使用不同环钻系统的穿透性角膜移植术的长期疗效:来自Halle/Saale大学眼科中心和HeliosAue眼科医院的临床研究

Background: The results of penetrating keratoplasty in two centres for cornea transplantation were investigated with regard to the following parameters: the t rephine system used, the origin of the donor cornea, the influence on the postop erative astigmatism and other aspects. Patients and Methods: The retrospective c linical investigation reports about the results of 186 patients with penetrating keratoplasty from the University Eye Hospital of Halle and 204 patients from th e Eye Clinic of the Helios hospital Aue. Results: Three trephine systems have be en used: the Hessburg-Barron trephine, the guided trephine system (GTS) and the Asmotom device. There were no significant differences between them concerning v isual acuity after 12 months postoperatively. The results were highly significan tly better (P=0.003 Halle; P=0.001 Aue) when using larger diameters of the treph ine (7.5 mm and 8.0 mm). The origin of the donor cornea (“fresh”cornea from a deceased subject or organ cultivated cornea from a cornea bank) had no influence on visual outcome after twelve months (P > 0.8). There were less wound dehiscen ces using the double running suture in comparison with other techniques (P=0.05) . The removal of suturing material was not effective in reducing postoperative a stigmatism (P > 0.11). There was no increase in astigmatism when leaving the sut ures in situ (P > 0.25). Conclusions: Generally, each of the three trephine syst ems can be recommended for clinical use. The trephination should be done with tr ephine diameters of 7.5 mm or 8.0 mm. A timely operation guarantees better visua l acuity at one year postoperatively.

Hall技术治疗孤独症儿童乳磨牙龋齿的临床研究

目的:观察Hall技术用于孤独症儿童乳磨牙龋齿的临床疗效。方法:纳入4~8岁乳磨牙龋齿的患儿80例,正常儿童和孤独症儿童各40例,共153颗乳磨牙,随机数字法分别分组,正常儿童分为树脂充填组(CR)38颗和Hall技术治疗组(CH)39颗,孤独症儿童分为树脂充填组(AR)37颗和Hall技术治疗组(AH)38颗,给予相应治疗,记录操作时间、Frankl评分、Houpt评分、家长满意率,6、12、18和24月复查效果。结果:CH组与AH组从操作时间、依从性、Houpt评分和6、12、18和24月复查效果方面比较均无统计学差异(P>0.05)。AR组家长满意度最低(P<0.05)。24月复查HALL技术治疗组成功率高于树脂充填组(P<0.05)。结论:Hall技术是一种有效且优于传统树脂充填用于治疗孤独症儿童乳磨牙龋齿的方法。

Hall技术治疗乳磨牙龋的临床疗效观察

目的:通过队列研究观察用Hall技术治疗乳磨牙龋的临床疗效,探讨影响成功率的因素。方法:选择2020年3月至2022年6月就诊的乳磨牙龋患者31例(31颗患牙),用Hall技术治疗。术后12~39个月复查,通过颞下颌关节和治疗牙有无症状、临床检查和根尖X线片进行疗效评价。采用Kaplan-Meier生存分析统计成功率,Log-Rank检验分析不同因素对成功率的影响。结果:30例患者[年龄(4.9±1.5)岁(3.3~8.2岁),男21例,女9例]接受了12个月以上复查,总体成功率是93.3%;术后1年和2年的累积生存概率是96.7%和92.3%。年龄、牙位、洞形和ICDAS冠部龋影像学检查编码等因素对成功率均无统计学意义(P>0.05)。结论:用Hall技术治疗乳磨牙龋可获得良好疗效,年龄、牙位、洞形和龋坏深度等因素不影响成功率。

