Synthesizing active and durable cubic ceria catalysts(<6 nm)for fast dehydrogenation of bio-polyols to carboxylic acids coproducing green H_(2)

Dehydrogenation is considered as one of the most important industrial applications for renewable energy.Cubic ceria-based catalysts are known to display promising dehydrogenation performances in this area.Large particle size(>20 nm)and less surface defects,however,hinder further application of ceria materials.Herein,an alternative strategy involving lactic acid(LA)assisted hydrothermal method was developed to synthesize active,selective and durable cubic ceria of<6 nm for dehydrogenation reactions.Detailed studies of growth mechanism revealed that,the carboxyl and hydroxyl groups in LA molecule synergistically manipulate the morphological evolution of ceria precursors.Carboxyl groups determine the cubic shape and particle size,while hydroxyl groups promote compositional transformation of ceria precursors into CeO_(2) phases.Moreover,enhanced oxygen vacancies(Vo)on the surface of CeO_(2) were obtained owing to continuous removal of O species under reductive atmosphere.Cubic CeO_(2) catalysts synthesized by the LA-assisted method,immobilized with bimetallic PtCo clusters,exhibit a record high activity(TOF:29,241 h^(-1))and Vo-dependent synergism for dehydrogenation of bio-derived polyols at 200℃.We also found that quenching Vo defects at air atmosphere causes activity loss of PtCo/CeO_(2) catalysts.To regenerate Vo defects,a simple strategy was developed by irradiating deactivated catalysts using hernia lamp.The outcome of this work will provide new insights into manufacturing durable catalyst materials for aqueous phase dehydrogenation applications.

Promotional effect of H_3PO_4 on ceria catalyst for selective catalytic reduction of NO by NH_3

A series of H3PO4-modified CeO2 samples were prepared by impregnation of CeO2 with H3PO4solution,and evaluated for the selective catalytic reduction of NOx by NH3.The samples were characterized by X-ray diffraction,N2 adsorption-desorption,infrared spectroscopy,Raman spectroscopy,X-ray photoelectron spectroscopy,temperature-programmed desorption of NH3,and temperature-programmed reduction of H2.The results showed that more than 80%NO conversion was achieved in the temperature range 250-550℃ over the H3PO4-CeO2 catalyst.The enhanced catalytic performance could be ascribed to the increase in acidic strength,especially Bronsted acidity,and reduction in redox properties of the CeO2 after H3PO4 modification.

Enhanced catalytic activities and selectivities in preferential oxidation of CO over ceria-promoted Au/Al_2O_3 catalysts

The preferential oxidation of CO （CO‐PROX） is a hot topic because of its importance in pro‐ton‐exchange membrane fuel cells （PEMFCs）. Au catalysts are highly active in CO oxidation. Howev‐er, their activities still need to be improved at the PEMFC operating temperatures of 80–120 ＆#176;C. In the present study, Au nanoparticles of average size 2.6 nm supported on ceria‐modified Al2O3 were synthesized and characterized using powder X‐ray diffraction, nitrogen physisorption, transmission electron and scanning transmission electron microscopies, temperature‐programmed hydrogen reduction （H2‐TPR）, Raman spectroscopy, and in situ diffuse‐reflectance infrared Fourier‐transform spectroscopy. Highly dispersed Au nanoparticles and strong structures formed by Au–support in‐teractions were the main active species on the ceria surface. The Raman and H2‐TPR results show that the improved catalytic performance of the Au catalysts can be attributed to enhanced strong metal–support interactions and the reducibility caused by ceria doping. The formation of oxygen vacancies on the catalysts increased their activities in CO‐PROX. The synthesized Au catalysts gave excellent catalytic performances with high CO conversions （＆gt;97%） and CO2 selectivities （＆gt;50%） in the temperature range 80–150 ＆#176;C.

Preparation and CO conversion activity of ceria nanotubes by carbon nanotubes templating method

