Geochemical Modeling and Statistical Analysis for Groundwater Evolution Assessment in Wadi Qasab, Sohag, Eastern Desert, Egypt

Qasab basin is one of the most promising areas for the sustainable development in the Eastern Desert fringes of the Nile Valley, Egypt. The integration between statistical analysis, stable isotopes as well as geochemical modeling tools delineated the geochemical possesses affecting groundwater quality and detected the main recharge source in Qasab basin. The most of groundwater samples are brackish (88%), while the minority (12%) of the samples are fresh. The electrical conductivity of groundwater ranged from 1135 to 10,030 μS/cm. The statistical analysis and hydrochemical diagrams suggest that the groundwater quality is mainly controlled by several intermixed processes (rock weathering and agricultural activities). The mineralization of the Pleistocene groundwater is regulated by the rock weathering source, evaporation processes and reverse cation exchange. The isotopic signatures (δ2H and δ18O) represent two groundwater groups. The first group, is enriched with the isotopic signature of δ18O, which ranges from 0.9‰ to 5.5‰. This group is mostly affected by the recent meteoric recharge from the surface water leakage. The second group, is relatively depleted with the isotopic signature of δ18O, reflecting a palaeo recharge source of colder climate. The δ18O‰ varies from -10.1‰ to -6.4‰, indicating upward leakage of the Nubian sandstone aquifer through deep seated faults. The inverse geochemical model reflects that the salinity source of the groundwater samples is due to the leaching and dissolution processes of carbonate, sulphate and chloride minerals from the aquifer matrix. This study can demonstrate the hydrochemistry assessment guide to support sustainable development in Qasab basin to ensure that adequate groundwater management can play to reduce poverty and support socioeconomic development.

Geochemical and Behavioral Modeling of Phosphorus and Sulfur as Deleterious Elements of Iron Ore to Be Used in Geometallurgical Studies, Sheytoor Iron Ore, Iran

Sheytoor Iron Ore deposit is located in Yazd province of Iran (Bafq). The most abundant ore is magnetite, which can be seen in the form of mass and granular tissue in various forms of self-shaped, semi-self-shaped and amorphous. The main purpose of this study is to identify the geochemical relationship of phosphorus and sulfur elements and also three-dimensional modeling of mineralization of these elements in iron ore. In order to achieve the research goal, methods such as k-mean clustering technique, concentration-volume fractal as well as block modeling with kriging estimator and Inverse Distance Weighting (IDW) interpolator were used. The model of geochemical behavior of phosphorus and sulfur elements compared to iron is of great importance because these two elements are known as deleterious elements in mineral processing and steelmaking processes, which are the post-mining stages. Existence of geochemical model and identification of elements’ behavior towards each other play a key role in optimizing mining operations in order to achieve geometallurgical goals. The results of this study are the three-dimensional model of mineralization of iron, phosphorus and sulfur elements, separation of phosphorus and sulfur mineralization communities and also presenting the model of enrichment community of these two elements. All the results are in line with geometallurgical studies and can optimize the next steps by optimizing the mining process.

Evaluation of hydro-chemistry in a phreatic aquifer in the Vindhyan Region, India, using entropy weighted approach and geochemical modelling

