Simultaneous Degradation, Dehalogenation, and Detoxification of Halogenated Antibiotics by Carbon Dioxide Radical Anions

Despite the extensive application of advanced oxidation processes(AOPs)in water treatment,the efficiency of AOPs in eliminating various emerging contaminants such as halogenated antibiotics is constrained by a number of factors.Halogen moieties exhibit strong resistance to oxidative radicals,affecting the dehalogenation and detoxification efficiencies.To address these limitations of AOPs,advanced reduction processes(ARPs)have been proposed.Herein,a novel nucleophilic reductant—namely,the carbon dioxide radical anion(CO_(2)^(·-))—is introduced for the simultaneous degradation,dehalogenation,and detoxification of florfenicol(FF),a typical halogenated antibiotic.The results demonstrate that FF is completely eliminated by CO_(2)^(·-),with approximately 100%of Cland 46%of Freleased after 120 min of treatment.Simultaneous detoxification is observed,which exhibits a linear response to the release of free inorganic halogen ions(R^(2)=0.97,p<0.01).The formation of halogen-free products is the primary reason for the superior detoxification performance of this method,in comparison with conventional hydroxyl-radical-based AOPs.Products identification and density functional theory(DFT)calculations reveal the underlying dehalogenation mechanism,in which the chlorine moiety of FF is more susceptible than other moieties to nucleophilic attack by CO_(2)^(·-).Moreover,CO_(2)^(·-)-based ARPs exhibit superior dehalogenation efficiencies(>75%)in degrading a series of halogenated antibiotics,including chloramphenicol(CAP),thiamphenicol(THA),diclofenac(DLF),triclosan(TCS),and ciprofloxacin(CIP).The system shows high tolerance to the pH of the solution and the presence of natural water constituents,and demonstrates an excellent degradation performance in actual groundwater,indicating the strong application potential of CO_(2)^(·-)-based ARPs in real life.Overall,this study elucidates the feasibility of CO_(2)^(·-)for the simultaneous degradation,dehalogenation,and detoxification of halogenated antibiotics and provides a promising method for their regulation during water or wastewater treatment.

Separation of halogens and recovery of heavy metals from secondary copper smelting dust

The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasibility of the phase transformation to metal sulfates and to gaseous HF and HCl.Under the sulfating roasting conditions of the roasting temperature of 250℃ and the sulfuric acid excess coefficient of 1.8,over 74 wt.%of F and 98 wt.%of Cl were volatilized into flue gas.Approximately 98.6 wt.%of Zn and 96.5 wt.%of Cu in the roasting product were dissolved into the leaching solution after the water leaching process,while the leaching efficiencies of Pb and Sn were only 0.12%and 0.22%,respectively.The mechanism studies indicate the pivotal effect of roasting temperature on the sulphation reactions from various metal species to metal sulfates and the salting out reactions from various metal halides to gaseous hydrogen halides.

Progress in Analytical Methods of Halogenated Disinfection By-Products

Ensuring the health and safety of drinking water is crucial for both nations and their citizens.Since the 20th century,the disinfection of drinking water,effectively controlling pathogens in water sources,has become one of the significant advances in public health.However,the disinfectants used in the process,such as chlorine and chlorine dioxide,react with natural organic matter in the water to produce disinfection by-products(DBPs).Most of these DBPs contain chlorine,and if the source water contains bromine or iodine,brominated or iodinated DBPs,collectively referred to as Halogenated disinfection byproducts(X-DBPs),are formed.Numerous studies have found that X-DBPs pose potential risks to human health and the environment,leading to widespread concern.Mass spectrometry has become an important means of discovering new types of X-DBPs.This paper focuses on the study of methods for analyzing X-DBPs in drinking water using mass spectrometry.

