GNSS spoofing detection for single antenna receivers via CNR variation monitoring

In this paper,a method for spoofing detection based on the variation of the signal’s carrier-to-noise ratio(CNR)is proposed.This method leverages the directionality of the antenna to induce varying gain changes in the signals across different incident directions,resulting in distinct CNR variations for each signal.A model is developed to calculate the variation value of the signal CNR based on the antenna gain pattern.This model enables the differentiation of the variation values of the CNR for authentic satellite signals and spoofing signals,thereby facilitating spoofing detection.The proposed method is capable of detecting spoofing signals with power and CNR similar to those of authentic satellite signals.The accuracy of the signal CNR variation value calculation model and the effectiveness of the spoofing detection method are verified through a series of experiments.In addition,the proposed spoofing detection method works not only for a single spoofing source but also for distributed spoofing sources.

Design and Construction of Automatic Monitoring System for Open-pit Coal Mine Slopes

[Objectives]To monitor the stability of open-pit coal mine slopes in real time and ensure the safety of coal mine production.[Methods]The automatic monitoring system of coal mine slope was explored in depth,and the core functions of the system were designed comprehensively.According to the design function of the automatic monitoring system,the slope automatic monitoring system was constructed.Besides,in accordance with the actual situation of the slope,the monitoring frequency of slopes was set scientifically,and the key indicators such as rainfall,deep displacement and surface displacement of the slopes were monitored in an all-round and multi-angle way.[Results]During the monitoring period,the overall condition of the slope remained good,and no landslides or other geological disasters occurred.At the same time,the overall rainfall in the slope area remained low.In terms of monitoring data,the horizontal displacement and settlement of the slopes increased first and then tended to be stable.Specifically,the maximum horizontal displacement during the monitoring period was 22.74 mm,while the maximum settlement was 18.65 mm.[Conclusions]The automatic slope monitoring system has obtained remarkable achievements in practical application.It not only improves the accuracy and efficiency of slope stability monitoring,but also provides valuable reference experience for similar projects.

Anti-Jamming Algorithm Based on Spatial Blind Search for Global Navigation Satellite System Receiver

A novel subspace projection anti-jamming algorithm based on spatial blind search is proposed,which uses multiple single-constrained subspace projection parallel filters.If the direction of arrival(DOA)of a satellite signal is unknown,the traditional subspace projection anti-jamming algorithm cannot form the correct beam pointing.To overcome the problem of the traditional subspace projection algorithm,multiple single-constrained subspace projection parallel filters are used.Every single-constrained anti-jamming subspace projection algorithm obtains the optimal weight vector by searching the DOA of the satellite signal and uses the output of cross correlation as a decision criterion.Test results show that the algorithm can suppress the jamming effectively,and generate high gain toward the desired signal.The research provides a new idea for the engineering implementation of a multi-beam anti-jamming algorithm based on subspace projection.

Evaluation of global navigation satellite system spoofing efficacy

The spoofing capability of Global Navigation Satellite System(GNSS)represents an important confrontational capability for navigation security,and the success of planned missions may depend on the effective evaluation of spoofing capability.However,current evaluation systems face challenges arising from the irrationality of previous weighting methods,inapplicability of the conventional multi-attribute decision-making method and uncertainty existing in evaluation.To solve these difficulties,considering the validity of the obtained results,an evaluation method based on the game aggregated weight model and a joint approach involving the grey relational analysis and technique for order preference by similarity to an ideal solution(GRA-TOPSIS)are firstly proposed to determine the optimal scheme.Static and dynamic evaluation results under different schemes are then obtained via a fuzzy comprehensive assessment and an improved dynamic game method,to prioritize the deceptive efficacy of the equipment accurately and make pointed improvement for its core performance.The use of judging indicators,including Spearman rank correlation coefficient and so on,combined with obtained evaluation results,demonstrates the superiority of the proposed method and the optimal scheme by the horizontal comparison of different methods and vertical comparison of evaluation results.Finally,the results of field measurements and simulation tests show that the proposed method can better overcome the difficulties of existing methods and realize the effective evaluation.