Thrust estimate method of an on-orbit Hall thruster using Hall drift current

In order to realize the thrust estimation of the Hall thruster during its flight mission,this study establishes an estimation method based on measurement of the Hall drift current.In this method,the Hall drift current is calculated from an inverse magnetostatic problem,which is formulated according to its induced magnetic flux density detected by sensors,and then the thrust is estimated by multiplying the Hall drift current with the characteristic magnetic flux density of the thruster itself.In addition,a three-wire torsion pendulum micro-thrust measurement system is utilized to verify the estimate values obtained from the proposed method.The errors were found to be less than 8%when the discharge voltage ranged from 250 V to 350 V and the anode flow rate ranged from 30 sccm to 50 sccm,indicating the possibility that the proposed thrust estimate method could be practically applied.Moreover,the measurement accuracy of the magnetic flux density is suggested to be lower than 0.015 mT and improvement on the inverse problem solution is required in the future.

基于Hall和GMR的多传感器融合方法及实现

目前霍尔传感器(Hall)和巨磁阻(GMR)传感器均广泛地应用于电力系统电流测量。为同时发挥二者的优势、降低各自的局限性,在分析Hall和GMR的温度特性、噪声特性和被测电流范围的基础上,提出了一种基于Hall和GMR的多传感器融合方案。在定义GMR和Hall的灵敏度差值ΔS基础上,将被测电流i和灵敏度差值ΔS构成的融合域划分为四个域,在域Ⅱ采用多传感加权观测融合Kalman滤波算法,将Hall和GMR的观测量和观测噪声融合后与状态方程联立进行Kalman滤波;在域Ⅰ采用数据加权融合最优权值分配的方法,给Hall的测量数据赋予较大权值,GMR的测量数据赋予较小的权值;在域Ⅲ,权值分配情况相反,各域之间可实现数据融合的平滑过渡。基于多传感器融合方法,设计了一种组合式闭环电流传感器,包括磁芯、电路部分设计及仿真。仿真和样机实验结果表明,在域Ⅱ时多传感器融合值与真实值的均方根误差低至0.004;在域Ⅰ、Ⅲ时电流测量的相对误差E_(i)均在0.255%以下。与单一传感器相比,多传感器融合的方法使组合式传感器测量电流范围增大,适用于温度变化范围较大的场景,电流测量精度及可信度更高。

Influence of the position relationship between the cathode and magnetic separatrix on the discharge process of a Hall thruster

Previous studies have shown that there is an obvious coupling relationship between the installation location of the external cathode and the magnetic separatrix in the plume region of a Hall thruster.In this paper,the particle-in-cell simulation method is used to compare the thruster discharge process under the conditions of different position relationships between the cathode and the magnetic separatrix.By comparing the distribution of electron conduction,potential,plasma density and other microscopic parameters,we try to explain the formation mechanism of the discharge difference.The simulation results show that the cathode inside and outside the magnetic separatrix has a significant effect on the distribution of potential and plasma density.When the cathode is located on the outer side of the magnetic separatrix,the potential above the plume region is relatively low,and there is a strong potential gradient above the plume region.This potential gradient is more conducive to the radial diffusion of ions above the plume,which is the main reason for the strong divergence of the plume.The distribution of ion density is also consistent with the distribution of potential.When the cathode is located on the outer side of the magnetic separatrix,the radial diffusion of ions in the plume region is enhanced.Meanwhile,by comparing the results of electron conduction,it is found that the traiectories of electrons emitted from the cathode are significantly different between the inner and outer sides of the magnetic separatrix.This is mainly because the electrons are affected by the magnetic mirror effect of the magnetic tip,which makes it difficult for the electrons to move across the magnetic separatrix.This is the main reason for the difference in potential distribution.In this paper,the simulation results of macroscopic parameters under several conditions are also compared,and they are consistent with the experimental results.The cathode is located on the inner side of the magnetic separatrix,which can effectively reduce the plume divergence angle and improve the thrust.In this paper,the cathode moves from R=50 mm to R=35 mm along the radial direction,the thrust increases by 3.6 mN and the plume divergence angle decreases by 23.77%.Combined with the comparison of the ionization region and the peak ion density,it is found that the main reason for the change in thrust is the change in the radial diffusion of ions in the plume region.

