Torque effect on vibration behavior of high-speed train gearbox under internal and external excitations

The high-speed train transmission system,experiencing both the internal excitation originating from gear meshing and the external excitation originating from the wheel-rail interaction,exhibits complex dynamic behavior in the actual service environment.This paper focuses on the gearbox in the high-speed train to carry out the bench test,in which various operat-ing conditions(torques and rotation speeds)were set up and the excitation condition covering both internal and external was created.Acceleration responses on multiple positions of the gearbox were acquired in the test and the vibration behavior of the gearbox was studied.Meanwhile,a stochastic excitation modal test was also carried out on the test bench under different torques,and the modal parameter of the gearbox was identified.Finally,the sweep frequency response of the gearbox under gear meshing excitation was analyzed through dynamic modeling.The results showed that the torque has an attenuating effect on the amplitude of gear meshing frequency on the gearbox,and the effect of external excitation on the gearbox vibration cannot be ignored,especially under the rated operating condition.It was also found that the torque affects the modal param-eter of the gearbox significantly.The torque has a great effect on both the gear meshing stiffness and the bearing stiffness in the transmission system,which is the inherent reason for the changed modal characteristics observed in the modal test and affects the vibration behavior of the gearbox consequently.

Advancing high-speed train gearbox durability:enhanced bearing load and contact stress through transition from helical to herringbone gears

High-speed trains typically utilize helical gear transmissions,which significantly impact the bearing load capacity and fatigue service performance of the gearbox bearings.This paper focuses on the gearbox bearings,establishing dynamic models for both helical gear and herringbone gear transmissions in high-speed trains.The modeling particularly emphasizes the precision of the bearings at the gearbox's pinion and gear wheels.Using this model,a comparative analysis is conducted on the bearing loads and contact stresses of the gearbox bearings under uniform-speed operation between the two gear transmissions.The findings reveal that the helical gear transmission generates axial forces leading to severe load imbalance on the bearings at both sides of the large gear,and this imbalance intensifies with the increase in train speed.Consequently,this results in a significant increase in contact stress on the bearings on one side.The adoption of herringbone gear transmission effectively suppresses axial forces,resolving the load imbalance issue and substantially reducing the contact stress on the originally biased side of the bearings.The study demonstrates that employing herringbone gear transmission can significantly enhance the service performance of high-speed train gearbox bearings,thereby extending their service life.

Dynamics and Fault Diagnosis of Railway Vehicle Gearboxes:A Review

The railway vehicle gearbox is an important part of the railway vehicle traction transmission system which ensures the smooth running of railway vehicles.However,as the running speed of railway vehicles continues to increase,the railway vehicle gearbox is exposed to a more demanding operating environment.Under both internal and external excitations,the gearbox is prone to faults such as fatigue cracks,and broken teeth.It is crucial to detect these faults before they result in severe failures and accidents.Therefore,understanding the dynamics and fault diagnosis of railway vehicle gearbox is needed.At present,there is a lack of systematic review of railway vehicle gearbox dynamics and fault diagnosis.So,this paper systematically summarizes the research progress on railway vehicle gearbox dynamics and fault diagnosis.To this end,this paper first summarizes the latest research progress on the dynamics of railway vehicle gearboxes.The dynamics and vibration characteristics of the gearbox are summarized under internal and external excitations,as well as faulty conditions.Then,the stateof-the-art signal processing and artificial intelligence methods for fault diagnosis of railway vehicle gearboxes are reviewed.In the end,future research prospects are given.

Crack Fault Classification for Planetary Gearbox Based on Feature Selection Technique and K-means Clustering Method