The Performance Evaluation of the Integration of Inertial Navigation System and Global Navigation Satellite System with Analytic Constraints

The integration of GNSS （Global Navigation Satellite System） and INS （Inertial Navigation System） using IMU （Inertial Measurement Unit） is now widely used for MMS （Mobile Mapping System） and navigation applications to seamlessly determine position, velocity and attitude of the mobile platform. With low cost, small size, ligh weight and low power consumtion, the MEMS （Micro-Electro-Mechanical System） IMU and low cost GPS （Global Positioning System） receivers are now the trend in research and using for many applications. However, researchs in the literature indicated that the the performance of the low cost INS/GPS systems is still poor, particularly, in case of GNSS-noise environment. To overcome this problem, this research applies analytic contrains including non-holonomic constraint and zero velocity update in the data fusion engine such as Extended Kalman Filter to improve the performance of the system. The benefit of the proposed method will be demonstrated through experiments and data analysis.

Detection method of forward-scatter signal based on Rényi entropy

The application scope of the forward scatter radar(FSR)based on the Global Navigation Satellite System(GNSS)can be expanded by improving the detection capability.Firstly,the forward-scatter signal model when the target crosses the baseline is constructed.Then,the detection method of the for-ward-scatter signal based on the Rényi entropy of time-fre-quency distribution is proposed and the detection performance with different time-frequency distributions is compared.Simula-tion results show that the method based on the smooth pseudo Wigner-Ville distribution(SPWVD)can achieve the best perfor-mance.Next,combined with the geometry of FSR,the influence on detection performance of the relative distance between the target and the baseline is analyzed.Finally,the proposed method is validated by the anechoic chamber measurements and the results show that the detection ability has a 10 dB improvement compared with the common constant false alarm rate(CFAR)detection.

REVISITING THE DOPPLER FILTER OF LEO SATELLITE GNSS RECEIVERS FOR PRECISE VELOCITY ESTIMATION

The theoretical aspects of the precise velocity determination of Low Earth Orbit (LEO) satellites'on board Global Navigation Satellite Systems (GNSS) receivers are derived. It shows that the receiver's Phase Lock Loop (PLL) is required to feature extremely small group delay within its low frequency band, which is in contrast to existing work that proposed wide band linear phase filters. Following this theory, a Finite Impulse Response (FIR) filter is proposed. To corroborate, the proposed FIR filter and an Infinite Impulse Response (IIR) filter lately proposed in literals are implemented in a LEO satellite onboard GNSS receiver. Tests are conducted using a third party commercial GPS signal generator. The results show that the GNSS receiver with the proposed FIR achieves 11 mm/s R.M.S precision, while the GNSS receiver with the IIR filter has a filter-caused velocity error that can not be ignored for space borne GNSS receivers.

Compact and broadband circularly polarized ring antenna with wide beam-width for multiple global navigation satellite systems

A compact and broadband circularly polarized （CP） annular ring antenna with wide beam-width is proposed for multiple global navigation satellite systems （GNSS） in the L1 band. The annular ring is excited by two modified L-probes with quadrature phase difference. It has a 36.3% 10-dB return loss bandwidth and a 13% 3-dB axial ratio bandwidth, because of the orthogonal L-probes with 90° phase difference. The measured peak gain of the antenna is 3.9 dBic. It can detect the satellites at lower elevation as its half power beam-width （HPBW） is 113° in both the x-z and y-z planes, achieving a cross-polarization level of larger than 25 dB. Noticeably, the antenna achieves 89% size reduction compared with the conventional half wavelength patch antennas. It can be used in hand-held navigation devices of multiple GNSS such as COMPASS, Galileo, GPS and GLONASS.

Jamming and spoofing interferences suppression technique for satellite navigation receiver

A satellite navigation receiver that can suppress jamming interference and spoofing interference simuhaneously is designed in this paper. An anti-jamming improved constrained spacial adaptive processing algorithm in signal processing and an anti-spoofing M-estimator based extended Kalman filter algorithm in information processing are proposed respectively. Simulations of the integral designed anti-interferences satellite navigation receiver demonstrate that the designed anti-interferences receiver can suppress jamming signals efficiently （ above 40 dB） and ensure the normal reception of satellite signals while satellite signals and jamming signals have the similar direction of arrival （ almost 10° ）. The designed anti-interference receiver can effectively eliminate the influence of spoofing signals on the navigation solution accuracy and maintain high accuracy of position and velocity estimation, which improves the anti-jamming and anti-spoofing capability of the satellite navigation receiver.

