Gyroscope Dynamic Balance Counterweight Prediction Based on Multi-Head ResGAT Networks

The dynamic balance assessment during the assembly of the coordinator gyroscope significantly impacts the guidance accuracy of precision-guided equipment.In dynamic balance debugging,reliance on rudimentary counterweight empirical formulas persists,resulting in suboptimal debugging accuracy and an increased repetition rate.To mitigate this challenge,we present a multi-head residual graph attention network(ResGAT)model,designed to predict dynamic balance counterweights with high precision.In this research,we employ graph neural networks for interaction feature extraction from assembly graph data.An SDAE-GPC model is designed for the assembly condition classification to derive graph data inputs for the ResGAT regression model,which is capable of predicting gyroscope counterweights under small-sample conditions.The results of our experiments demonstrate the effectiveness of the proposed approach in predicting dynamic gyroscope counterweight in its assembly process.Our approach surpasses current methods in mitigating repetition rates and enhancing the assembly efficiency of gyroscopes.

Quasi-anti-parity–time-symmetric single-resonator micro-optical gyroscope with Kerr nonlinearity

Parity–time(PT) and quasi-anti-parity–time(quasi-APT) symmetric optical gyroscopes have been proposed recently which enhance Sagnac frequency splitting. However, the operation of gyroscopes at the exceptional point(EP) is challenging due to strict fabrication requirements and experimental uncertainties. We propose a new quasi-APT-symmetric micro-optical gyroscope which can be operated at the EP by easily shifting the Kerr nonlinearity. A single resonator is used as the core sensitive component of the quasi-APT-symmetric optical gyroscope to reduce the size, overcome the strict structural requirements and detect small rotation rates. Moreover, the proposed scheme also has an easy readout method for the frequency splitting. As a result, the device achieves a frequency splitting 10~5 times higher than that of a classical resonant optical gyroscope with the Earth's rotation. This proposal paves the way for a new and valuable method for the engineering of micro-optical gyroscopes.

Online asymmetry estimation for whole angle mode coriolis vibratory gyroscopes by high frequency injection

The whole angle mode gyroscope(WAMG)is considered to be the next generation architecture,but it is suffered from the asymmetry errors to conduct real products.This paper proposes a novel high frequency injection based approach for the error parameters online identification for the WAMG.The significance is that it can separate physical and error fingerprints to enable online calibration.The nonlinear WAMG dynamics are discretized to meet the requirement of numerical precision and computation efficiency.The optimized estimation methods are then constructed and compared to track asymmetry error parameters continuously.In the validation part,its results firstly prove that the proposed scheme can accurately identify constant asymmetry parameters with an overall tracking error of less than 1 ppm and the extreme numerical convergence can reach 10^(-12)ppm.Under the dynamic asymmetry variation condition,the root mean square errors(RMSE)indicate that the tracking accuracy can reach the level of10^(-3),which shows the robustness of the proposed scheme.In summary,the proposed method can effectively estimate the WAMG asymmetry errors online with satisfied performance and practical values.

Design and simulation of a silicon-based hybrid integrated optical gyroscope system

By combining a silicon-based lithium niobate modulator and a silicon-based Si3N4resonator with silicon-based photonics technology,a highly systematic design of a hybrid integrated optical gyroscope with enhanced reciprocity sensitivity and a dual micro-ring structure is proposed for the first time in this paper.The relationship between the device's structural parameters and optical performance is also analyzed by constructing a complete simulation link,which provides a theoretical design reference to improve the system's sensitivity.When the wavelength is 1550 nm,the conversion frequency of the dual-ring optical path is 50 MHz,the coupling coefficient is 0.2,and the radius R is 1000μm,the quality factor of the silicon-based Si_(3)N_(4)resonator is 2.58×10^(5),which is 1.58 times that of the silicon-on-insulator resonator.Moreover,the effective number of times the light travels around the ring before leaving the micro-ring is 5.93,which is 1.62 times that of the silicon-on-insulator resonator.The work fits the gyro dynamic output diagram,and solves the problem of low sensitivity at low speed by setting the phase offset.This results provide a basis for the further optimization of design and chip processing of the integrated optical gyroscope.

