A Binder of Phosphogypsum-Ground Granulated Blast Furnace Slag-Ordinary Portland Cement

A new hydraulic cementitious binder was developed by mainly utilizing industrial byproducts phosphogypsum（PG）and ground granulated blast furnace slag（GGBFS）with small addition of ordinary portland cement（OPC）.The hydration process and microstructure were studied by X-ray diffraction（XRD） and scanning electronic microscopy（SEM）.OPC hydrated first at early age to form primarily C-S-H gel,ettringite and calcium hydroxide（CH）.GGBFS activated by CH and sulfate ions hydrated continuously at later age,producing more and more hydration products,C-S-H gel and ettringite.Thus the paste developed a denser microstructure and its strength increased.The 28 d compressive strength of the mixture of 50%PG,46% GGBFS and 4%OPC exceeded 45 MPa.The setting time was faster and 3 d and 7 d strength were higher when the proportion of OPC increased.But the 28 d strength decreased when OPC exceeded 4%due to large amount of ettringite formed at late hydration age which damaged the microstructure.

Abrasion Resistance of Cement Paste with Granulated Blast Furnace Slag and Its Relations to Microhardness and Microstructure

The abrasion resistance of cement pastes with 30 wt%,40 wt%and 50 wt%granulated blast furnace slag(GBFS),and its relations to microhardness and microstructure like hydration products and pore structure were studied.Results indicated that GBFS decreased the abrasion resistance of paste,and among the pastes with GBFS,the paste with 40 wt%GBFS showed the highest abrasion resistance.The microhardness of GBFS was lower than that of the cement,and the microhardness of the hydration products in paste with GBFS was also lower than that of the hydration products in paste without GBFS,so that the abrasion resistance of paste decreased when GBFS was incorporated.The reason for the decrease of microhardness of pastes with GBFS was that the contents of Ca(OH)_(2)in pastes with GBFS was significantly lower than that in the paste without GBFS,while large amounts of calcium aluminate hydrates and hydrotalcite-like phases(HT)in pastes with GBFS were generated.Furthermore,among the pastes with GBFS,the paste with 40 wt%GBFS showed the lowest porosity which was the main reason for its highest abrasion resistance.

Effects of Al_2O_3 nanoparticles on properties of self compacting concrete with ground granulated blast furnace slag (GGBFS) as binder

In this work, strength assessments and percentage of water absorption of self compacting concrete containing ground granulated blast furnace slag （GGBFS） and A1203 nanoparticles as binder have been investigated. Portland cement was replaced by different amounts of GGBFS and the properties of concrete specimens were investigated. Although it negatively impacts the physical and mechanical properties of concrete at early ages of curing, GGBFS was found to improve the physical and mechanical properties of concrete up to 45 wt% at later ages. A1203 nanoparticles with the average particle size of 15 nm were added partially to concrete with the optimum content of GGBFS and physical and mechanical properties of the specimens were measured. A1203 nanoparticle as a partial replacement of cement up to 3.0 wt% could accelerate C-S-H gel formation as a result of increased crystalline Ca（OH）2 amount at the early ages and hence increase strength and improve the resistance to water permeability of concrete specimens. The increase of the A1203 nanoparticles＇ content by more than 3.0 wt% would cause the reduction of the strength because of the decreased crystalline Ca（OH）2 content required for C-S-H gel formation. Several empirical relationships have been presented to predict flexural and split tensile strength of the specimens by means of the corresponding compressive strength at a certain age of curing. Accelerated peak appearance in conduction calorimetry tests, more weight loss in thermogravimetric analysis and more rapid appearance of the peaks related to hydrated products in X-ray diffraction results, all indicate that A1203 nanoparticles could improve mechanical and physical properties of the concrete specimens.

TiO_2 nanoparticles' effects on properties of concrete using ground granulated blast furnace slag as binder

In the present study, compressive strength, pore structure, thermal behavior and microstrncture characteristics of concrete containing ground granulated blast furnace slag and TiO2 nanoparticles as binder were investigated. Portland cement was replaced by different amounts of ground granulated blast furnace slag and the properties of concrete specimens were investigated. Al- though it negatively impacts the properties of concrete at early ages, ground granulated blast furnace slag up to 45 wt% was found to improve the physical and mechanical properties of concrete at later ages. TiO2 nanoparticles with the average particle size of 15 nm were partially added to concrete with the optimum content of ground granulated blast furnace slag and physical and mechanical properties of the specimens were measured. TiO2 nanoparticle as a partial replacement of cement up to 3 wt% could accelerate C-S-H gel formation as a result of increased crystalline Ca（OH）2 amount at the early age of hydration and hence increase compressive strength of concrete. The increased TiO2 nanoparticles＇ content of more than 3 wt% may cause reduced compressive strength because of the decreased crystalline Ca（OH）2 content required for C-S-H gel formation and unsuitable dispersed nanoparticles in the concrete matrix. TiO2 nanoparticles could improve the pore structure of concrete and shift the distributed pores to harmless and less-harm pores.

