Utilizing sediment grain size characteristics to assess the effectiveness of clay–sand barriers in reducing aeolian erosion in Minqin desert area,China

The clay–sand barriers in Minqin desert area,China,represent a pioneering windbreak and sand fixation project with a venerable history of 60 a.However,studies on evaluating the long-term effectiveness of clay–sand barriers against aeolian erosion,particularly from the perspective of surface sediment grain size,are limited and thus insufficient to ascertain the protective impact of these barriers on regional aeolian activities.This study focused on the surface sediments(topsoil of 0–3 cm depth)of clay–sand barriers in Minqin desert area to explain their erosion resistance from the perspective of surface sediment grain size.In March 2023,six clay–sand barrier sampling plots with clay–sand barriers of different deployment durations(1,5,10,20,40,and 60 a)were selected as experimental plots,and one control sampling plot was set in an adjacent mobile sandy area without sand barriers.Surface sediment samples were collected from the topsoil of each sampling plot in the study area in April 2023 and sediment grain size characteristics were analyzed.Results indicated a predominance of fine and medium sands in the surface sediments of the study area.The deployment of clay–sand barriers cultivated a fine quality in grain size composition of the regional surface sediments,increasing the average contents of very fine sand,silt,and clay by 30.82%,417.38%,and 381.52%,respectively.This trend became markedly pronounced a decade after the deployment of clay–sand barriers.The effectiveness of clay–sand barriers in erosion resistance was manifested through reduced wind velocity,the interception of sand flow,and the promotion of fine surface sediment particles.Coarser particles such as medium,coarse,and very coarse sands predominantly accumulated on the external side of the barriers,while finer particles such as fine and very fine sands concentrated in the upwind(northwest)region of the barriers.By contrast,the contents of finest particles such as silt and clay were higher in the downwind(southeast)region of the sampling plots.For the study area,the deployment of clay–sand barriers remains one of the most cost-effective engineering solutions for aeolian erosion control,with sediment grain size parameters serving as quantitative indicators for the assessment of these barriers in combating desertification.The results of this study provide a theoretical foundation for the construction of windbreak and sand fixation systems and the optimization of artificial sand control projects in arid desert areas.

Grain size and surface micro-texture characteristics and their paleoenvironmental significance of Holocene sediment in southern margin of the Gurbantunggut Desert,China

The southern margin of the Gurbantunggut Desert,China,is characterized by alternating layers of aeolian and alluvial deposits.Investigating the characteristics of arenaceous sediment in this area is of significant importance for understanding the interactive processes of wind and water forces,as well as the provenance of sediment.However,there are relatively few investigations on the characteristics of such sediment at present.In this study,we researched three aeolian-alluvial interactive stratigraphic profiles and different types of surface sediment on the desert-oasis transitional zone of southern margin of the Gurbantunggut Desert.Based on the optically stimulated luminescence(OSL)dating of aeolian sand and analyses of quartz sand grain size and surface micro-texture,we explored the aeolian-alluvial environmental change at southern margin of the desert in Holocene,as well as the provenance of sediment.The results indicated that the grain size characteristics of different types of sediment in the stratigraphic profiles were similar to those of modern dune sand,interdune sand,muddy desert surface soil,and riverbed sand.Their frequency curves were unimodal or bimodal,and cumulative probability curves were two-segment or three-segment,mainly composed of suspension load and saltation load.The quartz sand in the sediment at southern margin of the desert had undergone alternating transformation of various exogenic forces,with short transportation distance and time,and sedimentary environment was relatively humid.In Holocene,southern margin of the desert primarily featured braided river deposits,and during intermittent period of river activity,there were also aeolian deposits such as sand sheet deposits,stabilized dune deposits,and mobile dune deposits.The provenance for Holocene alluvial deposits at southern margin of the desert remains relatively constant,with the debris of the Tianshan Mountains being the primary provenance.Aeolian sand is mainly near-source recharge,which is formed by in situ deposition of fluvial or lacustrine materials in southern margin of the desert transported by wind erosion,and its provenance was still the weathered debris of the Tianshan Mountains.In addition,the sand in interior of the desert may be transported by northwest wind in desert-scale,thus affecting the development of dunes in southern margin of the desert.The results of this study provide a reference for understanding the composition and provenance changes of desert sand in the context of global climate change.

