Enhanced ionic conductivity in a novel composite electrolyte based on Gd-doped SnO_(2) nanotubes for ultra-long-life all-solid-state lithium metal batteries

All-solid-state electrolytes are exceedingly attractive because of the outstanding inherent safety and energy density compared to liquid electrolytes.Whereas,it is still formidable to simultaneously design solid electrolytes with favorable electrode/electrolyte interface compatibility and high ionic conductivity in a simple and scalable manner.Hence,the oxygen-vacancy-rich Gd-doped SnO_(2) nanotubes(GDS NTs)are innovatively prepared and applied to the electrolyte of all-solid-state lithium metal batteries for the first time.The addition of GDS NTs can validly construct long-range co ntinuous ion transport networks in the poly(ethylene oxide)(PEO)-based system and greatly improve the mechanical properties of the electrolyte.Compared to the PEO-based electrolyte,the composite electrolyte displays a higher lithium ion conductivity of 2.41×10^(-4) S cm^(-1) at 30℃,a higher lithium ion transference number up to 0.62 and a wider electrochemical window of 5 V at 50℃.In addition,the composite electrolyte manifests outstanding compatibility with high-voltage LiNi_(0.8)Mn_(0.1)Co_(0.1)O_(2)(NMC811)cathode,LiFePO4 cathode and lithium metal anode.The assembled Li/Li symmetric battery exhibits stable Li plating/stripping cycling performance,which can cycle steadily for 1500 h at a capacity of 0.3 mA h cm^(-2).And Li/LiFePO4 battery still maintains a high capacity of 131.54 mA h g^(-1) at 0.5C after 800 cycles,which has a superior capacity retention rate of 93.2%.The obtained novel composite electrolyte has promising application prospects in the field of all-solid-state lithium metal cells.

Synthesis and characterization of Gd-doped PbMoO_(4) nanoparticles used for UV-light-driven photocatalysis

Gd-doped PbMoO_(4) nanoparticles were prepared by a refluxing method at 80℃ for 2 h.Effect of molar content of Gd dopant on phase,morphology and optical properties was studied.The as-prepared Gddoped PbMoO_(4) samples can be indexed to pure tetragonal PbMoO_(4) phase.The particles size of PbMoO_(4) is decreased with increasing in the molar content of Gd dopant from 15.20±3.04 nm for pure PbMoO_(4) to 8.72±1.53 nm for 5 mol% Gd-doped PbMoO_(4).The absorption of 5 mol% Gd-doped PbMoO_(4) nanoparticles shows red-shift caused by lattice distortion of PbMoO_(4).The photocatalytic performance of 5 mol% Gddoped PbMoO_(4) nanoparticles shows the highest degradation of rhodamine B(RhB) of 97.92% under UV radiation and 67.65% under visible radiation because Gd^(3+) dopant as an electron acceptor plays the role in enhancing the separation of electron-hole pair.

Optimized CeO_(2) Nanowires with Rich Surface Oxygen Vacancies Enable Fast Li-Ion Conduction in Composite Polymer Electrolytes

Low-cost and flexible solid polymer electrolytes are promising in all-solid-state Li-metal batteries with high energy density and safety.However,both the low room-temperature ionic conductivities and the small Li^(+)transference number of these electrolytes significantly increase the internal resistance and overpotential of the battery.Here,we introduce Gd-doped CeO_(2) nanowires with large surface area and rich surface oxygen vacancies to the polymer electrolyte to increase the interaction between Gd-doped CeO_(2) nanowires and polymer electrolytes,which promotes the Li-salt dissociation and increases the concentration of mobile Li ions in the composite polymer electrolytes.The optimized composite polymer electrolyte has a high Li-ion conductivity of 5×10^(-4)4 S cm^(-1) at 30℃ and a large Li+transference number of 0.47.Moreover,the composite polymer electrolytes have excellent compatibility with the metallic lithium anode and high-voltage LiNi_(0.8)Mn _(0.1)Co_(0.1)O_(2)(NMC)cathode,providing the stable cycling of all-solid-state batteries at high current densities.

The Effect of Fabrication Conditions for GDC Buffer Layer on Electrochemical Performance of Solid Oxide Fuel Cells

A Gd-doped ceria（GDC） buffer layer is required between a conventional yttria-stabilized zirconia（YSZ） electrolyte and a La-Sr-Co-Fe-O3（LSCF） cathode to prevent their chemical reaction. In this study,the effect of varying the conditions for fabricating the GDC buffer layer, such as sintering temperature and amount of sintering aid, on the solid oxide fuel cell（SOFC） performance was investigated. A finer GDC powder（i.e., ultra-high surface area）, a higher sintering temperature（1290℃）, and a larger amount of sintering aid（12%） resulted in improved densification of the buffer layer; however, the electrochemical performance of an anode-supported cell containing this GDC buffer layer was poor. These conflicting results are attributed to the formation of（Zr, Ce）O2 and/or excess cobalt grain boundaries（GBs） at higher sintering temperatures with a large amount of sintering aid（i.e., cobalt oxide）. A cell comprising of a cobalt-free GDC buffer layer, which was fabricated using a low-temperature process, had lower cell resistance and higher stability. The results indicate that electrochemical performance and stability of SOFCs strongly depend on fabrication conditions for the GDC buffer layer.

Microstructure,magnetism and nanomechanical properties of Ni50Mn25Ga20Gd5 magnetic shape memory alloy before and after heat treatment

Polycrystalline Ni50Mn25Ga20Gd5(at%)magnetic shape memory alloy was investigated in the asprepared state and after annealing at 1430 K for 3 h.Microstructural analysis reveals dual-phase nature of the material with substantial distinction between Gd-rich and Gd-poor phases.Magnetic measurements performed in wide range of temperatures confirm reversible martensitic transformation in the annealed sample undergoing close to the room temperature.When it comes to the magnetic transition,the Curie temperature of the investigated alloy remains approximately unchanged at 370 K.Topography investigations conducted on the atomic force microscope in contact mode allow to measure 8 mm difference between minimum and maximum point of the martensite profile.The results from a series of nanoindentation tests show that hardness of the Gd-rich phase is 23%-35%higher than hardness of the Gd-poor phase,depending on the annealing state.