Clinical Observation of Gingko Biloba Extract Injection in Treating Early Diabetic Nephropathy

Objective. To observe the effect of Ginkgo biloba extract injection （GB） in treating early diabetic nephropathy （DN）. Methods. Sixty DN patients were divided into two groups, the treated group were treated by GB and Western medicine, and the control group were given Western medicine alone. The study lasted for 4 weeks. Fasting plasma glucose （FPG）, blood pressure, 24 h urinary albumin excretion （UAE）, endogenous creatinine clearance rate （Ccr）, blood lipids and hemorheology indices were examined before and after the study. Results. Compared with the control group, UAE were significantly decreased （P〈0. 01） ; Ccr, blood lipids and hemorheology indices were all improved after treatment in the treated group （ P〈 0.05 or P〈0.01）. But in FPG and blood pressure there was no significant change between the treated group and the control group （P〉0.05）. Conclusion. GB is effective in treating early DN through decreasing urinary albumin excretion rate, regulating blood lipids, improving renal function and hemorheology.

Study of the Reservoir Damage during Cyclic Injection and Extraction Process in the Hutubi Gas Storage

During the injection and extraction process in gas storage,cyclic loading stress is applied to the reservoir pore structure,affecting the capacity and service life of gas storage. To study the influence of cyclic injection and extraction on reservoir physical property,a finite-element model of reservoir elastoplastic damage under the effect of pore pressure is established based on elastoplastic mechanics and fatigue-damage mechanics. Considering the mechanical property of the Hutubi reservoir and the injection-extraction mode of gas storage,the finite-element model is used to study the pore pressure and porosity change,fault safety,and ground surface deformation. The results show that the change in pore pressure and porosity,the deformation of the Hutubi fault,as well as the uplift and sink of the grounds surface are controlled by the fatigue damage of the reservoir pore structure during the injection-extraction process. After a 6-year service life, the cumulative deformation of the reservoir pore reaches its limit,causing pore structure collapse and porosity decrease. As a result,storage capacity declines and the ground surface starts to sink. Through this study,the safety of the Hutubi gas storage is evaluated,and some suggestions for field operations are offered.

Large-scale physical simulation of injection and production of hot dry rock in Gonghe Basin,Qinghai Province,China

Based on the independently developed true triaxial multi-physical field large-scale physical simulation system of in-situ injection and production,we conducted physical simulation of long-term multi-well injection and production in the hot dry rocks of the Gonghe Basin,Qinghai Province,NW China.Through multi-well connectivity experiments,the spatial distribution characteristics of the natural fracture system in the rock samples and the connectivity between fracture and wellbore were clarified.The injection and production wells were selected to conduct the experiments,namely one injection well and two production wells,one injection well and one production well.The variation of several physical parameters in the production well was analyzed,such as flow rate,temperature,heat recovery rate and fluid recovery.The results show that under the combination of thermal shock and injection pressure,the fracture conductivity was enhanced,and the production temperature showed a downward trend.The larger the flow rate,the faster the decrease.When the local closed area of the fracture was gradually activated,new heat transfer areas were generated,resulting in a lower rate of increase or decrease in the mining temperature.The heat recovery rate was mainly controlled by the extraction flow rate and the temperature difference between injection and production fluid.As the conductivity of the leak-off channel increased,the fluid recovery of the production well rapidly decreased.The influence mechanisms of dominant channels and fluid leak-off on thermal recovery performance are different.The former limits the heat exchange area,while the latter affects the flow rate of the produced fluid.Both of them are important factors affecting the long-term and efficient development of hot dry rock.

Determination of resveratrol in red wine by solid phase extraction-flow injection chemiluminescence method

A sensitive flow injection chemiluminescence method has been developed for the detection of resveratrol in red wine based on the fact that resveratrol can greatly enhance chemiluminescence reaction between KMnO4 and HCHO in sulfuric acid medium. Analytes were pre-concentrated on solid sorbents （C18 solid-phase extraction cartridges）. Under the optimum conditions, the proposed method allows the measurement of resveratrol over the range of 1.32 × 10^-8 to 1.32 × 10^-5 mol/L with a detection limit of 3.30 ×10^-9 mol/L, and the relative standard deviation for 1.32 ×10^-5 mol/L resveratrol （n = 11） is 3.8%. This method has been successfully applied for the determination of the resveratrol in red wine. Furthermore, the possible reaction mechanism was also discussed.

