Research status of carbonaceous matter in carbonaceous gold ores and bio-oxidation pretreatment

Carbonaceous gold mines are important refractory gold ores. The previous results demonstrate that the carbonaceous matter is mainly composed of elemental carbon, organic acid and hydrocarbons. The dissolved aurocyanide complex is robbed by adsorption of carbonaceous matter, which is similar to activated carbon in cyanide leaching of gold. The pretreatment methods of carbonaceous gold ores were introduced, including high temperature roasting, bio-oxidation, chemical oxidation, competitive adsorption, barrier inhibition and microwave roasting. Recently, bio-oxidation was developed rapidly due to its advantages such as mild conditions, simple processes, low energy consumption and friendly environment. The known microorganisms related with bio-oxidation pretreatment mainly are chemolithotroph bacteria such as Thiobacillus ferrooxidans, Thiobacillus thiooxidans and Leptospirillum ferrooxidans. The researches on decomposing and passivating carbonaceous matter were commenced by Phanerochaete chrysosporium, Pseudomonadaceae and Streptomyces setonii. Finally, the main problems were analyzed and the application prospect of this technique was looked forward.

Bioleaching of zinc from gold ores using Acidithiobacillus ferrooxidans

The present work investigated microbial leaching of zinc from ore using Acidithiobacillus ferrooxidans （ATCC 14859）. The ore samples, consisted of 13wt% zinc, were obtained from a gold mine in north-eastern Thailand. A shake flask study was performed on the ore samples using a rotary shaker under the following fixed conditions （250 r·min^-1, 30℃ for 16 d）. The influence of various conditions, namely medium type （with and without iron）, particle ore size （〈20, 20-40, 40-60, 60-100, and 〉100 mesh）, ore density （20 kg·m^-3, 50 kg·m^-3, and 100 kg·m^-3）, and pH of the medium （2, 2.5, 2.8, and 3）, were investigated. The microbial leaching was assessed by determining the concentration of zinc in the medium and compared with the initial sample concentration. The results show that Acidithiobacillus ferrooxidans can successfully leach zinc by as much as 6 times compared with the control experiment （without Acidithiobacillus ferrooxidans ferrooxidans）. The maximum efficiency （92.3%） for microbial leaching is obtained in iron-containing medium, 20-40 mesh ore sizes, 20 kg·m^-3 ore density at pH 2.8, and the zinc content is found in the medium at about 120 mg·m^-1.

Recovery of gold from refractory gold ores: Effect of pyrite on the stability of the thiourea leaching system

The extraction of gold from refractory gold ores(RGOs)without side reactions is an extremely promising endeavor.However,most RGOs contain large amounts of sulfide,such as pyrite.Thus,investigation of the influence of sulfide on the gold leaching process is important to maximize the utilization of RGOs.In this work,the effects of pyrite on the stability of the thiourea system were systematically investigated under different conditions.Results showed that the decomposition rate of thiourea was accelerated sharply in the presence of pyrite.The effect of pyrite on gold recovery in thiourea leaching systems was then confirmed via a series of experiments.The decomposition efficiency of thiourea decreased by 40%and the recovery efficiency of gold increased by 56%after the removal of sulfide by roasting.Under optimal conditions,the efficiency of the gold recovery system increased to 83.69%and only 57.92%of thiourea decomposition was observed.The high consumption of thiourea by the leaching system may be attributed to not only adsorption by mineral particles but also catalytic decomposition by some impurities in the ores,such as pyrite and soluble ferric oxide.

Research on Technology of Pressure Pretreatment with Oxygen for Refractory Gold Ores

An combined technology of pressure pretreatment with oxygen on refractory gold ores is pointed out and discussed on this paper, according to the experiments included the test in 1 kg grade batch pressure pretreatment with oxygen of the concentrate from the refractory gold ores of Dongbeizhai in Sichuan province, which is called the most refractory gold ores in China. It is shown that gold recovery reach 91.73% in the combined process which is described as follows: The flotation of the sulphide gold ores is under controlled conditions, producing the concentrate for pressure pretreatment with oxygen in acidic medium and the middling for the pressure pretreatment with oxygen in alkaline medium. The thickening and washing process substitute the pressure filtration process of the pulp after pressure pretreatment. The thick slimes of the two kinds of pressure pretreatment were mixed and then enter the CIL process for simplifying the flowsheet. The possible superabundance of acid of pressure pretreatment with oxygen in acidic medium was neutralized by the tailings of flotation and the cost of neutralization will be lower. The combined technology of pressure pretreatment with oxygen has the same advantages as the normal technology of pressure pretreatment and both is helpful for environment protection.