Groundwater quality monitoring and geochemical characterization in the phreatic aquifer are critical for ensuring universal and equitable access to clean,reliable,and inexpensive drinking water for all.This research was intended to investigate the hydrogeochemical attributes and mechanisms regulating the chemistry of groundwater as well as to assess spatial variation in groundwater quality in Satna district,India.To accomplish this,the groundwater data comprising 13 physio-chemical parameters from thirty-eight phreatic aquifer locations were analysed for May 2020 by combining entropy-weighted water quality index(EWQI),multivariate statistics,geochemical modelling,and geographical information system.The findings revealed that the groundwater is fresh and slightly alkaline.Hardness was a significant concern as 57.89% of samples were beyond the permissible limit of the World Health Organisation.The dominance of ions were in the order of Ca^(2+)> Na^(+)> Mg^(2+)> K^(+) and HCO_(3)^(-)> SO_(4)^(2-)> Cl^-> NO_(3)^(-)> F^(-).Higher concentration of these ions is mainly concentrated in the northeast and eastern regions.Pearson correlation analysis and principal component analysis(PCA) demonstrated that both natural and human factors regulate groundwater chemistry in the region.The analysis of Q-mode agglomerative hierarchical clustering highlighted three significant water clusters.Ca-HCO_3 was the most prevalent hydro-chemical facies in all three clusters.Geochemical modelling through various conventional plots indicated that groundwater chemistry in the research region is influenced by the dissolution of calcite/dolomite,reverse ion exchange,and by silicate and halite weathering.EWQI data of the study area disclosed that 73.69% of the samples were appropriate for drinking.Due to high salinity,Magnesium(Mg^(2+)),Nitrate(NO_(3)^(-)),and Bicarbonate(HCO_(3)^(-)) concentrations,the north-central and north-eastern regions are particularly susceptible.The findings of the study may be accomplished by policymakers and groundwater managers to achieve sustainable groundwater development at the regional scale.

Groundwater quality assessment using multivariate analysis,geostatistical modeling, and water quality index(WQI): a case of study in the Boumerzoug-El Khroub valley of Northeast Algeria

In this study,the analytical data set of 26 groundwater samples from the alluvial aquifer of Boumerzoug-E1 khroub valley has been processed simultaneously with Multivariate analysis,geostatistical modeling,WQI,and geochemical modeling.Cluster analysis identified three main water types based on the major ion contents,where mineralization increased from group 1 to group 3.These groups were confirmed by FA/PCA,which demonstrated that groundwater quality is influenced by geochemical processes(water-rock interaction)and human practice(irrigation).The exponential semivariogram model WQI.Groundwater chemistry has a strong spatial structure for Mg,Na,Cl,and NO3,and a moderate spatial structure for EC,Ca,K,HCO3,and SO4.Water quality maps generated using ordinary Kriging are consistent with the HCA and PCA results.All water groups are supersaturated with respect to carbonate minerals,and dissolution of kaolinite and Ca-smectite is one of the processes responsible for hydrochemical evolution in the area.

Effects of acid-rock reaction on physical properties during CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)injection in shale reservoirs

"Carbon peaking and carbon neutrality"is an essential national strategy,and the geological storage and utilization of CO_(2)is a hot issue today.However,due to the scarcity of pure CO_(2)gas sources in China and the high cost of CO_(2)capture,CO_(2)-rich industrial waste gas(CO_(2)-rich IWG)is gradually emerging into the public's gaze.CO_(2)has good adsorption properties on shale surfaces,but acidic gases can react with shale,so the mechanism of the CO_(2)-rich IWG-water-shale reaction and the change in reservoir properties will determine the stability of geological storage.Therefore,based on the mineral composition of the Longmaxi Formation shale,this study constructs a thermodynamic equilibrium model of water-rock reactions and simulates the regularity of reactions between CO_(2)-rich IWG and shale minerals.The results indicate that CO_(2)consumed 12%after reaction,and impurity gases in the CO_(2)-rich IWG can be dissolved entirely,thus demonstrating the feasibility of treating IWG through water-rock reactions.Since IWG inhibits the dissolution of CO_(2),the optimal composition of CO_(2)-rich IWG is 95%CO_(2)and 5%IWG when CO_(2)geological storage is the main goal.In contrast,when the main goal is the geological storage of total CO_(2)-rich IWG or impurity gas,the optimal CO_(2)-rich IWG composition is 50%CO_(2)and 50%IWG.In the CO_(2)-rich IWG-water-shale reaction,temperature has less influence on the water-rock reaction,while pressure is the most important parameter.SO2 has the greatest impact on water-rock reaction in gas.For minerals,clay minerals such as illite and montmorillonite had a significant effect on water-rock reaction.The overall reaction is dominated by precipitation and the volume of the rock skeleton has increased by 0.74 cm3,resulting in a decrease in shale porosity,which enhances the stability of CO_(2)geological storage to some extent.During the reaction between CO_(2)-rich IWG-water-shale at simulated temperatures and pressures,precipitation is the main reaction,and shale porosity decreases.However,as the reservoir water content increases,the reaction will first dissolve and then precipitate before dissolving again.When the water content is less than 0.0005 kg or greater than 0.4 kg,it will lead to an increase in reservoir porosity,which ultimately reduces the long-term geological storage stability of CO_(2)-rich IWG.