Ceria nanotubes with high CO conversion activity by means of carbon nanotubes as removable templates in the simple liquid phase process were fabricated under moderate conditions. The pristine CNTs were first pretreated by refluxing in a 30% nitric acid solution at 140 ℃ for 24 h, then dispersed in an ethanolic Ce（NO3）3.6H2O solution with ultrasonic radiation at room temperature for 1 h. Under vigorous stirring, NaOH solution was added drop by drop into the above ethanolic solution until the pH value was 10. The product was collected and repeatedly washed with ethanol and on drying at 60 ℃, the CeO2/CNT composites were obtained. Then, the as-prepared composites were heated at 450 ℃ in an air atmosphere for 30 min to remove CNTs. The ceria nanotubes were characterized by X-Ray Diffraction （XRD）, Transmission Electron Microscopy （TEM）, and X-Ray Photoelectron Spectrum （XPS）. The results showed that the ceria nanotubes were polycrystalline face-centered cubic phase and were composed of lots of dense cefia nanoparficles. The diameter of cefia nanotubes was about 40-50 nm. Catalytic activity of the product for CO oxidation was carded out at the region of 30-300 ℃ in a U-shaped quartz reactor with feeding about 0.15 g of the catalyst, which was loaded on Al2O3 carder. The inlet gas composition was 1.0% CO and 28% O2 with N2 as balance, and the rate of flow was kept at 40 ml/min. The catalytic products were analyzed by gas chromatography. The as-repared CeO2 nanotubes showed higher CO oxidation activity, which indicated that the morphology of ceria products affected the catalytic performance. The ceria nanotubes supported on Al2O3 demonstrated that conversion temperature for CO oxidation to CO2 was lower than that for bulk catalysts.

Effect of samarium doped ceria nanoparticles impregnation on the performance of anode supported SOFC with(Pr_(0.7)Ca_(0.3))_(0.9)MnO_(3-δ) cathode

Solid oxide fuel cell(SOFC) electrodes,after a high temperature sintering,may be impregnated to deposit nanoparticles within their pores to enhance the catalytic function.Samarium doped CeO2(SDC) nanoparticles were infiltrated into(Pr0.7Ca0.3)0.9MnO3-δ(PCM) cathode of anode supported SOFC cells.The cell with 2.6 mg/cm2 SDC impregnated in cathode showed the maximum power density of 580 mW/cm2 compared with 310 mW/cm2 of the cell without impregnation at 850 °C.The cells were also characterized with the impeda...

Ceria modified three-dimensionally ordered macro-porous Pt/TiO_2 catalysts for water-gas shift reaction

Three-dimensionally ordered macro-porous （3DOM） TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were prepared with template and impregnation methods, and the resultant samples were characterized by scanning electron microscopy（SEM）, X-ray diffractometer（XRD）, high-resolution transmission electron microscopy（HRTEM） and temperature programmed reducfion（TPR） techniques. The catalytic performances over the platinum-based catalysts were investigated for water-gas shift （WGS） reaction in a wide temperature range （180-360 ℃）. The results showed that 3DOM Pt/TiO2 catalyst exhibited obviously better catalytic performance than the corresponding non macro-porous catalyst, owing to the macro-porous structure favoring mass transfer. Addition of celia into 3DOM Pt/TiO2 led to improvement of catalytic activity. TPR and HRTEM results showed that the interaction existed between ceria and titanium oxide and addition of ceria promoted the reducibility of platinum oxide and TiO2 on the interface of platinum and TiO2 particles, which contributed to high activity of the celia modified catalysts. The results indicated that ceria-modified 3DOM Pt/TiO2 was a promising candidate of fuel cell oriented WGS catalyst.

Preparation of Fine Spherical Particle Sized Ceria by Precipitation Method with Ammonium Bicarbonate

Fine spherical particle sized ceria (CeO_2) was prepared by homogeneous precipitation method with ammonium bicarbonate as precipitant. The prepared CeO_2 has the primary particle size of 10～50 nm when calcined between 400～700 ℃ analyzed by XRD and the aggregated particle size is about 300 nm measured by LASER particle sizer. SEM, TG-DTA and Zeta-potential analyzer were employed individually to study the morphology and the formation of CeO_2 product. It was found that excess NH_4NO_3 can serve as an sphericallization agent to prepare spherical CeO_2 powder by precipitation method.

Influence of Nanometric Ceria Coating on Oxidation Behavior of Chromium at 900 ℃

Isothermal and cyclic oxidation behaviors of chromium samples with and without nanometric CeO2 coating were studied at 900℃ in air. Scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and high-resolution electron microscopy （HREM） were used to examine the morphology and microstructure of the oxide film. It was found that ceria coating greatly improved the oxidation resistance of Cr both in isothermal and cyclic oxidizing experiments. Acoustic emission （AE） technique was used in situ to monitor the cracking and spalling of oxide film, and AE signals were analyzed in time-domain and number-domain according to related oxide fracture model. Laser Raman spectrometer was also used to study the stress of oxide film formed on Cr with and without ceria. The improvement in oxidation resistance of chromium is believed mainly due to that ceria greatly reduced the growth speed and grain size of Cr2O3. This fine grained Cr2O3 oxide film might have better high temperature plasticity and could relieve parts of the compressive stress by means of creeping and maintained ridge character and relatively lower level of internal stress. Meanwhile, ceria application reduced the size and number of interfacial defects, remarkably enhanced the adhesive property of Cr2O3 oxide scale formed on Cr substrate.