Kinetics of leaching refractory gold ores by ultrasonic-assisted electro-chlorination

The resources of refractory gold ores are abundant, and their effective treatment can bring good economic benefits. This paper investigated the kinetics of leaching gold from refractory gold ores by ultrasonic-assisted electro-chlorination. The effects of ultrasound time ratio, initial hydrochloric acid concentration and leaching temperature on the kinetic parameters were discussed. It is found that the leaching ratio goes up with all the factors increasing. The reaction kinetics is controlled by diffusion. When ultrasound improves the diffusion by reducing the diffusion resistance, the activation energy increases to 37.1 kJ/mol.

Pretreatment of copper-bearing refractory gold ores by bio-heap leaching

The refractory gold ores associated with rich copper and trapped in pyrite and quartz were studied. With conventional technique （all-sliming cyanidation）, the gold recovery rate is only 51.78%. To eliminate the negative effects of copper and pyrite on cyanidation and increase the gold recovery rate, the investigation on bio-heap leaching pretreatment was made, by which Cu would be dissolved and gold would be liberated from pyrite. The experiment adopted mixed bacteria, mainly ThiobaciUus ferrooxidan （named T.fl ）, as the bacterial catalyst for bio-preconditioning and was carried out in a PVC column with a diameter of 20 cm and a height of 1.3 m loaded with gold ores. The temperature was controlled between 28 and 30℃, the pH value was kept between 2.0-2.5, and the flux of sprinkling bacterial liquid was maintained 0.80 L/h. After 45-day＇s bio-oxidization, among the samples sizing from 0 to 5 mm, the oxidation rates of Cu, Fe and S were respectively 44.62%, 28.16% and 25.46%, and the gold recovery rate by cyaniding increased to 80.35%. The bio-heap leaching pretreatment can therefore effectively dissolve Cu and liberate gold from pyrite and lead to the increase of gold extraction.

On the Mechanism of Transformation fromPrimary Ores into Oxidized Ores in FinelyDisseminated Gold Deposits

: This paper, taking the finely disseminated gold deposits in southwestern Guizhou and northwestern Guangxi as examples, discusses the difference between the occurrence of primary ores and that of oxidized ores, analyzes the occurrence mechanism in terms of crystallochemistry and geochemistry, and especially studies the chemical model for supergene leaching transformation of clay minerals in the two types of ores. This study proposes a new idea for dressing and smelting technology for primary gold ores.

Novel technology on preparation of double-layered pellets for sulfur and arsenic-bearing gold concentrates

Double-layered pellet （DLP） roasting is a novel pretreatment method for sulfur and arsenic-bearing gold concentrates. In this process, preparation of DLPs is a fundamental step which is required to produce DLPs with favorable mechanical strength and thermal stability. Studies were carried out to investigate the affecting factors and conditions on the preparation and properties of DLPs. The results show that moisture content has significant influence on DLPs preparation. With the increase of moisture content in the range of no more than 9.8%, drop resistance and compressive strength of green DLPs are raised and the pelletizing dynamics is improved accordingly. The optimum conditions are determined as moisture content of 9.8%, coating time of 14-16 min, drying temperature 〈80 ℃and drying gas velocity 〈1.2 m/s. When DLPs prepared under these conditions are roasted at 600 ℃ for 1 h, favorable removal and solidifying rates can be obtained, in which the removal rates of arsenic and sulfur are 94.38% and 82.55%, and the solidifying rates of arsenic and sulfur reach 99.62% and 99.79%, respectively. These results promise industrial application of DLP roasting.

