Combined stress waves with phase transition in thin-walled tubes

The incremental constitutive relation and governing equations with combined stresses for phase transition wave propagation in a thin-walled tube are established based on the phase transition criterion considering both the hydrostatic pressure and the deviatoric stress. It is found that the centers of the initial and subsequent phase transition ellipses are shifted along the sigma-axis in the sigma tau-plane due to the tension-compression asymmetry induced by the hydrostatic pressure. The wave solution offers the 'fast' and 'slow' phase transition waves under combined longitudinal and torsional stresses in the phase transition region. The results show some new stress paths and wave structures in a thin-walled tube with phase transition, differing from those of conventional elastic-plastic materials.

A STUDY ON THE EFFECT OF RADIAL INERTIA ON THE ELASTO-PLASTIC COMBINED STRESS WAVE PROPAGATION IN THIN-WALLED TUBES

An in-depth analysis of propagation characteristics ofelasto-plastic combined stress waves in circular thin-walled tubeshas been made. In obtaining the simple-wave solution, however, mostresearches have ignored the influence of the circumferential stressrelated to the radial inertial ef- fect in the tubes. In this paperthe incremental elasto-plastic constitutive relations which areconve- nient for dynamic numerical analysis are adopted, and thefinite-difference method is used to study the evolution adpropagation of elasto-plastic combined stress waves in a thin-walledtube with the radial inertial effect of the tube considered. Thecalculation results are compared with those obtained when the radialinertial effect is not considered. The calculation results show thatthe radial inertial effect of a tube has a fairly great influence onthe propagation of elasto-plastic combined stress waves.

A novel slotted helix slow-wave structure for high power Ka-band traveling-wave tubes

A novel slotted helix slow-wave structure （SWS） is proposed to develop a high power, wide-bandwidth, and high reliability millimeter-wave traveling-wave tube （TWT）. This novel structure, which has higher heat capacity than a conven- tional helix SWS, evolves from conventional helix SWS with three parallel rows of rectangular slots made in the outside of the helix tape. In this paper, the electromagnetic characteristics and the beam-wave interaction of this novel structure operating in the Ka-band are investigated. From our calculations, when the designed beam voltage and beam current are set to be 18.45 kV and 0.2 A, respectively, this novel circuit can produce over 700-W average output power in a frequency range from 27.5 GHz to 32.5 GHz, and the corresponding conversion efficiency values vary from 19% to 21.3%, and the maximum output power is 787 W at 30 GHz.

A three-dimensional time-dependent theory for helix traveling wave tubes in beam-wave interaction

This paper presents a three-dimensional time-dependent nonlinear theory of helix traveling wave tubes for beam- wave interaction. The radio frequency electromagnetic fields are represented as the superposition of azimuthally sym- metric waves in a vacuum sheath helix. Coupling impedance is introduced to the electromagnetic field equations＇ stimulating sources, which makes the theory easier and more flexible to realize. The space charge fields are calculated by electron beam space-charge waves expressed as the superposition solutions of Helmholtz equations. The focusing forces due to either a solenoidal field or a periodic permanent magnetic field is also included. The dynamical equations of electrons are Lorentz equations associating with electromagnetic fields, focusing fields and space-charge fields. The numerically simulated results of a tube are presented.

Nonlinear time-dependent simulation of helix traveling wave tubes

A one-dimensional nonlinear time-dependent theory for helix traveling wave tubes is studied. A generalized electromagnetic field is applied to the expression of the radio frequency field. To simulate the variations of the high frequency structure, such as the pitch taper and the effect of harmonics, the spatial average over a wavelength is substituted by a time average over a wave period in the equation of the radio frequency field. Under this assumption, the space charge field of the electron beam can be treated by a space charge wave model along with the space charge coefficient. The effects of the radio frequency and the space charge fields on the electrons are presented by the equations of the electron energy and the electron phase. The time-dependent simulation is compared with the frequency-domain simulation for a helix TWT, which validates the availability of this theory.