Reactive Transport Process of Earthquake-induced Hydrochemical Changes in Guanding Thermal Spring,Western Sichuan,China

Earthquake-related hydrochemical changes in thermal springs have been widely observed;however,quantitative modeling of the reactive transport process is absent.In the present study,we apply reactive transport simulation to capture the hydrochemical responses in a thermal spring following the Wenchuan Ms 8.0 and Lushan Ms 7.0 earthquakes.We first constrain deep reservoir geothermal fluid compositions and temperature by multicomponent geothermometry,and then a reactive geochemical transport model is constructed to reproduce the hydrochemical evolution process.The results show that the recharge from the shallow aquifer increases gradually until it reaches a peak because of the permeability enhancement caused by the Lushan earthquake,which may be the mechanism to explain the earthquake-related hydrochemical responses.In contrast to the postseismic effect of the Wenchuan earthquake,the chemical evolution can be considered as hydrochemical anomalies related to the Lushan earthquake.This study proves that the efficient simulation of reactive transport processes is useful for investigating earthquake-related signals in hydrochemical time series.

Petro Gram: An excel-based petrology program for modeling of magmatic processes

Petro Gram is an Excel?based magmatic petrology program that generates numerical and graphical models.Petro Gram can model the magmatic processes such as melting,crystallization,assimilation and magma mixing based on the trace element and isotopic data.The program can produce both inverse and forward geochemical models for melting processes(e.g.forward model for batch,fractional and dynamic melting,and inverse model for batch and dynamic melting).However,the program uses a forward modeling approach for magma differentiation processes such as crystallization(EC:Equilibruim Crystallization,FC:Fractional Crystallization,IFC:Imperfect Fractional Crystallization and In-situ Crystallization),assimilation(AFC:Assimilation Fractional Crystallization,Decoupled FC-A:Decoupled Fractional Crystallization and Assimillation,A-IFC:Assimilation and Imperfect Fractional Crystallization)and magma mixing.One of the most important advantages of the program is that the melt composition obtained from any partial melting model can be used as a starting composition of the crystallization,assimilation and magma mixing.In addition,Petro Gram is able to carry out the classification,tectonic setting,multi-element(spider)and isotope correlation diagrams,and basic calculations including Mg^#,Eu/Eu^*,εSrandεNdwidely used in magmatic petrology.

Evaluation of groundwater quality in the Dibdibba aquifer using hydrogeochemical and isotope techniques(Basrah Province,Iraq)

The Dibdibba aquifer is considered to be the main source in the Al-Zubair area because agriculture depends on it to provide grazing water in the area.The groundwater well samples were collected from the shallow Dibdibba Aquifer in Basra Province,southern Iraq,through the dry and wet period for 37 water samples were collected,to investigate the water quality deterioration,which is a hydrogeochemical modeling study where used to represent the groundwater mixing evaluation.The physicochemical parameter results show the spatial and temporal variations along the groundwater flow path.A Durov diagram of the studied samples shows water type Na-SO_(4),which is represented by mixing waters that may be affected by dissolution.Inverse geochemical model ratio results of the groundwater well samples have shown high mixing ratios in the east and southeast regions of the study area.The stable isotope composition of groundwater samples indicated that the recharge source of the Dibdibba aquifer is meteoric water influenced by vapor water from the Arabian Gulf.The stable isotope results have shown that the enrichment ofδO values is relatively linked with high salinity concentration and indicated the mixing between the upper unconfined and the lower confined,especially in the eastern and southern parts of the study area.These findings of geochemical modeling and isotopes indicated an increasing groundwater quality deterioration.Thus,we recommended avoiding these areas for intensive extraction of groundwater.

