In this work,the factors affecting asphaltenes deposition in high-temperature and high-pressure wells were studied using backscattered light and PVT equipment customized to suit the well conditions.In an examination o...In this work,the factors affecting asphaltenes deposition in high-temperature and high-pressure wells were studied using backscattered light and PVT equipment customized to suit the well conditions.In an examination of the intensity of backscattered light,it was revealed that there exists a linear relationship between temperature and asphaltene precipitation within a specific temperature range.Within this range,a decrease in temperature tends to accelerate asphaltene precipitation.However,the impacts of pressure and gas-oil ratio are more pronounced.The pressure depletion induces the asphaltenes to precipitate out of the solution,followed by the formation of flocs below the bubble point.In addition,an increase in the gas-oil ratio causes a more severe asphaltene deposition,shifting the location of asphaltenes to deep well sections.展开更多
Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulatio...Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulation.However,conventional LCMs seem ineffective in high-temperature formations.This may be due to the changes in the mechanical properties of LCMs and their sealing performance under high-temperature conditions.To understand how high temperature affects the fracture sealing performance of LCMs,we developed a coupled computational fluid dynamics-discrete element method(CFD-DEM)model to simulate the behavior of granular LCMs in fractures.We summarized the literature on the effects of high temperature on the mechanical properties of LCMs and the rheological properties of drilling fluid.We conducted sensitivity analyses to investigate how changing LCM slurry properties affected the fracture sealing efficiency at increasing temperatures.The results show that high temperature reduces the size,strength,and friction coefficient of LCMs as well as the drilling fluid viscosity.Smaller,softer,and less frictional LCM particles have lower bridging probability and slower bridging initiation.Smaller particles tend to form dual-particle bridges rather than single-particle bridges.These result in a deeper,tighter,but unstable sealing zone.Reduced drilling fluid viscosity leads to faster and shallower sealing zones.展开更多
This study presents a new multiphase flow model with transient heat transfer and pressure coupling to simulate HTHP(high temperature and high pressure)sour gas“kicks”phenomena.The model is intended to support the es...This study presents a new multiphase flow model with transient heat transfer and pressure coupling to simulate HTHP(high temperature and high pressure)sour gas“kicks”phenomena.The model is intended to support the estimation of wellbore temperature and pressure when sour gas kicks occur during drilling operation.The model considers sour gas solubility,phase transition and effects of temperature and pressure on the physical parameters of drilling fluid.Experimental data for a large-diameter pipe flow are used to validate the model.The results indicate that with fluid circulation,the annulus temperature with H2S kicks is the highest,followed by CO_(2),and CH_(4) is the lowest.The phase transition point of H2S is closer to wellhead compared with CO_(2),resulting in a faster expansion rate,which is more imperceptible and dangerous.With fluid circulation,the drilling fluid density and plastic viscosity both first decrease and then increase with the increase in the well depth.The bottom hole pressure when H2S kicks is greater than that for CO_(2) with the same amount of sour gas,and the pressure difference gradually increases with the increase of H2S/CO_(2) content.In addition,a parametric sensitivity analysis has been conducted to evaluate qualitatively and rank the influential factors affecting the bottom hole temperature and pressure.展开更多
基金This work was supported by the National Natural Science Foundation of China(No.52174047)the China Scholarship Council(No.202106440102)the PetroChina Strategic Cooperation Science and Technology Project(No.ZLZX 2020-01).
文摘In this work,the factors affecting asphaltenes deposition in high-temperature and high-pressure wells were studied using backscattered light and PVT equipment customized to suit the well conditions.In an examination of the intensity of backscattered light,it was revealed that there exists a linear relationship between temperature and asphaltene precipitation within a specific temperature range.Within this range,a decrease in temperature tends to accelerate asphaltene precipitation.However,the impacts of pressure and gas-oil ratio are more pronounced.The pressure depletion induces the asphaltenes to precipitate out of the solution,followed by the formation of flocs below the bubble point.In addition,an increase in the gas-oil ratio causes a more severe asphaltene deposition,shifting the location of asphaltenes to deep well sections.
基金The authors gratefully acknowledge the financial support from the National Natural Science Foundation of China(Grant No.52274009)China Postdoctoral Science Foundation(Grant No.2022M723501)Science and Technology Planning Project of Sichuan Province(Grant No.2021YJ0359).
文摘Lost circulation is a common downhole problem of drilling in geothermal and high-temperature,high-pressure(HTHP)formations.Lost circulation material(LCM)is a regular preventive and remedial measure for lost circulation.However,conventional LCMs seem ineffective in high-temperature formations.This may be due to the changes in the mechanical properties of LCMs and their sealing performance under high-temperature conditions.To understand how high temperature affects the fracture sealing performance of LCMs,we developed a coupled computational fluid dynamics-discrete element method(CFD-DEM)model to simulate the behavior of granular LCMs in fractures.We summarized the literature on the effects of high temperature on the mechanical properties of LCMs and the rheological properties of drilling fluid.We conducted sensitivity analyses to investigate how changing LCM slurry properties affected the fracture sealing efficiency at increasing temperatures.The results show that high temperature reduces the size,strength,and friction coefficient of LCMs as well as the drilling fluid viscosity.Smaller,softer,and less frictional LCM particles have lower bridging probability and slower bridging initiation.Smaller particles tend to form dual-particle bridges rather than single-particle bridges.These result in a deeper,tighter,but unstable sealing zone.Reduced drilling fluid viscosity leads to faster and shallower sealing zones.
基金financial supported by the National Natural Science Foundation of China(Contract Nos.51904034,51734010).
文摘This study presents a new multiphase flow model with transient heat transfer and pressure coupling to simulate HTHP(high temperature and high pressure)sour gas“kicks”phenomena.The model is intended to support the estimation of wellbore temperature and pressure when sour gas kicks occur during drilling operation.The model considers sour gas solubility,phase transition and effects of temperature and pressure on the physical parameters of drilling fluid.Experimental data for a large-diameter pipe flow are used to validate the model.The results indicate that with fluid circulation,the annulus temperature with H2S kicks is the highest,followed by CO_(2),and CH_(4) is the lowest.The phase transition point of H2S is closer to wellhead compared with CO_(2),resulting in a faster expansion rate,which is more imperceptible and dangerous.With fluid circulation,the drilling fluid density and plastic viscosity both first decrease and then increase with the increase in the well depth.The bottom hole pressure when H2S kicks is greater than that for CO_(2) with the same amount of sour gas,and the pressure difference gradually increases with the increase of H2S/CO_(2) content.In addition,a parametric sensitivity analysis has been conducted to evaluate qualitatively and rank the influential factors affecting the bottom hole temperature and pressure.
