Synthesis of Graphene Oxide (GO) by Modified Hummers Method and Its Thermal Reduction to Obtain Reduced Graphene Oxide (rGO)

Over the span of years, improvements over various synthesis methods of graphene are constantly pursued to provide safer and more effective alternatives. Though the extraction of graphene through Hummers method is one of the oldest techniques yet it is one of the most suitable methods for the formation of bulk graphene. Graphene can be obtained in the form of reduced Graphite oxide, sometimes also referred as Graphene oxide. The effectiveness of this oxidation process can be evaluated by the magnitude of carbon/oxygen ratio of the obtained graphene. Here, graphene oxide (GO) was prepared by oxidizing the purified natural flake graphite (NFG) by a modified Hummers method. The attempts have been made to synthesize GO having few layers by using a modified Hummers method where the amount of NaNO3 has been decreased, and the amount of KMnO4 is increased. The reaction has been performed in a 9:1 (by volume) mixture of H2SO4/H3PO4. This modification is successful in increasing the reaction yield and reducing the toxic gas evolution while using a varied proportion of KMnO4 and H2SO4 as those required by Hummers method. A new component of K2S2O8 has been introduced to the reaction system to maintain the pH value. Reduced graphene oxide (rGO) was thereafter extracted by thermal modification of GO. Here, GO has been used as a precursor for graphene synthesis by thermal reduction processes. The results of FTIR and Raman spectroscopy analysis show that the NFG when oxidized by strong oxidants like KMnO4 and NaNO3, introduced oxygen atoms into the graphite layers and formed bonds like C=O, C-H, COOH and C-O-C with the carbon atoms in the graphite layers. The structure and morphology of both GO and rGO were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared spectroscopy (FTIR), ultraviolet-visible spectroscopy, Raman spectroscopy, Brunauer-Emmett-Teller (BET) surface area analysis and differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA).

A green cross-linking method for the preparation of renewable threedimensional graphene sponges for efficient adsorption of Congo red dye

Graphene-based materials possess significant potential for the treatment of dye wastewater due to their exceptional adsorption properties toward stubborn pollutants.However,their utilization is hindered by high preparation costs,low yields,environmental pollution during synthesis,and challenges in regenerating the adsorbent.This study proposes a novel approach to address these limitations by developing nitrogen-doped three-dimensional(3D)polyvinyl alcohol(PVA)crosslinked graphene sponges(N-PGA)using a cross-linking method with ammonium carbonate.This method offers a relatively mild,environmentally friendly approach.Ammonium carbonate serves as both a reducing and modifying agent,facilitating the formation of the intrinsic structure of N-PGA and acting as a nitrogen source.Meanwhile,PVA is utilized as the cross-linking agent.The results demonstrate that N-PGA exhibits a favorable internal 3D hierarchical porous structure and possesses robust mechanical properties.The measured specific surface area(BET)of N-PGA was as high as406.538 m^(2)·g^(-1),which was favorable for its efficient adsorption of Congo red(CR)dye molecules.At an initial concentration of 50 mg·L^(-1),N-PGA achieved an impressive removal rate of 89.6%and an adsorption capacity of 112 mg·g^(-1)for CR dye.Furthermore,it retained 79%of its initial adsorption capacity after 10 cycles,demonstrating excellent regeneration performance.In summary,the synthesized N-PGA displays remarkable efficacy in the adsorption of CR dye in wastewater,opening up new possibilities for utilizing 3D porous graphene nanomaterials as efficient adsorbents in wastewater treatment.

Effects of modified graphene oxide(GO) nanofluid on wettability and IFT changes: Experimental study for EOR applications

