Interval grey number sequence prediction by using non-homogenous exponential discrete grey forecasting model

This paper aims to study a new grey prediction approach and its solution for forecasting the main system variable whose accurate value could not be collected while the potential value set could be defined. Based on the traditional nonhomogenous discrete grey forecasting model（NDGM）, the interval grey number and its algebra operations are redefined and combined with the NDGM model to construct a new interval grey number sequence prediction approach. The solving principle of the model is analyzed, the new accuracy evaluation indices, i.e. mean absolute percentage error of mean value sequence（MAPEM） and mean percent of interval sequence simulating value set covered（MPSVSC）, are defined and, the procedure of the interval grey number sequence based the NDGM（IG-NDGM） is given out. Finally, a numerical case is used to test the modelling accuracy of the proposed model. Results show that the proposed approach could solve the interval grey number sequence prediction problem and it is much better than the traditional DGM（1,1） model and GM（1,1） model.

A new grey forecasting model based on BP neural network and Markov chain

A new grey forecasting model based on BP neural network and Markov chain was proposed. In order to combine the grey forecasting model with neural network, an important theorem that the grey differential equation is equivalent to the time response model, was proved by analyzing the features of grey forecasting model（GM（1,1））. Based on this, the differential equation parameters were included in the network when the BP neural network was constructed, and the neural network was trained by extracting samples from grey system＇s known data. When BP network was converged, the whitened grey differential equation parameters were extracted and then the grey neural network forecasting model （GNNM（1,1）） was built. In order to reduce stochastic phenomenon in GNNM（1,1）, the state transition probability between two states was defined and the Markov transition matrix was established by building the residual sequences between grey forecasting and actual value. Thus, the new grey forecasting model（MNNGM（1,1）） was proposed by combining Markov chain with GNNM（1,1）. Based on the above discussion, three different approaches were put forward for forecasting China electricity demands. By comparing GM（1, 1） and GNNM（1,1） with the proposed model, the results indicate that the absolute mean error of MNNGM（1,1） is about 0.4 times of GNNM（1,1） and 0.2 times of GM（I, 1）, and the mean square error of MNNGM（1,1） is about 0.25 times of GNNM（1,1） and 0.1 times of GM（1,1）.

Hybrid grey model to forecast monitoring series with seasonality

The grey forecasting model has been successfully applied to many fields. However, the precision of GM(1,1) model is not high. In order to remove the seasonal fluctuations in monitoring series before building GM(1,1) model, the forecasting series of GM(1,1) was built, and an inverse process was used to resume the seasonal fluctuations. Two deseasonalization methods were presented , i.e., seasonal index-based deseasonalization and standard normal distribution-based deseasonalization. They were combined with the GM(1,1) model to form hybrid grey models. A simple but practical method to further improve the forecasting results was also suggested. For comparison, a conventional periodic function model was investigated. The concept and algorithms were tested with four years monthly monitoring data. The results show that on the whole the seasonal index-GM(1,1) model outperform the conventional periodic function model and the conventional periodic function model outperform the SND-GM(1,1) model. The mean Absolute error and mean square error of seasonal index-GM(1,1) are 30.69% and 54.53% smaller than that of conventional periodic function model, respectively. The high accuracy, straightforward and easy implementation natures of the proposed hybrid seasonal index-grey model make it a powerful analysis technique for seasonal monitoring series.

The Application of a Grey Markov Model to Forecasting Annual Maximum Water Levels at Hydrological Stations

Compared with traditional real-time forecasting,this paper proposes a Grey Markov Model(GMM) to forecast the maximum water levels at hydrological stations in the estuary area.The GMM combines the Grey System and Markov theory into a higher precision model.The GMM takes advantage of the Grey System to predict the trend values and uses the Markov theory to forecast fluctuation values,and thus gives forecast results involving two aspects of information.The procedure for forecasting annul maximum water levels with the GMM contains five main steps:1) establish the GM(1,1) model based on the data series;2) estimate the trend values;3) establish a Markov Model based on relative error series;4) modify the relative errors caused in step 2,and then obtain the relative errors of the second order estimation;5) compare the results with measured data and estimate the accuracy.The historical water level records(from 1960 to 1992) at Yuqiao Hydrological Station in the estuary area of the Haihe River near Tianjin,China are utilized to calibrate and verify the proposed model according to the above steps.Every 25 years' data are regarded as a hydro-sequence.Eight groups of simulated results show reasonable agreement between the predicted values and the measured data.The GMM is also applied to the 10 other hydrological stations in the same estuary.The forecast results for all of the hydrological stations are good or acceptable.The feasibility and effectiveness of this new forecasting model have been proved in this paper.