Fast fine acquisition algorithm of GPS receiver aided by INS information

Acquisition time of global position system （GPS） receiver, which is the main factor contributes to time to first fix （TTFF）, can be shortened by estimating the Doppler frequency shift through external inertial navigation system （INS） information and almanac data and reducing the searching area. The traditional fast acquisition is analyzed, the fast acquisition of the GPS receiver aided is presented by INS information, and the signal is fine captured by spectrum zooming. Then the algorithm is simulated by sampled GPS intermediate frequency （IF） signal and the result verifies that this acquisition can dramatically improve the capability of GPS receiver and reduce its acquisition time.

Calibration of GNSS positioning receivers

Nowadays global navigation satellite system(GNSS)receivers are the primary tool not only for precision surveying but also for geodesy,geophysics and many other industrial applications worldwide.The only way to assure the accuracy,universality and longevity of GNSS measurements is by calibration of its receivers.The parameters affecting the calibration accuracy of a single GNSS receiver are discussed in this paper.And a geodetic basepoint is established according to previous empirical studies to serve as a reference for calibration.Additionally,the traceability to the systeme international(SI)unit of such kind of calibrations is discussed.Stability of the base point is also verified through long-term measurements over three years.Eventually,a calibration of a sample single GNSS receiver is performed and the uncertainty budget is derived.

Localization of Small Mobile Robot by Low-Cost GPS Receiver

This article deals with a problem of the robot localization in the outdoor environment by using the GPS （global positioning system） data. In order to navigate the robot, it is necessary to transform the global position into the local map in the form of two-dimensional Cartesian coordinate system. The transformation is based on the model of the Earth-WGS 84 reference ellipsoid. The aim of this article is to experimentally evaluate a set of low-cost GPS receivers applicable as position sensors for small outdoor mobile robots. The evaluation is based on series of measurements executed in different times and places. The measured data is processed by given procedure and acquired positions are transformed into the local coordinate system. Accordingly the accuracy of the measured positions is statistically evaluated. The evaluation of used GPS receivers is done by comparison with data acquired by high-end geodetic GPS system Leica 1200, which is used as a reference GPS system.

Evaluation of surface temperature and pressure derived from MERRA-2 and ERA5 reanalysis datasets and their applications in hourly GNSS precipitable water vapor retrieval over China

Temperature and pressure play key roles in Global Navigation Satellite System(GNSS) precipitable water vapor(PWV) retrieval. The National Aeronautics and Space Administration(NASA) and European Center for Medium-Range Weather Forecasts(ECMWF) have released their latest reanalysis product: the modern-era retrospective analysis for research and applications, version 2(MERRA-2) and the fifthgeneration ECMWF reanalysis(ERA5), respectively. Based on the reanalysis data, we evaluate and analyze the accuracy of the surface temperature and pressure products in China using the the measured temperature and pressure data from 609 ground meteorological stations in 2017 as reference values.Then the accuracy of the two datasets and their performances in estimating GNSS PWV are analyzed. The PWV derived from the pressure and temperature products of ERA5 and MERRA-2 has high accuracy. The annual average biases of pressure and temperature for ERA5 are-0.07 hPa and 0.45 K, with the root mean square error(RMSE) of 0.95 hPa and 2.04 K, respectively. The annual average biases of pressure and temperature for MERRA-2 are-0.01 hPa and 0.38 K, with the RMSE of 1.08 h Pa and 2.66 K, respectively.The accuracy of ERA5 is slightly higher than that of MERRA-2. The two reanalysis data show negative biases in most regions of China, with the highest to lowest accuracy in the following order: the south,north, northwest, and Tibet Plateau. Comparing the GNSS PWV calculated using MERRA-2(GNSS MERRA-2 PWV) and ERA5(GNSS ERA5 PWV) with the radiosonde-derived PWV from 48 co-located GNSS stations and the measured PWV of the co-location radiosonde stations, it is found that the accuracy of GNSS ERA5 PWV is better than that of GNSS MERRA-2 PWV. These results show the different applicability of surface temperature and pressure products from MERRA-2 and ERA5 data, indicating that both have important applications in meteorological research and GNSS water vapor monitoring in China.

