Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell ra...Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell radii and complicated network architectures. A coverage extension scheme using large-scale antenna arrays(LSAAs) has been suggested and theoretically proven to be cost-efficient in combination with ultradense small cell networks. To analyze and optimize the LSAA-based network deployments, a comprehensive survey of recent advances in statistical mmWave channel modeling is first presented in terms of channel parameter estimation, large-scale path loss models, and small-scale cluster models. Next, the measurement and modeling results at two 5G candidate mmWave bands(e.g., 28 GHz and 39 GHz) are reviewed and compared in several outdoor scenarios of interest, where the propagation characteristics make crucial contributions to wireless network designs. Finally, the coverage behaviors of systems employing a large number of antenna arrays are discussed, as well as some implications on future mmWave cellular network designs.展开更多
The high frequency-very high frequency(HF-VHF)frequency band is of significant importance in astronomical observations,with applications studying various phenomena such as space weather,solar radio emissions,planetary...The high frequency-very high frequency(HF-VHF)frequency band is of significant importance in astronomical observations,with applications studying various phenomena such as space weather,solar radio emissions,planetary eruptions in the solar system,pulsars,transient sources,and reionization of the early universe.This article introduces the HF-VHF frequency band multifunctional radio astronomical terminal system based on a dual-channel high-speed acquisition board with a frequency observation range of 1-250 MHz and a sampling rate of 500 Msps(Mega samples per second).The maximum quantization bit of the system is 14 bits,with a maximum time resolution of 0.1 s and a maximum spectral resolution of 16 kHz.The system combines spectral analysis of solar radio signals and recording of time-domain data of signals interfering with long baselines,and adopts a server-client separation mode to allow remote operation with separate permissions.It is used in the China-Malaysia joint astronomy project,which can carry out single-site observation of solar radio signals as well as interferometric observation of signals from multiple sites.展开更多
In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF)...In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF). The purpose of this design is to receive wireless charge for hearing aids and basically for any electronic device which is not required to a high energy for being setup. In this study, it has been demonstrated that as the amount of radio receiving energy increases, distance of receiver from antenna should be decreased;otherwise, either maximum amount of the receiving energy, or signal power density of the transmitter should be increased. Since it is impossible to be performed, it is decided to set up an energy receiving system constructed by rectenna and charge Circuit and to adjust their parameters to provide energy requirements for a device with low-power consumption. In this paper, different components of an energy receiving system from radio frequency band have been mentioned and a diagram block has been suggested. Subsequently, input impedance of designed antenna has been adjusted by provided relations. This impedance should be adjusted with the total impedance of regarded hearing aid Circuit by which the highest amount of received signal power is transferred to the battery of hearing aids. Received signal is converted to a dc voltage by rectifier diode. Finally, by applying a voltage regulator which has been designed using a common-collector amplifier not only the output voltage is kept constant, but the power is also strengthened. The battery of the hearing aids will be charged using the obtained power and voltage.展开更多
The Five-hundred-meter Aperture Spherical Radio Telescope(FAST)Core Array is a proposed extension of FAST,integrating 24 secondary 40-m antennas implanted within 5 km of the FAST site.This original array design will c...The Five-hundred-meter Aperture Spherical Radio Telescope(FAST)Core Array is a proposed extension of FAST,integrating 24 secondary 40-m antennas implanted within 5 km of the FAST site.This original array design will combine the unprecedented sensitivity of FAST with a high angular resolution(4.3"at a frequency of 1.4 GHz),thereby exceeding the capabilities at similar frequencies of next-generation arrays such as the Square Kilometre Array Phase 1 or the next-generation Very Large Array.This article presents the technical specifications of the FAST Core Array,evaluates its potential relatively to