Diagnosing ratio of electron density to collision frequency of plasma surrounding scaled model in a shock tube using low-frequency alternating magnetic field phase shift

A non-contact low-frequency(LF)method of diagnosing the plasma surrounding a scaled model in a shock tube is proposed.This method utilizes the phase shift occurring after the transmission of an LF alternating magnetic field through the plasma to directly measure the ratio of the plasma loop average electron density to collision frequency.An equivalent circuit model is used to analyze the relationship of the phase shift of the magnetic field component of LF electromagnetic waves with the plasma electron density and collision frequency.The applicable range of the LF method on a given plasma scale is analyzed.The upper diagnostic limit for the ratio of the electron density(unit:m^(-3))to collision frequency(unit:Hz)exceeds 1×10^(11),enabling an electron density to exceed 1×10^(20)m^(-3)and a collision frequency to be less than 1 GHz.In this work,the feasibility of using the LF phase shift to implement the plasma diagnosis is also assessed.Diagnosis experiments on shock tube equipment are conducted by using both the electrostatic probe method and LF method.By comparing the diagnostic results of the two methods,the inversion results are relatively consistent with each other,thereby preliminarily verifying the feasibility of the LF method.The ratio of the electron density to the collision frequency has a relatively uniform distribution during the plasma stabilization.The LF diagnostic path is a loop around the model,which is suitable for diagnosing the plasma that surrounds the model.Finally,the causes of diagnostic discrepancy between the two methods are analyzed.The proposed method provides a new avenue for diagnosing high-density enveloping plasma.

Optical design of a novel near-infrared phase contrast imaging(NI-PCI)diagnostic on the HL-2A tokamak

The optical design of near-infrared phase contrast imaging(NI-PCI)diagnosis on HL-2A is introduced in this paper.This scheme benefits from the great progress of near-infrared laser technology and is a broadening of traditional phase contrast technology.This diagnostic can work as a keen tool to measure plasma wavenumber spectra by inferring string-integrated plasma density fluctuations.Design of both the front optical path which is the path before the laser transmitting into the tokamak plasma and the rear optics which is the path after the laser passing through the plasma is detailed.The 1550 nm laser is chosen as the probe beam and highprecision optical components are designed to fit the laser beam,in which a phase plate with a 194-nm-deep silver groove is the key.Compared with the conventional 10.6μm laser-based PCI system on HL-2A,NI-PCI significantly overcomes the unwanted phase scintillation effect and promotes the measurement capability of high-wavenumber turbulence with an increased maximal measurable wavenumber from 15 cm^(-1)to 32.6 cm^(-1).

Velocity Form Calculations of Generalized Oscillator Strengths for 3s→ (3p, 4p, 5p, 6p) Dipole Transitions of Atomic Sodium in Debye Plasma

In this paper, the generalized oscillator strengths (GOSs) of excitations of atomic sodium from ground state to 2p63s0 (3p, 4p, 5p, 6p) states, immersed in Debye plasma, were calculated by using wavefunctions which were obtained numerically from the restricted Hartree-Fock (RHF) equation. This RHF equation employs the local density approach for exchange interactions including plasma Debye screening. Theoretical RHF and random phase approximation with exchange (RPAE) velocity calculations have shown that the GOSs for excitations to 3 s0(3 p,4 p,5 p,6 p)depend on the plasma Debye screening effects, as shown by the reduction in the GOS amplitude with decreasing Debye length λD. The agreement between the present RPAE V results for the transitions 3 s→3 s0(3 p,4 p,5 p)and the length calculations of Martínez-Flores was satisfactory. Correlation effects were found quite to be significant in the vicinity of the maxima of the GOS of the 3 s→3 s0(4 p,5 p,6 p)excitations by using the RPAE V approach. We note the poor influence of many electron correlations on the GOS of (3 s→3 p)transition with the same principal quantum number. Finally, we comment that the RPAE V calculations are useful in investigating electron correlation effects on the transition GOS of atomic sodium planted in Debye plasma. The present velocity results also reveal that the 3 s→3 s0(5p, 6p)transition GOSs tend to be delocalized due to more significant screening effects at Debye lengths λD=20and 30 a.u. for excited subshells 5p and 6p, respectively. We report here novel results of GOS for 3 s→3 s06ptransition obtained from different Debye lengths.

