.

The study on mechanism and model of negative bias temperature instability degradation in P-channel metal-oxide-semiconductor field-effect transistors

Negative Bias Temperature Instability （NBTI） has become one of the most serious reliability problems of metaloxide-semiconductor field-effect transistors （MOSFETs）. The degradation mechanism and model of NBTI are studied in this paper. From the experimental results, the exponential value 0.25-0.5 which represents the relation of NBTI degradation and stress time is obtained. Based on the experimental results and existing model, the reaction-diffusion model with H^＋ related species generated is deduced, and the exponent 0.5 is obtained. The results suggest that there should be H^＋ generated in the NBTI degradation. With the real time method, the degradation with an exponent 0.5 appears clearly in drain current shift during the first seconds of stress and then verifies that H^＋ generated during NBTI stress.

GaN基HFET电力电子器件的研究

作为第三代宽禁带半导体器件,GaN基HFET功率器件具耐高压、高频、导通电阻小等优良特性,在电力电子器件方面也具有卓越的优势。概述了基于电力电子方面应用的AlGaN/GaN HFET功率器件的研究进展。从器件的结构入手,介绍了AlGaN/GaN HEMT的研究现状,从栅材料的选取以及栅介质层的结构对器件性能的影响着手,对AlGaN/GaN MIS-HFET的研究进行了详细的介绍。分析了场板改善器件击穿特性的原理以及各种场板结构AlGaN/GaNHFET器件的研究进展。论述了实现增强型器件不同的方法。阐述了GaN基HFET功率器件在材料、器件结构、稳定性、工艺等方面所面临的挑战。最后探讨了GaN基HFET功率器件未来的发展趋势。

基于60nmT型栅f_T&f_(max)为170&210 GHz的InAlN/GaN HFETs器件（英文）

基于蓝宝石衬底InAlN/GaN异质结材料研制具有高电流增益截止频率(f_T)和最大振荡频率(f_(max))的InAlN/GaN异质结场效应晶体管(HFETs).基于再生长n+GaN欧姆接触工艺实现了器件尺寸的缩小,有效源漏间距(Lsd)缩小至600nm.此外,采用自对准栅工艺制备60nmT型栅.由于器件尺寸的缩小,在Vgs=1V时,器件最大饱和电流(Ids)达到1.89A/mm,峰值跨导达到462mS/mm.根据小信号测试结果,外推得到器件的f_T和f_(max)分别为170GHz和210GHz,该频率特性为国内InAlN/GaNHFETs器件频率的最高值.

SiC MOSFET开关瞬态解析建模综述

在评估和优化半导体器件开关瞬态特性领域,解析模型因具有简单、直观、应用便捷等优点得到广泛研究。相较同等功率等级的硅基功率器件,碳化硅(silicon carbide,SiC)金属氧化物半导体场效应晶体管(metal-oxide-semiconductor field effect transistor,MOSFET)可以应用于更高开关速度,其开关瞬态特性更为复杂,开关瞬态解析建模也更加困难。该文总结现有的针对SiC MOSFET与二极管换流对的开关瞬态解析建模方法,在建模过程中依次引入各种简化假设,按照简化程度由低到高的顺序,梳理解析建模的逐步简化过程。通过对比,评估各模型的优缺点以及适用场合,对其中准确性、实用性都较强的分段线性模型进行详细介绍;之后,对开关瞬态建模中关键参数的建模方法进行总结与评价;最后,指出现有SiC MOSFET开关瞬态解析模型中存在的问题,并对其未来发展给出建议。

一种GaN FET开关用高压高速驱动器的设计与实现

设计了一种GaN场效应晶体管(FET)开关用高压高速驱动器电路,该电路集成了TTL输入级、高压电平转换级及大功率输出级电路,其主要功能是对输入的TTL信号进行电平转换,输出0 V/负高压信号。输入级采用施密特结构实现输入兼容TTL信号的同时提高了输入噪声容限,电平转换级、输出级对传统电路结构做了改进,转换速度更快,功耗更低。该电路采用标准硅基高压CMOS工艺制造流片,芯片测试结果表明,负电源工作电压为-5^-40 V,静态电流小于10μA,动态电流为5 m A@10 MHz,传输延时小于20 ns。芯片尺寸为1.42 mm×1.83 mm。该电路具有响应速度快、功耗低以及抗噪声能力强等特点,可广泛应用于微波通信系统中。

SiC MOSFET和GaN HEMT的导通电阻可靠性评估

碳化硅金属氧化物半导体场效应管(Si C MOSFET)和氮化镓高电子迁移率晶体管(GaN HEMT)这两种器件内部存在容易捕获电子的"陷阱",会影响导电沟道的性能,进而影响器件的导通电阻。对SiC MOSFET和GaN HEMT各选取了一款典型的商用器件,分别对Si C MOSFET和GaN HEMT的导通电阻可靠性进行了测试。测试结果表明,Si C MOSFET的导通电阻变化量相对小,且应力停止后导通电阻可以恢复到初始状态,这说明其界面态陷阱密度比GaN HEMT更低,因此实际应用中无需考虑导通电阻的稳定性;而GaN HEMT的动态电阻变化较大,这极大地增加了导通损耗,影响系统的可靠性,因此在实际应用中需要考虑导通电阻变化对导通性能的影响。

基于能带调制模型的高压增强型AlGaN/GaN HFET器件

提出了一种能带调制模型,通过在异质结界面处引入负离子电荷(如氟离子)调制异质结处的局部能带分布,实现了对异质结界面处的高密度2DEG的改变。基于能带调制模型,提出了一种复合调制沟道AlGaN/GaNHFET器件。通过在增强型沟道调制区和RESURF调制区分别引入不同剂量的负离子,不仅实现了增强型器件,而且可以降低尖峰电场,优化异质结电场分布,提高器件击穿电压。通过器件仿真软件对其器件工作原理进行了模拟分析,并通过实验结果表明,其器件品质因子FOM由传统器件的4.8MW.cm-2提高到26.7MW.cm-2。

影响AlGaN/GaN HFET器件二维电子气的若干因素

基于Sentaurus Workbench(SWB)TCAD可制造性设计平台进行AlGaN/GaN器件的结构设计和仿真,并对影响二维电子气的重要参数因素进行了研究及优化,诸如AlGaN势垒层中Al组分x、AlGaN势垒层厚度h、应变弛豫度r和栅偏压Vg等因素。参数相关性的制约结果,无疑会反映在对器件物理特性的制约及影响上。研究结果表明,在一定条件下增大势垒层中Al组分和势垒层厚度可以提高器件的电流传输特性。然而随着二者的不断增大将会引起应变弛豫的发生,而应变弛豫的发生会降低器件的性能。