existing radio telescope arrays,and describes its expected scientific prospects.The proposed array will be equipped with technologically advanced backend devices,such as real-time signal processing systems.A phased array feed receiver will be mounted on FAST to improve the survey efficiency of the FAST Core Array,whose broad frequency coverage and large field of view(FOV)will be essential to study transient cosmic phenomena such as fast radio bursts and gravitational wave events,to conduct surveys and resolve structures in neutral hydrogen galaxies,to monitor or detect pulsars,and to investigate exoplanetary systems.Finally,the FAST Core Array can strengthen China's major role in the global radio astronomy community,owing to a wide range of potential scientific applications from cosmology to exoplanet science.展开更多
The Square Kilometre Array(SKA) will be the world’s largest synthesis radio telescope, which is designed to answer major scientific questions such as those relating to the cosmic origin and fundamental forces in the ...The Square Kilometre Array(SKA) will be the world’s largest synthesis radio telescope, which is designed to answer major scientific questions such as those relating to the cosmic origin and fundamental forces in the universe. With the SKA entering into the phase of pre-construction, more than 100 institutes in about 20 countries including China have been involved in the associated key technology development.The Dish Verification Antenna China(DVA-C) is a concept prototype which has been built to meet the requirements of the SKA’s scientific goals. It utilizes a unique skin-and-rib structure with single-piece panel reflectors. This paper presents details on the design and measured performances of DVA-C, as well as the preliminary observational results. Current applications of the DVA-C are also introduced.展开更多
We present a forecast of the cosmological parameter estimation using fast radio bursts(FRBs)from the upcoming Square Kilometre Array(SKA),focusing on the issues of dark energy,the Hubble constant,and baryon density.We...We present a forecast of the cosmological parameter estimation using fast radio bursts(FRBs)from the upcoming Square Kilometre Array(SKA),focusing on the issues of dark energy,the Hubble constant,and baryon density.We simulate 105and 106localized FRBs from a 10-year SKA observation,and find that:(1)using 106FRB data alone can tightly constrain dark-energy equation of state parameters better than CMB+BAO+SNe,providing an independent cosmological probe to explore dark energy;(2)combining the FRB data with gravitational-wave standard siren data from 10-year observation with the Einstein Telescope,the Hubble constant can be constrained to a sub-percent level,serving as a powerful low-redshift probe;(3)using 106FRB data can constrain the baryon density?bh to a precision of~0.1%.Our results indicate that SKA-era FRBs will provide precise cosmological measurements to shed light on both dark energy and the missing baryon problem,and help resolve the Hubble tension.展开更多
w-Projection is a wide-field imaging technique that is widely used in radio synthesis arrays. Processing the wide-field big data generated by the future Square Kilometre Array(SKA) will require significant updates to ...w-Projection is a wide-field imaging technique that is widely used in radio synthesis arrays. Processing the wide-field big data generated by the future Square Kilometre Array(SKA) will require significant updates to current methods to significantly reduce the time consumed on data processing. Data loading and gridding are found to be two major time-consuming tasks in w-projection. In this paper, we investigate two parallel methods of accelerating w-projection processing on multiple nodes: the hybrid Message Passing Interface(MPI) and Open Multi-Processing(OpenMP) method based on multicore Central Processing Units(CPUs) and the hybrid MPI and Compute Unified Device Architecture(CUDA)method based on Graphics Processing Units(GPUs). Both methods are successfully employed and operated in various computational environments, confirming their robustness. The experimental results show that the total runtime of both MPI + OpenMP and MPI + CUDA methods is significantly shorter than that of single-thread processing. MPI + CUDA generally shows faster performance when running on multiple nodes than MPI + OpenMP, especially on large numbers of nodes. The single-precision GPU-based processing yields faster computation than the double-precision processing; while the single-and doubleprecision CPU-based processing shows consistent computational performance. The gridding time remarkably increases when the support size of the convolution kernel is larger than 8 and the image size is larger than 2,048 pixels. The present research offers useful guidance for developing SKA imaging pipelines.展开更多
