Formation mechanism and wear behavior of gradient nanostructured Inconel 625 alloy

The formation mechanism and wear behavior of a gradient nanostructured(GNS) Inconel 625 alloy were investigated using SEM, TEM and ball-on-disc sliding wear tester. The results show that surface mechanical grinding treatment(SMGT) induced an approximately 800 μm-deep gradient microstructure, consisting of surface nano-grained,nano-laminated, nano-twined, and severely deformed layers, which resulted in a reduced gradient in micro-hardness from 6.95 GPa(topmost surface) to 2.77 GPa(coarse-grained matrix). The nano-grained layer resulted from the formation of high-density nano-twins and subsequent interaction between nano-twins and dislocations. The width and depth of the wear scar, wear loss volume, and wear rate of the SMGT-treated sample were smaller than those of untreated coarse-grained sample. Moreover, the wear mechanisms for both samples were mainly abrasive wear and adhesive wear, accompanied with mild oxidation wear. The notable wear resistance enhancement of the GNS Inconel 625 alloy was attributed to the high micro-hardness, high residual compressive stress, and high strain capacity of the GNS surface layer.

Enhanced initial biodegradation resistance of the biomedical Mg-Cu alloy by surface nanomodification

Mg-Cu alloys are promising antibacterial implant materials.However,their clinical applications have been impeded by their high initial biodegradation rate,which can be alleviated using nanotechnology by for example surface nanomodification to obtain a gradient nanostructured surface layer.The present work(i)produced a gradient nanostructured surface layer with a∼500µm thickness on a Mg-0.2 Cu alloy by a surface mechanical grinding treatment(SMGT),and(ii)studied the biodegradation behavior in Hank's solution.The initial biodegradation rate of the SMGTed samples was significantly lower than that of the unSMGTed original counterparts,which was attributed to the surface nanocrystallization,and the fragmentation and re-dissolution of Mg_(2)Cu particles in the surface of the SMGTed Mg-0.2 Cu alloy.Furthermore,the SMGTed Mg-0.2 Cu alloy had good antibacterial efficacy.This work creatively used SMGT technology to produce a high-performance Mg alloy implant material.

Surface nanocrystallization in AISI 52100 steel induced by surface mechanical grinding treatment(SMGT)

Surface nanocrystallization(SNC) has proved to be an effective approach to improve the overall properties of bulk metallic materials.Recently,a new surface nanocrystallization technique,i.e.,surface mechanical grinding treatment(SMGT),was developed.In this work,a gradient nano-micro structure was achieved in the surface layer of the AISI 52100 steel by using SMGT.We obtained a minimum grain size of about 7nm in the top surface layer.The total thickness of the deformed layer is over 200 micrometer.Meanwhile the surface roughness is rather low. Ferrite grains were deformed to different extents varying with depth from the top surface.Gradient grain sizes were formed from top surface to deep matrix which offered a great opportunity to study the refinement process of the ferrite grains.It is found that dislocation activities play a dominant role in the process.At the initiate stage, dislocations accumulated and interacted to form dense dislocation walls and cells.Increasing strain and strain rate induced more dislocation walls in cells,forming finer cells.This procedure continued until nanograins formed at the top most surface. The existence of cementite particles in ferrite matrix greatly facilitates the ferrite refinement process.Boundaries between ferrites and cementites offered many dislocation sources which accelerate the propagation of dislocations. Dislocation walls were blocked by cementites which certainly lead to finer dislocation cells.The existence of cementites makes it easier to generate fresh dislocation walls in sub-micron grains.A strain gradient was formed from a cementite particle to surrounding ferrite grains.This strain gradient gives rise to more geometric necessary dislocations. As ferrite grain size decreased less than that of cementite particles,fragmentation occurred in cementites.Hard second phase was usually considered as brittle.In this work,evidences of deformation(traces of dislocation activities) in cementites were distinct.Since the stress concentration in the phase boundary(especially triple junction) excesses the shear modulus of cementite,dislocation emission was triggered.It is found in this work that dislocations tend to slip along parallel planes,possibly on(001),(01 0),(100),(110),(10 1 ) and(011) planes,depending upon as the load directions.