Research on Calcium Doped Ceria Used in Intermediate-Temperature SOFCs Anodes

As a mixed ion-electronic conductor, doped ceria, especially rare earth doped ceria, were used as anodes or components of anodes in SOFCs. In this work, calcium doped ceria （CCO） was synthesized to be used in intermediate-temperature SOFCs （IT-SOFCs） anodes in order to reduce the cost of anode-supported SOFCs. Electrical conductivity of 20% calcium doped ceria （20CCO） reached 0.209 S·cm^-1 in hydrogen at 850 ℃, and 0.041 S·cm^-1 in air at 800℃, which is about 0.04 S·cm^-1 lower than that of conventional samaria-doped ceria （0.079 S·cm^-1）. Electrochemical performance of Ni-20CCO cermet as anode was investigated using a fuel cell with 35μm-thick SDC electrolyte and Sm0.5Sr0.5 Co-SDC cathode. Maximum power density was 623 mW·cm^-2 under humidified （3% H2O） hydrogen at 650 ℃, inferring high catalytic activity of the Ni-20CCO anode.

Redox behavior of gold supported on ceria and ceria-zirconia based catalysts

A series of gold-based catalysts were prepared by deposition precipitation or incipient wetness impregnation on CexZ1-xO2 solid solutions （0.28≤x≤1.00）. The morphological and structural characterization of these catalysts were carried out with X-ray diffraction, trans- mission electron microscopy （TEM） analysis and physical adsorption technique, and their redox properties were studied by temperature programmed reduction using both H2 and CO as probe molecules. Two cycles of oxidation/reduction were carried out in order to evaluate the effects of redox aging and gold sintering on the oxygen exchange capability. As observed with other noble metals, gold enhanced and promoted the ceria reduction at lower temperatures. Reduction by CO was shown to be dependent on the fine dispersion of gold and to be nega- tively affected by the ageing process more than reduction with hydrogen. This might have implications in reactions like water gas shift and CO-PROX which involve CO as a main reactant.

Ceria-modified hierarchical Hβ zeolite as a robust solid acid catalyst for alkenylation of p-xylene with phenylacetylene

A ceria‐modified hierarchical Hβzeolite was prepared by a desilication‐dealumination procedure followed by ceria modification.The catalytic performance of the ceria‐modified and unmodified hierarchical Hβzeolite catalysts for alkenylation of p‐xylene with phenylacetylene was investigated.Various characterization techniques,including X‐ray diffraction,X‐ray fluorescence,nitrogen adsorption‐desorption,and NH3temperature‐programmed desorption,were used to examine the structure‐performance relationships.Our results show that the optimized ceria‐modified hierarchical Hβzeolite catalyst demonstrated higher catalytic activity,selectivity,and stability for alkenylation of p‐xylene with phenylacetylene than those of pristine Hβzeolite.This performance was attributed to more acidic sites and improved accessibility to active sites through larger pores,together with a higher mesoporous surface area and volume resulting from the hierarchical pore architecture and ceria modification.Thus,our5wt%CeO2‐Hβ‐B0.2A0.2catalyst shows great potential for producing alkenyl aromatics through solid acid catalyzed alkenylation.?2018,Dalian Institute of Chemical Physics,Chinese Academy of Sciences.Published by Elsevier B.V.All rights reserved

Solar chemical looping reforming of methane combined with isothermal H2O/CO2 splitting using ceria oxygen carrier for syngas production

The chemical looping reforming of methane through the nonstoichiometric ceria redox cycle(CeO2/CeO2-δ) has been experimentally investigated in a directly irradiated solar reactor to convert both solar energy and methane to syngas in the temperature range 900–1050 °C. Experiments were carried out with different ceria shapes via two-step redox cycling composed of endothermic partial reduction of ceria with methane and complete exothermic re-oxidation of reduced ceria with H2 O/CO2 at the same operating temperature, thereby demonstrating the capability to operate the cycle isothermally. A parametric study considering different ceria macrostructure variants(ceria packed powder, ceria packed powder mixed with inert Al2 O3 particles, and ceria reticulated porous foam) and operating parameters(methane flow-rate, reduction temperature, or sintering temperature) was conducted in order to unravel their impact on the bed-averaged oxygen non-stoichiometry(δ), syngas yield, methane conversion, and solar reactor performance. The ceria cycling stability was also experimentally investigated to demonstrate repeatable syngas production by alternating the flow between CH4 and H2 O(or CO2). A decrease in sintering temperature of the ceria foam was beneficial for increasing syngas selectivity, methane conversion,and reactor performance. Increasing both CH4 concentration and reduction temperature enhanced δ with the maximum value up to 0.41 but concomitantly favored CH4 cracking reaction. The ceria reticulated porous foam showed better performance in terms of effective heat transfer, due to volumetric absorption of concentrated solar radiation and uniform heating with lower solar power consumption, thereby promoting the solar-to-fuel energy conversion efficiency that reached up to 5.60%. The energy upgrade factor achieved during cycle was up to 1.19. Stable patterns in the δ and syngas yield for consecutive cycles with the ceria foam validated material performance stability.