THE APPLICATION OF SATELLITE POSITIONING TECHNOLOGY AND ITS INDUSTRIALIZATION IN CHINA

Satellite positioning technology has been widely used in all kinds of military and civil land, marine, space and aeronautical target positioning tasks, naviga tion activities and accurate surveying measurements since 90 s in the last cen tury due to its advantage in providing all-weather, real-time, three dimensional and high precision positioning information, as well as speed and accurate timing information. By now, it has already formed a new hi-tech industry basically.This paper briefly reviews the development of the global satellite positioning and navigation technologies including the basic information of China's "Plough navigation system", introduces the history of satellite positioning technology and its major application fields as well as the status quo of this being industri alized trade in China, gives an account of the writers' vision for the application and prospect of the satellite positioning technologies in China, and approaches the tactics and stresses of the satellite positioning technology's application and its industrialization future in China.

Simulator of GNSS signals for testing of space objects receivers in the earth conditions

A technique for testing space object receivers using global navigation satellite system （GNSS） signal simulator of the navigation field is proposed. Its structure consists of two blocks which allow synthesizing the scenario of reciprocal displacement of the receiver relative to navigation satellites and their signals. In the first block, according to the known coordinates of the receiver which are specified in tabular form or analytically, the distances between the receiver and the navigation satellites are calculated as well as their relative velocities. According to these data, the second block synthesizes the signals of navigational travelers with the specified characteristics which are transmitted via the air or cable with a given attenuation to the receiver. This allows testing on the earth receivers for airplanes and space objects under different scenarios of their movement, which not only reduces the risk of problems during the flight, but also avoids significant economic costs. Based on real data obtained by approaching two spacecraft using a simulator, the receiver was tested, which shows the promise of the proposed technology.

Spatio Temporal Tourism Tracking System Based on Adaptive Convolutional Neural Network

Technological developments create a lot of impacts in the tourism industry.Emerging big data technologies and programs generate opportunities to enhance the strategy and results for transport security.However,there is a difference between technological advances and their integration into the methods of tourism study.The rising popularity of Freycinet National Park led to a master plan that would not address cultural and environmental issues.This study addresses the gap by using a synthesized application(app)for demographic surveys and Global Navigation Satellite System(GNSS)technology to implement research processes.This article focuses on managing visitors within the famous Freycinet National Park.Extremely comprehensive structured data were analyzed in three phases,(1)identifying groups of visitors who are more likely to use the walking trails,(2)those who are more and less likely to visit during/peak crowding times,and(3)finally creating an integrated Spatio-temporal dependency model via a machine-based learning system for real-time activity.This research examines innovative techniques that can offer energy resources to managers and tourism agencies,especially in detecting,measuring,and potentially relieving crowding and over-tourism.

Progress of Geodesy Related Ionosphere from Chinese Scientists in the Period of 2019—2023

The ionosphere is the ionized part of the upper atmosphere of the Earth,which plays an important role in atmospheric electricity and forms the inner edge of the magnetosphere.It influences radio propagation significantly,such as the Global Navigation Satellite System(GNSS).Meanwhile,the GNSS is also an essential technique for sensing the variation of ionosphere.During the years of 2019—2023,a large number of Chinese geodesy scientists devoted much efforts to the geodesy related ionosphere.Due to the very limited length,the achievements are carried out from the following six aspects,including:①The ionospheric correction models for BDS and BDSBAS;②Real-time global ionospheric monitoring and modeling;③The ionospheric 2D and 3D modeling based on GNSS and LEO satellites;④The ionospheric prediction based on artificial intelligence;⑤The monitoring and mitigation of ionospheric disturbances for GNSS users;⑥The ionospheric related data products and classical applications.

