Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure nu...Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure numerical simulation,the structure was calculated under different input level and displacement response of the acceleration response,and analyses the force of the wear layer column and the floor of the open hole stress level.The results were compared with the shaking table test to verify the accuracy of the numerical simulation results.The results of numerical calculation were basically consistent with the experimental results,and the finite element model basically reflected the response of the structure under the simulated earthquake.展开更多
Least squares migration can eliminate the artifacts introduced by the direct imaging of irregular seismic data but is computationally costly and of slow convergence. In order to suppress the migration noise, we propos...Least squares migration can eliminate the artifacts introduced by the direct imaging of irregular seismic data but is computationally costly and of slow convergence. In order to suppress the migration noise, we propose the preconditioned prestack plane-wave least squares reverse time migration （PLSRTM） method with singular spectrum constraint. Singular spectrum analysis （SSA） is used in the preconditioning of the take-off angle-domain common-image gathers （TADCIGs）. In addition, we adopt randomized singular value decomposition （RSVD） to calculate the singular values. RSVD reduces the computational cost of SSA by replacing the singular value decomposition （SVD） of one large matrix with the SVD of two small matrices. We incorporate a regularization term into the preconditioned PLSRTM method that penalizes misfits between the migration images from the plane waves with adjacent angles to reduce the migration noise because the stacking of the migration results cannot effectively suppress the migration noise when the migration velocity contains errors. The regularization imposes smoothness constraints on the TADCIGs that favor differential semblance optimization constraints. Numerical analysis of synthetic data using the Marmousi model suggests that the proposed method can efficiently suppress the artifacts introduced by plane-wave gathers or irregular seismic data and improve the imaging quality of PLSRTM. Furthermore, it produces better images with less noise and more continuous structures even for inaccurate migration velocities.展开更多
Power integrity (PI) has become a limiting factor for the chip's overall performance, and how to place in-package decoupling capacitors to improve a chip's PI performance has become a hot issue. In this paper,...Power integrity (PI) has become a limiting factor for the chip's overall performance, and how to place in-package decoupling capacitors to improve a chip's PI performance has become a hot issue. In this paper, we propose an improved trans- mission matrix method (TMM) for fast decoupling capacitance allocation. An irregular grid partition mechanism is proposed, which helps speed up the impedance computation and complies better with the irregular power/ground (P/G) plane or planes with many vias and decoupling capacitors. Furthermore, we also ameliorate the computation procedure of the impedance matrix whenever decoupling capacitors are inserted or removed at specific ports. With the fast computation of impedance change, in-package decoupling capacitor allocation is done with an efficient change based method in the frequency domain. Experimental results show that our approach can gain about 5× speedup compared with a general TMM, and is efficient in restraining the noise on the P/G plane.展开更多
文摘Rod element and shell element were used in finite element software ABAQUS to establish dynamic elastic-plastic analysis model of the structure,the seismic performance of an irregular plane complex overrun structure numerical simulation,the structure was calculated under different input level and displacement response of the acceleration response,and analyses the force of the wear layer column and the floor of the open hole stress level.The results were compared with the shaking table test to verify the accuracy of the numerical simulation results.The results of numerical calculation were basically consistent with the experimental results,and the finite element model basically reflected the response of the structure under the simulated earthquake.
基金supported by the National Science and Technology Major Project(No.2016ZX05014-001-008)the National Key Basic Research Program of China(No.2014CB239006)+2 种基金the National Natural Science Foundation of China(Nos.41104069 and 41274124)the Open foundation of SINOPEC Key Laboratory of Geophysics(No.33550006-15-FW2099-0033)the Fundamental Research Funds for Central Universities(No.16CX06046A)
文摘Least squares migration can eliminate the artifacts introduced by the direct imaging of irregular seismic data but is computationally costly and of slow convergence. In order to suppress the migration noise, we propose the preconditioned prestack plane-wave least squares reverse time migration （PLSRTM） method with singular spectrum constraint. Singular spectrum analysis （SSA） is used in the preconditioning of the take-off angle-domain common-image gathers （TADCIGs）. In addition, we adopt randomized singular value decomposition （RSVD） to calculate the singular values. RSVD reduces the computational cost of SSA by replacing the singular value decomposition （SVD） of one large matrix with the SVD of two small matrices. We incorporate a regularization term into the preconditioned PLSRTM method that penalizes misfits between the migration images from the plane waves with adjacent angles to reduce the migration noise because the stacking of the migration results cannot effectively suppress the migration noise when the migration velocity contains errors. The regularization imposes smoothness constraints on the TADCIGs that favor differential semblance optimization constraints. Numerical analysis of synthetic data using the Marmousi model suggests that the proposed method can efficiently suppress the artifacts introduced by plane-wave gathers or irregular seismic data and improve the imaging quality of PLSRTM. Furthermore, it produces better images with less noise and more continuous structures even for inaccurate migration velocities.
基金the Ph.D Programs Foundation of Ministry of Education of China (No. 20060335065)the Natural Science Foundation of Zhejiang Province, China (No. Y106513)
文摘Power integrity (PI) has become a limiting factor for the chip's overall performance, and how to place in-package decoupling capacitors to improve a chip's PI performance has become a hot issue. In this paper, we propose an improved trans- mission matrix method (TMM) for fast decoupling capacitance allocation. An irregular grid partition mechanism is proposed, which helps speed up the impedance computation and complies better with the irregular power/ground (P/G) plane or planes with many vias and decoupling capacitors. Furthermore, we also ameliorate the computation procedure of the impedance matrix whenever decoupling capacitors are inserted or removed at specific ports. With the fast computation of impedance change, in-package decoupling capacitor allocation is done with an efficient change based method in the frequency domain. Experimental results show that our approach can gain about 5× speedup compared with a general TMM, and is efficient in restraining the noise on the P/G plane.
