利用Grid Control构建医院Oracle数据库集中管理平台

目的:随着医院信息化建设的不断深入,探讨怎样提高系统管理员对各个应用系统的管理能力,加强对数据库系统的监控和维护。方法:通过先介绍Grid Control软件架构,讲解怎样搭建Grid Control管理平台,利用Oracle提供的Grid Control软件来集中管理医院整个所有的数据库和主机系统。结果:通过Grid Control管理平台的搭建,使系统管理员的工作更加高效,达到预期目的 。

使用OEM 10g Grid Control进行Oracle数据库环境集中管理

首先简要介绍了企业大量Oracle数据库环境的管理难题,其次介绍了Oracle 10g EnterpriseManager Grid Control工具的系统管理框架和数据库管理功能,最后通过实际例子对如何部署和使用Grid Control进行数据库环境集中管理展开详细论述。

在VFP编程过程中正确使用Grid Control

在VISUALFOXPRO编程中使用网格控件显示表格时经常出现表格无数据或GRID表格突然变成一片空白等现象,就VISUALFOXPRO的GRID控件这一不完善问题作了分析并提出解决的方案.

Smart Grid, Smart Controllers and Home Energy Automation—Creating the Infrastructure for Future

Integration of unpredictable renewable power sources into the Grid is leading to the development of wide area control algorithms and smart grid. Smart meters are the first step in the building a smart consumer interface. Much more, however, would be required in building a smart grid than just smart meters. This paper explores the conceptual architecture of smart grid. It highlights the need for additional infrastructure to realize full potential of smart grid. The information presented in this paper is an attempt to uncover what the future in smart grid could be and what infrastructure would be required to tap its potential. As smart grid evolves, more functionality would be built in the constituents. The paper also proposes mathematical basis for some of the controller algorithms.

Study of Micro Grid Safety &Protection Strategies with Control System Infrastructures

Microgrids have been proposed in order to improve reliability and stability of electrical system and to ensure power quality of grid. Microgrid consists of low voltage distribution systems with distributed energy resources, such as wind turbine and photovoltaic power systems, together with storage devices. It is essential to protect a micro grid in both the grid-connected and the islanded mode of operation against all different types of faults. This paper describes micro grid protection and safety concept with central control and monitoring unit where multifunctional intelligent digital relay could be used. This central control & monitoring infrastructure is used for adaptive relay settings strategy for micro grid protection. Also operational safety design concept and fault mitigation technique is proposed to ensure confidence in protection system.

A Novel Control Strategy of PWM Rectifier with LCL Filter Under Unbalanced Grid Condition

The paper presents a successful design and good result of grid voltage feed-forward control strategy with no damping regulator of LCL filter applied in Three-phase Pulse Width Modulation( PWM) rectifier under unbalance grid condition for renewable energy processing. It is demonstrated that the closed-loop current control is decoupled with the grid voltage feed-forward control,and good waveform of grid current with low order harmonics is obtained under unbalance grid condition. This novel strategy is simple and reliable,applied with PI regulator but no resonant controller in α,β two-phase stationary frame. Moreover,the results of experiment and simulation are also illustrated to validate the novel strategy well applied in the closed-loop current control system under unbalanced grid condition.

A New Predictive Direct Power Control Solution for Three-phase Grid-Connected Inverters

This paper proposes a new Predictive Direct Power Control(P-DPC) solution for three-phase grid-connected inverters, which combines direct power control strategy with the predictive control strategy and space vector pulse width modulation(SVPWM), obtaining both high transient performance and a constant switching frequency. This control solution can achieve decoupling control for active and reactive power and an adjustable power factor. Meanwhile, the grid-connected current can approximately be sinusoidal. The feasibility and advantages of the control strategy are verified by the simulation and experiment compared with another existing P-DPC.

Grid Harmonic and Control Delay Compensation for Three-phase Grid-connected VSIs in Small Wind Turbine Systems

Voltage space vector pulse-width modulation(SVPWM) has been widely applied to control current in three-phase voltage source inverters(VSI).However,as a voltage type modulator,SVPWM has certain drawbacks compared with current type modulators for grid-connected applications.For a grid-connected VSI,the performance of existing current controllers based on SVPWM is compromised by grid harmonics,control delay and system nonlinearities such as switching dead time.Moreover,unlike current type PWM,SVPWM does not inherently have over-current protection.A novel SVPWM-based current controller is proposed for three-phase grid-connected VSIs for small wind turbine appli-cations.To overcome the drawbacks of SVPWM,a grid harmonic compensation method is proposed along with compen-sation for control delays.Both simulation and experimental results have established excellent steady-state response and fast dynamic response of the current controller.In addition,the DSP-based control system has both improved real-time control performance and fast response for over-current protection.