Models of Spatial Structures of Regional Multi-element Geochemical Anomalies over Copper-Polymetallic Orefields

Regional stream sediment surveys at a 1:200,000 scale reveal positive andnegative regional multi-element geochemical anomalies over medium to large copper-polymetallicorefields of different genetic types in China. Regional geochemical anomalies of orefield refer tothose geochemical anomalies that are related to metallogenesis of an orefield in a certain area. Theanomaly area is typically 10 to 100 km^2. The regional multi-element anomalies related tomineralization can be divided into three groups, that is, the ore-element anomaly association,indicator element anomaly association, and metallogenic environmental element anomaly association.Their common spatial distributions over ore deposits or orefields possess unique structures. Themodel of spatial structure of regional multi-element geochemical anomalies (RAGSS) of an orefielddelineates structural feature possessed by orderly spatial distributions of different groups ofmulti-element anomaly associations related to orefield metallogenesis. It is used to outline thecommon metallogenetic anomaly visage that is composed of the orderly spatial distribution ofdifferent groups of multi-element anomaly associations. The orderly spatial distribution ofmulti-element anomalies over an orefield reflects element distributions as they are changed from adispersed 'out-of-order' state into a concentrated 'orderly' state during the mineralization of anorefield. Three different patterns of the spatial anomaly structure related to mineralization in anorefield can be concluded: (1) nested pattern; (2) eccentric pattern and; (3) peripheral pattern.There are marked differences between multi-element anomaly patterns related and not related tomineralization. RAGSS models of orefields can be used to better understand and evaluate regionalmulti-element anomalies and identify ore types.

Geochemical Characteristics of Rare Earth Elements in Guposhan Granite Complex and Their Petrogenetic Implication

In this paper the geochemical characteristics of rare earth elements in Guposhan granite complex in Nanling Area,South China,is systematically studied,and the balance of REE distribution in rock-forming minerals, which contain only 21.47～29.71 wt% of total REE in granites,is calculated.The petrogenetic relationship be- tween three different stages of the granites in the complex is discussed,and a geochemical model is suggested for the formation of granitic magma in early stage by partial melting of the crustal basement rocks containing more REE than that in the late stage.It shows that a ion-adsorption type of REE deposit could ocuur in the weath- ering crust on the early stage granite.Rb-Sr isotope isochron dating of the first stage medium-coarse-grained K-feldspar granite shows that its age is 146.5 Ma and initial ^(87)Sr/^(86)Sr ratio is 0.71198.

Processes of hydrogeochemical evolution of groundwater in the Guanzhong Basin, China

This paper analyzed regional hydrogeochemical evolution characteristics of groundwater with respect to hydrogeological conditions in the Guanzhong Basin, China. Coefficient variation in the subregion between the Shichuan River and Luo River of the Guanzhong Basin is larger than other subregions, reflecting the more complicated hydrogeological conditions of this subregion. The hydrochemical components and hydrodynamic conditions of this area have distinct horizontal zoning characteristics, and hydrodynamic conditions play a controlling role in the groundwater’s hydrochemistry. The relationship between ions, and between ions and TDS（total dissolved solids） can give an indication of many charteristics of grounwater such as evaporation intensity, ion exchange, and the sources of chemical components. Results indicated that for the coefficient of variation（the coefficient of variation is a statistical measure of the distribution or dispersion of data around mean. This measure is used to analyze the difference of spread in the data relative to the mean value. Coefficient of variation is derived by dividing the standard deviation by the mean）, the minimum value of pH parameters is 0.03-0.07, the minimum value of HCO3-parameters is 0.24, while the maximum is the SO42-coefficinet at 1.67. A PHREEQC simulation demonstrated that different simulation paths roughly have the same trend in dissolution and precipitation of minerals. Along the direction of groundwater flow, the predminant precipitation is of calcite and gypsum and the cation exchange of Na+ and Ca2+ in some paths. However, in other paths, the precipitation of calcite and dissolution of gypsum and dolomite are the main actions, as well as the exchange of Mg2+ and Ca2+ in addition to Na+ and Ca2+.