Textural and compositional variation of mica from the Dexing porphyry Cu deposit:constraints on the behavior of halogens in porphyry systems

The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China.Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system.Biotite from the Dexing porphyry deposit could be divided to three types:primary magmatic biotite(Bi-M),hydrothermal altered magmatic biotite(Bi-A)and hydrothermal biotite(Bi-H).The temperature of Bi-M and Bi-H range from 719 to 767℃ and 690 to 727℃,respectively.Both magmatic and hydrothermal biotite have high Fe^(3+)/Fe^(2+)ratios(from 0.18 to 0.24)and XMgvalues(from 0.57 to 0.66),indicating a high oxygen fugacity.BiM has F lower than Bi-A and Bi-H(up to 0.26 wt%),but has Cl(Cl=0.18–0.30 wt%)similar to Bi-A and Bi-H(Cl=0.21–0.35 wt%),suggesting that high Cl/F ratios of early hydrothermal fluid may result from the exsolution from high Cl magma.From potassic alteration zone to phyllic and propylitic alteration zones,Cl decreases with increasing Cu,whereas F increases roughly.Therefore,Cl mostly originate from magma,but enrichment of F possibly results from reaction of fluids and Neoproterozoic strata.Negative correlation between Cl and Cu indicates that Cl might act as an important catalyst during Cu mineralization process.Biotite from Dexing has similar halogen compositions to other porphyry Cu-/Mo deposits in the world.Chlorine contents of hydrothermal fluid may be critical for Cu transportation and enrichment,while consumption of Cl would promote Cu deposition.

Accurate Formulae for the Cross-Section Data for the Radio-Halogen I-123 from Cyclotron Production

123I is the most widely used cyclotron-produced radio-halogen in medical research. In this paper, excitation function formulae for the nuclear reactions of 123I production are introduced. 124Te (p, 2n)123I and 127I (p, 5n)123Xe → 123I nuclear reactions have been studied as a function of the energy of the neutrons. Both two formulae were created using the least squares regression of the experimental cross sections data, which were obtained from the Experimental Nuclear Reaction Data EXFOR Database version of 2023. The proposed formulae were evaluated using two statistical indicators for goodness-of-fit. High agreement was observed between the empirical and experimental results for both nuclear processes.

Light-driven activation of carbon-halogen bonds by readily available amines for photocatalytic hydrodehalogenation

A straightforward protocol using readily available aromatic amines,N,N,N',N'-tetramethyl-p-phenylenediamine or N,N,N',N'-tetramethylbenzidine,as photocatalysts was developed for theefficient hydrodehalogenation of organic halides,such as 4'-bromoacetophenone,polyfluoroarenes,cholorobenzene,and 2,2',4,4'-tetrabromodiphenyl ether(a resistant and persistent organic pollu-tant).The strongly reducing singlet excited states of the amines enabled diffusion-controlled disso-ciative electron transfer to effectively cleave carbon-halogen bonds,followed by radical hydrogena-tion.Diisopropylethylamine served as the terminal electron/proton donor and regenerated theamine sensitizers.

Inverse Halogen Bonds Interactions Involving Br Atom in the Electronic Deficiency Systems of CH3＋… Br-Y （Y--H, CCH, CN, NC）

Inverse halogen bonds interactions involving Br in the electronic deficiency systems of CH3＋...Br-Y （Y=H, CCH, CN, NC） have been investigated by B3LYP/6- 311＋＋G（d, p） and MP2/6-311＋＋G（d, p） methods. The calculated interaction energies with basis set super-position error correction of the four IXBs complexes are 218.87, 219.48, 159.18, and 143.05kJ/mol （MP2/6-311＋＋G（d, p））, respectively. The relative stabilities of the four complexes increased in the order： CH3＋ … BrCN〈CH3＋…- BrNC〈CH3＋… BrH≈CH3＋ …BrCCH. Natural bond orbital theory analysis and the chemical shifts calculation of the related atoms revealed that the charges flow from Br-Y to CH3e. Here, the Br of Br-Y acts as both a halogen bond donor and an electron donor. Therefore, compared with conventional halogen bonds, the IXBs complexes formed between Br-Y and CH3＋. Atoms-in-molecules theory has been used to investigate the topological properties of the critical points of the four IXBs structures which have more covalent content.

Quantitative structure－activity study on the reductive dehalogenation potency of the halogenated aromatics

Ｑｕａｎｔｉｔａｔｉｖｅｓｔｒｕｃｔｕｒｅ－ａｃｔｉｖｉｔｙｓｔｕｄｙｏｎｔｈｅｒｅｄｕｃｔｉｖｅｄｅｈａｌｏｇｅｎａｔｉｏｎｐｏｔｅｎｃｙｏｆｔｈｅｈａｌｏｇｅｎａｔｅｄａｒｏｍａｔｉｃｓＨｕａｎｇＱｉｎｇｇｕｏ；ＷａｎｇＬｉａｎｓｈｅｎｇ；Ｈａｎ...