The application of nanoparticles(NPs) in enhanced oil recovery(EOR) offers a practical approach to resolving some surface-related problems encountered in contemporary technological processes. In this study, graphene oxide nanosheets(GONs) were synthesized by Hummer's method and, then, were subjected to surface modification by hexamethyldisilazane(HMDS) and diazonium sulfonic(DS) compounds. The new combination was known as GO-Su-HMDS. The potential stability of GO-Su-HMDS nanofluids(NFs) was investigated using the zeta(ζ) potential test. A comparative study of the effect of the synthesized NFs on wettability alteration of the reservoir rock was performed using interfacial tension(IFT) and contact angle experiments. According to the results of this study, the contact angle decreased from the initial value of 161.(oil wet) to 35.(water wet). In addition, IFT decreased from18.45 mN/m for deionized(DI) water to 8.8 mN/m for 500 ppm GO-Su-HMDS NF. Moreover, the results of flooding experiments showed that the NPs of a GO-Su-HMDS concentration of 400 and 500 ppm could increase the oil recovery by 20% and 19%, respectively. The experimental results showed that GO-SuHMDS NFs with a concentration of 500 ppm have the best efficiency in terms of altering the wettability of the rock from oil wet to water wet. Thus, it can be said that this nanofluid can reduce the contact angle and IFT and also increase the sweeping efficiency of oil.

Fabrication of a novel electrochemical sensor based on MnFe_(2)O_(4)/graphene modified glassy carbon electrode for the sensitive detection of bisphenol A

Manganese ferrite(MnFe_(2)O_(4))has the advantages of simple preparation,high resistivity,and high crystal symmetry.Herein,we have developed an electrochemical sensor utilizing graphene and MnFe_(2)O_(4) nanocomposites modified glassy carbon electrode(GCE),which is very efficient and sensitive to detect bisphenol A(BPA).MnFe_(2)O_(4)/graphene(GR)was synthesized by immobilizing the MnFe_(2)O_(4) microspheres on the graphene nanosheets via a simple one-pot solvothermal method.The morphology and structure of the MnFe_(2)O_(4)/GR nanocomposite have been characterized through scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FT-IR),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).In addition,electrochemical properties of the modified materials are comparably explored by means of cyclic voltammetry(CV),electrochemical impedance spectroscopy(EIS)and differential pulse voltammetry(DPV).Under the optimal conditions,the proposed electrochemical sensor for the detection of BPA has a linear range of 0.8-400μmol/L and a detection limit of 0.0235μmol/L(S/N=3)with high sensitivity,good selectivity and high stability.In addition,the proposed sensor was used to measure the content of BPA in real water samples with a recovery rate of 97.94%-104.56%.At present,the synthesis of MnFe_(2)O_(4)/GR provides more opportunities for the electrochemical detection of BPA in practical applications.

S-doped mesoporous graphene modified separator for high performance lithium-sulfur batteries

Due to their low cost,environmental friendliness and high energy density,the lithium-sulfur batteries(LSB)have been regarded as a promising alternative for the next generation of rechargeable battery systems.However,the practical application of LSB is seriously hampered by its short cycle life and high self-charge owing to the apparent shuttle effect of soluble lithium polysulfides.Using MgSO_(4)@MgO composite as both template and dopant,template-guided S-doped mesoporous graphene(SMG)is prepared via the fluidized-bed chemical vapor deposition method.As the polypropylene(PP)modifier,SMG with high specific surface area,abundant mesoporous structures and moderate S doping content offers a wealth of physical and chemical adsorptive sites and reduced interfacial contact resistance,thereby restraining the serious shuttle effects of lithium polysulfides.Consequently,the LSB configured with mesoporous graphene(MG)as S host material and SMG as a separator modifier exhibits an enhanced electrochemical performance with a high average capacity of 955.64 mA h g^(-1) at 1C and a small capacity decay rate of 0.109%per cycle.Additionally,the density functional theory(DFT)calculation models have been rationally constructed and demonstrated that the doped S atoms in SMG possess higher binding energy to lithium polysulfides than that in MG,indicating that the SMG/PP separator can effectively capture soluble lithium polysulfides via chemical binding forces.This work would provide valuable insight into developing a versatile carbon-based separator modifier for LSB.