A New Geochemical Reaction Model for Groundwater Systems

Through a survey of the literature on geology, hydrogeology and hydrogeochemistry, this paper presents a hydrogeochemical model for the groundwater system in a dross-dumping area of the Shandong Aluminium Plant. It is considered that the groundwater-bearing medium is a mineral aggregate and that the interactions between groundwater and the groundwater-bearing medium can be described as a series of geochemical reactions. On that basis, the principle of minimum energy and the equations of mass balance, electron balance and electric neutrality are applied to construct a linear programming mathematical model for the calculation of mass transfer between water and rock with the simplex method.

The Geochemical Characteristics and Minerogenic Model for the Amo Hypothermal Tin Deposit in Ximeng County, Yunnan Province

Through studies on the element geochemistry, alteration of country rocks, ore-forming fluids and isotopegeochemistry of the Arno tin deposit in the metamorphic rocks of the Upper Proterozoic Ximeng Group, theauthors consider that the concentration of the B-F-Li-Rb-Cs-Sn association is related to acidic magmatism inthe study area. The Fe-Mg-Li tourmaline in the ore is the replaced product of the country rocks byhypothermal fluid. The δ^(18)O values of mineral separates are +2.01- +13.16‰ and their δ^(34)S values, +2.6-+7.2‰. The ore-forming materials were derived from hydrothermal fluid of granitic magma. For themineralization, the temperature is 450°-350℃, the pressure, 450-1000×10~5 Pa, and the age, Himalayan(21.5 Ma). According to the geochemical characteristics, a minerogenic model is established: the deposit is ahypothermal cassiterite-quartz vein type tin deposit controlled by the hidden Himalayan granites.

Geochemical fractionation and potential release behaviour of heavy metals in lead–zinc smelting soils

The lack of understanding of heavy metal speciation and solubility control mechanisms in smelting soils limits the effective pollution control.In this study smelting soils were investigated by an advanced mineralogical analysis(AMICS),leaching tests and thermodynamic modelling.The aims were to identify the partitioning and release behaviour of Pb,Zn,Cd and As.The integration of multiple techniques was necessary and displayed coherent results.In addition to the residual fraction,Pb and Zn were predominantly associated with reducible fractions,and As primarily existed as the crystalline iron oxide-bound fractions.AMICS quantitative analysis further confirmed that Fe oxyhydroxides were the common dominant phase for As,Cd,Pb and Zn.In addition,a metal arsenate(paulmooreite)was an important mineral host for Pb and As.The pH-stat leaching indicted that the release of Pb,Zn and Cd increased towards low pH values while release of As increased towards high p H values.The separate leaching schemes were associated with the geochemical behaviour under the control of minerals and were confirmed by thermodynamic modelling.PHREEQC calculations suggested that the formation of arsenate minerals(schultenite,mimetite and koritnigite)and the binding to Fe oxyhydroxides synchronously controlled the release of Pb,Zn,Cd and As.Our results emphasized the governing role of Fe oxyhydroxides and secondary insoluble minerals in natural attenuation of heavy metals,which provides a novelty strategy for the stabilization of multi-metals in smelting sites.

Three-dimensional Modeling of Ore-forming Elements and Mineralization Prognosis for the Yechangping Mo Deposit,Henan Province,China

Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking markers.The Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China Block.Abundant borehole data on oreforming elements underpin deep geochemical predictions.The methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)Correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.