The Square Kilometre Array(SKA)project consists of delivering two largest radio telescope arrays being built by the SKA Observatory(SKAO),which is an intergovernmental organization bringing together nations from aroun...The Square Kilometre Array(SKA)project consists of delivering two largest radio telescope arrays being built by the SKA Observatory(SKAO),which is an intergovernmental organization bringing together nations from around the world with China being one of the major member countries.The computing resources needed to process,distribute,curate and use the vast amount of data that will be generated by the SKA telescopes are too large for the SKAO to manage on its own.To address this challenge,the SKAO is working with the international community to create a shared,distributed data,computing and networking capability called the SKA Regional Centre Alliance.In this model,the SKAO will be supported by a global network of SKA Regional Centres(SRCs)distributed around the world in its member countries to build an end-to-end science data system that will provide astronomers with high-quality science products.SRCs undertake deep processing,scientific analysis,and long-term storage of the SKA data,as well as user support.China has been actively participating in and promoting the construction of SRCs.This paper introduces the international cooperation and ongoing prototyping of the global SRC network,the basis for the construction of the China SRC and describes in detail the progress of the China SRC prototype.The paper also presents examples of scientific applications of SKA precursor and pathfinder telescopes performed using resources from the China SRC prototype.Finally,the future prospects of the China SRC are presented.展开更多
基金supported in part by the National Natural Science Foundation of China under Grant No.61671145the Key R&D Program of Jiangsu Province of China under Grant BE2018121
文摘Millimeter-wave(mm Wave) communications will be used in fifth-generation(5G) mobile communication systems, but they experience severe path loss and have high sensitivity to physical objects, leading to smaller cell radii and complicated network architectures. A coverage extension scheme using large-scale antenna arrays(LSAAs) has been suggested and theoretically proven to be cost-efficient in combination with ultradense small cell networks. To analyze and optimize the LSAA-based network deployments, a comprehensive survey of recent advances in statistical mmWave channel modeling is first presented in terms of channel parameter estimation, large-scale path loss models, and small-scale cluster models. Next, the measurement and modeling results at two 5G candidate mmWave bands(e.g., 28 GHz and 39 GHz) are reviewed and compared in several outdoor scenarios of interest, where the propagation characteristics make crucial contributions to wireless network designs. Finally, the coverage behaviors of systems employing a large number of antenna arrays are discussed, as well as some implications on future mmWave cellular network designs.
基金supported by National Natural Science Foundation of China(U2031133)National Key Research and Development Program of China(11941003)+4 种基金Applied Basic Research Program of Yunnan Province(2019FB009)Basic Research Program of Yunnan Province(202301AT070325)Square Kilometer Array(SKA)Project of the Ministry of Science and Technology of China(2020SKA0110202)International Partnership Program of the Chinese Academy of Sciences(114A11KYSB20200001)Kunming Municipal Foreign(International)Cooperation Base Project(GHJD-2021022).
文摘The high frequency-very high frequency(HF-VHF)frequency band is of significant importance in astronomical observations,with applications studying various phenomena such as space weather,solar radio emissions,planetary eruptions in the solar system,pulsars,transient sources,and reionization of the early universe.This article introduces the HF-VHF frequency band multifunctional radio astronomical terminal system based on a dual-channel high-speed acquisition board with a frequency observation range of 1-250 MHz and a sampling rate of 500 Msps(Mega samples per second).The maximum quantization bit of the system is 14 bits,with a maximum time resolution of 0.1 s and a maximum spectral resolution of 16 kHz.The system combines spectral analysis of solar radio signals and recording of time-domain data of signals interfering with long baselines,and adopts a server-client separation mode to allow remote operation with separate permissions.It is used in the China-Malaysia joint astronomy project,which can carry out single-site observation of solar radio signals as well as interferometric observation of signals from multiple sites.
