The Microstructure and Gelling Mechanism of Thermo-responsive Chitosan Hydrogel System

Thermo-respansive chitosan hydrogel system （TRCHS） was prepared and its mierostructure was investigated by scaning electron microscope （SEM） and mercury intrusion poremaster （MIP）. Based on analyzing the data, a special porosity property was reported at the first time. Its gelling mechanism was studied by a group of contrast experiments. Results may provide experimental and theoretical supports for how to apply it on tissue engineering scaffold and how to influeuee or control its essential properties.

A Review of Soy-Tannin Gelling for Resins Applications

Soy flour(SF),soy protein and soy protein isolates(SPI)have been the focus of increasing research on their application as new materials for a variety of applications,mainly for wood adhesives and other resins.Tannins too have been the focus of increasing research for similar applications.While both materials are classed as non-toxic and have achieved interesting results the majority of the numerous and rather inventive approaches have still relied on some sort of hardeners or cross-linkers to bring either of them or even their combination to achieve acceptable results.The paper after a presentation of the two materials and their characteristics concentrates on the formation of gels,gelling and even hardening in the case of soy-tannin combined resins.The chapter than finishes with details of the formation of resins giving suitable wood adhesive of acceptable performance by the covalent coreaction of soy protein and tannin without any other hardener,thus totally bio-sourced,non-toxic and environment friendly as a base of further advances to expect in future by these two materials combination.

Preparation and properties of high-energy-density aluminum/boroncontaining gelled fuels

Energetic nanofluid fuel has caught the attention of the field of aerospace liquid propellant for its high energy density(HED), but it suffers from the inevitable solid-liquid phase separation problem. To resolve this problem, herein we synthesized the high-Al-/B-containing(up to 30%(mass)) HED gelled fuels, with low-molecular-mass organic gellant Z, which show high net heat of combustion(NHOC), density, storage stability, and thixotropic properties. The characterizations indicate that the application of energetic particles to the gelled fuels obviously destroys their fibrous network structures but can provide the new particle-gellant gelation microstructures, resulting in the comparable stability between 1.0%(mass) Z/JP-10 + 30%(mass) Al or B and pure JP-10 gelled fuel. Moreover, the gelled fuels with high-content Al or B exhibit high shear-thinning property, recovery capability, and mechanical strength, which are favorable for their storage and utilization. Importantly, the prepared 1.0%(mass) Z/JP-10 + 30%(mass) B(or 1.0%(mass) Z/JP-10 + 30%(mass) Al) shows the density and NHOC 1.27 times(1.30) and 1.43 times(1.21)higher than pure JP-10, respectively. This work provides a facile and valid approach to the manufacturing of HED gelled fuels with high content of energetic particles for gel propellants.

Film forming systems for topical and transdermal drug delivery

Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system’s ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier.Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance.For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance.In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions) along with their evaluation parameters have also been reviewed.

Preparation and Properties of Embeddable Ag/Ag Cl Gelling Reference Electrode for Rebars Corrosion Monitoring in Concrete

Reference electrodes are a key part for corrosion monitoring and measurement of rebars in concrete. A reference electrode that can be buried in concrete is fabricated by using Ag/Ag Cl electrode and methyl cellulose gelling electrolyte. The stability, repeatability and anti-polarization of the reference electrode are investigated; the influences of the inner electrolyte loss, exterior OH- contamination, and temperature on the potential of the reference electrode are also investigated in this paper. The results show that the reference electrode has good stability, repeatability, and antipolarization. The influences of inner electrolyte loss, exterior OH- contamination, and temperature on the potential of the reference electrode are minimal. Therefore, it can be used for corrosion monitoring and measurement of rebars in concrete.

Encapsulation of Almond Essential Oil by Co-Extrusion/Gelling Using Chitosan as Wall Material

Encapsulation confers protection to substances as essential oils from processes like oxidation, evaporation or uncontrolled release. In this study almond oil capsules were obtained by co-extrusion/gelling technique. Chitosan was used as shell material and sodium triphosphate pentabasic as cross linking agent. Different encapsulation process variables were studied: cross-linker concentration, nozzles size and potential. Optical microscopy was used to determine the capsules morphology and degradability tests were performed in order to study capsules degradation over time. Results showed that nozzles size and cross linking concentration are key variables to consider in the encapsulation process. Degradability tests showed rapid weight loss.