Reactive Transport Modeling of Long-Term CO2 Sequestration Mechanisms at the Shenhua CCS Demonstration Project,China

Carbon dioxide injection into deep saline aquifers results in a variety of strongly coupled physical and chemical processes. In this study, reactive transport simulations using a 2-D radial model were performed to investigate the fate of the injected CO2, the effect of CO2-water-rock interactions on mineral alteration, and the long-term CO2 sequestration mechanisms of the Liujiagou Formation sandstone at the Shenhua CCS（carbon capture and storage） pilot site of China. Carbon dioxide was injected at a constant rate of 0.1 Mt/year for 30 years, and the fluid flow and geochemical transport simulation was run for a period of 10 000 years by the TOUGHREACT code according to the underground conditions of the Liujiagou Formation. The results show that different trapping phases of CO2 vary with time. Sensitivity analyses indicate that plagioclase composition and chlorite presence are the most significant determinants of stable carbonate minerals and CO2 mineral trapping capacity. For arkosic arenite in the Liujiagou Formation, CO2 can be immobilized by precipitation of ankerite, magnesite, siderite, dawsonite, and calcite for different mineral compositions, with Ca（2＋）, Mg（2＋）, Fe（2＋） and Na＋ provided by dissolution of calcite, albite（or oligoclase） and chlorite. This study can provide useful insights into the geochemistry of CO2 storage in other arkosic arenite（feldspar rich sandstone） formations at other pilots or target sites.

Role of Hematite-Rich Host Rocks in the Gold Mineralization of the Woxi Au(-Sb-W) Ore Deposit in Western Jiangnan Orogen of South China

The formation of many hydrothermal gold deposits is closely related to iron-rich rocks. The host rocks of the Madiyi Formation of the Mid-to Late Neoproterozoic Banxi Group for the Woxi Au(-Sb-W) deposit, which is located in western Hunan Province of the western Jiangnan Orogen, South China, is rich in hematite, which provides a good example for studying the relationship between the formation of gold deposit and iron-rich rocks. Field investigation and petrographic observation on the unaltered, weakly altered and strongly altered rocks demonstrate that the bleaching is caused by a combination of carbonatization, sulfidation and sericitization. Mass balance calculation suggests that, during decolourization there is no change in TFe_(2)O_(3), while FeO is gained and Fe_(2)O_(3)is lost. Geochemical modeling found that Au was mainly present as AuHS(aq) and Au(HS)-2, and that the water-rock interactions decreased the sulfur fugacity which destroyed the stability of such aqueous complexes. Combined with the locally occurred native gold in quartz veins, it is concluded that the major gold precipitation mechanisms are sulfidation and fluid boiling. Based on previous geochronological and geochemical research further gold mineralization is proposed to be generated by deep sourced magmatic or metamorphic fluid migrated upward along the Woxi fault, and the iron-rich Madiyi Formation is the idea chemical trap for gold deposition. The decrease of sulfur contents caused by fluid-rock interactions and fluid boiling are the major mechanisms for gold mineralization.

Precipitation of Calcite Veins in Serpentinized Harzburgite at Tianxiu Hydrothermal Field on Carlsberg Ridge(3.67°N),Northwest Indian Ocean:Implications for Fluid Circulation