Enhancement of bio-oxidation of refractory arsenopyritic gold ore by adding pyrolusite in bioleaching system

Pyrolusite was added in the bioleaching process to enhance the bio-oxidation process. Bioleaching tests at different dosages of pyrolusite ore, pH and inoculation amounts of Acidithiobacillus ferrooxidans were studied. The results showed that the time of the bio-oxidation process was decreased obviously and the arsenic leaching rate reached 94.4% after the bioleaching. The bio-oxidation of arsenopyrite and the effective extraction of manganese from pyrolusite were achieved by the bioleaching process. After bioleaching, the leaching rate of gold from the reaction residues reached 95.8% by cyanide leaching. In the bio-oxidation process, pyrolusite increased the redox potential of the solution to accelerate the bioleaching rate. The experiment showed that there were two reaction modes in the bioleaching process.

Effects of mutation on a new strain Leptospirillum ferriphilum YXW and bioleaching of gold ore

Leptospirillum ferriphilum YXW was isolated through serial dilution from mixed microorganisms enriched in AMD from Dexing copper mine in Jiangxi Province, China. It was mutated by ultrasonic, UV and microwave to collect more efficient strain for bioleaching of gold ore. Physiological and biochemical characteristics indicate that strain YXW is a strict chemoautotrophic microorganism, and the optimal condition for its growth is temperature of 40 °C and pH 1.5. After mutation by ultrasonic, UV and microwave, the density of bacterial cells reached 9×109, 8.4×109 and 4.3×108 mL-1, increased by 291%, 265%and 87%, respectively, compared with the original culture. The bacterial total protein activity was improved by microwave and UV mutations, but was reduced by ultrasonic. Mutations had effects on bioleaching of gold ore in sequence of microwave〉UV〉ultrasonic. During gold ore bioleaching, the bacterial mutant after mutation by microwave had the best effect on the extraction rates of arsenic and iron, which were 19.6%and 17.7%higher than that of the original strain after bioleaching for 10 d, respectively. The results suggested that the effects of mutation on bioleaching of gold ore may not be mainly due to increase of bacterial cells density, but may be mainly attributed to the improvement of bacterial total protein activity.

Roasting and chlorine leaching of gold-bearing refractory concentrate:Experimental and process analysis

This paper deals with gold extraction from a refractory concentrate by chlorine leaching.The process considers a pre-treatment of refractory materials by low temperature oxidation carried out with low oxygen concentration.The oxidized material is treated by leaching with brine.After gold adsorption/reduction onto activated carbon,iron and base metals can be precipitated by NaOH.Roasting tests show the necessity to carry out a thermal pre-treatment at least at 550°C to obtain a reduction of sulfur and mercury in the material(50%and 90%,respectively).Highest gold extraction yield(around 93%)is obtained in the leaching test performed with material sample treated at 650°C.This result confrms the necessity to optimize the thermal pre-treatment to improve Au recovery and to reduce chlorine consumption.A comparison with conventional cyanidation confrms that chlorination could be an useful alternative:in fact,gold extraction yield is quite low:57%in non-pre-treated material and 25%in pre-treatment material.

An Application of Microwave Pre-oxidation in Improving Gold Recovery of a Refractory Gold Ore

Microwave radiation was employed as a pretreating technology to oxidise a refractory gold ore. Heating characteristics showed that, in an identical microwave field, the bulk temperature of the sample increased with microwave power, microwave radiation time and particle size. The rate of sulphur removal increased with microwave radiation time. Particle size also had a significant effect on the oxidation rate. Pyrite and marcasite could be oxidised into Fe 2O 3 with a high porous structure. When microwave radiation was carried out in a rotary bed, the oxidation was more uniformly developed, in comparison with in a fixed bed. Gold extraction by cyanidation could be remarkably improved after the ore was subjected to microwave radiation. The results showed that gold recovery could be improved from 37% to 69%～ 81.2 %.