Microencapsulation of Rosemary Essential Oil by Co-Extrusion/Gelling Using Alginate as a Wall Material

An essential oil is the volatile lipophilic component extracted from plants. Microencapsulation systems protect the essential oil from degradation and evaporation, and at the same time allow a sustained release. This work analyzed and characterized the rosemary essential oil microcapsules prepared by co-extrusion technique using alginate as wall material and calcium chloride as cross linker. Several instrumental techniques were used: optical microscopy, coulter counter, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), termogravimetric analysis (TGA), spectrophotometry, antimicrobial test and chromatography. Results show that rosemary oil has pesticidal properties, and its microencapsulation allows knowing that these properties remain inside the microcapsules.

Extraction and characterization of gelling pectin from the peel of Poncirus trifoliata fruit

In the framework of searching for new pectin sources to partially compensate for domestic and regional demands, the peel (albedo) of the “non-comestible” fruit of Poncirus trifoliata was investigated using a relatively simple experimental design for optimization, in which only the variable was the extraction pH (1.0, 1.5, and 2.0) on the basis of our previous studies on diverse pectin sources. The results showed that the yield of pectin (7.4%-19.8%) was strongly influenced by the extraction pH when the other parameters, namely the solid to liquid extractant (S/L) ratio, temperature (T &degC), and time (t) were fixed to 1:25 (w/v), 75&degC, and 90 min, respectively. Likewise, the galacturonic acid content (GalA: 61.4%-79.2%), total neutral sugar content (TNS: 9.1%-22.5%), degree of branching (3.5%-13.9%), homogalacturonan (HG) to rhamnogalacturonan-I (RG-I) ratio (2.2-5.6), degree of methylesterification (DM: 54-77), viscosity average molecular weight (Mν: 57-82), and gelling capacity (GC: 124-158) were all affected by the extraction pH. The optimum pH for producing pectin with good yield, quality characteristics (GalA > 65%, DM > 60, Mν > 80 kDa), and gelling capacity (GC > 150), from the peel of P. trifoliata fruit, was found to be pH 1.5.

Preparation of Microcapsules Containing Artificial Diet for Tropical Fishes with Spray Gelling Method

The microcapsules containing the artificial diet for tropical fishes were prepared with the spray gelling method in order to prevent water environmental pollution. The carboxymethyl cellulose sodium aqueous solution, in which α-tocopherol droplets containing the powdery artificial diet were dispersed, was dropped or sprayed into the chitosan aqueous solution. Microcapsules were prepared by forming polyionic complex shell made from chitosan and carboxymethyl cellulose sodium. In the experiment, the concentration of carboxymethyl cellulose sodium (CMCNa) was mainly changed to investigate the effect on the diameters of microcapsules, the content and the microencapsulation efficiency. The microcapsules couldn’t be prepared with the concentration of carboxymethyl cellulose sodium less than 3.0 wt%. The microcapsules were the core-shell type. The diameters of microcapsules were increased with the concentration of CMCNa and the microencapsulation efficiency of ca. 100% could be obtained by the preparation method presented in this study. The microcapsules were found to be eaten well by tropical fishes and to prevent water environmental pollution.

基于FPGA的La Gell5/3小波变换的硬件电路设计

为了对冗余的图像数据进行有效的压缩,提出一种基于FPGA的快速小波变换的方案。介绍了La Gell 5/3提升小波变换的原理,设计了适用于高帧频CMOS相机的La Gell 5/3提升小波变换硬件结构,采用Verilog硬件语言在QuartusII软件平台下对设计方案进行了实验,利用Matlab语言对图像进行反变换,并通过变换前与反变换后图像的比对,验证了算法的可行性。实验结果证明:该方案成功实现了基于FPGA的La Gell 5/3提升小波变换系统对给定图像的三级快速小波变换,相比较于DSP等硬件电路,更适合于高速图像实时处理的应用。

High-energy-density gelled fuels with high stability and shear thinning performance