Correlation Study on Grain Size Characteristics and Geotechnical Properties of Surface Sediments in Qingdao Offshore Area

The comprehension of sediment grain size parameters and the corresponding sedimentary environment holds paramount importance in elucidating the engineering geological attributes of the subaqueous seabed.This study delineated the sedimentary environment zoning in the northern sea area of Qingdao through cluster analysis of grain size parameters derived from 123 surface sediment samples.The study analyzed the correlation between sediment geotechnical indices and grain size parameters across diverse sedimentary environments.A correlation equation was established for samples exhibiting a strong correlation.The study found four distinct sedimentary environments in the study area:coastal,transitional,shallow sea,and residual.Within the same sedimentary environment,the average grain size and sorting coefficient exhibit significant correlations with geotechnical indices such as water content,density,shear strength,plastic limit,liquid limit,and plastic index.However,notable disparities in the correlation between grain size parameters and geotechnical indices emerge across different sedimentary environments.

Effect of Skeleton Grain Size on the Saturation of Gas Hydrate in Natural Sediments

Natural gas hydrate is prospected as a new and promising,highly clean energy resource that mainly occurs in perma-frost or at continental margins.Its formation is subject to many soil conditions,such as grain size,matrix materials,pore morphology,and permeability.In this study,we propose that grain size is the most decisive parameter that affects the saturation of gas hydrate in sediments based on data from Ocean Drilling Program Leg 164 and Mallik 5L-38,which represent marine sediments and terrestrial sediments,respectively.Our study reveals that high gas hydrate saturation generally occurs in coarse-grained sand,regardless of whether sediment formation is homogeneous or inhomogeneous,and the sorting of sediments may affect the hydrate saturation to a certain degree.Using grain size and sorting of sediments may be the most intuitive proxy method for a rough estimation of hydrate saturation.Further study is necessary to fully understand the relationship between hydrate morphology and sediment grain size,even though massive hydrates are typically found in fine clayey-rich sediments.

Natural variation of an autophagy-family gene among rice subspecies affects grain size and weight

Elucidating the genetic basis of natural variation in grain size and weight among rice varieties can help breeders develop high-yielding varieties.We identified a novel gene,GW3a(Grain Weight 3a)(LOC_Os03g27350),that affects rice grain size and weight.gw3a mutants showed higher total starch content and dry matter accumulation than the wild type(WT),Nipponbare,suggesting that GW3a negatively regulates grain size and weight.Moreover,our study found that GW3a interacted with OsATG8 by cleaving it,suggesting that GW3a may be involved in the assembly of autophagosomes and starch degradation in plants.The haplotype analysis of GW3a showed functional differences between indica and japonica rice.Taken together,we conclude that GW3a is expressed in the autophagosome pathway regulating starch metabolism in rice,affecting yield-related traits,such as grain size,grain weight and thousand grain weight(TGW).Our findings also shed new light on autophagy-mediated yield trait regulation,proposing a possible strategy for the genetic improvement of high-yield germplasm in rice.

Effect of grain size on gas bubble evolution in nuclear fuel:Phase-field investigations

Numerous irradiation-induced gas bubbles are created in the nuclear fuel during irradiation, leading to the change of microstructure and the degradation of mechanical and thermal properties. The grain size of fuel is one of the important factors affecting bubble evolution. In current study, we first predict the thermodynamic behaviors of point defects as well as the interplay between vacancy and gas atom in both UO_(2) and U_(3)Si_(2) according to ab initio approach. Then, we establish the irradiation-induced bubble phase-field model to investigate the formation and evolution of intra-and inter-granular gas bubbles. The effects of fission rate and temperature on the evolutions of bubble morphologies in UO_(2) and U_(3)Si_(2) have been revealed. Especially, a comparison of porosities under different grain sizes is examined and analyzed. To understand the thermal conductivity as functions of grain size and porosity, the heat transfer capability of U_(3)Si_(2) is evaluated.

