Study on welding process performance of HG70D high strength steel plate

In this paper, the performance of HG70D welded joint of ultra-high strength steel plates is presented, and the performance of HG70D and Q345B welded joints is studied. The high strength steel plate HG70D showed excellent weldability. Through the X-ray inspection of welded joints, tensile strength, impact test and bending performance test, the comprehensive performance of the joint was excellent. The macroscopic and microscopic metallographic analysises of the welded joints show that the welding seams included pearlite, sorbite, ferrite, etc. The influence of stress annealing temperature on HG70D of high strength steel plate was analyzed by heat treatment.

HG70D高强钢焊接工艺研究

采用不同强度级别的焊丝对HG70D钢焊接接头进行了强度匹配工艺试验研究,试验过程中根据焊接接头强度匹配的原则,分别选用JM^(TM)-68、JM^(TM)-100、JM^(TM)-110等三种不同强度级别的焊丝进行焊接工艺试验研究,并研究了焊接接头力学性能。结果表明,采用JM^(TM)-100型焊丝焊接的接头与HG70D钢匹配性最佳。同时采用JM^(TM)-100型焊丝作为焊接材料,分别研究了在室温、预热90℃、预热150℃3种情况下力学性能,确定了HG70D的预热温度为90℃左右能够有效的避免焊缝区出现淬硬组织。