文摘In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF). The purpose of this design is to receive wireless charge for hearing aids and basically for any electronic device which is not required to a high energy for being setup. In this study, it has been demonstrated that as the amount of radio receiving energy increases, distance of receiver from antenna should be decreased;otherwise, either maximum amount of the receiving energy, or signal power density of the transmitter should be increased. Since it is impossible to be performed, it is decided to set up an energy receiving system constructed by rectenna and charge Circuit and to adjust their parameters to provide energy requirements for a device with low-power consumption. In this paper, different components of an energy receiving system from radio frequency band have been mentioned and a diagram block has been suggested. Subsequently, input impedance of designed antenna has been adjusted by provided relations. This impedance should be adjusted with the total impedance of regarded hearing aid Circuit by which the highest amount of received signal power is transferred to the battery of hearing aids. Received signal is converted to a dc voltage by rectifier diode. Finally, by applying a voltage regulator which has been designed using a common-collector amplifier not only the output voltage is kept constant, but the power is also strengthened. The battery of the hearing aids will be charged using the obtained power and voltage.
基金supported by the National Key R&D Program of China(2022YFA1602904)the Chinese Academy of Sciences Project for Young Scientists in Basic Research(YSBR-063)the National Natural Science Foundation of China(12225303 and 12041301).
文摘The Five-hundred-meter Aperture Spherical Radio Telescope(FAST)Core Array is a proposed extension of FAST,integrating 24 secondary 40-m antennas implanted within 5 km of the FAST site.This original array design will combine the unprecedented sensitivity of FAST with a high angular resolution(4.3"at a frequency of 1.4 GHz),thereby exceeding the capabilities at similar frequencies of next-generation arrays such as the Square Kilometre Array Phase 1 or the next-generation Very Large Array.This article presents the technical specifications of the FAST Core Array,evaluates its potential relatively to existing radio telescope arrays,and describes its expected scientific prospects.The proposed array will be equipped with technologically advanced backend devices,such as real-time signal processing systems.A phased array feed receiver will be mounted on FAST to improve the survey efficiency of the FAST Core Array,whose broad frequency coverage and large field of view(FOV)will be essential to study transient cosmic phenomena such as fast radio bursts and gravitational wave events,to conduct surveys and resolve structures in neutral hydrogen galaxies,to monitor or detect pulsars,and to investigate exoplanetary systems.Finally,the FAST Core Array can strengthen China's major role in the global radio astronomy community,owing to a wide range of potential scientific applications from cosmology to exoplanet science.
基金supported by the Chinese Ministry of Science and Technology under Projects of International Cooperation and Exchange (11261140641)the State Key Development Program for Basic Research (2013CB837900)+1 种基金the State Program for High-Tech Research and Development (SS2014AA122001)the National Natural Science Foundation of China (Grant No. 11673031)
文摘The Square Kilometre Array(SKA) will be the world’s largest synthesis radio telescope, which is designed to answer major scientific questions such as those relating to the cosmic origin and fundamental forces in the universe. With the SKA entering into the phase of pre-construction, more than 100 institutes in about 20 countries including China have been involved in the associated key technology development.The Dish Verification Antenna China(DVA-C) is a concept prototype which has been built to meet the requirements of the SKA’s scientific goals. It utilizes a unique skin-and-rib structure with single-piece panel reflectors. This paper presents details on the design and measured performances of DVA-C, as well as the preliminary observational results. Current applications of the DVA-C are also introduced.