Density gradient ultracentrifugation for colloidal nanostructures separation and investigation

In this article,we review the advancement in nanoseparation and concomitant purification of nanoparticles(NPs) by using density gradient ultracentrifugation technique(DGUC) and demonstrated by taking several typical examples.Study emphasizes the conceptual advances in classification,mechanism of DGUC and synthesis-structure-property relationships of NPs to provide the significant clue for the further synthesis optimization.Separation,concentration,and purification of NPs by DGUC can be achieved at the same time by introducing the water/oil interfaces into the separation chamber.We can develop an efficient method ‘‘lab in a tube" by introducing a reaction zone or an assembly zone in the gradient to find the surface reaction and assembly mechanism of NPs since the reaction time can be precisely controlled and the chemical environment change can be extremely fast.Finally,to achieve the best separation parameters for the colloidal systems,we gave the mathematical descriptions and computational optimized models as a new direction for making practicable and predictable DGUC separation method.Thus,it can be helpful for an efficient separation as well as for the synthesis optimization,assembly and surface reactions as a potential cornerstone for the future development in the nanotechnology and this review can be served as a plethora of advanced notes on the DGUC separation method.

An extraordinary-performance gradient nanostructured Hadfield manganese steel containing multi-phase nanocrystalline-amorphous core-shell surface layer by laser surface processing

Reducing grain size(i.e.increasing the fraction of grain boundaries)could effectively strengthen nanograined metals but inevitably sacrifices the ductility and possibly causes a strengthening-softening transition below a critical grain size.In this work,a facile laser surface remelting-based technique was employed and optimized to fabricate a∼600μm-thick heterogeneous gradient nanostructured layer on an austenitic Hadfield manganese steel,in which the average grain size is gradually decreased from∼200μm in the matrix to only∼8 nm in the nanocrystalline-amorphous core-shell topmost surface.Atomic-scale microstructural characterizations dissected the gradient refinement processes along the gradient direction,i.e.transiting from the dislocations activities and twinning in sub-region to three kinds of martensitic transformations,and finally a multi-phase nanocrystalline-amorphous core-shell structural surface.Mechanical tests(e.g.nanoindentation,bulk-specimen tensile,and micro-pillar compression)were conducted along the gradient direction.It confirms a tensile strength of∼1055 MPa and ductility of∼10.5%in the laser-processed specimen.Particularly,the core-shell structural surface maintains ultra-strong(tensile strength of∼1.6 GPa,micro-pillar compressive strength of∼4 GPa at a strain of∼8%,and nanoindentation hardness of∼7.7 GPa)to overcome the potential strengthening-softening transition.Such significant strengthening effects are ascribed to the strength-ductility synergetic effects-induced extra work hardening ability in gradient nanostructure and the well-maintained dislocation activities inside extremely refined nanograins in the multi-phase nanocrystalline-amorphous core-shell structural surface,which are evidenced by atomic-scale observations and theoretical analysis.This study provides a unique hetero-nanostructure through a facile laser-related technique for extraordinary mechanical performance.

Combining gradient structure and supersaturated solid solution to achieve superior mechanical properties in WE43 magnesium alloy

In this study,surface mechanical attrition treatment was employed to sucessfully produce a gradient nanostructured layer on WE43 magnesium alloy.X-ray diffraction,energy dispersive X-ray spectrometer,and high-resolution transmission electron microscope observations were mainly performed to uncover the microstructure evolution responsible for the refinement mechanisms.It reveals that the grain refinement process consists of three transition stages along the depth direction from the core matrix to the topmost surface layer,i.e.,dislocation cells and pile-ups,ultrafine subgrains,and randomly orientated nanograins with the grain size of~40 nm.Noticeably,the original Mg;RE second phase is also experienced refinement and then re-dissolved into the α-Mg matrix phase,forming a supersaturated solid solution nanostructuredα-Mg phase in the gradient refined layer.Due to the cooperative effects of grain refinement hardening,dislocation hardening,and supersaturated solid-solution hardening,the gradient nanostructured WE43 alloy contributes to the ultimate tensile strength of~435 MPa and ductility of~11.0%,showing an extraordinary strain hardening and mechanical properties among the reported severe plastic deformation-processed Mg alloys.This work provides a new strategy for the optimization of mechanical properties of Mg alloys via combining the gradient structure and supersaturated solid solution.