An Open Rectangular Waveguide Grating for Millimeter-Wave Traveling-Wave Tubes

Millimeter-wave traveling-wave tube （TWT） prevails nowadays as the amplifier for radar, communication and electronic countermeasures. The rectangular waveguide grating is a promising all-metal interaction circuit for the millimeter-wave TWT with advantages of high power capacity, fine heat dissipation, scalability to smaller dimen- sions for shorter wavelengths, compact structure and robust performance. Compared with the traditional closed structure, the open rectangular waveguide grating （ORWG） has wider bandwidth, lower cut-off frequency, and higher machining precision for higher working frequencies due to the open transverse. It is a potential structure that can work in the millimeter wave and even Terahertz band. The rf characteristics including dispersion and interaction impedance are investigated by both theoretic calculation and software simulation. The influences of the structure parameters are also discussed and compared, and the theoretical results agree well with the simula- tion results. Based on the study, the ORWG will favor the design of a broadband and high-power millimeter-wave TWT.

Design of a re-entrant double-staggered ladder circuit for V-band coupled-cavity traveling-wave tubes

The re-entrant double-staggered ladder slow-wave structure is employed in a high-power V-band coupled-cavity traveling-wave tube. This structure has a wide bandwidth, a moderate interaction impedance, and excellent thermal dissipation properties, as well as easy fabrication. A well-matched waveguide coupler is proposed for the structure. Combining the design of attenuators, a full-scale three-dimensional circuit model for the V-band coupled-cavity traveling- wave tube is constructed. The electromagnetic characteristics and the beam wave interaction of this structure are investigated. The beam current is set to be 100 mA, and the cathode voltage is tuned from 16.8 kV to 15.8 kV. The calculation results show that this tube can produce a saturated average output power over 100 W with an instantaneous bandwidth greater than 1.25 GHz in the frequency ranging from 58 GHz to 62 GHz. The corresponding gain and electronic efficiency can reach over 32 dB and 6.5%, respectively.

Physical design and cooling test of C-band standing wave accelerating tube

The physical design and cooling test of a C-band 2MeV standing wave （SW） accelerating tube are described in this paper. The designed accelerating structure consists of 3-cell buncher and 4-cell accelerating section with a total length of about 163mm, excited with 1MW magnetron. Dynamic simulation presents that about 150mA beam pulse current and 30% capture efficiency can be achieved. By means of nonlinear Gauss fit on electron transverse distribution, the diameter of beam spot FWHM （full width at half maximum of density distribution） is about 0.55mm. Cooling test results of the accelerating tube show that frequencies of cavities are tuned to 5527MHz and the field distribution of bunching section is about 3：9：10.

Nonlinear waves in a fluid-filled thin viscoelastic tube

In the present paper the propagation property of nonlinear waves in a thin viscoelastic tube filled with incom- pressible inviscid fluid is studied. The tube is considered to be made of an incompressible isotropic viscoelastic material described by Kelvin-Voigt model. Using the mass conservation and the momentum theorem of the fluid and radial dynamic equilibrium of an element of the tube wall, a set of nonlinear partial differential equations governing the propagation of nonlinear pressure wave in the solid-liquid coupled system is obtained. In the long-wave approximation the nonlinear far-field equations can be derived employing the reductive perturbation technique （RPT）. Selecting the expo- nent c~ of the perturbation parameter in Gardner-Morikawa transformation according to the order of viscous coefficient 7, three kinds of evolution equations with soliton solution, i.e. Korteweg-de Vries （KdV）-Burgers, KdV and Burgers equations are deduced. By means of the method of traveling-wave solution and numerical calculation, the propagation properties of solitary waves corresponding with these evolution equations are analysed in detail. Finally, as a example of practical application, the propagation of pressure pulses in large blood vessels is discussed.

THE INTERACTION BETWEEN SHOCK WAVES AND FOAM IN A SHOCK TUBE

An experimental study and a numerical simulation were conducted to investigate the mechanical and thermodynamic processes involved in the interaction between shock waves and low density foam. The experiment was done in a stainless shock tube (80 mm in inner diameter, 10 mm in wall thickness and 5 360 mm in length). The velocities of the incident and reflected compression waves in the foam were measured by using piezo-ceramic pressure sensors. The end-wall peak pressure behind the reflected wave in the foam was measured by using a crystal piezoelectric sensor. It is suggested that the high end-wall pressure may be caused by a rapid contact between the foam and the end-wall surface. Both open-cell and closed-cell foams with different length and density were tested. Through comparing the numerical and experimental end-wall pressure, the permeability coefficients α and β are quantitatively determined.