Determining number of sites on ceria stabilizing single atoms via metal nanoparticle redispersion

Single atom catalysts have recently attracted interest due to their maximization of the utilization of expensive noble metals as well as their unique catalytic properties. Based on its surface atomic properties, CeO2 is one of the most common supports for stabilizing single metal atoms. Many single atom catalysts are limited in their metal contents by the formation of metal nanoparticles once the catalyst support capacity for single atoms has been exceeded. Currently, there are no direct measurements to determine the capacity of a support to stabilize single atoms. In this work we develop a nanoparticle-based technique that allows for quantification of that capacity by redispersing Ru nanoparticles into single atoms and taking advantage of the different catalytic properties of Ru single atoms and nanoparticles in the CO2 hydrogenation reaction. This method avoids complications in metal loading caused by counterions in incipient wetness impregnation and can eventually be applied to a variety of different metals. Results using this technique follow trends in oxygen vacancy concentration and surface oxygen content and show promise as a new method for quantifying support single atom stabilization capacity.

Effect of ceria on copper／γ－alumina catalysts for carbon monoxide and n－hexane oxidation

In this paper, oxidation activity of CuO/γ-A12O3 catalysts and the addition of CeO2 on CuO/γ-A12O3 catalysts for oxidation reaction of n-hexane (n-C6H14 ) and carbon monoxide (CO ) were studied by means of the flow method techniques, XRD and TPD-MS. Experimental results indicated that (1) the addition of CeO2 improving disperse degree of CuO on CuO/γ-Al2O3 catalysts which caused a large increase in activity; (2) the addition of CeO2 may increase oxygen supplying ability and oxygen recovery ability of catalyst surface.

Study on Agglomeration and Densification Behaviors of Gadolinium-Doped Ceria Ceramics

By synthesizing reactive powders via a self-sustaining combustion synthesis, the glycine-nitrate process, the gadolinium-doped celia （GDC） with the chemical formula Ce0.8Gd0.2O1.9 was prepared. The resultant powders were dispersed with the terpineol as the dispersant through different methods such as ball milling and high-shear dispersing. Coagulation factor （CF） was used to mark the degree of agglomeration on the nano-scale GDC in this work. The effect of agglomeration on the densification behavior at different sintering temperatures was investigated. The studies indicated that agglomeration retarded the densification at the sintering stage. The powders with better dispersion exhibited a higher sintered density at the same temperature. After effective dispersion treatment, GDC could be fully densified at the sintering temperature of 1300 ℃. The densification temperature was significantly lower than those reported previously. The high sintering kinetics of the ceramics was obtained based on the agglomeration control.

Novel Salt-Assisted Combustion Synthesis of High Surface Area Ceria Nanopowders by An Ethylene Glycol-Nitrate Combustion Process

A novel salt-assisted combustion process with ethylene glycol as a fuel and nitrate as an oxidant to synthesize high surface area celia nanopowders was reported. The effects of various tunable conditions, such as fuel-to-oxidant ratio, type of salts, and amount of added salts, on the characteristics of the as-prepared powders were investigated by X-ray diffraction, transmission electron microscopy and BET surface area measurement. A mechanism scheme was proposed to illustrate the possible formation processes of well-dispersed ceria nanoparticles in the salt-assisted combustion synthesis. It was verified that the simple introduction of leachable inert inorganic salts as an excellent agglomeration inhibitor into the redox mixture precursor leads to the formation of well-dispersed ceria particles with particle size in the range of 4 ～6 nm and a drastic increase in the surface area. The presence of KCl results in an over ten-fold increment in specific surface area from 14.10 m^2·g^-1 for the produced ceria powders via the conventional combustion synthesis process to 156.74 m^2·g^-1 for the product by the salt-assisted combustion synthesis process at the same molar ratio of ethylene glycol-nitrate.