Laser surface treatment-introduced gradient nanostructured TiZrHfTaNb refractory high-entropy alloy with significantly enhanced wear resistance

Heterogeneous gradient nanostructured metals have been shown to achieve the strength-ductility synergy, thus potentially possessing the enhanced tribological performance in comparison with their homogeneous nanograined counterparts. In this work, a facile laser surface remelting-based surface treatment technique is developed to fabricate a gradient nanostructured layer on a TiZrHfTaNb refractory highentropy alloy. The characterization of the microstructural evolution along the depth direction from the matrix to the topmost surface layer shows that the average grain size in the ~100 μm-thick gradient nanostructured layer is dramatically refined from the original ~200 μm to only ~8 nm in the top surface layer. The microhardness is therefore gradually increased from ~240 HV in matrix to ~650 HV in the topmost surface layer, approximately 2.7 times. Noticeably, the original coarse-grained single-phase bodycentered-cubic TiZrHfTaNb refractory high-entropy alloy is gradually decomposed into TiNb-rich bodycentered-cubic phase, TaNb-rich body-centered-cubic phase, ZrHf-rich hexagonal-close-packed phase and TiZr Hf-rich face-centered-cubic phase with gradient distribution in grain size along the depth direction during the gradient refinement process. As a result, the novel laser surface treatment-introduced gradient nanostructured TiZrHfTaNb refractory high-entropy alloy demonstrates the significantly improved wear resistance, with the wear rate reducing markedly by an order of magnitude, as compared with the as-cast one. The decomposed multi-phases and gradient nanostructures should account for the enhanced wear resistance. Our findings provide new insights into the refinement mechanisms of the laser-treated refractory high-entropy alloys and broaden their potential applications via heterogeneous gradient nanostructure engineering.

The Portevin-Le Chatelier effect of gradient nanostructured 5182 aluminum alloy by surface mechanical attrition treatment

Nanocrystalline surface layers and gradient nanostructure in 5182 aluminum alloy have been produced through surface mechanical attrition treatment(SMAT). The results indicate that the gradient nanostructure can not only improve the mechanical properties of 5182 Al alloy, but also has a certain effect on the Portevin-Le Chatelier(PLC) effect. The yield and ultimate tensile strength of 5182 Al alloy with SMAT are significantly improved combining with the decrease of fracture elongation compared with the as-received one. The PLC effect of 5182 Al alloy could be effectively postponed by the formation of gradient nanostructure after SMAT. It leads to the increase of critical strain of the PLC effect, more concentrated distribution of serrated strain, and increase of average stress amplitude in special strain range. The influence of grain size and gradient nanostructure on the PLC effect of 5182 Al alloy was also discussed in detail. Grain refinement could sharply increase the density of dislocations and hinder the movement of dislocations, which results in the decrease of moving speed of dislocations and the more concentrated distribution of solute atoms. The solute atoms would aggregate to form nano precipitates and further impede movement of dislocation. The stronger interaction between the dislocations and the nano precipitates is the main mechanism of postponed PLC effect.

Strain-induced formation of a gradient nanostructured surface layer on an ultrahigh strength bearing steel

In the present work, an ultrahigh strength bearing steel（AISI 52100） was subjected to surface mechanical rolling treatment（SMRT） at room temperature. Microstructural observations showed that martensitic laths, twins and cementite particles in the initial microstructure underwent distinct plastic strains and were gradually refined into nanostructures. Consequently, a gradient nanostructured（GNS） surface layer with a mean grain size of -24 nm at the top surface was obtained on the bearing steel, resulting in an increment of -20% in the surface hardness. Analyses based on microstructural evolution, phase constitution and in-depth hardness distribution revealed a mechanically induced formation mechanism of the GNS surface layer. The multiple surface severe plastic deformation under fine lubrication and cooling during SMRT contributed to the formation of a thick hardened surface layer on the bearing steel.

Enhanced Fatigue Property of Welded S355J2W Steel by Forming a Gradient Nanostructured Surface Layer

Welded joints are usually characterized by microstructural and compositional inhomogeneities, which may significantly degrade their fatigue properties and result in unpredictable failures. The present work demonstrates a novel and simple method to effectively optimize the microstructure in the surface layer and promote the fatigue properties of welded specimens. By a recently developed approach—surface mechanical rolling treatment(SMRT), a gradient nanostructured surface layer is formed on welded S355 J2 W steel specimens. The mean grain size is refined to nanometer scale, and the hardness is significantly enhanced in the SMRT surface layer. Independent of the initially inhomogeneous microstructure and hardness distributions, the microstructure and hardness distributions in the surface layers are comparable on different zones of a welded specimen after SMRT with the same procedure. Consequently, fatigue property of the SMRT specimens is significantly enhanced relative to that of the as-welded specimens within the high cycle fatigue regime.