Study on Propagation Characteristics of Plasma Surface Wave in Medium Tube

Axial propagation characteristics of the axisymmetric surface wave along the plasma in the medium tube were studied. The expressions of electromagnetic field inside and outside the medium tube were deduced. Also, the impacts of several factors, such as plasma density, signal frequency, inner radius of medium tube, collision frequency, etc., on plasma surface wave propa- gation were numerically simulated. The results show that, the properties of plasma with higher density and lower gas pressure are closer to those of metal conductor. Furthermore, larger radius of medium tube and lower signal frequency are better for surface wave propagation. However, the effect of collision frequency is not obvious. The optimized experimental parameters can be chosen as the plasma density of about 10^17 m^-3 and the medium radius between 11 mm and 19 mm.

AN INNER-FEEDBACK-STYLE TRAVELING-WAVE TUBE OSCILLATOR

A new concept of inner-feedback-style traveling wave tube oscillator, which is based on a traveling-wave tube having a partial reflector located at near the junction between the slow-wave structure and the output coupler and a mechanical tuner connected to the input coupler, is proposed. Simulations by CHIPIC code show that the inner-feedback-style traveling wave tube oscillator having 100W of power, about 10% of electron efficiency and a tunable band of 73.35-73.91 GHz may be achieved. Compared with Backward Wave Oscillators (BWOs), the new devices have similar ability for tuning, and have much higher electron efficiency, suggesting much more potential as a Terahertz source.

Effect of cyclotron resonance on ‘hot’ dispersion in a staggered double metallic grating sheet beam travelling wave tube

Based on the beam wave synchronous interaction in transverse and longitudinal directions at the same time and starting from Maxwell’s equation and linear Vlasov equation, the beam–wave interaction ‘hot’ dispersion equation considering both cyclotron resonance and Cherenkov resonance in a staggered double metallic grating traveling wave tube is deduced.Through the reasonable selection for geometric and electrical parameters, the numerical calculation and analysis of the ‘hot’ dispersion equation shows that the beam–wave interaction gain and frequency band with the cyclotron resonance enhancement effect are higher than those with only Cherenkov resonance radiation.

A staggered double vane circuit for a W-band traveling-wave tube amplifier

Based on the combination of a staggered double vane slow wave structure （SWS） and round electron beam, a 200-W W-band traveling-wave tube （TWT） amplifier is studied in this paper. The main advantages of round beam operation over the sheet beam is that the round beam can be formed more easily and the focus requirement can be dramatically reduced. It operates in the fundamental mode at the first spatial harmonic. The geometric parameters are optimized and a transition structure for the slow wave circuit is designed which can well match the signal that enters into and goes out from the tube. Then a TWT model is established and the particle-in-cell （PIC） simulation results show that the tube can provide over 200-W output power in a frequency range of 88 GHz-103 GHz with a maximum power of 289 W at 95 GHz, on the assumption that the input power is 0.1 W and the beam power is 5.155 kW. The corresponding conversion efficiency and gain at 95 GHz are expected to be 5.6% and 34.6 dB, respectively. Such amplifiers can potentially be used in high power microwave-power-modules （MPM） and for other portable applications.

Numerical Perspective of Second-Harmonic Generation of Circumferential Guided Wave Propagation in a Circular Tube

The effect of second-harmonic generation （SHG） by primary （fundamental） circumferential guided wave （CGW） propagation is investigated from a numerical standpoint. To enable that the second harmonic of the primary CGW mode can accumulate along the circumferential direction, an appropriate mode pair of primary and double frequency CGWs is chosen. Finite element simulations and evaluations of nonlinear CGW propagation are analyzed for the selected CGW mode pair. The numerical simulations performed directly demonstrate that the response of SHG is completely generated by the desired primary CGW mode that satisfies the condition of phase velocity matching at a specific driving frequency, and that the second harmonic of the primary CGW mode does have a cumulative effect with circumferential angles. The numerical perspective obtained yields an insight into the complicated physical process of SHG of primary CGW propagation unavailable previously.

Propagation of combined longitudinal and torsional stress waves in a functionally graded thin-walled tube

An analytical model for the propagation of combined stress waves in a functionally graded thin-walled tube subjected to combined longitudinal and torsional impact loading is established.The material properties of the tube are assumed to be continuously graded along the length according to a power law function with respect to the volume fractions of the constituents.The generalized characteristic theory is used to analyze the main features of the characteristic wave speeds and simple wave solutions in the functionally graded thin-walled tube.The finite difference method is used to discretize the governing equations.Two types of typical solutions are obtained for the functionally graded tube and the homogeneous tube subjected to combined longitudinal and torsional step loading.The numerical results reveal some abnormal phenomena in the stress path and wave process of the functionally graded thin-walled tube.