Energy Management for a Residential Microgrid Using Wavelet Transform and Fuzzy Control Including a Vehicle-to-Grid System

This paper presents the design and implementation of an energy management system(EMS) with wavelet transform and fuzzy control for a residential micro-grid. The hybrid system in this paper consists of a wind turbine generator,photovoltaic(PV) panels,an electric vehicle(EV),and a super capacitor(SC),which is able to connect or disconnect to the main grid. The control strategy is responsible for compensating the difference between the generated power by the wind and solar generators and the demanded power by the loads. Wavelet transform decomposes the power difference into a smoothed component and a fast fluctuated component. The command approach used for fuzzy logic rules considers the state of charging(SOC) of EV,renewable production,and the load demand as parameters. Furthermore,the command rules are developed in order to ensure a reliable grid when taking into account the EV battery protection to decide the output power of the EV. The model of the hybrid system is developed in detail under Matlab/Simulink software environment.

A Control Strategy for Grid-connected Inverters With LCL Filters

把LCL滤波器作为电压源型并网逆变器与电网的接口已受到广泛关注。与单电感L滤波器相比，利用电感值较小的LCL滤波器对入网电流的高次谐波具有显著的衰减效果，特别是在低开关频率的大功率并网逆变系统应用中更具明显优势，但是仅采用直接入网电流控制时，LCL滤波器接口的并网逆变器系统存在稳定性问题。该文采用电网侧电感电流和逆变侧电感电流双闭环控制策略对并网电流进行直接控制，电网侧电感电流作为外环更容易抑制并网电流的谐波因素，且可以直接控制入网电流的单位功率因数，采用逆变器侧电感电流作为内环可以增加系统阻尼，从而可抑制系统振荡，增加系统稳定性。对该方案进行系统建模，并深入分析了滤波器参数、控制器参数及系统稳定性之间的精确量化关系。仿真和实验结果表明，该控制策略既可有效抑制入网电流谐振和实现进网电流的高功率因数运行，同时又具有良好的稳态和动态性能。

Task-and-role-based access-control model for computational grid

Access control in a grid environment is a challenging issue because the heterogeneous nature and independent administration of geographically dispersed resources in grid require access control to use fine-grained policies. We established a task-and-role-based access-control model for computational grid (CG-TRBAC model), integrating the concepts of role-based access control (RBAC) and task-based access control (TBAC). In this model, condition restrictions are defined and concepts specifically tailored to Workflow Management System are simplified or omitted so that role assignment and security administration fit computational grid better than traditional models; permissions are mutable with the task status and system variables, and can be dynamically controlled. The CG-TRBAC model is proved flexible and extendible. It can implement different control policies. It embodies the security principle of least privilege and executes active dynamic authorization. A task attribute can be extended to satisfy different requirements in a real grid system.

Micro-Grid Smooth Switchover Method Based on Controller State Following

Micro-grid smooth switchover between different operation modes is important for steady operation and reliable power supply of micro-grid. In order to reduce the transient fluctuation of voltage and frequency during switchover, this paper proposed a new switchover method based on controller state following. When transferring to island mode, the control method for inverter of storage device changed from PQ control to V/f control. Before switchover, the output of V/f controller is always following the output of PQ controller. So that the sudden change of output is avoided at the moment of switchover. A micro-grid model with photovoltaic and battery is built on DIgSILENT Power Factory simulation software, to simulate micro-grid switchover from grid-connected mode to island mode. Results show this method can effectively suppress the transient fluctuation of voltage and frequency, and reduce the influence of transient process on power grid. This conclusion has important practical significance on micro-grid smooth switchover from grid-con- nected mode to island mode.

A Virtual Synchronous Machine to Support Dynamic Frequency Control in a Mini-Grid That Operates in Frequency Droop Mode

This paper addresses the problem of dynamic frequency control in a diesel-based mini-grid. It is shown that a virtual synchronous machine (VSM) can support dynamic frequency control by adding virtual inertia and damping to the system. However, it is found that the typical formulation of damping power does not work properly when the grid forming gen-set operates in droop mode because of the unknown stabilization value of the grid frequency. As a solution to this problem, an estimator for the stabilization frequency that works in conjunction with the damping function of the VSM is proposed. Theoretical and experimental results provide evidence of a satisfactory performance of the proposed VSM with estimator for different values of the gen-set droop factor. The estimated stabilization frequency converges in approximately 2 s and the maximum frequency deviation during the transient is reduced in 34%, on average.