Rice AGL1 determines grain size and sterile lemma identity

The grass spikelet is a unique inflorescence structure that determines grain size.Although many genetic factors have been well characterized for grain size and glume development,the underlying molecular mechanisms in rice are far from established.Here,we isolated rice gene,AGL1 that controlled grain size and determines the fate of the sterile lemma.Loss of function of AGL1 produced larger grains and reduced the size of the sterile lemma.Larger grains in the agl1 mutant were caused by a larger number of cells that were longer and wider than in the wild type.The sterile lemma in the mutant spikelet was converted to a rudimentary glume-like organ.Our findings showed that the AGL1(also named LAX1)protein positively regulated G1 expression,and negatively regulated NSG1 expression,thereby affecting the fate of the sterile lemma.Taken together,our results revealed that AGL1 played a key role in negative regulation of grain size by controlling cell proliferation and expansion,and supported the opinion that rudimentary glume and sterile lemma in rice are homologous organs.

Revealing the grain size dependent hot workability and deformation mechanisms in a Mg-Zn-Y alloy

Despite the industrial significance of grain size for enhancing mechanical properties and formability,the in-depth deformation mechanisms at elevated temperature are still unclear.To investigate the functions of grain size on hot workability and deformation mechanisms,three groups of Mg-1.2Zn-0.2Y alloy specimens with different grain sizes were hot compressed and then studied by combining constitutive model,processing map and microstructural observations.The results showed that the enhanced hot workability accompanying low deformation activation energy and small instability regime was obtained with refined grain size.During hot deformation,the decreased grain size in Mg1.2Zn-0.2Y alloy mainly improved the plastic deformation homogeneity,especially for the weakened local straining around grain boundaries.As a result,the dynamic recrystallization nucleation and texture development at lower strain level were influenced by the initial grain size.At higher strain magnitude,the growth and coarsening of dynamic recrystallized grains would further release strain localization and improve hot workability,while the texture was less impacted.Further,unlike the primary basal slip and deformation twinning in the specimen with coarse grain at low temperature,non-basal slips of dislocations were initiated with less deformation twins in the specimens with refined grain size.

GL9 from Oryza glumaepatula controls grain size and chalkiness in rice

Grain size is a key factor influencing grain yield and appearance quality in rice.We identified twelve quantitative trait loci(QTL)for grain length(GL),nine for grain width(GW),and nine for 1000-kernel weight(TKW)using GLU-SSSLs,which are single-segment substitution lines with Oryza glumaepatula as donor parent and Huajingxian 74(HJX74)as recipient parent.Among the QTL,qGL1-2,qGL1-4,qGL9-2,qGW2-2,qGW9-1 and qTKW9-2 contributed to high grain yield.GL9 was identified as a candidate gene for qGL9-2 by map-based cloning and sequencing,and is a novel allele of GS9.The kernel of NIL-gl9was slenderer and longer than that of HJX74,and the TKW and grain yield per plant of NIL-gl9 were higher than those of HJX74.The proportion of grain chalkiness of NIL-gl9 was much lower than that of HJX74.Thus,gl9 increased grain yield and appearance quality simultaneously.Three pyramid lines,NIL-gs3/gl9,NIL-GW7/gl9 and NIL-gw8/gl9,were developed and the kernel of each was longer than that of the corresponding recipient parent lines.The gl9 allele may be beneficial for breeding rice varieties with high grain yield and good appearance quality.