基金supported by the National SKA Program of China(Grant Nos.2022SKA01102002022SKA0110203)+1 种基金the National Natural Science Foundation of China(Grant Nos.11975072,11835009,11875102,and 11988101)the National 111 Project of China(Grant No.B16009)。
文摘We present a forecast of the cosmological parameter estimation using fast radio bursts(FRBs)from the upcoming Square Kilometre Array(SKA),focusing on the issues of dark energy,the Hubble constant,and baryon density.We simulate 105and 106localized FRBs from a 10-year SKA observation,and find that:(1)using 106FRB data alone can tightly constrain dark-energy equation of state parameters better than CMB+BAO+SNe,providing an independent cosmological probe to explore dark energy;(2)combining the FRB data with gravitational-wave standard siren data from 10-year observation with the Einstein Telescope,the Hubble constant can be constrained to a sub-percent level,serving as a powerful low-redshift probe;(3)using 106FRB data can constrain the baryon density?bh to a precision of~0.1%.Our results indicate that SKA-era FRBs will provide precise cosmological measurements to shed light on both dark energy and the missing baryon problem,and help resolve the Hubble tension.
基金National Key R&D Programme of China(2018YFA0404603)Chinese Academy of Sciences(114231KYSB20170003)+3 种基金National Supercomputer Centre in Guangzhou and resource of the Pawsey Supercomputing Centre funded from the Australian Government and the Government of Western Australiasupported by National Natural Science Foundation of China(U1831204 and 11703069)the Guangxi Cooperative Innovation Center of Cloud Computing and Big Data(No.1716)the Guangxi Colleges and Universities Key Laboratory of cloud computing and complex systems
文摘w-Projection is a wide-field imaging technique that is widely used in radio synthesis arrays. Processing the wide-field big data generated by the future Square Kilometre Array(SKA) will require significant updates to current methods to significantly reduce the time consumed on data processing. Data loading and gridding are found to be two major time-consuming tasks in w-projection. In this paper, we investigate two parallel methods of accelerating w-projection processing on multiple nodes: the hybrid Message Passing Interface(MPI) and Open Multi-Processing(OpenMP) method based on multicore Central Processing Units(CPUs) and the hybrid MPI and Compute Unified Device Architecture(CUDA)method based on Graphics Processing Units(GPUs). Both methods are successfully employed and operated in various computational environments, confirming their robustness. The experimental results show that the total runtime of both MPI + OpenMP and MPI + CUDA methods is significantly shorter than that of single-thread processing. MPI + CUDA generally shows faster performance when running on multiple nodes than MPI + OpenMP, especially on large numbers of nodes. The single-precision GPU-based processing yields faster computation than the double-precision processing; while the single-and doubleprecision CPU-based processing shows consistent computational performance. The gridding time remarkably increases when the support size of the convolution kernel is larger than 8 and the image size is larger than 2,048 pixels. The present research offers useful guidance for developing SKA imaging pipelines.
基金supported by the National Key R&D Program of China(Grant No.2018YFA0404603)Chinese Academy of Sciences International Partner Program(Grant No.114231KYSB20170003)+2 种基金National Natural Science Foundation of China(Grant No.12041301)Youth Innovation Promotion AssociationChinese Academy of Sciences(Grant Nos.201664,and2021258)。
文摘The Square Kilometre Array(SKA)project consists of delivering two largest radio telescope arrays being built by the SKA Observatory(SKAO),which is an intergovernmental organization bringing together nations from around the world with China being one of the major member countries.The computing resources needed to process,distribute,curate and use the vast amount of data that will be generated by the SKA telescopes are too large for the SKAO to manage on its own.To address this challenge,the SKAO is working with the international community to create a shared,distributed data,computing and networking capability called the SKA Regional Centre Alliance.In this model,the SKAO will be supported by a global network of SKA Regional Centres(SRCs)distributed around the world in its member countries to build an end-to-end science data system that will provide astronomers with high-quality science products.SRCs undertake deep processing,scientific analysis,and long-term storage of the SKA data,as well as user support.China has been actively participating in and promoting the construction of SRCs.This paper introduces the international cooperation and ongoing prototyping of the global SRC network,the basis for the construction of the China SRC and describes in detail the progress of the China SRC prototype.The paper also presents examples of scientific applications of SKA precursor and pathfinder telescopes performed using resources from the China SRC prototype.Finally,the future prospects of the China SRC are presented.