During the condition monitoring of a planetary gearbox, features are extracted from raw data for a fault diagnosis.However, different features have different sensitivity for identifying different fault types, and thus, the selection of a sensitive feature subset from an entire feature set and retaining as much of the class discriminatory information as possible has a directly effect on the accuracy of the classification results. In this paper, an improved hybrid feature selection technique(IHFST) that combines a distance evaluation technique(DET), Pearson’s correlation analysis, and an ad hoc technique is proposed. In IHFST, a temporary feature subset without irrelevant features is first selected according to the distance evaluation criterion of DET, and the Pearson’s correlation analysis and ad hoc technique are then employed to find and remove redundant features in the temporary feature subset, respectively, and hence,a sensitive feature subset without irrelevant or redundant features is selected from the entire feature set. Further, the k-means clustering method is applied to classify the different kinds of health conditions. The effectiveness of the proposed method was validated through several experiments carried out on a planetary gearbox with incipient cracks seeded in the tooth root of the sun gear, planet gear, and ring gear. The results show that the proposed method can successfully distinguish the different health conditions of a planetary gearbox, and achieves a better classification performance than other methods. This study proposes a sensitive feature subset selection method that achieves an obvious improvement in terms of the accuracy of the fault classification.

Gearbox Fault Diagnosis using Adaptive Zero Phase Time-varying Filter Based on Multi-scale Chirplet Sparse Signal Decomposition

When used for separating multi-component non-stationary signals, the adaptive time-varying filter(ATF) based on multi-scale chirplet sparse signal decomposition(MCSSD) generates phase shift and signal distortion. To overcome this drawback, the zero phase filter is introduced to the mentioned filter, and a fault diagnosis method for speed-changing gearbox is proposed. Firstly, the gear meshing frequency of each gearbox is estimated by chirplet path pursuit. Then, according to the estimated gear meshing frequencies, an adaptive zero phase time-varying filter(AZPTF) is designed to filter the original signal. Finally, the basis for fault diagnosis is acquired by the envelope order analysis to the filtered signal. The signal consisting of two time-varying amplitude modulation and frequency modulation(AM-FM) signals is respectively analyzed by ATF and AZPTF based on MCSSD. The simulation results show the variances between the original signals and the filtered signals yielded by AZPTF based on MCSSD are 13.67 and 41.14, which are far less than variances (323.45 and 482.86) between the original signals and the filtered signals obtained by ATF based on MCSSD. The experiment results on the vibration signals of gearboxes indicate that the vibration signals of the two speed-changing gearboxes installed on one foundation bed can be separated by AZPTF effectively. Based on the demodulation information of the vibration signal of each gearbox, the fault diagnosis can be implemented. Both simulation and experiment examples prove that the proposed filter can extract a mono-component time-varying AM-FM signal from the multi-component time-varying AM-FM signal without distortion.

Application of particle swarm optimization blind source separation technology in fault diagnosis of gearbox

Blind source separation (BBS) technology was applied to vibration signal processing of gearbox for separating different fault vibration sources and enhancing fault information. An improved BSS algorithm based on particle swarm optimization (PSO) was proposed. It can change the traditional fault-enhancing thought based on de-noising. And it can also solve the practical difficult problem of fault location and low fault diagnosis rate in early stage. It was applied to the vibration signal of gearbox under three working states. The result proves that the BSS greatly enhances fault information and supplies technological method for diagnosis of weak fault.

Gearbox Deterioration Detection under Steady State,Variable Load, and Variable Speed Conditions

Multiple dominant gear meshing frequencies are present in the vibration signals collected from gearboxes and the conventional spiky features that represent initial gear fault conditions are usually difficult to detect. In order to solve this problem, we propose a new gearbox deterioration detection technique based on autoregressive modeling and hypothesis testing in this paper. A stationary autoregressive model was built by using a normal vibration signal from each shaft. The established autoregressive model was then applied to process fault signals from each shaft of a two-stage gearbox. What this paper investigated is a combined technique which unites a time-varying autoregressive model and a two sample Kolmogorov-Smimov goodness-of-fit test, to detect the deterioration of gearing system with simultaneously variable shaft speed and variable load. The time-varying autoregressive model residuals representing both healthy and faulty gear conditions were compared with the original healthy time-synchronous average signals. Compared with the traditional kurtosis statistic, this technique for gearbox deterioration detection has shown significant advantages in highlighting the presence of incipient gear fault in all different speed shafts involved in the meshing motion under variable conditions.