Clayey soil stabilization using alkali-activated volcanic ash and slag

Lime and Portland cement are the most widely used binders in soil stabilization projects.However,due to the high carbon emission in cement production,research on soil stabilization by the use of more environmentally-friendly binders with lower carbon footprint has attracted much attention in recent years.This research investigated the potential of using alkali-activated ground granulated blast furnace slag(GGBS)and volcanic ash(VA)as green binders in clayey soil stabilization projects,which has not been studied before.The effects of different combinations of VA with GGBS,various liquid/solid ratios,different curing conditions,and different curing periods(i.e.7 d,28 d and 90 d)were investigated.Compressive strength and durability of specimens against wet-dry and freeze-thaw cycles were then studied through the use of mechanical and microstructural tests.The results demonstrated that the coexistence of GGBS and VA in geopolymerization process was more effective due to the synergic formation of N-A-S-H and C-(A)-S-H gels.Moreover,although VA needs heat curing to become activated and develop strength,its partial replacement with GGBS made the binder suitable for application at ambient temperature and resulted in a remarkably superior resistance against wet-dry and freeze-thaw cycles.The carbon embodied of the mixtures was also evaluated,and the results confirmed the low carbon footprints of the alkali-activated mixtures.Finally,it was concluded that the alkali-activated GGBS/VA could be promisingly used in clayey soil stabilization projects instead of conventional binders.

Properties and Mechanism on Flexural Fatigue of Polypropylene Fiber Reinforced Concrete Containing Slag

Properties and mechanism were investigated on flexural fatigue of concrete containing polypropylene fibers and ground granulated blast furnace slag（GGBFS）.Four polypropylene fibers’volume fractions and five slag proportions were considered.An experiment was conducted to obtain the fatigue lives at three stress levels in 20 Hz frequency and at a constant stress level of 0.59 in four frequency respectively.Mechanism and evaluation were investigated based on the experimental data.Fatigue life span models were established.The results show that the addition of polypropylene fibers improves the flexural fatigue cumulative strength and fatigue life span.It is proposed that the slag particles and hydrated products improve Interfacial Transition Zone（ITZ）structure and benefit flexural fatigue performance.A composite reinforce effect is found with the incorporation of slag and polypropylene fibers.The optimum mixture contents 55%slag with 0.6%polypropylene fiber for the cumulative fatigue stress.Fatigue properties are decreased as the stress level increasing,the higher frequency reduces the fatigue strength more than lower frequency at a constant stress level.

Optimum Level of Replacement Slag in OPC-Slag Mortars

The present paper reports the testing of 14 OPC-slag mortars and 2 controls OPC and slag mortars. The main aim is to determine the optimum level of replacement slag for achievement to the highest early strength with reasonable flow. Variable was the level of GGBFS in the binder. In this experimental work, two types of sands were used that are： silica and mining sands. It is determined that the optimum level of replacement slag is 40% and use of silica sand in OPC is preferable to mining sand and reversely, use of mining sand is preferred in GG100 to silica sand. All mortars had W/B and S/B 0.33 and 2.25, respectively.

Effects of Steel Slag Powder on Workability and Durability of Concrete

The workability and durability of a type of sustainable concrete made with steel slag powder were investigated. The hydrated products of cement paste with ground granulated blast furnace slag（GGBFS） alone or with a combined admixture of GGBFS-steel slag powder were investigated by X-ray diffraction（XRD）. Furthermore, the mechanism of chemically activated steel slag powder was also studied. The experimental results showed that when steel slag powder was added to concrete, the slumps through the same time were lower. The initial and fi nal setting times were slightly retarded. The dry shrinkages were lower, and the abrasion resistance was better. The chemically activated steel slag powder could improve compressive strengths, resistance to chloride permeation and water permeation, as well as carbonization resistance. XRD patterns indicated that the activators enhanced the formation of calcium silicate hydrate（C-S-H） gel and ettringite（AFt）. This research contributes to sustainable disposal of wastes and has the potential to provide several important environmental benefi ts.