Intrinsic valley-polarized quantum anomalous Hall effect in a two-dimensional germanene/MnI_(2) van der Waals heterostructure

Valley-polarized quantum anomalous Hall effect(VQAHE), combined nontrivial band topology with valleytronics,is of importance for both fundamental sciences and emerging applications. However, the experimental realization of this property is challenging. Here, by using first-principles calculations and modal analysis, we predict a mechanism of producing VQAHE in two-dimensional ferromagnetic van der Waals germanene/MnI_(2) heterostructure. This heterostructure exhibits both valley anomalous Hall effect and VQAHE due to the joint effects of magnetic exchange effect and spin–orbital coupling with the aid of anomalous Hall conductance and chiral edge state. Moreover interestingly, through the electrical modulation of ferroelectric polarization state in In_(2)Se_(3), the germanene/Mn I_(2)/In_(2)Se_(3) heterostructure can undergo reversible switching from a semiconductor to a metallic behavior. This work offers a guiding advancement for searching for VQAHE in ferromagnetic van der Waals heterostructures and exploiting energy-efficient devices based on the VQAHE.

Enhanced anomalous Hall effect in kagome magnet YbMn_(6)Sn_(6)with intermediate-valence ytterbium

We report on the magnetization and anomalous Hall effect(AHE)in the high-quality single crystals of the kagome magnet YbMn_(6)Sn_(6),where the spins of the Mn atoms in the kagome lattice order ferromagnetically and the intermediate-valence Yb atoms are nonmagnetic.The intrinsic mechanism plays a crucial role in the AHE,leading to an enhanced anomalous Hall conductivity(AHC)compared with the other rare-earth RMn_(6)Sn_(6)compounds.Our band structure calculation reveals a strong hybridization between the 4f electrons of Yb and conduction electrons.

Anomalous Hall effect and electronic correlation in a spin-reoriented kagome antiferromagnet LuFe_(6)Sn_(6)

The kagome lattice system has been identified as a fertile ground for the emergence of a number of new quantumstates,including superconductivity,quantum spin liquids,and topological electronic states.This has attracted significantinterest within the field of condensed matter physics.Here,we present the observation of an anomalous Hall effect in aniron-based kagome antiferromagnet LuFe_(6)Sn_(6),which implies a non-zero Berry curvature in this compound.By means ofextensive magnetic measurements,a high Neel temperature,T_(N)=552 K,and a spin reorientation behavior were identifiedand a simple temperature-field phase diagram was constructed.Furthermore,this compound was found to exhibit a largeSommerfeld coefficient ofγ=87 mJ·mol^(-1)·K^(-2),suggesting the presence of a strong electronic correlation effect.Ourresearch indicates that LuFe_(6)Sn_(6)is an intriguing compound that may exhibit magnetism,strong correlation,and topologicalstates.

Anomalous valley Hall effect in two-dimensional valleytronic materials

The anomalous valley Hall effect(AVHE)can be used to explore and utilize valley degrees of freedom in materials,which has potential applications in fields such as information storage,quantum computing and optoelectronics.AVHE exists in two-dimensional(2D)materials possessing valley polarization(VP),and such 2D materials usually belong to the hexagonal honeycomb lattice.Therefore,it is necessary to achieve valleytronic materials with VP that are more readily to be synthesized and applicated experimentally.In this topical review,we introduce recent developments on realizing VP as well as AVHE through different methods,i.e.,doping transition metal atoms,building ferrovalley heterostructures and searching for ferrovalley materials.Moreover,2D ferrovalley systems under external modulation are also discussed.2D valleytronic materials with AVHE demonstrate excellent performance and potential applications,which offer the possibility of realizing novel low-energy-consuming devices,facilitating further development of device technology,realizing miniaturization and enhancing functionality of them.