GEARBOX FAULTDIAGNOSIS BASED ON EMPIRICAL MODE DECOMPOSITION

Time synchronous averaging of vibration data is a fundament technique forgearbox diagnosis. Currently, this technique relies on hardware tachometer to give phase synchronousinformation. Empirical mode decomposition (EMD) is introduced to replace time synchronous averagingof gearbox vibration signal. With it, any complicated dataset can be decomposed into a finite andoften small number of intrinsic mode functions (IMF). The key problem is how to assure thatvibration signals deduced by gear defects could be sifted out by EMD. The characteristic vibrationsignals of gear defects are proved IMFs, which makes it possible to utilize EMD for the diagnosis ofgearbox faults. The method is validated by data from recordings of the vibration of a single-stagespiral bevel gearbox with fatigue pitting. The results show EMD is powerful to extractcharacteristic information from noisy vibration signals.

Application of Instantaneous Rotational Speed to Detect Gearbox Faults Based on Double Encoders

Considerable studies have been carried out on fault diagnosis of gears, with most of them concentrated on conventional vibration analysis. However, besides the complexity of gear dynamics, the diagnosis results in terms of vibration signal are easily misjudged owing to the interference of sensor position or other components. In this paper, an alternative gearbox fault detection method based on the instantaneous rotational speed is proposed because of its advantages over vibration analysis. Depending on the timer/counter-based method for the pulse signal of the optical encoder, the varying rotational speed can be obtained e ectively. Owing to the coupling and meshing of gears in transmission, the excitations are the same for the instantaneous rotational speed of the input and output shafts. Thus, the di erential signal of instantaneous rotational speeds can be adopted to eliminate the e ect of the interference excitations and extract the associated feature of the localized fault e ectively. With the experiments on multistage gearbox test system, the di erential signal of instantaneous speeds is compared with other signals. It is proved that localized faults in the gearbox generate small angular speed fluctuations, which are measurable with an optical encoder. Using the di erential signal of instantaneous speeds, the fault characteristics are extracted in the spectrum where the deterministic frequency component and its harmonics corresponding to crack fault characteristics are displayed clearly.

Virtual sensing for gearbox condition monitoring based on kernel factor analysis

Vibration and oil debris analysis are widely used in gearbox condition monitoring as the typical indirect and direct sensing techniques. However, they have their own advantages and disadvantages. To better utilize the sensing information and overcome its shortcomings, this paper presents a virtual sensing technique based on artificial intelligence by fusing low-cost online vibration measurements to derive a gearbox condition indictor, and its performance is comparable to the costly offline oil debris measurements. Firstly, the representative features are extracted from the noisy vibration measurements to characterize the gearbox degradation conditions. However, the extracted features of high dimensionality present nonlinearity and uncertainty in the machinery degradation process. A new nonlinear feature selection and fusion method,named kernel factor analysis, is proposed to mitigate the aforementioned challenge. Then the virtual sensing model is constructed by incorporating the fused vibration features and offline oil debris measurements based on support vector regression. The developed virtual sensing technique is experimentally evaluated in spiral bevel gear wear tests,and the results show that the developed kernel factor analysis method outperforms the state-of-the-art featureselection techniques in terms of virtual sensing model accuracy.

Development of Optimal Maintenance Policies for Offshore Wind Turbine Gearboxes Based on the Non-homogeneous Continuous-Time Markov Process

Gearbox in offshore wind turbines is a component with the highest failure rates during operation. Analysis of gearbox repair policy that includes economic considerations is important for the effective operation of offshore wind farms. From their initial perfect working states, gearboxes degrade with time, which leads to decreased working efficiency. Thus, offshore wind turbine gearboxes can be considered to be multi-state systems with the various levels of productivity for different working states. To efficiently compute the time-dependent distribution of this multi-state system and analyze its reliability, application of the nonhomogeneous continuous-time Markov process(NHCTMP) is appropriate for this type of object. To determine the relationship between operation time and maintenance cost, many factors must be taken into account, including maintenance processes and vessel requirements. Finally, an optimal repair policy can be formulated based on this relationship.