The Preparation of Porous Activated Slag Granules/TiO_(2)Photocatalyst and Its De-NO_(x)Performance

The porous structure and honeycombed structure of granulated blast furnace slag formed by alkali activation(AGBFS)can be used as a promising photocatalysts substrate for the photocatalytic removal of atmospheric or water pollutants.In this study,photocatalytic activated slag granules were synthesized by loading TiO_(2)on AGBFS with immersion method.The physicochemical properties and NO_(x)removal performance of activated slag granules/TiO_(2)photocatalysts were studied by X-ray diffraction(XRD),scanning electron microscope(SEM)and photocatalytic performance test.The effects of slag particle sizes and nano-TiO_(2)loading concentrations on photocatalytic efficiencies of NO_(x)removal were also investigated.It was found that the De-NO_(x)performance of activated slag granules/TiO_(2)photocatalyst increased with the increasing of slag particle size in low TiO_(2)loading concentration situation,while increasing the TiO_(2)loading concentration would result in the opposite De-NO_(x)performance as slag size increased.Nevertheless,for the same size activated slag,the photocatalytic efficiency of activated slag granules/TiO_(2)photocatalyst gradually improved with the increase of loading concentration of TiO_(2).

Evaluating Simultaneous Impact of Slag and Tire Rubber Powder on Mechanical Characteristics and Durability of Concrete

In this experimental study,the impact of Portland cement replacement by ground granulated blast furnace slag(GGBFS)and micronized rubber powder(MRP)on the compressive,flexural,tensile strengths,and rapid chloride migration test(RCMT)of concrete were assessed.In this study,samples with different binder content and water to binder ratios,including the MRP with the substitution levels of 0%,2.5%and 5%,and the GGBFS with the substitution ratios of 0%,20%and 40%by weight of Portland cement were made.According to the results,in the samples containing slag and rubber powder in the early ages,on average,a 12.2%decrease in the mechanical characteristics of concrete was observed,nonetheless with raising the age of the samples,the impact of slag on reducing the porosity of concrete lowered the negative impact of rubber powder.Regarding durability characteristics,the RCMT results of the samples were enhanced by using rubber powder because of its insulation impact.Moreover,adding slag into the MRP-included mixtures results in a 23%reduction in the migration rate of the chloride ion averagely.At last,four mathematical statements were derived for the mechanical and durability of concrete containing the MRP and GGBFS utilizing the genetic programming method.

APPLICATION OF SLAG HIGH PERFORMANCE CONCRETE (SHPC) IN A CAR PARKING BUILDING

Using ground granulated blast furnace slag as the active stuff of high performance concrete (HPC), the C60 SHPC was prepared. The behaviour of the C60 SHPC and its application in the Car Parking Building of Beijing Capital International Airport were described. Also, the manufacturing techniques of reducing cement consumption, lowering hydration heat, minimizing shrinkage cracks and improving durability of the C60 SHPC were discussed. (Author abstract) 3 Refs.

Incorporation of a nanotechnology-based additive in cementitious products for clay stabilisation

The mechanical performances and water retention characteristics of clays,stabilised by partial substitution of cement with by-products and inclusion of a nanotechnology-based additive called RoadCem(RC),are studied in this research.The unconfined compression tests and one-dimensional oedometer swelling were performed after 7 d of curing to understand the influence of addition of 1%of RC material in the stabilised soils with the cement partially replaced by 49%,59%and 69%of ground granulated blast furnace slag(GBBS)or pulverised fuel ash(PFA).The moisture retention capacity of the stabilised clays was also explored using the soil-water retention curve(SWRC)from the measured suctions.Results confirmed an obvious effect of the use of RC with the obtained strength and swell properties of the stabilised clays suitable for road application at 50%replacement of cement.This outcome is associated with the in-depth and penetrating hydration of the cementitious materials by the RC and water which results in the production of needle-like matrix with interlocking filaments e a phenomenon referred to as the‘wrapping’effect.On the other hand,the SWRC used to describe the water holding capacity and corresponding swell mechanism of clays stabilised by a proportion of RC showed a satisfactory response.The moisture retention of the RC-modified clays was initially higher but reduced subsequently as the saturation level increased with decreasing suction.This phenomenon confirmed that clays stabilised by including the RC are water-proof in nature,thus ensuring reduced porosity and suction even at reduced water content.Overall,the stabilised clays with the combination of cement,GGBS and RC showed a better performance compared to those with the PFA included.

Effect of Content and Fineness of GGBS on Pore Structure of Cement Paste

The effect of the content and specific surface area of the ground granulated blast furnace slag (GGBS) on the pore structure of the cement paste was determined through the low-field nuclear magnetic resonance (NMR).The Pearson correlation analysis method was used to calculate the correlation coefficient between the porosity and age of cement paste,the specific surface area of GGBS and the content of GGBS.The test results exhibited that the porosity of the cement paste with different ageing durations gradually decreased on increasing the content and specific surface area of GGBS.The content and specific surface area of GGBS had a negligible effect on the 1-10 nm size gel pores in the cement paste,whereas,had a significant effect on the 10-100 nm size capillary pores.In addition,these parameters did not affect the final most probable pore size of the cement paste.The correlation between age and porosity was the largest,and the correlation between GGBS content and porosity was greater than that between GGBS specific surface area and porosity.Moreover,a modified pore structure model was successfully developed to effectively predict the pore structure of the GGBS based cement paste.