Gelled fuels are the very promising propellants for new-generation rocket and ramjet propulsion.Here we report a new type of low-molecular mass organic gellant(Z),and prepared four kinds of stable gelled fuels based on HD-01,HD-03,RP-3 and QC liquid fuels,with the critical gellant concentration less than 1%(mass).The characterizations show that the gellant can form 3D network structure,via hydrogen bonding,π-πstacking and van der Waals forces,to fix fuel molecules during the formation of gelled fuels.So,the gelled fuels show high stability,with the remaining gel mass of 0.25%(mass)Z/HD-01 more than 90%even at high centrifugal speed of 7500 r·min^(-1),but the rheological property test shows that all gelled fuels have obvious shear thinning property,which benefits its storage in gelled state while supply in liquid state.The gelation of liquid fuels by gellant Z can increase the volumetric net heat of combustion(for HD-01,it increases from 39.58 MJ·L^(-1) to 40.76 MJ·L^(-1) with 1%(mass)Z),and liquefied gelled fuels show the comparable ignition delay time with the pristine liquid fuels.So,the gelled fuels made by gellant Z have better stability,shear thinning and combustion performances,which have great potential for the practical application.

Development of High-Energy-Density Liquid Aerospace Fuel:A Perspective

Aerospace aircraft has significantly improved the life quality of human beings and extended the capability of space explosion since its appearance in 1903,in which liquid propellants or fuels provide the key power source.For jet fuels,its property of energy density plays an important role in determining the flight range,load,and performance of the aircraft.Therefore,the design and fabrication of high-energy-density(HED)fuels attract more and more attention from researchers all over the world.Herein,we briefly introduce the development of liquid jet fuels and HED fuels and demonstrate the future development of HED fuels.To further improve the energy density of fuel,the approaches of design and construction of multi-cyclic and stained molecule structures are proposed.To break through the density limit of hydrocarbon fuels,the addition of energetic nanoparticles in HED fuels to produce nanofluid or gelled fuels may provide a facile and effective method to significantly increase the energy density.This work provides the perspective for the development of HED fuels for advanced aircrafts.

Experimental research on characteristic of start-up pressure wave propagation in gelled crude oil by large-scale flow loop

In order to research start-up pressure wave propagation mechanism and determine pressure wave speed in gelled crude oil pipelines accurately,experiment of Large-scale flow loop was carried out.In the experiment,start-up pressure wave speeds under various operation conditions were measured,and effects of correlative factors on pressure wave were analyzed.The experimental and theoretical analysis shows that thermal shrinkage and structural properties of gelled crude oils are key factors influencing on start-up pressure wave propagation.The quantitative analysis for these effects can be done by using volume expansion coefficient and structural property parameter of gelled crude oil.A new calculation model of pressure wave speed was developed on the basis of Large-scale flow loop experiment and theoretical analysis.

Numerical simulation of the blocking process of gelled particles in porous media with remaining polymers

Gelled particles can be transferred deeply inside oil reservoirs to block water channels due to their physicochemical characteristics, including swelling, deformation, and synergetic effect （reacting with polymers）, and then the injection profiles are significantly modified. At present, research on gelled particles is mainly focused on laboratory studies of drive mechanisms, and rarely on mathematical models describing the blocking process of gelled particles. In this paper, the blocking process of gelled particles is divided into two sub-processes： deposition and desorption due to particle deformation. A mathematical model based on filtration theory is proposed considering the effect of characteristics of gelled particles on the blocking process. Blocking laws were simulated and researched using the mathematical model. Results of the simulation of the blocking of gelled particles are quite consistent with the experimental results, which confirms the reliability of the mathematical model developed.

Microemulsion-based hydrogels of itraconazole:Evaluation of characteristics and stability

Itraconazole (ITZ) is a broad spectrum triazole antifungal drug and commercially available as oral forms. However, effective topical forms are interesting to avoid systemic adverse effects,to directly deliver antifungal drugs to the target sites and to enhance patient compliance (1)Microemulsion-based hydrogel (MBH), a semisolid form of microemulsion (ME), is one of novel formulations practically used as topical drug carriers [2].

Carobomer Based Controlled Release Designs of Atorvastatin Calcium Tablets Evaluated Using Quality by Design (QbD) Approach

The study carried out here was focused on developing conventional monolithic controlled release matrix tablet of Atorvastatin calcium using carbomer as release controlling polymer. This system ensures the drug release at the alkaline pH region where the drug has got maximum solubility. Further the study was concentrated on comparing the impact of gelling agent polyvinyl pyrrolidone on drug release. Quality by design tools were considered during formulation development and the polymer concentrations were optimized adopting the statistical tool, design of experiments (DoE). The optimized formulation of present study exhibited desired controlled drug release characteristics in the alkaline pH conditions and at acidic environment the drug dissolution was minimal as intended.