Effect of Plasma Spheroidization Process on the Microstructure and Crystallographic Phases of Silica, Alumina and Nickel Particles

During the plasma spheroidization process powders undergo different changes in their microstructures and crystal phases. In this paper, simple calculation of heat transfer between the plasma and a suspended particle was performed based on three hypotheses for the purpose of guiding experiments. Experimental investigation of the crystal phases and microstructural changes during the plasma processing was made using silica, alumina and nickel powders as starting materials. It has been revealed from the experimental results that these materials undergo different changes in crystal phases and microstructures, and these changes are essentially determined by the structures, properties and aggregate states of the starting materials.

Morphology and Phase Compositions of Hydroxyapatite Powder Particles Plasma-sprayed into Water

Hydroxyapatite powder particles were plasma sprayed into water, their inner structures and phase compositions were studied by using scanning electron microscope(SEM) and X-ray diffractometer. The results show that the molten HA particles have a central hollow morphology and high crystallinity. The hollow morphology was caused by sublimated P2O5 and H2O, which will have an effect on surface morphology, cohesive and adhesive strength as well as dissolution and degradation of coating. The high crystallinity is attributed to lower cooling speed in water.

OES study of the gas phase during diamond films deposition in high power DC arc plasma jet CVD system

This paper used optical emission spectroscopy （OES） to study the gas phase in high power DC arc plasma jet chemical vapour deposition （CVD） during diamond films growth processes. The results show that all the deposition parameters （methane concentration, substrate temperature, gas flow rate and ratio of H2/Ar） could strongly influence the gas phase. C2 is found to be the most sensitive radical to deposition parameters among the radicals in gas phase. Spatially resolved OES implies that a relative high concentration of atomic H exists near the substrate surface, which is beneficial for diamond film growth. The relatively high concentrations of C2 and CH are correlated with high deposition rate of diamond. In our high deposition rate system, C2 is presumed to be the main growth radical, and CH is also believed to contribute the diamond deposition.

Degradation of tetracycline in water by gas-liquid plasma in conjunction with rGO-TiO_(2) nanocomposite

Tetracycline(TC)is an antibiotic mainly used in livestock production and respiratory infection.Traditional methods are not effective in removing TC from solution.In this study,TC was degraded by gas–liquid plasma in the presence of rGO-TiO_(2)in solution.The rGO-TiO_(2)was prepared by modified hummers and hydrothermal method.The electrical and optical properties of the gas–liquid discharge plasma were studied and the produced long-lived reactive species were analyzed by spectrophotometer.The degradation efficiency of TC was improved by 41.4%after plasma treatment for 12 min in presence of 30 mg l-1 r GO-TiO_(2)compared to that with plasma alone.The degradation efficiency increased with increasing discharge power,but as the initial concentration was increased from 20 to 80 mg l-1,the degradation efficiency of TC decreased.The initial p H had no significant effect on the degradation of TC.The intermediate products were determined by UV–vis spectrophotometry and ESI(+)–MS,and the degradation mechanism was analyzed.The reactive species,including O_(3),·OH,and H_(2)O_(2),etc.,produced in the plasma/catalyst system attracted electron-rich functional groups(amino group,aromatic ring,and double bond).Therefore,the gas–liquid plasma/catalyst system could be an effective and promising method for pharmaceutical wastewater treatment in future.

Research on the method of dual-frequency microwave diagnosis of plasma for solving phase integer ambiguity

In this work,microwaves and terahertz waves have performed a dual-frequency combineddiagnosis in high-temperature,large-scale plasma.According to the attenuation and phase shift of electromagnetic waves in the plasma,the electron density and collision frequency of theplasma can be inversely calculated.However,when the plasma size is large and the electron density is high,the phase shift of the electromagnetic wave is large(multiple times 2πperiod).Due to the limitations of the test equipment,the true phase shift is difficult to test accurately or to recover reality.That is,there is a problem of phase integer ambiguity.In order to obtain a phase shift of less than 180°,a higher electromagnetic wave frequency(terahertz wave with 890 GHz)is used for diagnosis.However,the attenuation of the terahertz wave diagnosis is too small(less than 0.1 d B),only the electron density can be obtained,and the collision frequency cannot be accurately obtained.Therefore,a combined diagnosis was carried out by combining twofrequencies(microwave with 36 GHz,terahertz wave with 890 GHz)to obtain electron density and collision frequency.The diagnosis result shows that the electron density is in the range of(0.65–1.5)×1019m^(-3),the collision frequency is in the range of 0.65–2 GHz,and the diagnostic accuracy is about 60%.