Experimental Observation of Cumulative Second-Harmonic Generation of Circumferential Guided Wave Propagation in a Circular Tube

The experimental observation of cumulative second-harmonic generation of the primary circumferential guided wave propagation is reported. A pair of wedge transducers is used to generate the primary circumferential guided wave desired and to detect its fundamental-frequency and second-harmonic amplitudes on the outside surface of the circular tube. The amplitudes of the fundamental waves and the second harmonics of the circumferential guided wave propagation are measured for different separations between the two wedge transducers. At the driving frequency where the primary and the double-frequency circumferential guided waves have the same linear phase velocities, the clear second-harmonic signals can be observed. The quantitative relationships between the second-harmonic amplitudes and circumferential angle are analyzed. It is experimentally verified that the second harmonics of primary circumferential guided waves do have a cumulative growth effect with the circumferential angle.

Design and development of high linearity millimeter wave traveling-wave tube for satellite communications

The linearity of the traveling-wave tube is a very important characteristic for a modern communication system. To improve the linearity of the traveling-wave tube at no expense of the saturated output power and overall efficiency, a modified pitch profile combined with a small adjustment of operating parameters is proposed. The optimal design of the helix circuit is evaluated theoretically by a large signal analysis, and the experimental test is also carried out to make a comparison of performance between the novel and original designed traveling-wave tubes. The experiments show that the saturated output powers and efficiencies of these two tubes are close to each other, while the linearity of the traveling-wave tube is obviously improved. The total phase shift and AM/PM conversion at saturation of the novel tube, averaged over the operating band, are only 30.6°/d B and 2.5°/d B, respectively, which are 20.1°/d B and 1.6°/d B lower than those of the original tube, respectively. Moreover, the third-order intermodulation of the novel tube is up to 2.2 d Bc lower than that of the original tube.

Response features of nonlinear circumferential guided wave on early damage in inner layer of a composite circular tube

A theoretical model to analyze the nonlinear circumferential guided wave(CGW) propagation in a composite circular tube(CCT) is established. The response features of nonlinear CGWs to early damage [denoted by variations in third-order elastic constants(TOECs)] in an inner layer of CCT are investigated. On the basis of the modal expansion approach, the second-harmonic field of primary CGW propagation can be assumed to be a linear sum of a series of double-frequency CGW(DFCGW) modes. The quantitative relationship of DFCGW mode versus the relative changes in the inner layer TOECs is then investigated. It is found that the changes in the inner layer TOECs of CCT will obviously affect the driving source of DFCGW mode and its modal expansion coefficient, which is intrinsically able to influence the efficiency of cumulative second-harmonic generation(SHG) by primary CGW propagation. Theoretical analyses and numerical simulations demonstrate that the second harmonic of primary CGW is monotonic and very sensitive to the changes in the inner layer TOECs of CCT, while the linear properties of primary CGW propagation almost remain unchanged. Our results provide a potential application for accurately characterizing the level of early damage in the inner layer of CCT through the efficiency of cumulative SHG by primary CGW propagation.

Theoretical research on the performance of a practical helix travelling wave tube

On the basis of a rigorous field theory, two different physical models of attenuator and sever have been proposed. One is named High attenuation （HATT） model in which both attenuator and sever are considered as a unified attenuator, but the sever is regarded as an area of very high loss; the other is called Sever and attenuator （SATT） model in which the sever is modelled as a drift area in which the electric and magnetic fields both vanish. A complex function is derived and potential sinking effect is also considered. Thus, a set of more practical self-consistent equations of nonlinear beam-wave interaction is formulated. Simulations are carried out under the conditions of the two different physical models, and the simulation results are compared with the experimental data. The results show that in the case of single signal drive, the unknown second harmonic should be included for predicting the saturated output power. It is also evident that the SATT model and the HATT model predict the same physical nature, whereas the results predicted by the HATT model are much closer to the experimental data than those obtained from the SATT model. Therefore, these results provide a strong theoretical basis for designing broadband and high gain helix travelling wave tubes.