Influence of Water Injection Fracturing on Crack Damage in Soft Coal and Application in Gas Extraction

In order to study the hypotonic and rheological particularity of “three soft” coal seam in west Henan, China, this paper explored the stress and damage characteristics of crack in coal under condition of water injection fracturing based on ABAQUS platform;The cohesive element in T-P damage evolution criterion was used to describe the approximately linear relationship between crack width and extending distance in soft coal. The simulation results show that stress evolution and crack damage in soft coal is a gradually developing process under condition of water injection fracturing. When the static pressure is 4 - 10 MPa, and the injection time is about 1 - 2 hours, the damage range of crack in soft coal can basically reach an ideal data of 80 - 100 m, and then greatly improve the hypotonic performance of “three soft” coal seam.

Calculation of Beam Intensity Distribution for the Neutral Beam Injection in EAST

Theoretical beam intensity distribution is derived for the neutral-beam-injection ion source with a multi-slot extraction in EAST. The beam intensity profile, both along and perpendicular to the injecting direction and the beam power deposition to the inner elements in the neutral beam injector （NBI） are evaluated. The results indicate that the transverse beam intensity is much higher than the longitudinal one. This study could provide information for the design of vacuum system, structure of inner elements and cooling system of the neutral beam injector in EAST.

Sequential injection spectrophotometric determination of nanomolar nitrite in seawater by on-line preconcentration with HLB cartridge

The unstable state of nitrite results in its very low concentration in seawater, which is below the limit of detection （LOD） of conventional techniques of analysis. Some sensitivity-enhanced methods have been proposed for the determination of nitrite at nanomolar level to illustrate the role of nitrite in the marine nitrogen cycle. However, most of previous reports are not widely accepted, because of their complexity and cost equipment or intensive labor requirement. In this study, a simple automatic system for the determination of nanomolar level nitrite using on-line preconcentration with spectrophotometric detection was described..An Oasis HLB cartridge was adopted to quantitatively enrich the pink-colored azo compound, formed from nitrite via Griess reaction. The cartridge was rinsed with water and ethanol （volume fraction is 55%, the same below）, in turn, then eluted by an eluent containing 50% ethanol and 0.25 M（mol/dm^3） H2SO4, and determined at 543 nm with a 2 cm path-length flow cell. Under the optimized experimental conditions, the calibration curve showed a good linearity in the range of 1.4 85.7 aM, and the LOD （3a） was estimated to be 0.5 nM. The relative standard deviations of 7 measurements were 4.0% and 1.0% for the samples spiked at 7.1 and 28.6 nM, respectively. The recoveries for the different natural water samples were between 92.2%-108.4%. Each HLB cartridge could be reused for at least 50 times. As compared with other SPE methods, the advantages of this method included the free of interference from salinity variation and less sample consuming. The results of the application of the proposed method to natural water showed good agreement with liquid waveguide capillary cell detection method.

Heat-fluid-solid coupling model for gas-bearing coal seam and numerical modeling on gas drainage promotion by heat injection

Improving the absorbed gas to active desorption and seepage and delaying gas drainage attenuation are considered as key methods for increasing drainage efficiency and gas output.According to the solid mechanics theory,the nonlinear Darcy seepage theory and thermodynamics,the heat-fluid-solid coupling model for gassy coal has been improved.The numerical model was founded from the improved multi-field coupling model by COMSOL Multiphysics and gas drainage by borehole down the coal seam enhanced by heat injection was modelled.The results show that the heatfluid-solid model with adsorption effects for gassy coal was well simulated by the improved multi-field model.The mechanism of coal seam gas desorption seepage under the combined action of temperature,stress and adsorption can be well described.Gas desorption and seepage can be enhanced by heat injection into coal seams.The gas drainage rate was directly proportional to the temperature of injected heat in the scope of 30-150 ℃ and increasing in the whole modelleddrainage process (0-1000 d).The increased level was maximum in the initial drainage time and decreasing gradually along with drainage time.The increasing ratio of drainage rate was maximum when the temperature raised from 30 to 60 ℃.Although the drainage rate would increase along with increasing temperature,when exceeding 60 ℃,the increasing ratio of drainage rate with rising temperature would decrease.Gas drainage promotion was more effective in coal seams with lower permeability than with higher permeability.The coal seam temperature in a 5 m distance surrounding the heat injection borehole would rise to around 60 ℃ in 3 months.That was much less than the time of gas drainage in the coal mines in sites with low permeability coal seams.Therefore,it is valuable and feasible to inject heat into coal seams to promote gas drainage,and this has strong feasibility for coal seams with low permeability which are widespread in China.