Serpentinization and calcite precipitation of mantle peridotites exhumed along detachment faults at the slow-to ultraslow-spreading centers can provide important clues to the hydrothermal alteration processes.The Tianxiu hydrothermal field is a new-found active and ultramafichosted hydrothermal vent site along the Carlsberg Ridge,Northwest Indian Ocean.Two types of calcite veins are recognized in serpentinized harzburgite samples collected from the seafloor at the water depth of 3 500 m(3.67°N/63.83°E) and 400 m north of Tianxiu hydrothermal field.Calcite veins Ⅰ occur in the fractures that cut through mesh texture in the highly serpentinized harzburgite,while calcite veins Ⅱ precipitate within the mesh texture in the relatively weaker serpentinized harzburgite.Both veins show similar δ13CPDB(+0.54‰ and +0.58‰) but different δ18OPDB(-16.67‰ and +4.46‰) values,suggesting that they were derived from the same carbon source but precipitated at different temperatures.Taking the deep seawater temperature of 2℃as the precipitation temperature of the calcite veins I,the equilibrium δ18OV-SMOW of calcite-precipitating fluid was calculated to be 1.78‰,which is close to the average δ18OV-SMOW value(1.74‰) of vent fluid samples from the ultramafic-hosted hydrothermal systems worldwide.The formation temperature of calcite veins Ⅱ is inferred to be approximately 134℃,based on the calculated δ18OV-SMOW above.The temperature differences of calcite precipitation probably resulted from the fluid cooling conductively and mixing with seawater along the presumed fractures during slow upflow.The low-temperature calcite postdates the mesh texture,while the high-temperature calcite may precipitate under relatively low water/rock ratios,alkaline and reduced conditions among the mesh texture,which is revealed by the geochemical models.Therefore,it is suggested that they both have been influenced by hydrothermal fluids and the sampling site is near the discharge zone of hydrothermal circulation.

The influence of curing conditions on the mechanical properties and leaching of inorganic polymers made of fayalitic slag

This study reports on the impact of the curing conditions on the mechanical properties and leaching of inorganic polymer （IP） mortars made from a water quenched fayalitic slag. Three similar IP mortars were produced by mixing together slag, aggregate and activating solution, and cured in three different environments for 28 d： a） at 20℃ and relative humidity （RH） - 50% （T20RH50）, b） at 20℃and RH≥90% （T20RH90） and c） at 60℃ and RH - 20% （T60RH20）. Compressive strength （EN 196-1） varied between 19 MPa （T20RH50） and 31 MPa （T20RH90）. This was found to be attributed to the cracks formed upon curing. Geochemical modelling and two leaching tests were performed, the EA NEN 7375 tank test, and the BS EN 12457-1 single batch test. Results show that Cu, Ni, Pb, Zn andAs leaching occurred even at high pH, which varied between 10 and 11 in the tank test＇s leachates and between 12 and 12.5 in the single batch＇s leachates. Leaching values obtained were below the requirements for non-shaped materials of Flemish legislation for As, Cu and Ni in the single batch test.

The potential leaching and mobilization of trace elements from FGD-gypsum of a coal-fired power plant under water re-circulation conditions

Experimental and geochemical modelling studies were carried out to identify mineral and solid phases containing major, minor, and trace elements and the mechanism of the retention of these elements in Flue Gas Desulphurisation（FGD）-gypsum samples from a coal-fired power plant under filtered water recirculation to the scrubber and forced oxidation conditions. The role of the p H and related environmental factors on the mobility of Li, Ni, Zn, As, Se, Mo, and U from FGD-gypsums for a comprehensive assessment of element leaching behaviour were also carried out. Results show that the extraction rate of the studied elements generally increases with decreasing the p H value of the FGD-gypsum leachates. The increase of the mobility of elements such as U, Se, and As in the FGD-gypsum entails the modification of their aqueous speciation in the leachates; UO2SO4, H2 Se, and HAs O2 are the aqueous complexes with the highest activities under acidic conditions.The speciation of Zn, Li, and Ni is not affected in spite of p H changes; these elements occur as free cations and associated to SO4 ^2 in the FGD-gypsum leachates. The mobility of Cu and Mo decreases by decreasing the p H of the FGD-gypsum leachates, which might be associated to the precipitation of Cu Se2 and Mo Se2, respectively. Time-of-Flight mass spectrometry of the solid phase combined with geochemical modelling of the aqueous phase has proved useful in understanding the mobility and geochemical behaviour of elements and their partitioning into FGD-gypsum samples.