Swarm-LSTM: Condition Monitoring of Gearbox Fault Diagnosis Based on Hybrid LSTM Deep Neural Network Optimized by Swarm Intelligence Algorithms

Nowadays,renewable energy has been emerging as the major source of energy and is driven by its aggressive expansion and falling costs.Most of the renewable energy sources involve turbines and their operation and maintenance are vital and a difficult task.Condition monitoring and fault diagnosis have seen remarkable and revolutionary up-gradation in approaches,practices and technology during the last decade.Turbines mostly do use a rotating type of machinery and analysis of those signals has been challenging to localize the defect.This paper proposes a new hybrid model wherein multiple swarm intelligence models have been evaluated to optimize the conventional Long Short-Term Memory(LSTM)model in classifying the faults from the vibration signals data acquired from the gearbox.This helps to analyze the performance and behavioral patterns of the system more effectively and efficiently which helps to suggest for replacement of the unit with higher precision.The results have demonstrated that the proposed hybrid modeling approach is effective in classifying the faults of the gearbox from the time series data and achieve higher diagnostic accuracy in comparison to the conventional LSTM methods.

Comparisons of MFDFA, EMD and WT by Neural Network, Mahalanobis Distance and SVM in Fault Diagnosis of Gearboxes

A method for gearbox fault diagnosis consists of feature extraction andfault identification. Many methods for feature extraction have beendevised for exposing nature of vibration data of a defective gearbox. Inaddition, features extracted from gearbox vibration data are identifiedby various classifiers. However, existing literatures leave much to bedesired in assessing performance of different combinatorial methods forgearbox fault diagnosis. To this end, this paper evaluated performance ofseveral typical combinatorial methods for gearbox fault diagnosis byassociating each of multifractal detrended fluctuation analysis (MFDFA),empirical mode decomposition (EMD) and wavelet transform (WT) witheach of neural network (NN), Mahalanobis distance decision rules(MDDR) and support vector machine (SVM). Following this,performance of different combinatorial methods was compared using agroup of gearbox vibration data containing slightly different faultpatterns. The results indicate that MFDFA performs better in featureextraction of gearbox vibration data and SVM does the same in faultidentification. Naturally, the method associating MFDFA with SVMshows huge potential for fault diagnosis of gearboxes. As a result, thispaper can provide some useful information on construction of a methodfor gearbox fault diagnosis.

Measured load spectra of the bearing in high-speed train gearbox under different gear meshing conditions

The load spectrum is a crucial factor for assess-ing the fatigue reliability of in-service rolling element bear-ings in transmission systems.For a bearing in a high-speed train gearbox,a measurement technique based on strain detection of bearing outer ring was used to instrument the bearing and determine the time histories of the distributed load in the bearing under different gear meshing conditions.Accordingly,the load spectrum of the total radial load car-ried by the bearing was compiled.The mean value and class interval of the obtained load spectrum were found to vary non-monotonously with the speed and torque of gear mesh-ing,which was considered to be caused by the vibration of the shaft and the bearing cage.As the realistic service load input of bearing life assessment,the measured load spectrum under different gear meshing conditions can be used to pre-dict gearbox bearing life realistically based on the damage-equivalent principle and actual operating conditions.

Acoustics Based Monitoring and Diagnostics for the Progressive Deterioration of Helical Gearboxes

Gearbox condition monitoring(CM)plays a significant role in ensuring the operational reliability and efficiency of a wide range of critical industrial systems such as wind turbines and helicopters.Accurate and timely diagnosis of gear faults will improve the maintenance of gearboxes operating under sub-optimal conditions,avoid excessive energy consumption and prevent avoidable damages to systems.This study focuses on developing CM for a multi-stage helical gearbox using airborne sound.Based on signal phase alignments,Modulation Signal Bispectrum(MSB)analysis allows random noise and interrupting events in sound signals to be suppressed greatly and obtains nonlinear modulation features in association with gear dynamics.MSB coherence is evaluated for selecting the reliable bi-spectral peaks for indication of gear deterioration.A run-to-failure test of two industrial gearboxes was tested under various loading conditions.Two omnidirectional microphones were fixed near the gearboxes to sense acoustic information during operation.It has been shown that compared against vibration based CM,acoustics can perceive the responses of vibration in a larger areas and contains more comprehensive and stable information related to gear dynamics variation due to wear.Also,the MSB magnitude peaks at the first three harmonic components of gear mesh and rotation components are demonstrated to be sufficient in characterizing the gradual deterioration of gear transmission.Consequently,the combining of MSB peaks with baseline normalization yields more accurate monitoring trends and diagnostics,allowing the gradual deterioration process and gear wear location to be represented more consistently.