Treatment of 482 Cases of Cervical Spondylopathy by Combining Point-injection and Needle-warming via Moxibustion

From January 1993 to December 1996, we treated 482 cases of cervical spondylopathy with a combined method of point-injection and needle-warming via moxibustion. Except for the cases of sympathetic nerve type and spinal cord type, the combined method was superior to traction therapy in the control group and reported as follows.Clinical DataThe Criteria of Diagnosis and Curative Effect in TCM issued by the State Administrative Bureau of TCM and Pharmacy in 1994 was adopted for the enrollment of patients of cervical spondylopathy and the pathological typing. Only the patients who had completed the treatment and with complete records were collected for analysis.

Experimental study of water effects on gas desorption during highpressure water injection

For the question of applying high-pressure water injection to increase gas extraction efficiency by increasing the permeability of water to drive gas action, an independently designed gas desorption experimental measuring device was used under the condition of external solution invasion. The law of water effect on gas desorption was obtained after water invasion through experiment for the first time. The results show that water＇s later invasion not only can make the quantity of gas dcsorp- tion greatly reduced, but also can make gas desorption end early. Therefore, when evaluating the applications of high-pressure water injection to increase gas extraction efficiency, we should take water damaging effects on gas desorption into account.

Twenty-eight Cases of Neuritis of Lateral Cutaneous Nerve of Thigh Treated by Acupuncture and Point-Injection

Neuritis of lateral cutaneous nerve of thigh, also called meralgia paresthetica, is a commonly encountered disease in clinical practice. The author has treated 28 cases of meralgia paresthetica since 1996 by acupuncture plus point-injection with satisfactory results. A report follows.Clinical Data Among the 28 cases, 13 were male and 15 female. Their age ranged from 24 to 72 years, most of the patients being 35 to 50 years; the duration of illness varied from one month to ten years and 6 cases were affected on left side, 8 cases on right side and 14 cases on both sides.

Geothermal extraction performance in fractured granite from Gonghe Basin,Qinghai province,China:Long-term injection and production experiment

The efficient exploitation of geothermal energy through enhanced geothermal systems(EGS)has been a relevant topic for hot dry rock(HDR)geothermal resources.When cryogenic fluid is injected into a thermal reservoir,improving heat exchange efficiency is key to achieving the optimal exploitation of HDR.In this paper,granite outcrops from Gonghe Basin were used as the testing sample.The natural fractures in the granite samples were relatively well developed.To simulate long-term injection and production from multi-wells in situ,physical ex-periments were performed in a newly-developed,in-house large-scale true triaxial experimental system.Geothermal extraction performance of an HDR was simulated for long-term injection and production operations.Simultaneously,the mode of one-injection and multiple-production wells was represented.In the paper,the ef-fects of the production-injection well spacing,the number of production wells and the injection rate on the production temperature and flow rate are discussed.The results show that,during long-term injection and pro-duction,there are two stages of production temperature variation,namely stabilization and attenuation.When the number of the production wells is increased,the heat extraction efficiency is accelerated.Moreover,competitive diversion of fluid among fractures occurred due to different conductivities.Furthermore,under different pro-duction modes,the production flow rate contributed differently to the heat extraction.Finally,the effect of the production-injection wells spacing on the heat exchange performance was analyzed;this is mainly reflected in the change of the effective heat exchange area between the rock and the injected fluid.The results emphasize the importance of designing an appropriate production mode and optimizing the injection-production parameters to ensure efficient HDR exploitation.

Solid Phase Extraction Chemiluminescence Determination of Methamidaphos on Vegetables

The determination of the methamidaphos pesticide residue on vegetables with a simple solid phase extract（SPE） flow injection（FI） -chemiluminescence（CL） method is described. The method is based on the enhancing effect of methamidaphos on the CL reaction of luminol with hydrogen peroxide in an alkaline solution. Under the optimal conditions, the CL intensity is linear to the methamidaphos mass concentration in a range of 0. 2-13μg/mL （ r= 0. 9992）. The detection limit（3σ） is 0. 047μg/mL. The relative standard deviations for the analysis of three samples are 1.8%, 2.5% and 3.7% （ n = 5 ）, respectively. The recovery is in a range of 90%-109% by the method. In this work, this method was successfully applied to the determination of the methamidaphos residue on some vegetable samples.