Effect of Addition of Base on Ceria and Reactivity of CuO/CeO_2 Catalysts for Low-Temperature CO Oxidation

In this work, we have reported the influence of the addition of base （KOH） on the physicochemical property of ceria synthesized by alcohothermal process, and the alcohothermal mechanism was also put forward. Furthermore, the prepared CeO2 was used as the support to prepare CuO/CeO2 catalysts via the wet impregnation method. The samples were characterized by N2 adsorption-desorption, X-ray powder diffraction （XRD）, high resolution transmission electron microscopy （HRTEM）, and temperatureprogrammed reduction by H2 （H2-TPR）. The catalytic properties of the CuO/CeO2 catalysts for lowtemperature CO oxidation were studied using a microreactor-GC system. The crystal size of CeO2-A was much smaller than that of CeO2-B, and the corresponding copper oxide catalysts exhibited higher catalytic activity than that of the CeO2-B-supported catalysts under the same reaction conditions. The alcohothermal mechanism indicated that KOH plays a key role in determining the physicochemical and catalytic properties of ceria-based materials.

Catalytic properties of Ni/ceria-yttria electrode materials for partial oxidation of methane

The catalytic properties of electrode materials Ni/Ce1-xYxO2-δ （x = 0.05, 0.10, 0.15 and 0.20） were investigated for partial oxidation of methane （POM）. The CeO2-Y2O3 solid solutions were prepared by co-precipitaion method. The Ni-based catalysts supported on the solid solutions were obtained using the impregnation method. Structural, surface and redox characteristics of the prepared catalysts were system- atically examined by means of X-ray diffraction （XRD）, N2 adsorption-desorption （Brunauer-Emmet-Teller BET method）, H2 temperature- programmed reduction （H2-TPR） and X-ray photoelectron spectroscopy （XPS） methods. The results indicated that yttria doped in the ceria system, forming a good solid solution, readily induced more defects and oxygen vacancies that favored the improvement of catalytic activity and coking resistance. In the temperature range of 600-850 ℃, Ni/Ce0.90Y0.10O1.950 catalyst exhibited the best catalytic activity among the four tested catalysts, with the CH4 conversion, CO selectivity and H2 selectivity of 78.8%, 90.6% and 89.8%, respectively, at 850 ℃. And the H2/CO molar ratio in products of Ni/Ce0.90Y0.10O1.950 catalyst was closer to the theoretical value of 2.0. The excellent coking resistant behaviors for all catalysts were clearly manifested by thermal analysis.

Support effect of the supported ceria-based catalysts during NH_3-SCR reaction

To investigate how the physicochemical properties and NH3‐selective catalytic reduction(NH3‐SCR)performance of supported ceria‐based catalysts are influenced as a function of support type,a series of CeO2/SiO2,CeO2/γ‐Al2O3,CeO2/ZrO2,and CeO2/TiO2catalysts were prepared.The physicochemical properties were probed by means of X‐ray diffraction,Raman spectroscopy,Brunauer‐Emmett‐Teller surface area measurements,X‐ray photoelectron spectroscopy,H2‐temperature programmed reduction,and NH3‐temperature programmed desorption.Furthermore,the supported ceria‐based catalysts'catalytic performance and H2O+SO2tolerance were evaluated by the NH3‐SCR model reaction.The results indicate that out of the supported ceria‐based catalysts studied,the CeO2/γ‐Al2O3catalyst exhibits the highest catalytic activity as a result of having a high relative Ce3+/Ce4+ratio,optimum reduction behavior,and the largest total acid site concentration.Finally,the CeO2/γ‐Al2O3catalyst also presents excellent H2O+SO2tolerance during the NH3‐SCR process.

Low Temperature Preparation of Ceria Solid Solutions Doubly Doped with Rare-Earth and Alkali-Earth and Their Properties as Solid Oxide Fuel Cells

A series of solid electrolytes, (Ce 0.8 Ln 0.2 ) 1- x M x O 2-δ (Ln= La, Nd, Sm, Gd, M:Alkali earth), were prepared by amorphous citrate gel method. XRD patterns indicate that a pure fluorite phase is formed at 800 ℃. The electrical conductivity and the AC impedance spectra were measured. XPS spectra show that the oxygen vacancies increase owing to the MO doping, which results in the increase of the oxygen ionic transport number and conductivity. The performance of ceria based solid electrolyte is improved. The effects of rare earth and alkali earth ions on the electricity were discussed. The open circuit voltages and maximum power density of planar solid oxide fuel cell using (Ce 0.8 Sm 0.2 ) 1-0.05 Ca 0.05 O 2- δ as electrolyte are 0.86 V and 33 mW·cm -2 , respectively.