Characterization of phase transformation and microstructure of nano hard phase Ti(C,N)-based cermet by spark plasma sintering

By means of optical microscope , scanning electron microscope （SEM） and transmission electron microscope （TEM）, the process of densification, the characterization of phase transformation and the microstructure for spark plasma sintering （SPS） nano hard phase Ti（C,N）-based cermet were investigated. It is found that the spark plasma sintering （SPS） enables the nano hard phase Ti（C,N）-based cermet to densify rapidly, however, the full densification of the sintered samples can not be obtained. The rate of phase transformation is significantly quick. When being sintered at 1 200 ℃ for 8 min, Mo2C is completely dissolved, and TiN dissolves into TiC entirely and disappears. Above 1 200 ℃, Ti（C,N） begins to decompose and the atoms of C and N separate from Ti（C,N） resulting in the generation of N2 and the graphite. Due to the denitrification and the graphitization, the density and the hardness of sintered samples are rather low. The distribution of grain size of the sample sintered at 1 350 ℃ covers a wide range of 90500 nm, and most of the grain size are about 200 nm. The hard phase is not of typical core-rim structure. Oxides on the surface of particles can not be fully removed and present in sample as titanium oxide TiO2. Graphite exists in band-like shape.

Effect of normalized plasma frequency on electron phase-space orbits in a free-electron laser

Irregular phase-space orbits of the electrons are harmful to the electron-beam transport quality and hence deteriorate the performance of a free-electron laser （FEL）. In previous literature, it was demonstrated that the irregularity of the electron phase-space orbits could be caused in several ways, such as varying the wiggler amplitude and inducing sidebands. Based on a Hamiltonian model with a set of self-consistent differential equations, it is shown in this paper that the electron- beam normalized plasma frequency functions not only couple the electron motion with the FEL wave, which results in the evolution of the FEL wave field and a possible power saturation at a large beam current, but also cause the irregularity of the electron phase-space orbits when the normalized plasma frequency has a sufficiently large value, even if the initial energy of the electron is equal to the synchronous energy or the FEL wave does not reach power saturation.

Preparation of CTS Coatings Containing Calcium and Phosphorus on Titanium Surface by the Cathode Liquid Phase Plasma Technology

Chitosan （CTS） coatings contained calcium （Ca） and phosphorus （P） on titanium （Ti） surface are prepared by the cathode liquid phase plasma technology （CLPT）, in a certain concentration electrolyte solution with selective additions of ammonium dihydrogen phosphate and calcium nitrate. It is indicated that the parameters for a stable discharge are voltage of 400 V, frequency of 100 Hz, duty cycle of 30% based on a large amount of experiment data. The morphology, structure and composition of the coated samples are studied by SEM, FTIR, XRD, XPS. The results demonstrate that the composite coatings are uniform, and some solid particles of inorganic salt containing calcium and phosphorus dispersed on the coatings. CA tests show that the samples treated by the liquid plasma became less hydrophilic. The variation of hydrophilicity on the CLPT treated titanium is attributed to the change of the function groups on the sample surface. Meanwhile, a possible formation mechanism of the composite coatings is discussed.

Synthesis of Cu-Doped Mixed-Phase TiO_2 with the Assistance of Ionic Liquid by Atmospheric-Pressure Cold Plasma

An atmospheric-pressure dielectric barrier discharge （DBD） gas-liquid cold plasma was employed to synthesize Cu-doped TiO~ nanoparticles in an aqueous solution with the assistance of [C2MIM]BF4 ionic liquid （IL） and using air as the working gas. The influences of the discharge voltage, IL and the amount of copper nitrite were investigated. X-ray diffraction, N2 adsorption-desorption measurements and UV-Vis spectroscopy were adopted to characterize the samples. The results showed that the specific surface area of TiO2 was promoted with Cu-doping （from 57.6 m^2.g^-1 to 106.2 m^2.g^-1 with 3% Cu-doping）, and the content of anatase was increased. Besides, the band gap energy of TiO~ with Cu-doping decreased according to the UV-Vis spec- troscopy test. The 3%Cu-IL-TiO2 samples showed the highest eificiency in degrading methylene blue （MB） dye solutions under simulated sunlight with an apparent rate constant of 0.0223 min-1, which was 1.2 times higher than that of non-doped samples. According to the characterization results, the reasons for the high photocatalytic activity were discussed.