Application of Antimicrobial Microcapsules on Agrotextiles

The aim of this work was to develop a functional biodegradable nonwoven with antimicrobial microcapsules maintaining the stability and biodegradability of the nonwoven for use in agriculture applications. The nonwoven was obtained using hemp fibers by Wetlaid technology. Microcapsules were prepared by co-extrusion/gelling method with alginate as shell and oregano oil as core material. The microcapsules were developed to protect and control release of oregano oil. Microcapsules were incorporated on the nonwoven by coating method using a natural polymer as a graft material. After incorporating micro-capsules, the nonwoven was subjected to several tests in order to determinate the microcapsules fixation and their functionality. The nonwovens were characterized for their antimicrobial activity against different kinds of bacteria and fungi. Nonwoven loaded with microcapsules was found to show good antimicrobial activity in comparison with nonwoven that was not loaded with microcapsules.

Recovery of Level Pillar between Open-pit and Underground Mine by Using Underhand Heading Fill Method

The upper part of the Fujia deposit was mined out by open-pit, and the lower part is being mined underground. The level pillar between open-pit and underground mine had a thickness of 24 m, a length of 300 m and a maximum width of 35 in. As the level pillar contained about 5.2 million ton ore of high nickel grade, it was necessary to recover the level pillar. Because of special need of safety, underhand heading cut-and-fill stoping method was used. For the first two layers of heading, the cemented fill materials were a mix of water and high-aluminum-content cement with silicate gelling agent; and for other heading layers, total tailings was added into the fill mix in order to reduce the cement consumption. Finally, the level pillar was recovered successfully.

Gelle试验假阴性原因初步分析

目的 分析Gelle（盖莱）试验假阴性的原因。方法 2013年8月-2014年7月间因耳聋或耳鸣就诊的60例（120耳）患者行纯音听阈（PTA）、声导抗、畸变产物耳声发射（DPOAE）测试和Gelle试验,根据Gelle试验为阴性、但纯音测听显示为感音神经性聋或听阈正常则初步判定为Gelle试验“假阴性”;分析Gelle试验阴性耳中假阴性耳数及可能原因。结果 60例（120耳）纯音测听显示：7耳为传导性聋,23耳为混合性聋,52耳为感音神经性聋,38耳纯音听阈正常,这4类纯音测听结果相对应的Gelle试验阴性耳分别为5、11、16、3耳,其中19耳判定为“假阴性”（3耳纯音听阈正常,16耳为感音神经性聋）。110耳同时进行了声导抗测试,鼓室图为A、B及C型者分别为102、2、6耳,这三类鼓室导抗图者Gelle试验阴性者分别为22、2、4耳（其中假阴性分别为A型12耳,As型2耳,Ad型1耳,C型2耳）;113耳同时进行了DPOAE测试,56耳可引出,57耳未引出,Gelle试验阴性者DPOAE引出和未引出分别为12、17耳（其中假阴性分别为DPOAE引出10耳、未引出8耳）。结论 各种类型的听力损失患者中均存在Gelle试验阴性者,但部分受试者可能为Gelle试验假阴性。在诊断听骨链异常时,Gelle试验检查只能作为辅助检查手段,须结合病史、纯音测听、声导抗、DPOAE等检查综合判断。

Effect of Polysaccharide Species on Storage Stability of Alginate Capsules Containing <i>α</i>-Tocopherol

Alginate capsules containing α-tocopherol were prepared adding polysaccharide species such as κ-carrageenan, gellan gum, pectin, curdlan and ghatti gum. The effects of polysaccharide species and the diameters of α-tocopherol on storage stability of the capsules were investigated and characterized in detail. As the contact angle of α-tocopherol to the capsule shell strongly affected storage stability, the contact angle was measured on the model sheet made of calcium alginate with polysaccharide species. The leakage ratio decreased with the contact angle and increased with the diameter of α-tocopherol. The capsules made of calcium alginate with gellan gum showed the largest contact angle and the highest storage stability. The capsules made of calcium alginate with curdlan, ghatti gum and pectin were harder than other capsules and showed higher storage stability. All the capsules showed the almost similar swelling ratio in the acidic solution with pH 4, but showed the different swelling ratios according to the polysaccharide species in the alkali solution with pH 9. The tablets were prepared with the wet and the dried capsules. The tablets prepared with the dried capsules showed higher storage stability.