The gravity and isostatic Moho in North China Craton and their implications to seismicity

The Bouguer gravity is the combination of field sources in different depths. Based on the multi-scale analysis of the Bouguer gravity,we can get the gravity anomaly caused by the Moho undulation. This study presents the various orders of approximation of gravity anomaly in North China Craton（NCC）,the possible source depths with radial logarithmic power spectrum,and the relationship between the deep structure and gravity anomaly. Furthermore,we discuss the isostatic compensation about the Moho depth from gravity and deep seismic sounding profiles（DSS）. The results show that：（1） the fourth approximation could have resulted from the Moho undulation,（2） in contrast to the isostatic Moho,the inverted gravity Moho and the DSS Moho show that most of NCC has been isostatically compensated,and（3） the isostatic compensation rate has some close relation to the seismicity.

An iterative Wiener filtering method based on the gravity gradient invariants

How to deal with colored noises of GOCE （Gravity field and steady - state Ocean Circulation Explorer） satellite has been the key to data processing. This paper focused on colored noises of GOCE gradient data and the frequency spectrum analysis. According to the analysis results, gravity field model of the optima] degrees 90-240 is given, which is recovered by COCE gradient data. This paper presents an iterative Wiener filtering method based on the gravity gradient invariants. By this method a degree-220 model was calculated from GOCE SGG （Satellite Gravity Gradient） data. The degrees above 90 of ITG2010 were taken as the prior gravity field model, replacing the low degree gravity field model calculated by GOCE orbit data. GOCE gradient colored noises was processed by Wiener filtering. Finally by Wiener filtering iterative calculation, the gravity field model was restored by space-wise harmonic analysis method. The results show that the model＇s accuracy matched well with the ESA＇s （European Space Agency） results by using the same data,

Characterized the Microalgae （Chlorella and Spirulina） and Macro Algae by Using TGA and Bomb Calorific Meter for the Biomass Energy Application

Biomass usually is noticed a composition of various types of waste materials that can be utilized as useful form of energy alternative to the conventional fossil fuels. However, this new kind of energy has not met its full potential in production of energy, especially electricity generation due to its lower performance in terms of thermal efficiency. Algae （included Microalgae ＆ Macroalgae） are widely used for multi-application developments such as fishery aquaculture, food/nutrient supplement, cosmetics, and biomass energy. Microalgae have been treated as the source of bio-fuel. In this paper, we selected the two types of freshwater microalgae ＂Chlorella Vulgaris＂ ＆ ＂Spirulina＂ and macro algae （Laminariaceae） as the main materials and we analyzed TGA （thermal gravity analysis） and calorific values （heat of combustion）. We found the calorific values are 1,000-5,000 KC/KG and TGA results show that the microalgae decrease rapidly after reached 300 ℃. The results in this paper will be used as a reference material for microalgae multi-oriental energy application and biomass composition proximate and ultimate research development in the future.

Curing mechanism of furan resin modified with different agents and their thermal strength

The curing mechanism of furfuryl alcohol and urea-formaldehyde furan resins was investigated using infrared spectroscopy(IR) technique.The curing productions of urea-formaldehyde furan resins modified with different agents(i.e.sorbitol,polyester polyol,phenol and acetone) and the productions of incomplete curing were characterized by differential thermal analysis(DTA) and thermal gravity analysis(TG).The results indicate that except for polyester polyol,the other modifiers have little effect on the thermal strength of urea-formaldehyde furan resin.Furthermore,the thermal strength can be improved at a temperature of higher than 550℃.

Energy-Efficient Cluster in Wireless Sensor Network Using Life Time Delay Clustering Algorithms

Through Wireless Sensor Networks(WSN)formation,industrial and academic communities have seen remarkable development in recent decades.One of the most common techniques to derive the best out of wireless sensor networks is to upgrade the operating group.The most important problem is the arrangement of optimal number of sensor nodes as clusters to discuss clustering method.In this method,new client nodes and dynamic methods are used to determine the optimal number of clusters and cluster heads which are to be better organized and proposed to classify each round.Parameters of effective energy use and the ability to decide the best method of attachments are included.The Problem coverage find change ability network route due to which traffic and delays keep the performance to be very high.A newer version of Gravity Analysis Algorithm(GAA)is used to solve this problem.This proposed new approach GAA is introduced to improve network lifetime,increase system energy efficiency and end delay performance.Simulation results show that modified GAA performance is better than other networks and it has more advanced Life Time Delay Clustering Algorithms-LTDCA protocols.The proposed method provides a set of data collection and increased throughput in wireless sensor networks.

Effect of FeCl_3 on Ignition Point of Coals

The potential combustion-supporting agents for three kinds of coals were selected according to the Thermal Gravity Analysis (TG). The TG analysis shows that the addition of FeCl3 can reduce the ignition point of clarain and fusain from Guangxi and also the raw coal from Xinwen. The combustion-supporting effect of FeCl3 on the clarain is quite obvious, with the maximum reduction of ignition point reaching 90 ℃ and that of the burn-out point reaching 95 ℃. What is more, it can make the coal burn more completely. The relationship between the amount of FeCl3 and the ig- nition point was also investigated and the optimum amount of FeCl3 obtained. When FeCl3 is added in doses of 6%, 4%, 2%, and 1%, the reduction of ignition point is proportional to the amount of agent. If 6% of FeCl3 is added, the combus- tion-supporting effect is very significant; while if only 1% of FeCl3 is added, the combustion-supporting effect can be negligible. Therefore the optimum amount of FeCl3 is between 3% and 6% for achieving an obvious combus- tion-supporting effect. In addition, the combustion supporting mechanism of FeCl3 was also studied, which is the com- bined action of chloride and iron in the compound.

Research on the relationship between geophysical structural features and earthquakes in Mid-Yunnan and the surrounding area

In this study, we analyzed the gravity and, magnetic characteristics, and the occurrence of a fault zone and discussed the relationships between the two locations. The results reveal that the subsurface structures strikes are different compared with those in the research region. In other words, the geophysical advantageous directions from the gravity and magnetic anomalies are not the same as those caused by the surface structures. The local horizontal gradient results from the gravity and magnetic anomalies show that the majority of earthquakes occur along an intense fault zone, which is a zone of abrupt gravity and negative magnetic change, where the shapes match very well. From the distribution of earthquakes in this area, we find that it has experienced more than 11 earthquake events with magnitude larger than Ms7.0. In addition, water development sites such as Jinshajiang, Lancangjiang, and the Red River and Pearl River watersheds have been hit ten times by earthquakes of this magnitude. It is observed that strong earthquakes occur frequently in the Holocene active fault zone.

Research on Thermal Properties of Nomex Fiber and Nomex/Viscose Blended Fabric

Based on the analysis of the properties of Nomex 450 and Nomex 462,the thermal properties of Nomex 462/Lenzing Viscose Flame retardent(FR)blending materials were analyzed.It was discovered through burning test and Thermal Gravity(TG)analysis that the blended material was superior in thermal behaviors to the material made from either Nomex or Viscose FR filament,when the ratio of Nomex and Lenzing Viscose FR reached 80∶20,and excellent thermal properties were achieved with the value of Limiting Oxygen Index(LOI)up to 36.1%.Blending Nomex and Viscose FR filaments may be recommended for better fire retardant property of related fabric.