Simple reactor for the synthesis of silver nanoparticles with the assistance of ethanol by gas-liquid discharge plasma

Atmospheric pressure plasma technology is gaining increasing importance because it is a simple and tunable synthesis process for the production of metallic nanoparticles.In addition to the development of the power supply,improving the reactor is also one of the main strategies to enhanee the utility.In this study,a simple reactor for the gas-liquid discharge plasma induced by argon gas was applied to synthesize silver nanopailicles from silver nitrate(AgNO3)in solution.An AC power supply with a peak voltage of 3.5 kV was used.The frequency and on-time were set to 50 kHz and 2.5“s,respectively.The oscilloscope showed that the rising time was approximately 2“s.The ethanol was used as the source for the reactive reducing agent.No more additional comp on ents existed in the solution during the discharge and neither of the electrodes was in contact with the treated solution.The temperature in creased by 10°C within 1 min without a cooling system.Carbon was the main impurity and was expected to be produced from the decomposition of the organics under the plasma.The elevated temperature decreased the organic by-products by evaporation and could also decrease the production of carbon.Transmission electron microscopy showed that the spherical silver nanoparticles with a size of approximately 10 nm were synthesized with a crystal structure and that a low concentration of ethanol prefers the production of the mono-dispersed colloid.

Phase shift effects of radio-frequency bias on ion energy distribution in continuous wave and pulse modulated inductively coupled plasmas

A retarding field energy analyzer（RFEA） is used to measure the time-averaged ion energy distributions（IEDs） on the substrate in both continuous wave（CW） and synchronous pulse modulated radio-frequency（RF） inductively coupled Ar plasmas（ICPs）.The effects of the phase shift θ between the RF bias voltage and the RF source on the IED is investigated under various discharge conditions.It is found that as θ increases from 0 to π,the IED moves towards the low-energy side,and its energy width becomes narrower.In order to figure out the physical mechanism,the voltage waveforms on the substrate are also measured.The results show that as θ increases from 0 to π,the amplitude of the voltage waveform decreases and,meanwhile,the average sheath potential decreases as well.Specifically,the potential drop in the sheath on the substrate exhibits a maximum value at the same phase（i.e.,θ = 0） and a minimum value at the opposite phase（i.e.,θ = π）.Therefore,when ions traverse across the sheath region above the substrate,they obtain less energies at lower sheath potential drop,leading to lower ion energy.Besides,as θ increases from π to 2π,the IEDs and their energy widths change reversely.

Microstructure characteristics of coating with amorphous phases prepared from Fe-based alloy powders by plasma spray

In this paper, alloy powders mixed with a molar ratio of Fe ： P ： C of 80 ： 13 ： 7 were sprayed on Q235 steel by plasma spray method to prepare coating with amorphous phases. The phase composition of the mixed alloy powders and prepared coating were characterized by X-ray diffraction （ XRD ）. The morphology and the composition cf the coating were analyzed by scanning eleetron microscopy （SEM） nnd energy dispersive apectroscopy （ EDS ）. In addition, the thermal stability ef the coating with amorphous phases was characterized by differential thermal analyzer （ DTA ）. Tile results showed that, usirtg mixed alloy powders with a molar ratio of Fe： P： C of 80：13：7, the coating containing certain amount of amorphous alloys was suceessathlly prepared through atmospheric plasma spray technique. In the coating, the main phases were determined to be Fe, FeP aad Fe2P. The crystallization of the coating started from about 461°. Tile coating was mechanically adhered to the substrate.