Hydrogen-induced optical properties of FC/Pd/Mg films:Roles of grain size and grain boundary

Nanomodification is an effective method to solve the thermodynamic and kinetics limitation of Magnesium(Mg)-based materials,which shows promising application prospects in hydrogen energy field.However,the role of the grain size of pure Mg on the hydrogen-induced performance of the hydrogen sensitive thin film under cyclic hydrogen loading/unloading process at room temperature has rarely been studied systematically.To study the relationship between the structure of Mg layer and the hydrogen-induced optical performance of fluorocarbon(FC)/Pd/Mg films,a series of Mg with different internal structures were prepared by changing the velocity of sputtered atoms under different sputtering powers.The FC/Pd/Mg(40 W)film with fine nanostructure showed faster hydrogenation/dehydrogenation kinetics as well as a larger optical conversion range,which can be attributed to the large population of grain boundaries with high grain boundary energy and more hydrogen diffusion path.As sputtering power gradually increased from 40 W to 300 W,the grain inside films grew larger.The FC/Pd/Mg(300 W)film had more columnar-like regions inside and less grain boundaries with lower energy contributing to slower hydrogen absorption/desorption kinetics and lower optical conversion range.

A combined experimental and crystal plasticity study of grain size effects in magnesium alloys

This work presents a method to incorporate the micro Hall-Petch equation into the crystal plasticity finite element(CPFE) framework accounting for the microstructural features to understand the coupling between grain size, texture, and loading direction in magnesium alloys.The effect of grain size and texture is accounted for by modifying the slip resistances of individual basal and prismatic systems based on the micro Hall-Petch equation. The modification based on the micro Hall-Petch equation endows every slip system at each microstructural point with a slip system-level grain size and maximum compatibility factor, which are in turn used to modify the slip resistance. While the slip-system level grain size is a measure of the grain size, the maximum compatibility factor encodes the effect of the grain boundary on the slip system resistance modification and is computed based on the Luster-Morris factor. The model is calibrated using experimental stress-strain curves of Mg-4Al samples with three different grain sizes from which the Hall-Petch coefficients are extracted and compared with Hall-Petch coefficients predicted using original parameters from previous work. The predictability of the model is then evaluated for a Mg-4Al sample with different texture and three grain sizes subjected to loading in different directions. The calibrated parameters are then used for some parametric studies to investigate the variation of Hall-Petch slope for different degrees of simulated spread in basal texture,variation of Hall-Petch slope with loading direction relative to basal poles for a microstructure with strong basal texture, and variation of yield strength with change in grain morphology. The proposed approach to incorporate the micro Hall-Petch equation into the CPFE framework provides a foundation to quantitatively model more complicated scenarios of coupling between grain size, texture and loading direction in the plasticity of Mg alloys.

TATA-box binding protein-associated factor 2 regulates grain size in rice

Grain size,characterized by a combination of grain length,width,and thickness,is one of the major determinants of yield in rice.The present study identified TATA-box binding protein-associated factor 2(TAF2)as an essential component regulating transcription and determining grain size in rice.Map-based cloning showed that a G/T substitution in TAF2 resulted in a naturally occurring mutant called reduced grain size and plant height 1(rgh1).The mutants,with weak edited rgh1 alleles,exhibited a small grain phenotype with reduced grain length and width,while the severe knockout mutant(rgh1-2s)was dwarf and completely sterile.Allelic test performed between rgh1 and several edited alleles confirmed that the mutation in TAF2 caused the rgh1 phenotype.GUS staining showed that TAF2 was mainly expressed in the vascular bundles of roots,stems,leaves,and grains.The cytological analysis revealed that reduced cell division in the glumes resulted in the small grain phenotype of rgh1.Further RNA-sequencing detected altered expression of genes involved in the basic biological processes in rgh1 mutant.These findings provide novel insights into the TAF2-mediated genetic mechanism regulating grain size in rice.