Evolution of anomalous Hall effect in ferromagnetic Weyl semimetal Nb_(x)Zr_(1-x)Co_(2)Sn

Magnetic topological semimetal can host various topological non-trivial states leading to exotic novel transport properties.Here we report the systematic magneto-transport studies on the Heusler alloy Nb_(x)Zr_(1-x)Co_(2)Sn considered as a ferromagnetic(FM)Weyl semimetal.The cusp anomaly of temperature-dependent resistivity and large isotropic negative magneto-resistivity(MR)emerge around the FM transition consistent with the theoretical half-metallic predictions.The prominent anomalous Hall effect(AHE)has the same behavior with the applied field along various crystal directions.The Nb doping introduces more disorder resulting in the enhancement of the upturn for the temperature-dependent resistivity in low temperatures.With Nb doping,the AHE exhibits systemic evolution with the Fermi level lifted.At the doping level of x=0.25,the AHE mainly originates from the intrinsic contribution related to non-trivial topological Weyl states.

Tailoring-compensated ferrimagnetic state and anomalous Hall effect in quaternary Mn–Ru–V–Ga Heusler compounds

Cubic Mn_(2)Ru_(x)Ga Heusler compound is a typical example of compensated ferrimagnet with attractive potential for high-density,ultrafast,and low-power spintronic applications.In the form of epitaxial thin films,Mn_(2)Ru_(x)Ga exhibits high spin polarization and high tunability of compensation temperature by freely changing the Ru content x in a broad range(0.3<x<1.0).Herein Mn-Ru-Ga-based polycrystalline bulk buttons prepared by arc melting are systematically studied and it is found that in equilibrium bulk form,the cubic structure is unstable when x<0.75.To overcome this limitation,Mn-Ru-Ga is alloyed with a fourth element V.By adjusting the content of V in the By adjusting the content of V in the Mn_(2)Ru_(0.75)V_(y)Ga and Mn_(2.25-y)Ru_(0.75)V_(y)Ga quaternary systems the magnetic compensation temperature is tuned.Compensation is achieved near 300 K which is confirmed by both the magnetic measurement and anomalous Hall effect measurement.The analyses of the anomalous Hall effect scaling in quaternary Mn-Ru-V-Ga alloy reveal the dominant role of skew scattering,notably that contributed caused by the thermally excited phonons,in contrast to the dominant intrinsic mechanism found in many other 3d ferromagnets and Heusler compounds.It is further shown that the Ga antisites and V content can simultaneously control the residual resistivity ratio(RRR)as well as the relative contribution of phonon and defect to the anomalous Hall effect a"/a0'in Mn-Ru-V-Ga,resulting in a scaling relation a"/a0'∝RRR^(1.8).

Influence of acceleration stage electrode voltage on the performance of double-stage Hall effect thruster with adjustable zero magnetic point

The configuration of electrode voltage and zero magnetic point position has a significant impact on the performance of the double-stage Hall effect thruster. A 2D-3V model is established based on the two-magnetic peak type double-stage Hall thruster configuration, and a particle-in-cell simulation is carried out to investigate the influences of both acceleration electrode voltage value and zero magnetic point position on the thruster discharge characteristics and performances.The results indicate that increasing the acceleration voltage leads to a larger potential drop in the acceleration stage, allowing ions to gain higher energy, while electrons are easily absorbed by the intermediate electrode, resulting in a decrease in the anode current and ionization rate. When the acceleration voltage reaches 500 V, the thrust and efficiency are maximized, resulting in a 15%increase in efficiency. After the acceleration voltage exceeds 500 V, a potential barrier forms within the channel, leading to a decrease in thruster efficiency. Further study shows that as the second zero magnetic point moves towards the outlet of the channel, more electrons easily traverse the zero magnetic field region, participating in the ionization. The increase in the ionization rate leads to a gradual enhancement in both thrust and efficiency.