Droop Control Methods for PV-Based Mini Grids with Different Line Resistances and Impedances

Different droop control methods for PV-based communal grid networks (minigrids and microgrids) with different line resistances (R) and impedances (X) are modelled and simulated in MATLAB to determine the most efficient control method for a given network. Results show that active power-frequency (P-f) droop control method is the most efficient for low voltage transmission networks with low X/R ratios while reactive power-voltage (Q-V) droop control method is the most efficient for systems with high X/R ratios. For systems with complex line resistances and impedances, i.e. near unity X/R ratios, P-f or Q-V droop methods cannot individually efficiently regulate line voltage and frequency. For such systems, P-Q-f droop control method, where both active and reactive power could be used to control PCC voltage via shunt-connected inverters, is determined to be the most efficient control method. Results also show that shunt-connection of inverters leads to improved power flow control of interconnected communal grids by allowing feeder voltage regulation, load reactive power support, reactive power management between feeders, and improved overall system performance against dynamic disturbances.

Vehicle to Grid Decentralized Dispatch Control Using Consensus Algorithm with Constraints

With the transition to electric vehicle technologies, large scale support infrastructure is being deployed. The vehicleto-grid (V2G) concept is an opportunity to take advantage from both infrastructure and electric vehicle drive. However, coordinating large?number of agents in a reasonable speed and lack of homogenous distribution of the service provided by vehicle users to the grid have been left unattended. We apply consensus theory to the V2G concept presenting a decentralized control solution to assure that all vehicles within a region, regardless of their technology, positioning or state of charge, can communicate with their neighbors and agree on how much energy each should individually exchange with the grid. Applying constraints to the system, we considered a 25,000 vehicle fleet connected to a?grid during peak hours. Simulating power changes and vehicles entering and leaving the system, two groups of 5 vehicles were studied: the first group remained in the system during all peak hours, while the second group only an hour. Results showed that the two groups of vehicles despite connecting to the system at different times were able to reach consensus in t = 15 s, and reported a maximum error of ε < 0.01% if left in the system during all peak hours.

Cyber Attack Protection and Control of Microgrids

Recently, the smart grid has been considered as a next-generation power system to modernize the traditional grid to improve its security, connectivity, efficiency and sustainability.Unfortunately, the smart grid is susceptible to malicious cyber attacks, which can create serious technical, economical, social and control problems in power network operations. In contrast to the traditional cyber attack minimization techniques, this paper proposes a recursive systematic convolutional(RSC) code and Kalman filter(KF) based method in the context of smart grids.Specifically, the proposed RSC code is used to add redundancy in the microgrid states, and the log maximum a-posterior is used to recover the state information, which is affected by random noises and cyber attacks. Once the estimated states are obtained by KF algorithm, a semidefinite programming based optimal feedback controller is proposed to regulate the system states, so that the power system can operate properly. Test results show that the proposed approach can accurately mitigate the cyber attacks and properly estimate and control the system states.

Operation and Control of Microgrids Using IoT (Internet of Things)

The current microgrid power management system is undergoing a significant and drastic overhaul. The integration of existing electrical infrastructure with an information and communication network is an inherent and significant need for microgrid classification and operation in this case. Microgrid technology’s most important features: 1) Full duplex communication;2) Advanced metering infrastructure;3) Renewable and energy resource integration;4) Distribution automation and complete monitoring, as well as overall power system control. A microgrid’s communication infrastructure is made up of several hierarchical communication networks. Microgrid applications can frequently be found in numerous aspects of energy consumption. Because it provides a spontaneous communicational network, the Internet of Things plays a fundamental and crucial role in Microgrid infrastructure. This paper covers the deployment of a comprehensive energy management system for microgrid communication infrastructure based on the Internet of Things (IoT). This paper discusses microgrid operations and controls using the Internet of Things (IoT) architecture. Microgrids make use of IoT-enabled technologies, in conjunction with power grid equipment, which are enabling local networks to provide additional services on top of the essential supply of electricity to local networks that operate in parallel with or independently of the regional grid. Local balancing, internal blockage management, and request for support marketplace or grid operator activities are examples of auxiliary services provided by the microgrid that can add value to each end-user and other true stakeholders. Different technologies, architectures, and applications that use IoT as a key element with the main purpose of preserving and regulating innovative smart microgrids in accordance with modern optimization features and regulations are designed to update and improve efficiency, resiliency, and economics.

Added Value of Power Control in Improving the Integration of Wind Turbines in Weak Grid Conditions

For economical reasons, wind turbine systems must be located in favourable sites generating a higher pro- ductivity. These are often located in areas with weak electric grid infrastructures. The constraints related to this type of grids limit the penetration levels of wind energy. These constraints are mainly related to power quality in the grid as well as the economical aspects of the project. In this study, we take into account the slow voltage variations and the flicker phenomenon. The models used are based on the development of a set of relations derived from engineering knowledge related to both technical and economical points of view. The maximal penetration level of a fixed speed wind turbine system is determined for a given grid. The power control has been investigated to improve wind turbine system integration. Obtained results show the necessity to adapt technological choices to the requirements of weaker grids. Penetration levels and wind turbine cost may be greatly improved using variable speed systems.