GEOMETRIC MODEL AND APPLIED METHOD FOR THE CALCULATION OF GRAIN SIZE DISTRIBUTIONS

Most of the available methods for the calculation of the three dimensional(3D)grain size dis- tribution functions(SDF)are based on the S model and lead a grave systematical error.The origin is the basic supposition of spherical grains in the S model,which does not correspond with the feature of real grains.A new model called A model is developed based on the hypothe- sis of polvhedral grains.The probability functions of the A model and the method to calculate the 3D SDFs using the A model are given in the present paper.The theoretical analyses and experimental tests have demonstrated that the A model reduces the systematical error radical- ly.It is nearly as simple as the so far used S model,but gives much better results in repro- ducing of 3D SDFs from the measured ID or 2D SDFs.

Grain Size Control of Semisolid A356 Alloy Manufactured by Electromagnetic Stirring

To investigate the possibility of substituting the mechanical stirring system with electromagnetic stirring (EMS) system for aluminum rheo die-casting, the EMS under the different stirring cooling conditions was carried out. It was found that in the early period of solidification, the dendrite breakages led to a fine primary phase. When dendrites grew coarsely, the effect of ripening on grain size overwhelmed that of dendrite breakage. It was also found that the high cooling rate favored large nucleation rate, and led to a fine primary phase. But high cooling rate also made the growth rate of the dendrite arm, which prevented the dendrite arm from being sheared off. Therefore there were a suitable stirring time and suitable cooling rate to obtain the best rheo die-casting structure. Qualified semisolid A356 aluminum alloy was successfully manufactured with short time EMS.

The application of geostatistics in grain size trend analysis： A case study of eastern Beibu Gulf

There are 71 surface sediment samples collected from the eastern Beibu Gulf. The moment parameters （i.e. mean size, sorting and skewness） were obtained after applying grain size analysis. The geostatistical analysis was then applied to study the spatial autocorrelation for these parameters; while range, a parameter in the semivariogram that meters the scale of spatial autocorrelation, was estimated. The results indicated that the range for sorting coefficient was physically meaningful. The trend vectors calculated from grain size trend analysis model were consistent with the annual ocean circulation patterns and sediment transport rates according to previous studies. Therefore the range derived from the semivariogram of mean size can be used as the characteristic distance in the grain size trend analysis, which may remove the bias caused by the traditional way of basing on experiences or testing methods to get the characteristic distance. Hence the results from geostatistical analysis can also offer useful information for the determination of sediment sampling density in the future field work.

Grain Size and Wettability of TiO_2/SiO_2 Photocatalytic Composite Thin Filing

The uniform transparent TiO2/SiO2 photocatalytic composite thin films are prepared by sol-gel method on the soda lime glass substrates, and characterized by UV-visible spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), BET surface area, FTIR spectroscopy and X-ray photoelectron spectroscopy (XPS). It was found that the addition of SiO2 to TiO2 thin films can suppress the grain growth of TiO2 crystal, increase the hydroxyl content on the surface of TiO2 films, lower the contact angle for water on TiO, films and enhance the hydrophilic property of TiO2 films. The super-hydrophilic TiO2/SiO2 photocatalytic composite thin films with the contact angle of 0((o) under bar) are obtained by the addition of 10%-20% SiO2 in mole fraction.

Mechanical properties of Mg-8Gd-3Y-0.5Zr alloy with bimodal grain size distributions

The Mg-Gd-Y-Zn-Zr alloys are representational and potential age-hardening systems as reported in the past ten years,but their mechanical properties are still dependent on the grain size and its distribution.The effect of bimodal structure on mechanical properties of Mg-8Gd-3Y-0.5Zr alloy with bimodal grain size distributions was investigated.The results suggested that the volume fraction of fine grain(FG)and coarse grain(CG)could be controlled by combined processes of hot forging,extrusion and annealing.And for the present alloys with bimodal grain size distribution,the improvement of strength is still attributed to the grain refinement.The morphology of bimodal grain size distribution has a marked impact on the ductility of the alloy,i.e.with the increase of coarse grain volume fraction,the elongation to failure increases at the beginning and then decreases.The mechanism of the toughening effect of bimodal grain size distribution on the Mg-Gd-Y-Zn-Zr alloys with bimodal grain size structure has been discussed.