Growth mechanism and characteristics of electron drift instability in Hall thruster with different propellant types

The existence of a significant electron drift instability(EDI) in the Hall thruster is considered as one of the possible causes of the abnormal increase in axial electron mobility near the outlet of the channel. In recent years, extensive simulation research on the characteristics of EDI has been conducted, but the excitation mechanism and growth mechanism of EDI in linear stage and nonlinear stage remain unclear. In this work, a one-dimensional PIC model in the azimuthal direction of the thruster near-exit region is established to gain further insights into the mechanism of the EDI in detail, and the effects of different types of propellants on EDI characteristics are discussed. The changes in axial electron transport caused by EDI under different types of propellants and electromagnetic field strengths are also examined. The results indicate that EDI undergoes a short linear growth phase before transitioning to the nonlinear phase and finally reaching saturation through the ion Landau damping. The EDI drives a significant ion heating in the azimuthal direction through electron–ion friction before entering the quasi-steady state, which increases the axial mobility of the electrons. Using lighter atomic weight propellant can effectively suppress the oscillation amplitude of EDI, but it will increase the linear growth rate, frequency, and phase velocity of EDI. Compared with the classical mobility, the axial electron mobility under the EDI increases by three orders of magnitude, which is consistent with experimental phenomena. The change of propellant type is insufficient to significantly change the axial electron mobility. It is also found that the collisions between electrons and neutral gasescan significantly affect the axial electron mobility under the influence of EDI, and lead the strength of the electric field to increase and the strength of the magnetic field to decrease, thereby both effectively suppressing the axial transport of electrons.

Performance investigation of a low-power Hall thruster fed on iodine propellant

The common propellants used for electric thrusters, such as xenon and krypton, are rare, expensive,and difficult to acquire. Solid iodine attracts much attention with the advantages of low cost,extensive availability, low vapor pressure, and ionization potential. The performance of a lowpower iodine-fed Hall thruster matched with a xenon-fed cathode is investigated across a broad range of operation conditions. Regulation of the iodine vapor's mass flow rates is stably achieved by using a temperature control method of the iodine reservoir. The thrust measurements are finished utilizing a thrust target during the tests. Results show that thrust and anode-specific impulse increase approximately linearly with the increasing iodine mass flow rate.At the nominal power of 200 W class, iodine mass flow rates are 0.62 and 0.93 mg/s, thrusts are7.19 and 7.58 m N, anode specific impulses are 1184 and 826 s, anode efficiencies are 20.8%and 14.5%, and thrust to power ratios are 35.9 and 37.9 m N/k W under the conditions of 250 V,0.8 A and 200 V, 1.0 A, respectively. The operating characteristics of iodine-fed Hall thruster are analyzed in different states. Further work on the measurements of plasma characteristics and experimental optimization will be carried out.

Multi-functional photonic spin Hall effect sensor controlled by phase transition

Photonic spin Hall effect(PSHE), as a novel physical effect in light–matter interaction, provides an effective metrological method for characterizing the tiny variation in refractive index(RI). In this work, we propose a multi-functional PSHE sensor based on VO_(2), a material that can reveal the phase transition behavior. By applying thermal control, the mutual transformation into different phase states of VO_(2) can be realized, which contributes to the flexible switching between multiple RI sensing tasks. When VO_(2) is insulating, the ultrasensitive detection of glucose concentrations in human blood is achieved. When VO_(2) is in a mixed phase, the structure can be designed to distinguish between the normal cells and cancer cells through no-label and real-time monitoring. When VO_(2) is metallic, the proposed PSHE sensor can act as an RI indicator for gas analytes. Compared with other multi-functional sensing devices with the complex structures, our design consists of only one analyte and two VO_(2) layers, which is very simple and elegant. Therefore, the proposed VO_(2)-based PSHE sensor has outstanding advantages such as small size, high sensitivity, no-label, and real-time detection, providing a new approach for investigating tunable multi-functional sensors.