Overoxidized poly(3,4-ethylenedioxythiophene)-gold nanoparticles-graphene-modified electrode for the simultaneous detection of dopamine and uric acid in the presence of ascorbic acid

An innovative,ternary nanocomposite composed of overoxidized poly(3,4-ethylenedioxythiophene)(OPEDOT),gold nanoparticles(Au NPs),and electrochemically reduced graphene oxide(ERGO)was prepared on a glassy carbon electrode(GCE)(OPEDOT-Au NPs-ERGO/GCE)through homogeneous chemical reactions and heterogeneous electrochemical methods.The morphology,composition,and structure of this nanocomposite were characterized by transmission electron microscopy,scanning electron microscopy,X-ray diffraction,and X-ray photoelectron spectroscopy.The electrochemical properties of the OPEDOT-Au NPs-ERGO/GCE were investigated by cyclic voltammetry using potassium ferricyanide and hexaammineruthenium(III)chloride redox probe systems.This modified electrode shows excellent electro-catalytic activity for dopamine(DA)and uric acid(UA)under physiological p H conditions,but inhibits the oxidation of ascorbic acid(AA).Linear voltammetric responses were obtained when DA concentrations of approximately 4.0-100μM and UA concentrations of approximately 20-100μM were used.The detection limits(S/N=3)for DA and UA were 1.0 and 5.0μM,respectively,under physiological conditions and in the presence of 1.0 m M of AA.This developed method was applied to the simultaneous detection of DA and UA in human urine,where satisfactory recoveries from 96.7%to 105.0%were observed.This work demonstrates that the developed OPEDOT-Au NPs-ERGO ternary nanocomposite,with its excellent ion-selectivity and electro-catalytic activity,is a promising candidate for the simultaneous detection of DA and UA in the presence of AA in physiological and pathological studies.

Analysis of quality-related proteins in golden pompano(Trachinotus ovatus)fillets with modified atmosphere packaging under superchilling storage

Here,we aimed to study the changes in proteome of golden pompano fillets during post-mortem storage.Tandem mass tags(TMT)-labeled quantitative proteomic strategy was applied to investigate the relationships between protein changes and quality characteristics of modified atmosphere packaging(MAP)fillets during superchilling(-3°C)storage.Scanning electron microscopy was used to show that the muscle histology microstructure of fillets was damaged to varying degrees,and low-field nuclear magnetic resonance was used to find that the immobilized water and free water in the muscle of fillets changed significantly.Total sulfhydryl content,TCA-soluble peptides and Ca2+-ATPase activity also showed that the fillet protein had a deterioration by oxidation and denaturation.The Fresh(FS),MAP,and air packaging(AP)groups were set.Total of 150 proteins were identified as differential abundant proteins(DAPs)in MAP/FS,while 209 DAPs were in AP/FS group.The KEGG pathway analysis indicated that most DAPs were involved in binding proteins and protein turnover.Correlation analysis found that 52 DAPs were correlated with quality traits.Among them,8 highly correlated DAPs are expected to be used as potential quality markers for protein oxidation and water-holding capacity.These results provide a further understanding of the muscle deterioration mechanism of packaging golden pompano fillets during superchilling.

Bifurcation and Turing Pattern Formation in a Diffusion Modified Leslie-Gower Predator-Prey Model with Crowley-Martin Functional Response

In this paper, we study a modified Leslie-Gower predator-prey model with Smith growth subject to homogeneous Neumann boundary condition, in which the functional response is the Crowley-Martin functional response term. Firstly, for ODE model, the local stability of equilibrium point is given. And by using bifurcation theory and selecting suitable bifurcation parameters, we find many kinds of bifurcation phenomena, including Transcritical bifurcation and Hopf bifurcation. For the reaction-diffusion model, we find that Turing instability occurs. Besides, it is proved that Hopf bifurcation exists in the model. Finally, numerical simulations are presented to verify and illustrate the theoretical results.

Nucleoside modified mRNA-lipid nanoparticles as a new delivery platform for the repair of the injured spinal cord

Spinal cord injury and treatment opportunities:The adult mammalian spinal cord has a very limited capacity for spontaneous regeneration due to various intrinsic molecular and cellular factors.Although the spinal cord neurons have the capacity to regenerate their axons,the expression of growth inhibitory factors,lack or suppression of proper guidance cues,and profound inflammatory responses do not permit successful regeneration(Khyeam et al.,2021).

