HDD法粘结NdFeB磁体的磁性能

研究了NdFeB合金成分、均匀化处理和HDD处理脱氢过程对磁性粉末及粘结磁体磁性能的影响。实验表明,HDD法制备的NdFeB粉末具有较好的温度稳定性和时间稳定性。

获得高矫顽力NdFeB粉末的新途径——HDD法

利用NdFeB铸锭在氢气氛下的吸氢-脱氢作用获得高矫顽力的磁性粉末。其永磁性能与急冷技术制取的NdFeB粉末相当。粉末所具行的高矫顽力是与氢处理过程产生的微细晶粒结构相联系。

HDD法制备各向异性NdFeB磁粉的研究

本文探讨了用吸氢—歧化—脱氢(HDD)工艺制取各向异性NdFeB永磁粉末的可能性。研究了成份、氢处理工艺以及后处理等对各向异性现象的影响。研究结果表明,在Nd_xFe_(87)-x-yCo_6B_7Zr_y的合金中经适当的氢气处理,初步获得了各向异性磁粉,由M115型振动样品磁强计所测磁粉的磁性能为:B_r=0.92emu/gm,iH_c=720kA/m(9kOe),(BH)_(max)=112kJ/m^3(14MGOe)。由该粉与3％(重量百分比)的环氧树脂混合制成的各向异性粘结磁体的磁性能为B_r=0.65T,iH_c=744kA/m(9.3kOe),(BH)_(max)=64k3/m^3(8MGOe)。本文还观察了各向异性粉的微观结构。

Design of Intersample Response in a Hard Disk Control System

The present paper discusses a design method for the head position in a Hard Disk Drive （HDD） control system. In the HDD control system, the sampling interval of the head position is constrained because of the hardware specifications, but the hold interval of the control input is not constrained. In the present study, a multirate control system is designed, in which the sampling and the hold intervals are not equal. A multirate control law, which stabilizes a closed-loop system, is extended using newly introduced parameters such that the sample response of the plant output is maintained. Furthermore, intersample ripples in the steady state are eliminated using the new design parameters, which can be selected independently of the sample response. As a result, the intersample response can be improved independently of the sample response. The proposed method is applied to a benchmark problem of an HDD system, and its effectiveness is demonstrated.