Antibacterial property and bioadaptability of Ti6Al4V alloy with a silvered gradient nanostructured surface layer

In this paper,a silvered gradient nanostructured(GNS)layer was successfully fabricated on Ti6Al4V surface by means of surface ultrasonic rolling treatment(SURT)combined with silvering process.Surface characteristics,mechanical properties,corrosion resistance,antibacterial ability and cytotoxicity of GNS Ag/Ti6Al4V were investigated in comparison with those of coarse-grained(CG)and GNS Ti6Al4V samples.Owing to the greatly enhanced diffusion kinetics of Ag in the GNS layer,surface silvering on GNS Ti6Al4V was achieved at a relatively low temperature(500℃),and the release rate of Ag^(+)was substantially accelerated,which endowed GNS Ag/Ti6Al4V with excellent antibacterial property.Moreover,improved wear and corrosion resistance of GNS Ag/Ti6Al4V can be achieved without cytotoxicity,indicating excellent bioadaptability.

Atomic-scale dissecting the formation mechanism of gradient nanostructured layer on Mg alloy processed by a novel high-speed machining technique

Severe plastic deformation(SPD)-induced gradient nanostructured(GNS)metallic materials exhibit superior mechanical performance,especially the high strength and good ductility.In this study,a novel high-speed machining SPD technique,namely single point diamond turning(SPDT),was developed to produce effectively the GNS layer on the hexagonal close-packed(HCP)structural Mg alloy.The high-resolution transmission electron microscopy observations and atomistic molecular dynamics simulations were mainly performed to atomic-scale dissect the grain refinement process and corresponding plastic deformation mechanisms of the GNS layer.It was found that the grain refinement process for the formation of the GNS Mg alloy layer consists of elongated coarse grains,lamellar fine grains with deformation-induced-tension twins and contraction twins,ultrafine grains,and nanograins with the grain size of~70 nm along the direction from the inner matrix to surface.Specifically,experiment results and atomistic simulations reveal that these deformation twins are formed by gliding twinning partial dislocations that are dissociated from the lattice dislocations piled up at grain boundaries.The corresponding deformation mechanisms were evidenced to transit from the deformation twinning to dislocation slip when the grain size was below 2.45μm.Moreover,the Hall-Petch relationship plot and the surface equivalent stress along the gradient direction estimated by finite element analysis for the SPDT process were incorporated to quantitatively elucidate the transition of defo rmation mechanisms during the grain refinement process.Our findings have implications for the development of the facile SPD technique to construct high strength-ductility heterogeneous GNS metals,especially for the HCP metals.

Fatigue life improvement and grain growth of gradient nanostructured industrial zirconium during high cycle fatigue

The effect of surface gradient nanostructure on the fatigue life of commercial pure(CP)Zr was investigated.Four point bending fatigue tests indicated that the fatigue limit of CP Zr with surface gradient nanostructure was increased by about 28.3%compared with the original sample(annealed state).The microstructure evolution at different fatigue loading stages was characterized.The high strength of surface gradient nanostructure could increase the crack initiation resistance.Furthermore,electron back scattered diffraction(EBSD)analysis demonstrated that the surface nanocrystals grew and rotated gradually during the fatigue loading,which was beneficial to reducing stress concentration,inhibit fatigue crack initiation,and prolong crack initiation life.The stored distortion energy of CP Zr calculated before and after fatigue indicated that the stored distortion energy decreased dramatically during cyclic loading,which provided the driving force for grain growth.Besides,the growth of nanocrystals consumed the mechanical energy produced by the applied load to a certain extent,thus,slowing down the accumulation of fatigue damage.The coarse grains at the interior could deform plastically and reduce the crack growth rate.In addition,the compressive residual stress caused by USSP treatment reduced the local effective stress and the driving force of crack growth.

Synthesis and deformation mechanics of gradient nanostructured materials

The emerging gradient nanostructured metals and alloys containing spatially graded structural components with large variations in length scale and/or mechanical properties exhibit unprecedented mechanical performance.This perspective delineates the basic structural features of gradient nanostructures,i.e.,structural components and spatial gradients,as well as related synthesis methods,excellent tensile properties,and novel deformation mechanisms.The challenges and prospect for the development of gradient nanostructured materials in the future are also addressed.