Advances in Graphene‑Based Electrode for Triboelectric Nanogenerator

With the continuous development of wearable electronics,wireless sensor networks and other micro-electronic devices,there is an increasingly urgent need for miniature,flexible and efficient nanopower generation technology.Triboelectric nanogenerator(TENG)technology can convert small mechanical energy into electricity,which is expected to address this problem.As the core component of TENG,the choice of electrode materials significantly affects its performance.Traditional metal electrode materials often suffer from problems such as durability,which limits the further application of TENG.Graphene,as a novel electrode material,shows excellent prospects for application in TENG owing to its unique structure and excellent electrical properties.This review systematically summarizes the recent research progress and application prospects of TENGs based on graphene electrodes.Various precision processing methods of graphene electrodes are introduced,and the applications of graphene electrode-based TENGs in various scenarios as well as the enhancement of graphene electrodes for TENG performance are discussed.In addition,the future development of graphene electrode-based TENGs is also prospectively discussed,aiming to promote the continuous advancement of graphene electrode-based TENGs.

Electrochemical Degradation of Indigocarmine Dye at Ni/Graphite Modified Electrode in Aqueous Solution

Nickel Graphite modified electrode (Ni/GME) was prepared by electrochemical method and degradation of Indigocarmine (IC) dye was carried out. An investigation between the efficiency of degradation by graphite electrode and the Ni/graphite modified electrode has been carried out. The different effects of concentration, current density and temperature on the rate of degradation were studied. This study shows that the rate of the degradation is more for Ni doped modified graphite electrode. UV-Visible spectra before and after degradation of the dye solution were observed. The thin film formation of Ni or encapsulated in graphite rod is observed by scanning electron microscopy and energy dispersive X-ray spectroscopy (SEM & EDAX). The instantaneous current effectiveness values of different experimental conditions are evaluated. The anodic oxidation by Ni/ graphite modified electrode showed the complete degradation of aqueous solution indigocarmine, which is confirmed by UV-Visible and chemical oxygen demand (COD) measurements. The dye is converted into CO2, H2O and simpler inorganic salts. The results observed for reuse of modified electrodes indicate that the Ni/graphite modified electrode would be a promising anode for electrochemical degradation of indigocarmine. This method can be applied for the remediation of waste water containing organics, cost-effective and simple.

High Temperature Rheological Performance of Graphene Modified Rubber Asphalt

To elucidate the high temperature rheological capability of graphene modified rubber asphalt,three contents of graphene and crumb rubber were prepared by a combination of mechanical agitation and high speed shearing machine,then used dynamic shear rheological test(DSR)and multiple stress creep recovery(MSCR)tests to evaluate.The hardness and softening point with rotational viscosity of samples raised with the addition of graphene,especially the addition of 0.04%.Dynamic shear rheological test revealedthat the dynamic shear modulus G*,rutting factor G*/Sin δ,and zero shear viscosity(ZSV)of graphene-modified rubber asphalt were greatly influenced along with graphene-increased,on the contrary,phase angle δ which characterize the viscoelastic ratio of asphalt decreased.Multiple stress creep recovery(MSCR)tests showed that the graphene-enhanced rubber asphalt had high-temperature stability through non-recoverable creep compliance(Jnr).Based on these findings,graphene-modified rubber asphalt binders with the addition of 0.04% graphene had good viscoelastic properties as well as high temperature rutting resistance performance.In the meantime,G*/Sin δ,ZSV,and Jnr100,Jnr3200 have good correlation,which can reveal the excellent high-temperature stability performance of asphalt.

Graphene-gold Nanoparticle Composite Film Modified Electrode for Determination of Trace Mercury in Environmental Water

The graphene-gold nanoparticles composite film modified glassy carbon electrode （EG- AuNPs/GCE） was prepared by one-step coelectrodeposition and employed for determination of trace mercury in environmental water with differential pulse stripping voltammetry. Such a nanostructured composite film combined with the advantages of gold nanoparticles and graphene, can greatly promote the electron-transfer process and increase accumulation abil-ity for Hg（Ⅱ）, leading to a remarkably improved sensitivity. The linear calibration curve ranged from 0.2 μg/L to 30 μg/L for Hg（Ⅱ） and the detection limit （S/N=3） was found to be 0.03 μg/L at a deposition time of 300 s. Moreover, the stablity of the as-prepared electrode and interferences from other substances were evaluated. The modified electrode was successfully applied to the direct detection of Hg（Ⅱ） in real water samples.

