Functionally graded structure of a nitride-strengthened Mg_(2)Si-based hybrid composite

The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.

Discussion on "Thermomagnetic viscoelastic responses in a functionally graded hollow structure"

Allam and Tantawy [1] presented an analytical solu- tion for stress distribution and perturbations of the magnetic field vector in FGM hollow structures made from viscoelas- tic composite materials .While studying this article, the dis- cusser noticed a confusion in regarding Maxwell＇s electro- magnetic stress expression

Functionally Graded Cellular Structure Design Using the Subdomain Level Set Method with Local Volume Constraints

Functional graded cellular structure(FGCS)usually shows superiormechanical behaviorwith lowdensity and high stiffness.With the development of additivemanufacturing,functional graded cellular structure gains its popularity in industries.In this paper,a novel approach for designing functionally graded cellular structure is proposed based on a subdomain parameterized level set method(PLSM)under local volume constraints(LVC).In this method,a subdomain level set function is defined,parameterized and updated on each subdomain independently making the proposed approach much faster and more cost-effective.Additionally,the microstructures on arbitrary two adjacent subdomains can be connected perfectly without any additional constraint.Furthermore,the local volume constraint for each subdomain is applied by virtue of the augmented Lagrange multiplier method.Finally,several numerical examples are given to verify the correctness and effectiveness of the proposed approach in designing the functionally graded cellular structure.From the optimized results,it is also found that the number of local volume constraints has little influence on the convergence speed of the developed approach.

Laboratory-scale investigation of the material distribution characteristics of landslide dams in U-shaped valleys

Material distribution characteristics during sliding and depositing is particularly significative to investigate the internal structure and spatial variation of landslide dams,which are fundamentally determining the mechanical and hydraulic behavior and the susceptibility to cause dam failure.However,limited by longevity shortages and special geographic environments,the material distribution characteristics and their formation mechanisms are difficult to observe in the field.Therefore,an experimental apparatus modeling a landslide dam was developed in this paper,designing three sampling methods with two valley states.The internal deposit characteristics,void ratio variation and relative content of the particle size range(PSR)were analyzed,and the mechanics of deposit structure were also delicately ascertained.The results indicate that granular material deposited in valley shows a structure of inverse grain size accumulation in both vertical and horizontal directions,exhibiting spatial variability of particle gradation and void ratio.The characteristic PSR decreases from 22-30 mm in the two-dimensional state to 10-14 mm in the threedimensional state.Vibration excitation and vibration sieve are the intrinsic mechanisms of granular flow segregation,intrinsically inducing the formation of inverse grading deposit structures.Consequently,spatial variability in size is mainly trig gered by segregation,whereas coarse particle content and deposition boundaries merely exacerbate the difference degree.

A Hybrid Level Set Optimization Design Method of Functionally Graded Cellular Structures Considering Connectivity

With the continuous advancement in topology optimization and additive manufacturing(AM)technology,the capability to fabricate functionally graded materials and intricate cellular structures with spatially varying microstructures has grown significantly.However,a critical challenge is encountered in the design of these structures–the absence of robust interface connections between adjacent microstructures,potentially resulting in diminished efficiency or macroscopic failure.A Hybrid Level Set Method(HLSM)is proposed,specifically designed to enhance connectivity among non-uniform microstructures,contributing to the design of functionally graded cellular structures.The HLSM introduces a pioneering algorithm for effectively blending heterogeneous microstructure interfaces.Initially,an interpolation algorithm is presented to construct transition microstructures seamlessly connected on both sides.Subsequently,the algorithm enables the morphing of non-uniform unit cells to seamlessly adapt to interconnected adjacent microstructures.The method,seamlessly integrated into a multi-scale topology optimization framework using the level set method,exhibits its efficacy through numerical examples,showcasing its prowess in optimizing 2D and 3D functionally graded materials(FGM)and multi-scale topology optimization.In essence,the pressing issue of interface connections in complex structure design is not only addressed but also a robust methodology is introduced,substantiated by numerical evidence,advancing optimization capabilities in the realm of functionally graded materials and cellular structures.

Bonding strength of graded anti-corrosive coatings of fluoroethylenepropylene (FEP)/polyphenylene sulfide (PPS)

Fluororesin-based anti-corrosive coatings including graded FEP/PPS were prepared on carbon steel by melt powder coating, the bonding strength of all coating systems was determined by the pull-off test. It is found that the poor adhesion of fluororesin coatings to metallic substrates is improved obviously by the graded coating structure of FEP/PPS, and the bonding strength reaches up to 11.8 MPa for the five-layer system. Examination by electron probe microanalysis （EPMA） verifies that the distribution of main components is graded in the five-layer system, which is responsible for the enhancement of the interfacial bonding.