Simultaneous extraction of gold and zinc from refractory carbonaceous gold ore by chlorination roasting process

A novel process based on chlorination roasting was proposed to simultaneously recover gold and zinc from refractory carbonaceous gold ore by using NaCl as chlorination agent.The effects of roasting temperature,roasting time and NaCl content on the volatilization rates of gold and zinc were investigated.The reaction mechanism and the phase transition process were also analyzed by means of SEM,EDS and XRD.The results demonstrated that under the optimal conditions of NaCl content of 10%,roasting temperature of 800℃,roasting time of 4 h and gas flow rate of 1 L/min,the rates of gold and zinc were 92%and 92.56%,respectively.During low-temperature chlorination roasting stage,a certain content of sulfur was beneficial to the chlorination reactions of gold and zinc;and during high-temperature chlorination roasting stage,the crystal structure of vanadium-bearing mica was destroyed,and the vanadium-containing oxides were beneficial to the chlorinating volatilization of gold and zinc.Eventually,the chlorinated volatiles of gold and zinc could be recovered by alkaline solution.

Beneficiation of the gold bearing ore by gravity and flotation

Gold concentration usually consists of gravity separation, flotation, cyanidation, or the combination of these processes. The choice among these processes depends on the mineralogical characterization and gold content of the ore. Recently, the recovery of gold using gravity methods has gained attention because of low cost and environmentally friendly operations. In this study, gold pre-concentrates were produced by the stepwise gravity separation and flotation techniques. The Knelson concentrator and conventional flotation were employed for the recovery of gold. Gold bearing ore samples were taken from Gümüshane Region, northern east part of Turkey. As a result of stepwise Knelson concentration experiments, a gold concentrate assaying around 620 g/t is produced with 41.4wt% recovery. On the other hand, a gold concentrate about 82 g/t is obtained with 89.9wt% recovery from a gold ore assaying 6 g/t Au by direct flotation.

Valence variation of arsenic in bioleaching process of arsenic-bearing gold ore

The concentration and variational trend of As3 +and As 5+,the bacterial resistance for the As 3+and As 5+and converting conditions from As3 +to As 5+were analyzed.The additive was used to prompt the bacterial leaching efficiency by changing valence state of arsenic.The results show that the concentration of As 3+ is larger than that of As 5+ in the lag phase.The concentration of As 3+ decreases in the log phase,and is lower than that of As5 +.HQ-0211 typed bacteria express better resistance for As 3+and As 5+and remain growing when the concentrations of As3 +and As 5+are above 6.0 g/L and 12.0 g/L,respectively.It is found that Fe 3+cannot oxidize As3 +singly as strong oxidant in the leaching system,but can cooperate with pyrite or chalcopyrite to do that.The oxidation of As 3+ is prompted with addition of H2O2.The bacterial activity is improved in favor of bacterial leaching efficiency.NaClO restrains the bacterial growth to depress leaching efficiency because of the chloric compounds affecting bacterial activity.

Modeling heap biooxidation of arsenic-bearing gold ore

To design heap biooxidation process,it is necessary to understand its internal rules.The heap biooxidation of gold ore from Anhui province was researched in this study.The results showed that the main microorganisms in the heap were A.ferrooxidans,F.acidiphilum and L.ferrodiazotrophum.Under their combined action,gold leaching extent rose from 35.62%to 78.08%in 80 d.Boltzmann model matches the actual oxidation effect better and the model equations were obtained.The model predicted that the oxidation extents of arsenic and sulfur are 58.577%and 42.122%after one year,and the gold leaching extent was 80.40%.The arsenic and sulfur oxidation extents,and gold leaching extent were all linearly correlated.It is more reliable to predict gold leaching extent by sulfur oxidation extent.These results provided good guidance for practical application in the actual production.

Characterization of an iron oxy/hydroxide(gossan type) bearing refractory gold and silver ore by diagnostic leaching

A detailed characterization of an iron oxy/hydroxide(gossan type) bearing refractory gold/silver ore was performed with a new diagnostic approach for the development of a pretreatment process prior to cyanide leaching. Gold was observed to be present as native and electrum(6-24 μm in size) and associated with limonite, goethite and lepidocrocite within calcite and quartz matrix. Mineral liberation analysis(MLA) showed that electrum is found as free grains and in association with beudantite, limonite/goethite and quartz. Silver was mainly present as acanthite(Ag2S) and electrum and as inclusions within beudantite phase in the ore. The cyanide leaching tests showed that the extractions of gold and silver from the ore(d80: 50 μm) were limited to 76% and 23%, respectively, over a leaching period of 24 h. Diagnostic leaching tests coupled with the detailed mineralogical analysis of the ore suggest that the refractory gold and silver are mainly associated within iron oxide mineral phases such as limonite/goethite and jarosite-beudantite, which can be decomposed in alkaline solutions. Based on these characterizations, alkaline pretreatment of ore in potassium hydroxide solution was performed prior to cyanidation, which improved significantly the extraction of silver and gold up to 87% Ag and 90% Au. These findings suggest that alkaline leaching can be used as a new diagnostic approach to characterize the refractoriness of iron oxy/hydroxide bearing gold/silver ore and as a pretreatment method to overcome the refractoriness.