Study on key technologies of GNSS-based train state perception for traincentric railway signaling

The application of Global Navigation Satellite Systems(GNSSs)in the intelligent railway systems is rapidly developing all over the world.With the GNSs-based train positioning and moving state perception,the autonomy and flexibility of a novel train control system can be greatly enhanced over the existing solutions relying on the track-side facilities.Considering the safety critical features of the railway signaling applications,the GNSS stand-alone mode may not be sufficient to satisfy the practical requirements.In this paper,the key technologies for applying GNSS in novel train-centric railway signaling systems are investigated,including the multi-sensor data fusion,Virtual Balise(VB)capturing and messaging,train integrity monitoring and system performance evaluation.According to the practical characteristics of the novel train control system under the moving block mode,the details of the key technologies are introduced.Field demonstration results of a novel train control system using the presented technologies under the practical railway operation conditions are presented to illustrate the achievable performance feature of autonomous train state perception using BeiDou Navigation Satellite System(BDS)and related solutions.It reveals the great potentials of these key technologies in the next generation train control system and other GNSS-based railway implementations.

Status of UnDifferenced and Uncombined GNSS Data Processing Activities in China

With the continued development of multiple Global Navigation Satellite Systems(GNSS)and the emergence of various frequencies,UnDifferenced and UnCombined(UDUC)data processing has become an increasingly attractive option.In this contribution,we provide an overview of the current status of UDUC GNSS data processing activities in China.These activities encompass the formulation of Precise Point Positioning(PPP)models and PPP-Real-Time Kinematic(PPP-RTK)models for processing single-station and multi-station GNSS data,respectively.Regarding single-station data processing,we discuss the advancements in PPP models,particularly the extension from a single system to multiple systems,and from dual frequencies to single and multiple frequencies.Additionally,we introduce the modified PPP model,which accounts for the time variation of receiver code biases,a departure from the conventional PPP model that typically assumes these biases to be time-constant.In the realm of multi-station PPP-RTK data processing,we introduce the ionosphere-weighted PPP-RTK model,which enhances the model strength by considering the spatial correlation of ionospheric delays.We also review the phase-only PPP-RTK model,designed to mitigate the impact of unmodelled code-related errors.Furthermore,we explore GLONASS PPP-RTK,achieved through the application of the integer-estimable model.For large-scale network data processing,we introduce the all-in-view PPP-RTK model,which alleviates the strict common-view requirement at all receivers.Moreover,we present the decentralized PPP-RTK data processing strategy,designed to improve computational efficiency.Overall,this work highlights the various advancements in UDUC GNSS data processing,providing insights into the state-of-the-art techniques employed in China to achieve precise GNSS applications.

GNSS线极化天线干涉信号反演土壤湿度算法测试

利用全球导航卫星系统干涉信号(GNSS-IR)测量土壤湿度已成为热门的研究课题。搭载低成本线性极化天线的智能手机可以方便快捷采集干涉信号信噪比(SNR)。分别仿真垂直和水平线性极化天线采集的GNSS干涉信号,给出2种极化方式下干涉信号SNR波形和反射率随卫星高度角变化的结果。对于垂直极化分量,电磁波会在入射角65°~85°左右时发生全透射,导致干涉信号振荡效果消失,而水平极化不存在该现象。同时,分别仿真右旋圆极化(RHCP)直射和左旋圆极化(LHCP)反射天线采集的GNSS信号,并计算直反射信号的幅值比。在仿真基础上分别利用不同极化天线进行实验,结果表明:采用线性极化天线采集的GNSS干涉信号振荡效果几乎不受卫星高度角的限制,可以为土壤湿度反演提供更多的有效数据,并且反演得到的土壤湿度与同位数据具有良好的一致性,两者的相关性达到0.95。使用搭载圆极化天线的双通道接收机采集北斗系统卫星数据进行对比,相关性达到0.91。对于不同的设备,智能手机采集的GNSS数据占用空间相对比于双通道接收机降低1%,且反演结果相关性接近,由于干涉信号提取直反射信号需要一定的振荡周期,故反演结果的时间分辨率要低于双通道接收机。