The gravity and magnetic survey lines of about 13,500 km were carried out in the centraland northern parts of the South China Sea from 1977 to 1978. The results obtained showthat the Bouguer gravity and magnetic anoma...The gravity and magnetic survey lines of about 13,500 km were carried out in the centraland northern parts of the South China Sea from 1977 to 1978. The results obtained showthat the Bouguer gravity and magnetic anomalies have a tendency to increase gradually theirvalues from the northern continental shelf, through the slope, to the central abyssal basin of theSouth China Sea. The change in free-air gravity anomaly values coincides to a certain degreewith the undulation of the sea-bottom topography. The primary factor determining regionalvariation of the Bouguer gravity anomayl values is the Moho depth. The main factor deter-mining the magnetic anomly values is the nature of the basement rock. The high magnetieand Bouguer gravity anomaly values observed in some fault basin areas are inferred to becaused by draping the basic and ultrabasic magma extruding along the faults on the basementof the metamorphic rock,or by intrusion of the same magma into the basement.展开更多
Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this ana...Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this analysis is based on a database-driven pattern and focuses on the discrete and irregular features of geological data. The geological data from a variety of sources covering a range of accuracy, resolution, quantity and quality are classified and integrated according to their reliability and consistency for 3D modeling. The new interpolation-approximation fitting construction algorithm of geological surfaces with the non-uniform rational B-spline(NURBS) technique is then presented. The NURBS technique can retain the balance among the requirements for accuracy, surface continuity and data storage of geological structures. Finally, four alternative 3D modeling approaches are demonstrated with reference to some examples, which are selected according to the data quantity and accuracy specification. The proposed approaches offer flexible modeling patterns for different practical engineering demands.展开更多
3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situa...3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situations. This paper summarizes the general concept of geological modeling; compares the characteristics of borehole-based modeling, cross-section based modeling and multi- source interactive modeling; analyses key techniques in 3-D geological modeling; and highlights the main difficulties and directions of future studies.展开更多
A magnetotelluric study was carried out in the Xuefeng mountain uplift belt and its western margins. A detailed investigation was made of the resistivity of the formations, and reliable data were obtained. The sedimen...A magnetotelluric study was carried out in the Xuefeng mountain uplift belt and its western margins. A detailed investigation was made of the resistivity of the formations, and reliable data were obtained. The sedimentary cover and basement structure of the Xuefeng mountain area and the deep geological structure were analyzed in detail using magnetotelluric data from the twodimensional inversion of the resistivity profile data in combination with regional gravity and magnetic data. It was concluded that the tectonic movements were characterized by basement detachment, and north-south ramp.The study area can be divided into a southern uplift zone, a southern thrust-faulted zone, a central uplift zone, and a northern depression zone. This work has provided geophysical evidence that can be used in future studies of the tectonics and petroleum geology of this region.展开更多
During 1960—1990, an extensive geological-geophysical investigation was carried out in the marine areas of China. According to the materials obtained, the 'Geological—Geophysical Serial Maps of the China Seas an...During 1960—1990, an extensive geological-geophysical investigation was carried out in the marine areas of China. According to the materials obtained, the 'Geological—Geophysical Serial Maps of the China Seas and the Adjacent Areas (1:2,000,000)' was compiled. In fact, it is a systematic summary of the geological and geophysical work of the China Seas in the past 30 years.In this paper, the author explains the guiding thought and methodology of the compilation of the serial maps, and then briefly discusses the characteristics of geophysical fields and geodynamics, stratigraphy, tectonics and magmatism.展开更多
文摘The gravity and magnetic survey lines of about 13,500 km were carried out in the centraland northern parts of the South China Sea from 1977 to 1978. The results obtained showthat the Bouguer gravity and magnetic anomalies have a tendency to increase gradually theirvalues from the northern continental shelf, through the slope, to the central abyssal basin of theSouth China Sea. The change in free-air gravity anomaly values coincides to a certain degreewith the undulation of the sea-bottom topography. The primary factor determining regionalvariation of the Bouguer gravity anomayl values is the Moho depth. The main factor deter-mining the magnetic anomly values is the nature of the basement rock. The high magnetieand Bouguer gravity anomaly values observed in some fault basin areas are inferred to becaused by draping the basic and ultrabasic magma extruding along the faults on the basementof the metamorphic rock,or by intrusion of the same magma into the basement.
基金Supported by the National Natural Science Foundation of China(No.51379006 and No.51009106)the Program for New Century Excellent Talents in University of Ministry of Education of China(No.NCET-12-0404)the National Basic Research Program of China("973"Program,No.2013CB035903)
文摘Due to the complex nature of multi-source geological data, it is difficult to rebuild every geological structure through a single 3D modeling method. The multi-source data interpretation method put forward in this analysis is based on a database-driven pattern and focuses on the discrete and irregular features of geological data. The geological data from a variety of sources covering a range of accuracy, resolution, quantity and quality are classified and integrated according to their reliability and consistency for 3D modeling. The new interpolation-approximation fitting construction algorithm of geological surfaces with the non-uniform rational B-spline(NURBS) technique is then presented. The NURBS technique can retain the balance among the requirements for accuracy, surface continuity and data storage of geological structures. Finally, four alternative 3D modeling approaches are demonstrated with reference to some examples, which are selected according to the data quantity and accuracy specification. The proposed approaches offer flexible modeling patterns for different practical engineering demands.
文摘3-D geological modeling plays an increasingly important role in Petroleum Geology, Mining Geology and Engineering Geology. The complexity of geological conditions requires different modeling methods in different situations. This paper summarizes the general concept of geological modeling; compares the characteristics of borehole-based modeling, cross-section based modeling and multi- source interactive modeling; analyses key techniques in 3-D geological modeling; and highlights the main difficulties and directions of future studies.
文摘A magnetotelluric study was carried out in the Xuefeng mountain uplift belt and its western margins. A detailed investigation was made of the resistivity of the formations, and reliable data were obtained. The sedimentary cover and basement structure of the Xuefeng mountain area and the deep geological structure were analyzed in detail using magnetotelluric data from the twodimensional inversion of the resistivity profile data in combination with regional gravity and magnetic data. It was concluded that the tectonic movements were characterized by basement detachment, and north-south ramp.The study area can be divided into a southern uplift zone, a southern thrust-faulted zone, a central uplift zone, and a northern depression zone. This work has provided geophysical evidence that can be used in future studies of the tectonics and petroleum geology of this region.
文摘During 1960—1990, an extensive geological-geophysical investigation was carried out in the marine areas of China. According to the materials obtained, the 'Geological—Geophysical Serial Maps of the China Seas and the Adjacent Areas (1:2,000,000)' was compiled. In fact, it is a systematic summary of the geological and geophysical work of the China Seas in the past 30 years.In this paper, the author explains the guiding thought and methodology of the compilation of the serial maps, and then briefly discusses the characteristics of geophysical fields and geodynamics, stratigraphy, tectonics and magmatism.