Outcome of repeated micro-surgical testicular sperm extraction in patients with non-obstructive azoospermia

Aim： To evaluate the outcome of repetitive micro-surgical testicular sperm extraction （mTESE） attempts in non-obstructive azoospermia （NOA） cases, in relation to patients＇ initial testicular histology results. Methods： A total of 68 patients with NOA in whom mTESE had been performed in previous intracytoplasmic sperm injection （ICSI） attempts were reviewed. Results： Among the 68 patients with NOA, the first mTESE yielded mature sperm for ICSI in 44 （64%） （Sp^＋）, and failed in the remaining 24 （36%） （Sp^-）. Following their first trial, 24 patients decided to undergo a second mTESE. Of these 24 patients, no spermatozoa were obtained in 5 patients, and Sp^＋ but no fertilization/pregnancy were achieved in 19. In these 24 cases, mTESE was successively repeated for two （n = 24）, three （n = 4） and four （n = 1） times. The second attempt yielded mature sperm in 3/5 patients from the Sp group and 16/19 patients from the Sp^＋ group. At the third and fourth trials, 4/4 and 1/1 of the original Sp^＋ patients were Sp^＋ again, respectively. Distribution of main testicular histology included Sertoli cell-only syndrome （16%）, maturation arrest （22%）, hypospermatogenesis （21%） and focal spermatogenesis （41%）. Overall, in repetitive mTESE, 24/29 （82%） of the attempts were finally Sp^＋. Conclusion： Repeated mTESE in patients with NOA is a feasible option, yielding considerably high sperm recovery rate. In patients with NOA, mTESE may safely be repeated one or more times to increase sperm retrieval rate, as well as to increase the chance of retrieving fresh spermatozoa to enable ICSI.

HEPS增强器凸轨磁铁脉冲电源的设计与实现

高能同步辐射光源(HEPS)是国内首台第四代同步辐射光源,包括一个储存环、一个增强器以及一个直线加速器。作为典型的低发射度储存环(LER),其动力学孔径远小于物理孔径,对此选择了一种新颖的在轴置换注入方案。其中,增强器负责实现束流从500 MeV到6 GeV的升能。为了降低增强器引出冲击磁铁的冲击强度,在引出环节之前使用4台凸轨磁铁来辅助冲击磁铁完成这一动作。凸轨磁铁磁场波形要求底宽小于1 ms的半正弦波。根据仿真以及测试结果,采用绝缘栅双极型晶体管(IGBT)串联快恢复二极管的经典LC谐振电路拓扑。此外,设计了能量回收支路,来降低电容在充电过程中功率损耗以及对输出脉冲电流波形的影响。目前,已完成脉冲电源样机的研制与测试,各项结果表明,该脉冲电源能够满足高能光源增强器高能引出系统的各项要求。

重复注气压降法煤层渗透率模型与原位测试研究

煤层渗透率作为衡量瓦斯渗流与抽采难易程度的重要指标,对其进行准确测定具有重要意义。针对现有方法计算渗透率测试周期长、结果不稳定、模型不完善等问题,研究煤层渗透率的快速准确测定方法及相应的计算模型。基于煤层中气体径向不稳定流控制方程,结合不同压差下气体在煤层中的体积流量方程,建立可利用全区间压降数据测定煤层渗透率的注气压降计算模型。应用COMSOL数值模拟软件的达西渗流模块对模型进行求解,针对现场工程设计中可对压降曲线产生影响的测压气室长度进行单变量处理,根据模拟结果分析钻孔的测压气室长度可设计为2.0 m。根据数值模拟结果进行现场布置,搭建井下重复注气压降试验系统,结合煤层瓦斯赋存条件和巷道条件施工两组穿层钻孔,对2个测点分别注入两次高于煤层瓦斯压力的补偿气体进行渗透率原位测试,测试周期分别约为6 d和17 d,第2轮测试的注气压力高于第1轮。结合理论推导验证了注气压降过程中煤层瓦斯的雷诺数均处于线性达西渗流段,瓦斯在煤层中的渗流符合达西定律,满足计算模型的假设。与传统煤层渗透率计算方法进行了比较,结果表明:本方法和径向流量法的计算结果基本一致,可以满足实际工程需要。重复注气压降法的测试结果稳定可靠,具备快速测定的优点。

Holistic quality evaluation of Panax notoginseng extract and injection using an UPLC-QTOF-MS^E based metabolomics approach