Risk Points of Flame Retardant Textiles by Halogen and Halogen-Free Laminating Film

This study was to develop the flame retardant (FR) protective clothing which had multifunction such anti-bacterial, UV cut, FR function with water repellent and water vapor permeable laminating textiles for industrial workers. First of all, the FR yarn and FR textiles were developed for this purpose. Second, the comparison analysis between the halogen laminating textiles and halogen-free laminating textiles were tested to figure out the eco-friendly laminating method. Third, the flame retardant ability was compared the halogen laminated textiles to halogen-free laminated textiles. LOI, UV protection ratio, antibiosis after 50 laundry test, water proof pressure, and moisture permeability of developed textiles were tested. GC-HR-TOF-MS was used for analysis of laminating film (halogen and halogen-free). 4.1 wt% TiO2 yarn showed antibacterial function (Pneumococcus & Staphylococcus aureus: 99.9%), UV Protection (UVA: 90.8, UVB: 92.1), and LOI (33.6). The chosen optimal compounding ratio for PU compound of HRF and HFFR were as followed: PU resin 58.3%, DMF (Dimethyl formamide, δ = 12.2) 8.3%, MEK (Methylethylketone) 8.3% and FR (flame retardants) 25.0%. Binder for laminating should not be included over 10% of FRs because of adhesion between textiles and FR laminating film. There were detected phosphorus compounds in the textiles treated by halogenated type flame retardants and halogenated-free type flame retardants. There were not any detected harmful compounds from all textile samples.

QSAR Study of Halogen Phenols Toxicity to Tetrahymena Pyriformis

Structural parameters of 22 halogen phenols were computed at four levels using Hartree-Fock and DFT methods. Based on the experimental data of the acute toxicity to Tetrahymena pyriformis （-lgEC_50）, three-parameter （energy of the lowest unoccupied molecular orbital （E_LUMO）, the molecular volume （V）, and the lowest negative charge （Q_min）） dependent equations were developed using structural parameters as theoretical descriptors. Especially, -lgEC_50dependent equation calculated at the B3LYP/6-31G^＊＊ level is more advantageous than the others in view of their correlation and predictive abilities. This dependent equation was validated by variance inflation factors （VIF） and t-test methods. Upon comparison, the predictive abilities of our work are all more advantageous than those calculated from the semi-empirical PM3 method.

Halogen Bonding or Hydrogen Bonding between 2,2,6,6-Tetramethyl- piperidine-noxyl Radical and Trihalomethanes CHX3 （X=CI, Br, I）

The halogen and hydrogen bonding complexes and trihalomethanes （CHX3, X=C1, Br, I） are between 2,2,6,6-tetramethylpiperidine-noxyl simulated by computational quantum chem- istry. The molecular electrostatic potentials, geometrical parameters and interaction energy of halogen and hydrogen bonding complexes combined with natural bond orbital analysis are obtained. The results indicate that both halogen and hydrogen bonding interactions obey the order CI〈Br〈I, and hydrogen bonding is stronger than the corresponding halogen bond- ing. So, hydrogen bonding complexes should be dominant in trihalomethanes. However, it is possible that halogen bonding complex is competitive, even preponderant, in triiodomethane due to the similar interaction energy. This work might provide useful information on specific solvent effects as well as for understanding the mechanism of nitroxide radicals as a bioprobe to interact with the halogenated compounds in biological and biochemical fields.

Determination of the Toxicities of 16 Halogenated Benzenes to Photobacterium Phosphoreum and 2D- and 3D-QSAR Studies

In this paper we take photobacterium phosphoreum （T3） as the experimental bacteria, and determine the half-inhibitory concentration （-1gEC50） against the photobacterium phosphoreum of 16 halogenated benzenes. Using B3LYP method of DFT in the Gaussian 03 program, we obtain the structural and thermodynamic descriptors of 16 halogenated benzenes by fully-optimized calculation at the 6-311G＊＊ level. Taking the structural and thermodynamic descriptors as theoretical descriptors, the 2D QSAR model （R2 = 0.983） was established, which can be utilized to predict -lgEC50 of halogenated benzene according to the corrected linear solvation energy theory based on the experimental data of-lgECs0. In addition, the relationship between the toxicity and 3D spatial structure of the compound is studied by comparing the molecular similarity index analysis （CoMSIA） of 3D-QSAR method. By cross validation, the correlation coefficient q2 of CoMSIA model is 0.687, and the conventional correlation coefficient R2 = 0.958. The model is stable and reliable with great predictive ability. The 3D-QSAR model shows that the toxicity of halogenated benzene compound is mainly affected by the characteristics of hydrophobie field of the substituted halogens.