The Correlation of Gyroscope Axial Velocities

In engineering,all movable expanse revolving objects manifest gyroscopic effects.These effects are created by the action of the outer load on the revolving items whose rotating mass originates eight inertial torques about two axes.Two torques of centrifugal forces,one torque of the Coriolis force originated by the rotating distributed mass,and the torque of the change in the angular momentum of the center mass act about each axis.The inertial torques activate rotations of the gyroscope by the determined correlation.Inertial torques depend on their geometry and orientation at the spatial coordinate system.The known analytical model for the rotation of the revolving disc about axes contains a mechanical error.This error was obtained by the incorrect integration of the centrifugal inertial torque.The corrected inertial torque yields the accurate expression for the interacted rotations of the revolving disc about axes.

热振子式Z轴MEMS角速度陀螺敏感机理的研究

揭示了一种热振子式Z轴MEMS角速度陀螺的敏感机理。在给出工作原理、热振子的振动模态和陀螺效应的基础上,对敏感结构内的温度场进行了计算。结果表明:(1)开机1.8 s后在敏感结构内形成一个稳定的温度场。(2)热振子在Y方向建立驱动模态,当沿着Z轴输入角速度时,在哥氏力的作用下热振子沿着X方向移动,造成温度场偏移,X方向上对称平行设置的两热线温差ΔT_(X)随着输入加速度az的加大呈现线性增长,温度灵敏度为125 mK/(°/s)。(3)根据输入-输出ω_(z)-V_(Xout)特性曲线,得到数学模型,揭示了该陀螺的敏感机理,陀螺灵敏度为0.095 mV/(°/s),非线性度为2.97%。本研究为优化结构奠定了实用理论基础。

基于改进自适应滤波的MEMS陀螺振动误差抑制研究

本文提出一种基于改进自适应滤波的MEMS陀螺随机振动误差的补偿算法。该算法采用简化Sage-Husa自适应滤波算法估计量测噪声,并通过协方差匹配技术引入收敛性判据抑制了滤波的发散,它提高了实时性且减少了计算量。实验结果表明:经过改进算法滤波后,MEMS陀螺随机振动误差的方差减少97.76%,与常规卡尔曼滤波相比,改进算法的方差减少了72.66%,验证了改进的自适应卡尔曼滤波算法可以有效地抑制MEMS陀螺因随机振动引起的输出误差。

基于MEMS陀螺的高温随钻定向测斜仪研究

针对油气井测量时所面临的小孔径、超深井、温度范围广、温度变化率高、工作时间长等挑战,研究了基于MEMS陀螺仪的定向测斜仪,设计了MEMS陀螺定向测斜仪软硬件系统.为确保该环境下的测量精度提出了一种动态温度补偿方案,并采用基于小波滤波多尺度分析的方法对动态温变环境下陀螺输出信号进行去噪滤波处理,以实现定向测斜仪系统的测量精度.论文给出了定向测斜仪硬件系统方案、定向测斜算法、小波多尺度滤波算法.测试结果表明:该系统在常温和动态温变环境下井斜方位角精度优于±2°,井斜角精度优于±0.1°,工作温度最高150℃,可适应我国深层油气井勘探开发的应用场景需求.

基于MGMA的随钻陀螺仪误差在线补偿

针对随钻测量MEMS陀螺仪输出精度低的问题,提出一种基于磁-重力蜉蝣算法(MGMA)的陀螺误差在线补偿方法。首先,分析随钻陀螺误差来源并推导出误差补偿模型;其次,利用MEMS加速度计无累积误差的特点,根据重力向量叉乘得到向量夹角作为目标函数;此外,考虑到实际钻进时强振动和冲击对加速度计输出的不利影响,利用MEMS磁强计抗振的特点,设计磁模值相对误差约束条件。然后,在MA基础上,针对随钻恶劣环境影响下的陀螺误差参数不断变化问题,根据陀螺和磁强计输出之间的关系自适应确定搜索上下界;并利用重力模值相对误差设计惯性权重,平衡算法的全局探索和局部开发能力;最后,利用磁-重力模值相对误差在子代中引入变异扰动策略,减小陷入局部最优的可能。实验结果表明,经MGMA补偿后的陀螺输出误差明显减小,井斜角误差由9.75°降低至1.52°,且相比于PSO和MA算法具有速度快、精度高的优势。