Application of SAGE algorithm in PET image reconstruction using modified ordered subsets

A new method that uses a modified ordered subsets （MOS） algorithm to improve the convergence rate of space-alternating generalized expectation-maximization （SAGE） algorithm for positron emission tomography （PET） image reconstruction is proposed.In the MOS-SAGE algorithm,the number of projections and the access order of the subsets are modified in order to improve the quality of the reconstructed images and accelerate the convergence speed.The number of projections in a subset increases as follows：2,4,8,16,32 and 64.This sequence means that the high frequency component is recovered first and the low frequency component is recovered in the succeeding iteration steps.In addition,the neighboring subsets are separated as much as possible so that the correlation of projections can be decreased and the convergences can be speeded up.The application of the proposed method to simulated and real images shows that the MOS-SAGE algorithm has better performance than the SAGE algorithm and the OSEM algorithm in convergence and image quality.

N-RGO/CNT纤维的制备及其在电容器中的应用

以大鳞片石墨为原料,经过氧化插层、剥离和湿法纺丝等步骤,结合碳纳米管引入、还原方式选择和氮掺杂技术,成功制备了介孔结构规则排列的氮掺杂还原氧化石墨烯/碳纳米管(Nitrogen-doped reduced graphene oxide/carbon nanotube,N-RGO/CNT)复合纤维。对比了不同还原方式对纤维微观结构的影响,发现氢碘酸(HI)化学还原导致纤维结构的大孔膨胀,而焦耳热/微波还原使其孔结构连续且规则化,特别是碳纳米管的引入显著改善了纤维的微观形貌,形成了多孔海绵状结构,且孔结构主要为有序的三维介孔。通过焦耳热/微波还原方式制备的N-RGO/CNT复合纤维在抗拉强度、导电率和比表面积等物理性能上表现优异,其中抗拉强度达到252 MPa,导电率为7.9·10^(3) S·m^(-1),比表面积为194 m^(2)·g^(-1)。进一步测试发现,适度还原的纤维因保留了一定含氧基团,通过参与氧化还原反应显著提升了纤维的比容量。在三电极体系中,N-RGO/CNT纤维可提供高达300 F·cm^(-3)的比容量。以N-RGO/CNT纤维为电极材料组装的超级电容器在电流密度为34.0 mA·cm^(-3)时表现出198 F·cm^(-3)的电容。

基于GO/Mxene复合材料的柔性LC无线湿度传感器研究

针对当前湿度传感器在检测范围、灵敏度等方面的不足及实际应用中对无源感知、可弯折能力等的需求,本文对基于GO/Mxene复合材料的柔性LC无线湿度传感器进行了研究。对传感器原理进行分析,设计了一个以聚酰亚胺为基底的柔性叉指电极天线,该天线谐振频率为146 MHz,并利用仿真软件得到了天线上的电场分布。制备了GO/Mxene复合材料,使用扫描电子显微镜和能谱分析仪对GO/MXene复合材料的表面形貌和微观结构等进行了表征,验证了复合材料的结构与组成元素。将所制备的复合材料作为湿度敏感材料置于天线上场强最强处完成了湿度传感器的制作。对传感器性能进行了测试,测试表明该传感器具有较高的灵敏度,在20~70%RH的相对湿度范围内,传感器的灵敏度达到了90.51 kHz/%RH,在70~95%RH的相对湿度范围内,灵敏度达到了651.86 kHz/%RH。同时该传感器的稳定性和响应时间性能良好,可实现人体呼吸监测,在健康检测、机器人皮肤等领域具有一定的应用前景。