A QSRR Study on the Relative Retention Time of Halogenated Methyl-phenyl Ethers

Halogenated methyl-phenyl ethers （anisoles） are ubiquitous organic compounds in the environment. In the present study, geometrical optimization and electrostatic potential calculations have been performed for 42 halogenated anisoles at the HF/6-31 G^＊ level. A number of statistically based parameters have been obtained. By multiple regression method, linear relationships between the gas-chromatographic relative retention time （RRT） and structural descriptors have been established for the training set of 32 halogenated anisoles. The result showed that the parameters derived from electrostatic potentials （ESPs） together with the molecular volume （Vmc） could be well used to express the quantitative structure-RRT relationships of halogenated anisoles. The best two-variable regression model gives a correlation coefficient of 0.980 and a standard deviation of 0.07, and the leave-one-out cross-validated correlation coefficient is 0.975. The goodness of the model has been further validated through exploring the predictive power for the testing set of 10 halogenated anisoles.

The photodynamic therapy on Streptococcus mutans biofilms using erythrosine and dental halogen curing unit

The purpose of our study was to evaluate the effect of photodynamic therapy （PDT）, using erythrosine as a photosensitizing agent and a dental halogen curing unit as a light source, on Streptococcus mutans in a biofilm phase. The S. mutans biofilms were formed in a 24-well cell culture cluster. Test groups consisted of biofilms divided into four groups： group 1： no photosensitizer or light irradiation treatment （control group）; group 2： photosensitizer treatment alone; group 3： light irradiation alone; group 4： photosensitizer treatment and light irradiation. After treatments, the numbers of colony-forming unit （CFU） were counted and samples were examined by confocal laser scanning fluorescence microscopy （CLSM）. Only group 4 （combined treatment） resulted in significant increases in cell death, with rates of 75% and 55% after 8 h of incubation, and 74% and 42% at 12 h, for biofilms formed in brain-heart infusion （BHI） broth supplemented with 0% or O. 1% sucrose, respectively. Therefore, PDT of S. mutans biofilms using a combination of erythrosine and a dental halogen curing unit, both widely used in dental clinics, resulted in a significant increase in cell death. The PDT effects are decreased in biofilms that form in the presence of sucrose.

An assessment study of absorption effect:LED vs tungsten halogen lamp for noninvasive glucose detection

Noninvasive gluoose monitoring development is critical for diabetic patient continuous moni-toring.However,almost all the available devices are invasive and painful.Noninvasive methods such as using spectroscopy have shown some good results.Unfortunately,the drawback was that the tungsten halogen lamps 1usage that is impractical if applied on human skin.This paper compared the light emitting diode(LED)to traditional tungsten halogen lamps as light source for glucose detection where the type of light source plays an important role in achieving a good spectrum quality.Glucose concentration measurement has been developed as part of noninvasive technique using optical spectroscopy.Small change and overlapping in tungsten halogen results need to replace it with a more convenient light source such as LED.Based on the result obtained,the performance of LED for absorbance spectrum gives a signifcantly different and is directly proportional to the glucose concentration.The result shows a linear trend and scucssully detects lowest at 60 to 160 mg/dL glucose concentration.

Prediction of Infinite Dilution Activity Coefficients of Halogenated Hydrocarbons in Water

Geometrical optimization and electrostatic potential calculations have been performed for a series of halogenated hydrocarbons at the HF/Gen-6d level. A number of electrostatic potentials and the statistically based structural descriptors derived from these electrostatic potentials have been obtained. Multiple linear regression analysis and artificial neural network are employed simultaneously in this paper. The result shows that the parameters derived from electrostatic 2 potentials σtot^2, V s and ∑ Vs^＋, together with the molecular volume （Vine） can be used to express the quantitative structure-infinite dilution activity coefficients （γ^∞） relationship of halogenated hydrocarbons in water. The result also demonstrates that the model obtained by using BFGS quasiNewton neural network method has much better predictive capability than that from multiple linear regression. The goodness of the model has been validated through exploring the predictive power for the external test set. The model obtained via neural network may be applied to predict γ^∞ of other halogenated hydrocarbons not present in the data set.