复振型的物理意义——以两自由度陀螺系统为例

在传统振动力学教学中,复振型主要用于振动方程解耦的数学操作,对其物理意义阐述不清楚。本文从简单的旋转框架下两自由度线性系统入手,阐述了模态振动中复振型表征各振子位移与速度组合的比例关系,而非实振型所表征的位移比例关系。本文明确了复振型振动的非同时性及伴随性,引导振动力学的初学者深刻理解复振型的直观物理意义。

响水煤矿山体地质灾害实时在线监测技术

为掌握响水煤矿山体地质灾害的实时状态及变化情况,对滑坡体全要素数据进行实时监测,提出了一套基于MEMS三轴加速度传感器和MEMS陀螺仪的山体地质灾害监测技术,介绍了关键技术原理,分析了监测误差的关键参数并建立误差修正模型,制定了标定试验步骤,在工程案例中对结果进行了验证。工程应用试验结果表明,经过温度误差改正,该系统测量精度可达0.2 mm,分辨率和灵敏性优于0.1 mm,长期稳定性可达0.2 mm,可准确判断山体地质灾害的隐伏滑面为地面下13.0 m处,计算该隐伏滑坡体的方量和下滑力,满足山体地质灾害全要素长期实时监测和预测预警的需要。

谐振式光纤陀螺谐振腔传输模型仿真方法

谐振式光纤陀螺(RFOG)是一种以光纤环形谐振腔为核心敏感器件的惯性传感器。为提高仿真效率和适用性,提出了一种谐振式光纤陀螺快速运算仿真方法,搭建了谐振式光纤陀螺信号处理和闭环控制模型,其中模拟谐振腔多圈干涉耦合采用多核并行运算,包含光场叠加和传递函数两种形式。仿真结果表明所提方法仿真效率较高,平均在16s左右完成仿真,相比于原始模型的锁频程序运行效率提升了57.6%。同时两种仿真形式均适用于精度范围0.0001~1(°)/√h的谐振光纤陀螺仿真,有效适应不同仿真参数的测试要求。其中传递函数形式相较于光场叠加形式仿真效率提升了5.4倍,在±600(°)/s动态范围内标度因数非线性度降低了17%,而光场叠加形式的零偏不稳定性减小到0.652(°)/h,易于观察偏振波动误差特性。

天文导航高精度自适应航姿与时间同步技术

船用天文导航设备因采用数学解算平台,在前端原始数采样时需进行滤波处理,数据输出与同步脉冲信号输出存在时延,一旦同步脉冲信号被干扰,对外输出数据将失去实时性。针对此问题,本文提出一种高精度自适应航姿同步技术,通过建立自适应基准脉冲为预处理模块与导航解算模块提供容错空间,结合外部时间信息实时进行时间同步自校正,避免同步信号丢失造成的时间同步异常,实现上级系统对船用导航系统多样化同步需求下高频实时数据输出。试验结果表明,该方法可行有效,可提高航姿信息实时性与可靠性。

领导干部营商环境治理素养:内涵、模型框架与提升路径

提升领导干部营商环境治理素养是推进政府经济职能履行的有力抓手,是新时代干部队伍建设与营商环境优化的重要议题。通过探究领导干部营商环境治理素养的内涵生成逻辑与表现形态,构建以领导干部为主体,涵盖跨学科知识、实践技能、核心价值观、态度动机和道德伦理五个维度的治理素养陀螺模型,并从宏微观层面解析模型与具体要素。立足政府与市场的现实需求,提出开设营商环境治理课程和专业、健全特色培训与激励机制等素质能力提高路径,以期为提高政府治理体系与治理能力现代化水平提供参考。面向新发展阶段的营商环境治理素养研究需重点关注多元主体融合、评价指标体系构建等议题。

MEMS陀螺工作原理及其性能提升方法

MEMS陀螺是一种应用广泛的新型微惯性传感器,可实现高精度、小体积、抗干扰性强的角速度测量,被广泛应用于航空航天、平台钻井、自动驾驶、可穿戴设备以及手机中。近年来,随着对MEMS陀螺研究的不断深入,许多新型MEMS陀螺的工作原理被提出,由于测量原理的不同,其性能差异往往很大。本文旨在解决对MEMS陀螺的工作模式缺少系统性综述的问题,根据陀螺最终的读出技术,将MEMS陀螺的工作模式分为调幅、全角以及调频模式。在系统介绍其工作原理的基础上,详细讨论了各种工作模式下MEMS陀螺的性能提升方法。最后还介绍了各类MEMS陀螺的发展趋势,并结合各模式特性对MEMS陀螺的发展做出了展望。