Spin direction dependent quantum anomalous Hall effect in two-dimensional ferromagnetic materials

We propose a scheme for realizing the spin direction-dependent quantum anomalous Hall effect(QAHE)driven by spin-orbit couplings(SOC)in two-dimensional(2D)materials.Based on the sp^(3)tight-binding(TB)model,we find that these systems can exhibit a QAHE with out-of-plane and in-plane magnetization for the weak and strong SOC,respectively,in which the mechanism of quantum transition is mainly driven by the band inversion of p_(x,y)/p_(z)orbitals.As a concrete example,based on first-principles calculations,we realize a real material of monolayer 1T-SnN_(2)/PbN_(2)exhibiting the QAHE with in-plane/out-of-plane magnetization characterized by the nonzero Chern number C and topological edge states.These findings provide useful guidance for the pursuit of a spin direction-dependent QAHE and hence stimulate immediate experimental interest.

Surface phonon resonance:A new mechanism for enhancing photonic spin Hall effect and refractive index sensor

Metal-based surface plasmon resonance(SPR)plays an important role in enhancing the photonic spin Hall effect(SHE)and developing sensitive optical sensors.However,the very large negative permittivities of metals limit their applications beyond the near-infrared regime.In this work,we theoretically present a new mechanism to enhance the photonic SHE by taking advantage of SiC-supported surface phonon resonance(SPhR)in the mid-infrared regime.The transverse displacement of photonic SHE is very sensitive to the wavelength of incident light and the thickness of SiC layer.Under the optimal parameter setup,the calculated largest transverse displacement of SiC-based SPhR structure reaches up to 163.8 ym,which is much larger than the condition of SPR.Moreover,an NO_(2) gas sensor based on the SPhR-enhanced photonic SHE is theoretically proposed with the superior sensing performance.Both the intensity and angle sensitivity of this sensor can be effectively manipulated by varying the damping rate of SiC.The results may provide a promising paradigm to enhance the photonic SHE in the mid-infrared region and open up new opportunity of highly sensitive refractive index sensors.

Discovery of controllable high Chern number quantum anomalous Hall state in tetragonal lattice FeSIn

Quantum anomalous Hall(QAH) insulators have excellent properties driven by fancy topological physics, but their practical application is greatly hindered by the observed temperature of liquid nitrogen, and the QAH insulator with high Chern number is conducive to spintronic devices with lower energy consumption. Here, we find that monolayer Fe SIn is a good candidate for realizing the QAH phase;it exhibits a high magnetic transition temperature of 221 K and tunable C = ±2 with respect to magnetization orientation in the y–z plane. After the application of biaxial strain, the magnetic axis shifts from the x–y plane to the z direction, and the effect of the high C and ferromagnetic ground state on the stress is robust. Also, the effect of correlation U on C has been examined. These properties are rooted in the large size of the Fe atom that contributes to ferromagnetic kinetic exchange with neighboring Fe atoms. These findings demonstrate monolayer Fe SIn to be a major template for probing novel QAH devices at higher temperatures.

Quasi-plastic deformation mechanisms and inverse Hall-Petch relationship in nanocrystalline boron carbide under compression

Grain boundaries(GBs)play a significant role in the deformation behaviors of nanocrystalline ceramics.Here,we investigate the compression behaviors of nanocrystalline boron carbide(nB_(4)C)with varying grain sizes using molecular dynamics simulations with a machine-learning force field.The results reveal quasi-plastic deformation mechanisms in nB_(4)C:GB sliding,intergranular amorphization and intragranular amorphization.GB sliding arises from the presence of soft GBs,leading to intergranular amorphization.Intragranular amorphization arises from the interaction between grains with unfavorable orientations and the softened amorphous GBs,and finally causes structural failure.Furthermore,nB_(4)C models with varying grain sizes from 4.07 nm to 10.86 nm display an inverse Hall-Petch relationship due to the GB sliding mechanism.A higher strain rate in nB_(4)C often leads to a higher yield strength,following a 2/3 power relationship.These deformation mechanisms are critical for the design of ceramics with superior mechanical properties.