In the present study, we established an UPLC-QTOF-MSE based metabolomic approach in order to evaluate the holistic qualities and compare the quality difference by finding characteristic components of Panax notoginseng extracts （PNE） and Xuesaitong （XST） injection samples from different manufacturers. The data were processed through unsupervised principal component analysis （PCA） and supervised orthogonal partial least squared discrimination analysis （OPLS-DA） to compare the quality differences. Two-dimensional PCA score plots showed a tendency to separate the XST injections and extracts, and most XST injection samples were clearly clustered into two groups. Especially, the injections from He and YB companies were distinguished into two groups. In addition, only injection samples of Hu company were near the cluster of PNE. To explore the potential chemical components contributing most to the differences between XST injection samples from different manufacturers and PNE, an S-plot was constructed following the OPLS-DA. Ginsenoside Rd, ginsenoside Rgl, ginsenoside Re, ginsenoside Rbl, 20（S）-ginsenoside Rhl, gypenoside VII, ginsenoside Rg2, ginsenoside Rh4, ginsenoside Rkl or Rgs, notoginsenoside Fc, 20（R）-ginsenoside Rg3, ginsenoside F2 and protopanaxadiol were recognized as characteristic chemical markers that contributed most to reflect the difference between XST injections and PNE. Ginsenoside Rd, ginsenoside Rgl, ginsenoside Re, ginsenoside Rbl and gypenoside VII were revealed as index components contributing most to the differences of PNE and XST injections, and quantitative analysis of these components could ensure the consistent quality of XST injections. Based on the fact that the injections should be standardized with the characteristic components as quality control chemical markers, it is most important to keep the quality of extracts of raw materials stable and reliable.

基于两堵两注通管直连技术的瓦斯抽采研究

为解决“两堵一注”封孔工艺及传统连管方式在孟津煤矿实施存在的弊端,提出了“两堵两注”通管直连技术,提高了瓦斯抽采浓度,延长了瓦斯抽采时间。为此,采用巷道松动圈理论分析了该矿合适的封孔长度;采用离散元数值模拟方法建立巷道模型,分析了巷道周围应力分布,确定了钻孔的最佳封孔深度;开展了“两堵两注”封孔地面实验和通管直连技术现场实验。结果表明:孟津煤矿二1煤层工作面顺层瓦斯抽采钻孔封孔长度至少为6.75 m;该矿12070工作面穿层钻孔最佳封孔深度为15~30 m;“两堵两注”技术能有效对抽采钻孔进行封堵;通管直连技术在现场应用中大幅度提高了瓦斯抽采浓度,延长了瓦斯抽采时间。

古龙页岩油注CO_(2)/烃类气相态特征及多周期作用机制

基于PVT实验和多周期注CO_(2)/烃类气采油物理模拟实验,结合相态模拟计算揭示古龙页岩油注气前后的高压物性和流体类型演化规律,评价多周期注气作用下的原油采出效果,分析多组分间的抽提传质机理。实验结果表明:古龙页岩油属于轻质弱挥发性油藏,当压力降低至泡点压力以下时,原油的黏度和密度快速增大,原油物性急剧变差。因此,对于成熟度较高的页岩油,利用注气补充地层能量并维持良好的原油物性是提高采收率的关键,且注CO_(2)对原油的膨胀、降黏效果均优于注烃类气。此外,注CO_(2)/烃类气可使古龙页岩油由弱挥发性油藏向挥发性油藏转变,先注烃类气再注CO_(2)使得古龙页岩油呈现出由挥发性油藏进一步向凝析气藏过渡的趋势。古龙页岩油脱气后的溶解气驱效果更优,产出油相呈现连续的泡沫油状态。注CO_(2)/烃类气可为地层原油补充溶解气和弹性能量,注CO_(2)对原油中间烃组分(C_(5)—C_(10))和重烃组分(C_(11)+)的抽提效果均较好,注烃类气对原油中间烃组分的抽提效果更好。

页岩油藏提高采收率技术现状、瓶颈及对策

介绍了页岩油的储量分布、成因及赋存机理,详细概述了页岩油早期勘探、储层改造及后期提采等不同阶段的开发现状。在此基础上,着重综述了当前国内外页岩油藏提高采收率主体技术的应用现状及进展,深入分析了不同页岩油提采技术的优势与不足,同时给出了针对理论认识、技术及经济壁垒的相应策略,最后从不同角度入手,展望了今后页岩EOR的发展前景。