Spectroscopic diagnosis of plasma in atmospheric pressure negative pulsed gas-liquid discharge with nozzle-cylinder electrode

The plasma characteristics of a gas-liquid phase discharge reactor were investigated by optical and electrical methods.The nozzle-cylinder electrode in the discharge reactor was supplied witha negative nanosecond pulsed generator.The optical emission spectrum diagnosis revealed that OH（A2∑＋ → X2Π,306–309 nm）,N32（CΠ→B3Πg,337 nm）,O（3p5p→3s-5s-0,777.2 nm）and O（3p3p→3s3s0,844.6 nm）were produced in the discharge plasma channels.The electron temperature（Te）was calculated from the emission relative intensity ratio between the atomic O 777.2 nm and 844.6 nm,and it increased with the applied voltage and the pulsed frequency and fell within the range of 0.5–0.8 e V.The gas temperature（Tg）that was measured by Lifbase was in a range from 400 K to 600 K.

Branch Quality Control of Gas-Liquid Two-Phase Flow Using a Novel T-Junction Type Distributor

In order to eliminate mal-distribution and ensure the side arm to produce desirable gas quality a special distributor is proposed. The experimental distributor mainly consists of a straight through section,a gas extraction line,a liquid extraction line and a side arm branch. A gas orifice and a liquid orifice are mounted at the gas and liquid extraction line respectively to control the outlet gas quality. The diameter of the liquid orifice was set to 2. 50 mm and three gas orifices with different size( dG= 2. 65,5. 00,10. 00 mm) were tested. The experiments were carried out at an air-water two-phase flow loop. The gas superficial velocity ranged from 6. 0 to 20. 0 m /s and the liquid superficial velocity was in the range of 0. 02- 0. 18 m /s. Flow patterns such as wave flow,slug flow and annular flow were observed. The gas quality of the side arm branch was found mainly determined by the flow area ratio of the gas orifice to the liquid orifice and independent of gas and liquid superficial velocity,flow patterns and extraction flux.

Characterization of a 3-Phase a.c. Free Burning Arc Plasma

A 3-phase a.c. arc plasma reactor with large volume plasma has been developed for the synthesis of new carbon nano-structures. One of the main characteristics of the plasma system is related to the absence of a fixed neutral point. This gives rise to a rich and complex phenomenology related to instabilities and arc motion since the arcs are ＂burning＂ freely in the gas flow between the three electrodes. This paper is dedicated to the analysis of the behavior of such a system under typical conditions using argon and nitrogen as plasma gases. A classification of are configuration, arc commutating, arc interaction, arc motion and arc instabilities are discussed based on ultra high-speed cine camera analysis. A simple model describing the time evolution of the system is also presented and compared with the experimental measurements. The results show that an adequate control could allow the improvement of the overall system.

THE FEASIBILITIES OF USING THE STATISTICAL,FRACTAL AND SINGULAR PROCESSING OF HOMINAL BLOOD PLASMA PHASE IMAGES DURING THE DIAGNOSTICS AND DIFFERENTIATION OF MAMMARY GLAND PATHOLOGICAL STATES

Performed in this work are complex statistical,fractal and singular analyses of phase properties inherent to birefringence networks of protein crystals consisting of optically-thin layers prepared from blood plasma.Within the framework of a statistical approach,the authors have investigated values and ranges for changes of statistical moments of thefirst to the fourth orders that characterize coordinate distributions for phase shifts between orthogonal components of amplitudes inherent to laser radiation transformed by blood plasma with various pathologies.In the framework of the fractal approach,determined are the dimensions of self-similar coordinate phase distributions as well as features of transformation of logarithmic dependences for power spectra of these distributions for various types of hominal mammary gland pathologies.

Research on phase shift characteristics of electromagnetic wave in plasma

The phase shift characteristics reflect the state change of electromagnetic wave in plasma sheath and can be used to reveal deeply the action mechanism between electromagnetic wave and plasma sheath.In this paper,the phase shift characteristics of electromagnetic wave propagation in plasma were investigated.Firstly,the impact factors of phase shift including electron density,collision frequency and incident frequency were discussed.Then,the plasma with different electron density distribution profiles were employed to investigate the influence on the phase shift characteristics.In a real case,the plasma sheath around the hypersonic vehicle will affect and even break down the communication.Based on the hypersonic vehicle model,we studied the electromagnetic wave phase shift under different flight altitude,speed,and attack angle.The results indicate that the phase shift is inversely proportional to the flight altitude and positively proportional to the flight speed and attack angle.Our work provides a theoretical guidance for the further research of phase shift characteristics and parameters inversion in plasma.