Effect of GGBS on performance deterioration of non-dispersible underwater concrete in saline soil

In saline soil areas,there are a large number of ions in soil or water environments,such as Cl^(-)and SO_(4)^(2-),which have strong corrosive interactions with buildings.To study the deterioration of non-dispersible underwater concrete in sulfate,chloride,and mixed salt environments,the compressive strength and deterioration resistance coefficient of the studied concrete mixed with different amounts of ground granulated blast-furnace slag(GGBS)were analyzed in this paper.At the same time,the micro morphology and corrosion products distribution of the studied concrete were observed by means of SEM,plus XRD diffraction,TG-DTG and FT-IR analyses to explore the influence of corrosive solutions on the hydration products of concrete.We also analyzed the mechanism of improving the deterioration resistance of the studied concrete by adding GGBS in a saline soil environment.The results show that the compressive strength of the studied concrete in a chloride environment was close to that in a fresh water environment,which means that chloride has no adverse effect on compressive strength.The deterioration of the studied concrete was most serious in a sulfate environment,followed by mixed salt environment,and the lowest in a chloride environment.In addition,by adding GGBS,the compressive strength and deterioration resistance of the studied concrete could be effectively improved.

Performance of Bacillus tropicus on Mechanical,Durable and Crack Remediation Properties in Sustainable Vermiculite Concrete

Sustainable cement-based concrete materials are primarily used for construction,among which vermiculite as lightweight fine aggregate gains more future development prospect.First,a bacterial solution was sprayed over vermiculite and wrapped using calcium sulphoaluminate(CSA)cement to replace with fine aggregate in concrete.Secondly,based on a preliminary test on compressive strength results,10%of Ground Granulated Blast Furnace Slag(GGBS)and a healing solution proportion of 9:1 was selected for preparing self-healing concrete.The fine aggregate was replaced in concrete using vermiculite in 0%,5%,10%and 15%and the findings suggest that bacterial vermiculite replacement should be at most 5%to achieve better results in strength and durable properties.The strength enhancement observed for compressive strength,strength regain,split tensile strength,flexural strength,and ultrasonic pulse velocity were 29.22%,45.5%,34.02%,28.03%and 41.4%respectively.Surface crack healing at 7,14 and 28 days of BIVC was 38.23%,58.82%and 79.41%,which is 3–4%lower than internal crack healing.Microstructural analysis by Scanning Electron Microscopy(SEM),X-Ray Diffractometer(XRD),and Energy Dispersive Spectroscopy(EDS)reveals the existence of calcite,and it was formed due to the bio-mineral action of bacteria with available nutrients in sustainable concrete.

Characteristics of two types of C-S-H gel in hardened complex binder pastes blended with slag

The characteristics of C-S-H gel in hardened Portland cement pastes and complex binder pastes with ground granulated blast furnace slag were investigated with nanoindentation. The composition of C-S-H gel was analysed with SEM-EDS. The obtained results showed that the volume fraction of LD C-S-H gradually reduced and the volume fraction of HD C-S-H increased with the prolongation of hydration age. Most of the C-S-H gel produced at later age was HD C-S-H. The volume fraction of HD C-S-H increased as the fraction of slag in complex binder pastes increased, suggesting that HD C-S-H was mainly in the hydration products of slag. The chemichal compositions of the two types of C-S-H gel were simlar, meaning that formation and transformation of the two types of C-S-H gel were not affected by their Ca/Si ratio.

Effect of mineral admixtures and repeated loading on chloride migration through concrete

The effect of fly ash (FA) and ground granulated blast furnace slag (GGBFS) on chloride migration through concrete subjected to repeated loading was examined. Portland cement was replaced by three percentages (20%, 30%, and 40%) of mineral admixtures. Five repeated loadings were applied to concrete specimens using a WHY series fully automatic testing machine. The maximum loadings were 40% and 80% of the axial cylinder compressive strength (f′c). Chloride migration through concretes was evaluated using the rapid chloride migration test and the chloride concentration in the anode chamber was measured. The results showed that the replacement percentages of mineral admixtures, the curing time and repeated loading had a significant effect on chloride migration through concrete. The transport number of chloride through concrete cured for 28 d increased with increasing FA replacement and markedly decreased with extension of the curing time. 20% and 30% GGBFS replacement decreased the transport number of chloride through concrete, but 40% GGBFS replacement increased the transport number. Five repeated loadings at 40% or 80% f′c increased the transport number of chloride for all mixes.