A New BEM for Fractional Nonlinear Generalized Porothermoelastic Wave Propagation Problems

The main purpose of the current article is to develop a novel boundary element model for solving fractional-order nonlinear generalized porothermoelastic wave propagation problems in the context of temperaturedependent functionally graded anisotropic(FGA)structures.The system of governing equations of the considered problem is extremely very difficult or impossible to solve analytically due to nonlinearity,fractional order diffusion and strongly anisotropic mechanical and physical properties of considered porous structures.Therefore,an efficient boundary element method(BEM)has been proposed to overcome this difficulty,where,the nonlinear terms were treated using the Kirchhoff transformation and the domain integrals were treated using the Cartesian transformation method(CTM).The generalized modified shift-splitting(GMSS)iteration method was used to solve the linear systems resulting from BEM,also,GMSS reduces the iterations number and CPU execution time of computations.The numerical findings show the effects of fractional order parameter,anisotropy and functionally graded material on the nonlinear porothermoelastic stress waves.The numerical outcomes are in very good agreement with those from existing literature and demonstrate the validity and reliability of the proposed methodology.

Mechanical properties and shape memory behavior of 4D printed functionally graded cellular structures

The properties of functionally graded(FG) cellular structures vary spatially, and the varying properties can meet the requirements of different working environments. In this study, we fabricated FG cellular structures with shape memory effect by 4D printing and evaluated the compressive performance and shape memory behavior of these structures with temperature through experimental analysis and finite element simulations. The results show that the maximum energy absorption gradually decreases but the compressive modulus gradually increases with increasing gradient parameters. Moreover, the finite element simulations also show that the compressive deformation mode of the structure shifts from uniform to non-uniform deformation with increasing gradient parameters. The compressive modulus and compressive strength of 4D printed FG structures decrease with increasing temperature due to the influence of the shape memory polymer, and they exhibit outstanding shape recovery capability under high-temperature stimulus. The proposed 4D printed FG structures with such responsiveness to stimulus shed light on the design of intelligent energy-absorbing devices that meet specific functional requirements.

Dynamic Fracture Simulation of Functionally Graded Engineered Cementitious Composite Structures Based on Peridynamics

In this paper,a semi-discrete model based on peridynamics(PD)for engineered cementitious composites(ECCs)is applied to simulate the fracture behavior of functionally graded ECC(FGECC)beams.This is a new application of PD in ECC.Prior to simulating the crack behavior,the convergence of the PD model for ECC is discussed and the appropriate horizon size 5 and nonlocal ratio m are obtained,i.e.,S=1.6 mm and m=4.In addition,when the bond strain exceeds the elastic limit,a damage variable is introduced into the model,and the model is validated using a simple numerical algorithm.Finally,the dynamic fracture behavior of a two-dimensional FGECC beam under four-point bending is investigated,and the effect of the initial crack location on the fracture behavior is analyzed.Simulation results show that the initial crack location can affect the crack propagation pattern,thereby enabling one to understand the dynamic fracture behavior of ECC structures and guide the engineering practice.

基于独立连续映射法的位移约束梯度点阵结构轻量化拓扑优化

基于独立连续映射(ICM)方法提出一种以位移约束下体积最小为目标的梯度点阵结构拓扑优化设计新方法.首先采用基于应变能的均匀化方法分析了梯度单元的有效弹性特性.建立四次多项式插值的代理模型,将独立的连续拓扑变量映射到单元的有效弹性矩阵,建立了宏观结构与微观单元之间的关系.其次,建立轻量化拓扑优化模型,通过灵敏度分析将其转化为显式标准二次规划问题,并用对偶序列二次规划求解.数值算例表明,与均匀点阵结构相比,梯度点阵结构具有更好的轻量化效果,验证了该方法的有效性和可行性.结果表明,随着位移约束的增加,梯度点阵结构变得更轻.此外,还得到了一些不同的拓扑构型.该方法为梯度点阵结构设计提供参考,并扩展ICM方法的应用范围.

Design and preparation of gradient graphite/cermets self-lubricating composites

Based on the functionally graded materials （FGMs） design concept, the laminated-graded graphite/cermets self-lubricating composite was prepared to achieve the integration of mechanical prop- erties and lubrication performance of the cermet. The effects of the layer number and thickness of graded structure on residual stresses in the gradient composites were investigated by finite element method （FEM）. From the FEM analyses, the optimal gradient structure design was obtained correspond- ing to the following parameters： the number of graded layers n = 2 and the thickness of graded structure t = I ram. According to the optimum design, a graded graphite/cermets self-lubricating material with two layers was fabricated by a typical powder metallurgy technique. Compared with the homogenous graphite/cermets composite, the surface hardness and indentation fracture toughness of graded compos- ite were increased by approximately 15.9% and 6.3%, respectively. The results of X-ray diffraction （XRD） stress measurement identified the existence of residual compressive stress on the surface of graded com- posite. Additionally, the friction and wear tests revealed that the wear resistance of the graphite/cermets self-lubricating composite was improved significantly via the graded structural design, whereas the coefficient of friction changed slightly.