The Principle of Introducing Halogen Ions Into β-FeOOH: Controlling Electronic Structure and Electrochemical Performance

Coordination tuning electronic structure of host materials is a quite effective strategy for activating and improving the intrinsic properties.Herein,halogen anion(X-)-incorporated β-FeOOH(β-FeOOH(X),X=F-,Cl-,and Br-) was investigated with a spontaneous adsorption process,which realized a great improvement of supercapacitor performances by adjusting the coordination geometry.Experiments coupled with theoretical calculations demonstrated that the change of Fe-O bond length and structural distortion of β-FeOOH,which is rooted in halogen ions embedment,led to the relatively narrow band gap.Because of the strong electronegativity of X-,the Fe element in β-FeOOH(X)s presented the unexpected high valence state(3+δ),which is facilitating to adsorb S032-species.Consequently,the designed β-FeOOH(X)s exhibited the good electric conductivity and enhanced the contact between electrode and electrolyte.When used as a negative electrode,the β-FeOOH(F) showed the excellent specific capacity of 391.9 F g-1 at 1 A g-1 current density,almost tenfold improvement compared with initial β-FeOOH,with the superior rate capacity and cyclic stability.This combinational design principle of electronic structure and electrochemical performances provides a promising way to develop advanced electrode materials for supercapacitor.

Theoretical Study of Halogen Effect in Isomerization of 2-Halo-[9]-annulen Anion at the DFT Level

Cis-trans isomerization of [9]-annulenanion（1） and its 2-fluoro-,2-chloro-and 2-bromo-derivatives（2,3 and 4,respectively） were investigated at the HF/6-31G＊ and B3LYP/6-311＋＋G＊＊ levels of theory.Cis,cis,cis,cis structures appear more stable than their corresponding cis,cis,cis,trans-isomers.The relative height of energy barriers for cis-trans isomerization is：2cis 〉1cis 〉3cis〉 4cis.This trend for the reverse trans-cis isomerization follows the electronegativity of the substituent at C-2（2trans 3trans 4trans 1trans）.

High halogenated nitrobenzene hydrogenation selectivity over nano Ir particles

The selective hydrogenation of halogenated nitrobenzene over noble metal catalysts(Pd, Pt, and Ir) has attracted much attention owing to its high efficiency and environmental friendliness. However, the effect of size on the catalytic performance varies among different metal catalysts. In this study, sub-nano(<3 nm) Ir and Pd particles were prepared, and their catalytic properties for hydrogenation of halogenated nitrobenzene were evaluated.Results show that high selectivity(N 99%) was achieved over small Ir nanoparticles, in which the selectivity over the Pd with same size was much lower than that on Ir nanoparticles. Meanwhile, Ir and Pd have different hydrogen consumption rates and reaction rates. Density functional theory calculations showed that p-chloronitrobenzene(CNB) has different adsorption properties on Ir and Pd. The distance between oxygen(cholorine) and Ir is much shorter(longer) than that between oxygen and Pd. The reaction barriers of dechlorination of p-CNB and p-chloroaniline over different Ir models are much larger than those on Pd. Especially,lower coordination of Ir leads to larger barriers of dechlorination reaction. These theoretical results explain the difference between Ir and Pd on hydrogenation of halogenated nitrobenzene.

Halogen Storage Electrode Materials for Rechargeable Batteries

The ever-increasing demand for rechargeable batteries with high energy density,abundant resources,and high safety has pushed the development of various battery technologies based on cation,anion,or dual-ion transfer.The use of halogen storage electrode materials has led to new concept battery systems such as halide-ion batteries(HIB)and dual-ion batteries(DIB).This review highlights the recent progress on these electrode materials,including metal(oxy)halides,layered double hydroxides,MXenes,graphite-based materials,and organic materials with carbon or nitrogen redox centers.The reversible electrochemical halogen storage of halide ions(e.g.,F^(−),Cl^(−),and Br^(−)),dual halogen(e.g.,Br_(m)Cl_(n) and [ICl_(2)]^(−)),or binary halide anions(e.g.,PF_(6)^(−),AlCl_(4)^(−),[ZnCl_(x)]^(2−x),and [MgCl_(x)]^(2−x)) in the electrodes is covered.The challenges and mechanisms of halogen storage in various electrode materials in HIBs and DIBs are summarized and analyzed,providing insights into the development of high-performance halogen storage electrode materials for rechargeable batteries.