Acid leaching decarbonization and following pressure oxidation of carbonic refractory gold ore

Carbonate decomposition of carbonic refractory gold ore and the following pressure oxidation were studied.In the carbonate decomposition procedure,the effects of liquid-to-solid ratio and reaction time on decomposition ratio of carbonate were investigated.The experimental result shows that the decomposition ratio of carbonate is 98.24%under the conditions of liquid-to-solid ratio of 5:1,Fe^(3+)concentration of 20 g/L,sulfuric acid concentration of 20 g/L,reaction temperature of 80 ℃ and reaction time of 2 h.Then,the slurry obtained from carbonate decomposition was put into the titanium autoclave for pressure oxidation leaching.Effects of liquid-to-solid ratio,temperature,time and oxygen partial pressure on sulfur oxidation ratio were studied during pressure oxidation.With the prolonged time,pyrite and arsenopyrite are oxidized to ferric subsulfate,hydrated ferric sulfate and jarosite,resulting in the increasing residue ratio.The residue ratio and the sulfur content in the residue can be decreased by ferric subsulfate dissolution.The oxidation ratio of the sulfur is 99.35% under the conditions of oxidation time of 4 h,temperature of 210 ℃,oxygen partial pressure of 0.8 MPa and stirring speed of 600 r/min.

Improved recovery of a low-grade refractory gold ore using flotation–preoxidation–cyanidation methods

In this work, different flotation–preoxidation–cyanidation methods are considered for treating a lowgrade refractory gold ore. On the one hand, the results of selective flotation show that 22% and 31.1%of total Sb and As, respectively, remained in the final tailings and only about 28% of the total Au remained for further cyanidation processes. On the other hand, in bulk method of flotation the maximum Au recovery of 90.6% achieved after 60 min of flotation at the grind size with K80 of 146 micron. In addition, the bulk flotation method resulted in the concentrate with low concentrations of Sb and As elements. To improve the recovery of low-grade refractory gold ores, flotation should be followed by roasting, biological, or pressure oxidation processes so that the gold could be liberated prior to cyanidation processes. It is also found that the pressure oxidation pre-treatment of the concentrates prior to cyanidation may yield high gold recoveries of over than 83%. In these processes, recoveries are controlled by the temperature and the oxygen partial pressure in the solvent. However, by utilizing the bio-oxidation technique, the oxidation of sulfur to sulfate cannot be completed and, consequently, the gold recovery may be limited to only 72.2%.

Active and passive behaviors of gold in cyanide solutions

Active and passive behaviors of pure gold（Au） and roasted gold ore（RGO） electrodes were investigated at 25 °C in de-aerated agitated cyanide media.Cyclic voltammetry and potentiodynamic polarization with agitation at 100 r/min in 0.04 mol/L NaCN solution showed different peak positions and current densities.Potentiodynamic tests illustrate that the peak current densities increase greatly with increasing the cyanide concentration.Increasing the pH value from 10 to 11 resultes in a great decrease of current density,while it increases noticeably by decreasing the agitation from 100 to 60 r/min.In the presence of oxygen,Au and RGO electrodes show different characteristics of peak positions and corrosion rates.The potentiostatic studies show that increasing the potential from 1 to 1.4 V at pH value of 11 results in an 80% decrease of current density while decreasing the pH value from 11 to 10 at 1 V gives a 1.7 fold increase of current density,possibly due to more effective passive layer.Following polarization,electrochemical noise measurements（ENM） during decay periods show that Au results in more passive states at high potentials,showing pitting corrosion.The ENM results show that this technique can be a promising tool for a better understanding of gold leaching.The XPS studies prove the presence of passive oxides.