rGO/PANI对Cr(Ⅵ)的吸附还原性能及机理分析

以还原氧化石墨烯(rGO)为载体,采用原位聚合法将聚苯胺(PANI)负载到rGO上以增大其比表面积,探究复合材料对溶液中Cr(Ⅵ)的吸附还原反应效果。采用SEM、XRD、BET、FTIR和XPS等对rGO/PANI复合材料进行表征,从吸附等温模型、吸附动力模型等角度探讨rGO/PANI对Cr(Ⅵ)的吸附还原反应特征及机理。结果表明,rGO/PANI对Cr(Ⅵ)的去除包括吸附、络合和还原三个部分。Cr(Ⅵ)一部分吸附在rGO/PANI表面,一部分还原成Cr(Ⅲ),还原的Cr(Ⅲ)部分被络合在复合材料表面,少量扩散到溶液中。在pH=2时,rGO/PANI对Cr(Ⅵ)的最大去除量可达到97.61 mg/g,其中,吸附还原量为73.46 mg/g,溶液中剩余的Cr(Ⅲ)浓度为24.13 mg/L。

HGM@GO聚氨酯复合材料的制备和导热性能研究

首先通过氧化石墨烯(GO)包覆对空心玻璃微珠(HGM)进行表面改性,再经过物理混合制备改性空心玻璃微珠/聚氨酯复合材料,使用X射线衍射仪、扫描电子显微镜、热重分析仪对经过氧化石墨烯包覆改性的空心玻璃微珠进行形貌和结构分析,对改性空心玻璃微珠/聚氨酯复合材料进行力学性能、导热性能、热膨胀性能等测试。结果表明:使用氧化石墨烯包覆空心玻璃微球对复合材料的硬度、拉伸强度、压缩强度和弯曲强度均有一定提升。在空心玻璃微球添加量高于5%后,复合材料的导热性能开始优于纯聚氨酯材料,表明空心玻璃微珠表面的石墨烯层使材料内部形成了高导热通道,整体提高了复合材料的导热系数,使复合材料密度降低的同时具备更加优良的导热性能。对复合材料的热稳定性进行测试分析发现,在添加了空心玻璃微珠填料之后,复合材料的热膨胀系数随温度增加的趋势得到了很好的抑制,在180℃下仍能保持较好的尺寸稳定性。

Efficient and Air-Stable Planar Perovskite Solar Cells Formed on Graphene-Oxide-Modified PEDOT:PSS Hole Transport Layer

As a hole transport layer, PEDOT:PSS usually limits the stability and efficiency of perovskite solar cells(PSCs) due to its hygroscopic nature and inability to block electrons. Here, a graphene-oxide(GO)-modified PEDOT:PSS hole transport layer was fabricated by spin-coating a GO solution onto the PEDOT:PSS surface. PSCs fabricated on a GO-modified PEDOT:PSS layer exhibited a power conversion efficiency(PCE) of 15.34%, which is higher than 11.90% of PSCs with the PEDOT:PSS layer.Furthermore, the stability of the PSCs was significantly improved, with the PCE remaining at 83.5% of the initial PCE values after aging for 39 days in air. The hygroscopic PSS material at the PEDOT:PSS surface was partlyremoved during spin-coating with the GO solution, which improves the moisture resistance and decreases the contact barrier between the hole transport layer and perovskite layer. The scattered distribution of the GO at the PEDOT:PSS surface exhibits superior wettability, which helps to form a high-quality perovskite layer with better crystallinity and fewer pin holes. Furthermore, the hole extraction selectivity of the GO further inhibits the carrier recombination at the interface between the perovskite and PEDOT:PSS layers. Therefore, the cooperative interactions of these factors greatly improve the light absorption of the perovskite layer, the carrier transport and collection abilities of the PSCs, and especially the stability of the cells.

Effect of Ni loadings on the activity and coke formation of MgO-modified Ni/Al_2O_3 nanocatalyst in dry reforming of methane

MgO-modified Ni/Al2O3 catalysts with different Ni loadings were prepared and employed in dry reforming of methane （DRM）. The effect of Ni loadings on the activity and coke formation of Ni/MgO-A1203 catalysts were investigated. The synthesized catalysts were characterized by XRD, N2 adsorption-desorption, SEM, TPO and TPR techniques. The obtained results showed that increasing nickel loading decreased the BET surface area and increased the catalytic activity and amount of deposited carbon. In addition, the effect of gas hourly space velocity （GHSV） and feed ratio were studied.