A self-adaptive grey forecasting model and its application

GM(1,1)models have been widely used in various fields due to their high performance in time series prediction.However,some hypotheses of the existing GM(1,1)model family may reduce their prediction performance in some cases.To solve this problem,this paper proposes a self-adaptive GM(1,1)model,termed as SAGM(1,1)model,which aims to solve the defects of the existing GM(1,1)model family by deleting their modeling hypothesis.Moreover,a novel multi-parameter simultaneous optimization scheme based on firefly algorithm is proposed,the proposed multi-parameter optimization scheme adopts machine learning ideas,takes all adjustable parameters of SAGM(1,1)model as input variables,and trains it with firefly algorithm.And Sobol’sensitivity indices are applied to study global sensitivity of SAGM(1,1)model parameters,which provides an important reference for model parameter calibration.Finally,forecasting capability of SAGM(1,1)model is illustrated by Anhui electricity consumption dataset.Results show that prediction accuracy of SAGM(1,1)model is significantly better than other models,and it is shown that the proposed approach enhances the prediction performance of GM(1,1)model significantly.

Grey relationship analysis and grey forecasting modeling on thermal stability of synthetic single diamond

Through analyzing 7 Ib-type samples of synthetic single diamonds by their DTA and TG in air, we ascertained the extrapolated onset temperature on the curves of DTA as the characteristic temperature of their thermal stabilities. Based on the grey system theory, we analyzed 4 factors influential in the thermal stability by the grey relationship analysis, a quantitative method, and derived the grey relationship sequence, that is, the rank of the influence extent of 4 factors on the thermal stability. Furthermore, we established the grey forecasting model, namely GM(1,5), for predicting the thermal stability of single diamonds with their intrinsic properties, which was then examined by a deviation-probability examination. The results illustrate that it is reasonable to take the Extrapolated Onset Temperature in DTA as the characteristic temperature for thermal stability (TS) of Ib-type synthetic single diamonds. The nitrogen content and grain shape regularity of diamonds are dominating factors. Likewise, grain size and compressive strength are minor factors. In addition, GM(1,5) can be used to predict the thermal stability of Ib-type synthetic single diamonds available. The precision rank of GM(1,5) is ‘GOOD’.

Expansion modelling of discrete grey model based on multi-factor information aggregation

This paper aims to study a novel expansion discrete grey forecasting model, which could aggregate input information more effectively. In general, existing multi-factor grey forecasting models, such as one order and h variables grey forecasting model （GM （1, h））, always aggregate the main system variable and independent variables in a linear form rather than a nonlinear form, while a nonlinear form could be used in more cases than the linear form. And the nonlinear form could aggregate collinear independent factors, which widely lie in many multi-factor forecasting problems. To overcome this problem, a new approach, named as the Solow residual method, is proposed to aggregate independent factors. And a new expansion model, feedback multi-factor discrete grey forecasting model based on the Solow residual method （abbreviated as FDGM （1, h））, is proposed accordingly. Then the feedback control equation and the parameters＇ solution of the FDGM （1, h） model are given. Finally, a real application is used to test the modelling accuracy of the FDGM （1, h） model. Results show that the FDGM （1, h） model is much better than the nonhomogeneous discrete grey forecasting model （NDGM） and the GM （1, h） model.

A novel fractional grey forecasting model with variable weighted buffer operator and its application in forecasting China's crude oil consumption

Oil is an important strategic material and civil energy.Accurate prediction of oil consumption can provide basis for relevant departments to reasonably arrange crude oil production,oil import and export,and optimize the allocation of social resources.Therefore,a new grey model FENBGM(1,1)is proposed to predict oil consumption in China.Firstly,the grey effect of the traditional GM(1,1)model was transformed into a quadratic equation.Four different parameters were introduced to improve the accuracy of the model,and the new initial conditions were designed by optimizing the initial values by weighted buffer operator.Combined with the reprocessing of the original data,the scheme eliminates the random disturbance effect,improves the stability of the system sequence,and can effectively extract the potential pattern of future development.Secondly,the cumulative order of the new model was optimized by fractional cumulative generation operation.At the same time,the smoothness rate quasi-smoothness condition was introduced to verify the stability of the model,and the particle swarm optimization algorithm(PSO)was used to search the optimal parameters of the model to enhance the adaptability of the model.Based on the above improvements,the new combination prediction model overcomes the limitation of the traditional grey model and obtains more accurate and robust prediction results.Then,taking the petroleum consumption of China's manufacturing industry and transportation,storage and postal industry as an example,this paper verifies the validity of FENBGM(1,1)model,analyzes and forecasts China's crude oil consumption with several commonly used forecasting models,and uses FENBGM(1,1)model to forecast China's oil consumption in the next four years.The results show that FENBGM(1,1)model performs best in all cases.Finally,based on the prediction results of FENBGM(1,1)model,some reasonable suggestions are put forward for China's oil consumption planning.

Forecasting of dissolved oxygen in the Guanting reservoir using an optimized NGBM(1,1) model

An optimized nonlinear grey Bernoulli model was proposed by using a particle swarm optimization algorithm to solve the parameter optimization problem. In addition, each item in the first-order accumulated generating sequence was set in turn as an initial condition to determine which alternative would yield the highest forecasting accuracy. To test the forecasting performance, the optimized models with different initial conditions were then used to simulate dissolved oxygen concentrations in the Guantlng reservoir inlet and outlet （China）. The empirical results show that the optimized model can remarkably improve forecasting accuracy, and the particle swarm optimization technique is a good tool to solve parameter optimization problems. What＇s more, the optimized model with an initial condition that performs well in in-sample simulation may not do as well as in out-of-sample forecasting.