采用SGCMG的两轮单辙平台自平衡控制技术

针对以自行车、摩托车为代表的两轮单辙平台的自然不稳定问题,采用单框架控制力矩陀螺(SGCMG)为平衡控制机构,研究两轮单辙平台不同工况下自平衡控制算法。分析两轮单辙平台横向力矩,推导横滚转动动力学方程,并根据不同状态误差设计了增益调度PID控制器;建立轮-地接触点模型,修正曲线运动时目标横滚角,减小反馈静差,获得更好的动态响应;以前叉转向趋势预估未来时刻转向角度与目标平衡横滚角度,提前调整姿态以重力矩抵消离心力矩,模拟人骑行时的预判压弯行为。相关算法经仿真验证与实车测试,可在静止与曲线运动等工况下保持动态平衡,效果良好,表明了算法的有效性。

陀螺角速度控制下的单辙两轮车自平衡研究

针对单辙两轮车的不稳定的系统,提出通过控制两个单框架控制力矩陀螺(SGCMG)来研究单辙两轮车的自平衡问题,设计了一个基于滑模控制(SMC)的陀螺角速度控制器,控制SGCMG产生进动力矩,并采用一个奇异回避算法避免陀螺发生奇异现象,以实现整车在静止和动态下的自平衡,并通过仿真验证验证在越障和跨壕沟路况时的自平衡能力。仿真结果表明,所采用的控制方法能够以较小的框架角度使整车快速平衡到直立状态,并且在行驶过过程中很好的抵抗外部干扰,以一个距平衡角度2°范围内的侧倾角度行驶,仿真结果对单辙两轮车的平衡行驶有显著意义。

基于无迹卡尔曼滤波算法的喷涂机器人末端位姿补偿系统

喷涂建筑机器人在进行建图时无法将地面平整度的信息包含在地图中。当机器人按照所建地图运行时,由于地面信息的缺失,喷涂建筑机器人工作末端的喷涂夹具无法与墙面平行。为补偿喷涂夹具相对于墙面之间的位姿误差,提出一种基于无迹卡尔曼滤波的多传感器融合的喷涂夹具位姿补偿方法:以位移测量传感器测得的数据构建夹具位姿的状态方程,以陀螺仪测得的数据构建夹具位姿测量方程;利用无迹卡尔曼滤波算法获得夹具姿态的最优估计并将其传递给机器人,从而实现对喷涂夹具位姿误差的补偿。搭建实验平台验证了误差补偿系统的可行性。实验结果表明,误差补偿后的喷涂夹具相对于墙面之间的角度误差减小至0.005°。

Kinematic calibration under the expectation maximization framework for exoskeletal inertial motion capture system

This study presents a kinematic calibration method for exoskeletal inertial motion capture (EI-MoCap) system with considering the random colored noise such as gyroscopic drift.In this method, the geometric parameters are calibrated by the traditional calibration method at first. Then, in order to calibrate the parameters affected by the random colored noise, the expectation maximization (EM) algorithm is introduced. Through the use of geometric parameters calibrated by the traditional calibration method, the iterations under the EM framework are decreased and the efficiency of the proposed method on embedded system is improved. The performance of the proposed kinematic calibration method is compared to the traditional calibration method. Furthermore, the feasibility of the proposed method is verified on the EI-MoCap system. The simulation and experiment demonstrate that the motion capture precision is significantly improved by 16.79%and 7.16%respectively in comparison to the traditional calibration method.

谐振式光学陀螺噪声抑制技术研究现状(特邀)

谐振式光学陀螺仪利用光学谐振腔在时空上对光波极强的局域增强效应,有望成为兼具高精度和小体积的光学陀螺。然而,谐振式陀螺转动产生的Sagnac效应相对微弱,容易受到陀螺系统内非互易性以及互易性噪声的干扰,成为其精度提升的瓶颈。在陀螺的小型化过程中这一问题更加凸显。因此,对谐振式光学陀螺仪进行噪声抑制显得尤为重要。本文详细综述了谐振式光学陀螺中非互易性和互易性两大类噪声的原理及其抑制方法,总结了该领域近来年的研究现状及未来挑战与发展趋势,为我国谐振式光学陀螺发展提供参考。