A fault feature extraction method of gearbox based on compound dictionary noise reduction and optimized Fourier decomposition

Aimed at the problem that Fourier decomposition method(FDM)is sensitive to noise and existing mode mixing cannot accurately extract gearbox fault features,a gear fault feature extraction method combining compound dictionary noise reduction and optimized FDM(OFDM)is proposed.Firstly,the characteristics of the gear signals are used to construct a compound dictionary,and the orthogonal matching pursuit algorithm(OMP)is combined to reduce the noise of the vibration signal.Secondly,in order to overcome the mode mixing phenomenon occuring during the decomposition of FDM,a method of frequency band division based on the extremum of the spectrum is proposed to optimize the decomposition quality.Then,the OFDM is used to decompose the signal into several analytic Fourier intrinsic band functions(AFIBFs).Finally,the AFIBF with the largest correlation coefficient is selected for Hilbert envelope spectrum analysis.The fault feature frequencies of the vibration signal can be accurately extracted.The proposed method is validated through analyzing the gearbox fault simulation signal and the real vibration signals collected from an experimental gearbox.

基于Gearbox5.0的减速机参数化设计

Gearbox齿轮减速器设计系统是一款齿轮减速器设计及齿轮参数计算系统,Gearbox5.0是基于Windows2000开发的适用于圆柱齿轮减速器、圆锥齿轮减速器和蜗杆蜗轮减速器设计以及齿轮传动机构设计的辅助设计系统。利用Gearbox5.0参数化设计可使设计人员从大量繁琐的设计、计算、绘图工作中解脱出来,提高设计效率,保证产品质量。

An Improved Coupled Dynamic Modelling for Exploring Gearbox Vibrations Considering Local Defects

Gearbox is a key part in machinery,in which gear,shaft and bearing operate together to transmit motion and power.The wide usage and high failure rate of gearbox make it attract much attention on its health monitoring and fault diagnosis.Dynamic modelling can study the mechanism under different faults and provide theoretical foundation for fault detection.However,current commonly used gear dynamic model usually neglects the influence of bearing and shaft,resulting in incomplete understanding of gearbox fault diagnosis especially under the effect of local defects on gear and shaft.To address this problem,an improved gear-shaft-bearing-housing dynamic model is proposed to reveal the vibration mechanism and responses considering shaft whirling and gear local defects.Firstly,an eighteen degree-of-freedom gearbox dynamic model is proposed,taking into account the interaction among gear,bearing and shaft.Secondly,the dynamic model is iteratively solved.Then,vibration responses are expounded and analysed considering gear spalling and shaft crack.Numerical results show that the gear mesh frequency and its harmonics have higher amplitude through the spectrum.Vibration RMS and the shaft rotating frequency increase with the spalling size and shaft crack angle in general.An experiment is designed to verify the rationality of the proposed gearbox model.Lastly,comprehensive analysis under different spalling size and shaft crack angle are analysed.Results show that when spalling size and crack angle are larger,RMS and the amplitude of shaft rotating frequency will not increase linearly.The dynamic model can accurately simulate the vibration of gear transmission system,which is helpful for gearbox fault diagnosis.

Diagnosis of Gearbox Typical Fault in Rolling Mills Based on the Wavelet Packets Technology

The early impulse fault diagnosis of the gearbox in rolling mills is often difficult and labour intensive because the gearbox of that high speed machine is multi-shafting transmission system,in which many gearsets and rolling bears work together at the same time and there are much complex frequency structure and various disturb.A new time-frequency method based on the wavelet packets technique was developed and used to extract the impact feature from signals collected from faulty data of one rolling mills gearbox.The method improves the signal to noise ration so that results obtained using this method represents features with fine resolution in both low-frequency and the high frequency bands.The results of analysis indicate the validity and the practicability of the method proposed here.