Spatial heterogeneity for grain size distribution of eolian sand soil on longitudinal dunes in the southern Gurbantunggut Desert

The grain size composition, distribution characteristics and spatial variation of eolian sand soil on distinct positions across two longitudinal dunes and interdune areas were studied by means of conventional grain size analysis and geostatistical methods. In the study, 184 samples of eolian sand soil from the 0-30cm layer were systemically collected and measured from two longitudinal dunes and interdunes in the southern Gurbantunggut Desert. The results show that the dominant grain sizes are fine and very fine sands, and the differences of grain size compositions between the distinct geomorphologic positions are significant. The contents of clay and silt are highest on the interdune areas and lowest on the crests, and higher on the leeward slopes than on the windward slopes. The contents of very fine and fine sands are highest on the windward slopes and lowest on the crests. The contents of medium, coarse and very coarse sands are lowest on the interdune lands, and highest on the crests, and are identical on the two slopes. The coarser sizes (phi(1)) and mean sizes (Mz) for eolian sand soil all have a varying tendency from fine to coarse sizes with interdune area -> leeward slope -> windward slope -> crest, and the sorting (sigma) are poorly to well sorted. The results of geostatistical analysis reveal that phi(1), Mz and a values are moderately to strongly spatially autocorrelated. The values of the spatially correlated ranges are phi(1) < sigma < Mz. The spatial variation for these grain size parameters is significant across the longitudinal dune landscape. From the crests towards the bottom of the slope, there is a varying gradient of zonal distribution, and the gradient values on the leeward slopes are larger than sites on the windward slopes.

Influence of bimodal grain size distribution on the corrosion behavior of friction stir processed biodegradable AZ31 magnesium alloy

In the present study,AZ31 magnesium alloy sheets were processed by friction stir processing(FSP)to investigate the effect of the grain refinement and grain size distribution on the corrosion behavior.Grain refinement from a starting size of 16.4±6.8µm to 3.2±1.2µm was attained after FSP.Remarkably,bimodal grain size distribution was observed in the nugget zone with a combination of coarse(11.62±8.4µm)and fine grains(3.2±1.2µm).Due to the grain refinement,a slight improvement in the hardness was found in the nugget zone of FSPed AZ31.The bimodal grain size distribution in the stir zone showed pronounced influence on the corrosion rate of FSPed AZ31 as observed from the immersion and electrochemical tests.From the X-ray diffraction analysis,more amount of Mg(OH)_(2) was observed on FSPed AZ31 compared with the unprocessed AZ31.Polarization measurements demonstrated the higher corrosion current density for FSPed AZ31(8.92×10^(−5)A/cm^(2))compared with the unprocessed condition(2.90×10^(−5)A/cm^(2))that can be attributed to the texture effect and large variations in the grain size which led to non-uniform galvanic intensities.

Grain Size and Photocatalytic Activity of Nanometer TiO_2 Thin Films Prepared by the Sol-gel Method

Transparent anatase TiO2 nanometer thin films with photocatalytic activity were prepared via the sol-gel method on soda-lime glass. The thickness , crystalline phase, grain size, surface hydroxyl amount and so on were characterized by scanning electron microscopy (SEM) , X-ray diffraction (XRD), transmission electron microscopy ( TEM), X-ray photoelectron spectroscopy (XPS) and UV-visible spectrophotometer ( UV-VIS). The photocatalytic activity of TiO2 thin films was evaluated for the photocatalytic decolorization of aqueous methyl orange . The effects of film thickness on the crystalline phase, grain size, transmittance and photocatalytic activity of nanometer Ti02 thin films were discussed.