Accurate and quantitative investigation of the physical structure and fractal geometry of coal has important theoretical and practical signifcance for coal bed methane(CBM)development and the prevention of dynamic dis...Accurate and quantitative investigation of the physical structure and fractal geometry of coal has important theoretical and practical signifcance for coal bed methane(CBM)development and the prevention of dynamic disasters such as coal and gas outbursts.This study investigates the pore structure and fractal characteristics of soft and hard coals using nitrogen and carbon dioxide(N_(2)/CO_(2))adsorption.Coal samples from Pingdingshan Mine in Henan province of China were collected and pulverized to the required size(0.20–0.25 mm).N_(2)/CO_(2)adsorption tests were performed to evaluate the specifc surface area(SSA),pore size distribution(PSD),and pore volume(PV)using Braunuer-Emmett-Teller(BET),Barrett-Joyner-Halenda(BJH),and Density Functional Theory(DFT).The pore structure was characterized based on the theory of fractal dimensions.The results unveiled that the strength of coal has a signifcant infuence on pore structure and fractal dimensions.There are signifcant diferences in SSA and PV between both coals.The BJH-PV and BET-SSA obtained by N_(2)-adsorption for soft coal are 0.029–0.032 cm^(3)/g and 3.523–4.783 m^(2)/g.While the values of PV and SSA obtained by CO_(2)-adsorption are 0.037–0.039 cm^(3)/g and 106.016–111.870 m^(2)/g.Soft coal shows greater SSA and PV than hard coal,which is consistent with the adsorption capacity(VL).The fractal dimensions of soft and hard coal are respectively diferent.The Ding coal exhibits larger D1 and smaller D_(2),and the reverse for the Wu coal seam is observed.The greater the value of D1(complexity of pore surface)of soft coal is,the larger the pore surface roughness and gas adsorption capacity is.The results enable us to conclude that the characterization of pores and fractal dimensions of soft and hard coals is diferent,tending to diferent adsorption/desorption characteristics.In this regard,the results provide a reference for formulating corresponding coal and gas outburst prevention and control measures.展开更多
This paper aims to improve the accuracy and applicability of gas diffusion mathematical models from coal particles. Firstly, a new constitutive model for gas diffusion from coal particles with tri-disperse pore struct...This paper aims to improve the accuracy and applicability of gas diffusion mathematical models from coal particles. Firstly, a new constitutive model for gas diffusion from coal particles with tri-disperse pore structure is constructed by considering the difference in characteristics between soft coal and hard coal.The analytical solution is then derived, that is, the quantitative relationship between gas diffusion rate(Qt/Q_∞) and diffusion time(t), The pore structure parameters of soft coal and hard coal from Juji coal mine are determined. Gas diffusion rules are numerically calculated and investigated by physical simulation methods. Lastly, the applicability of this model is verified. The results show that the homogeneous model only applies to the gas diffusion process of hard coal during the initial 10 min. The calculation results from this model and the physical experimental results of soft coal and hard coal are nearly identical during the initial 30 min.展开更多
At present, numerical modelling of distributions of many rock mass characteristics plays more and more important role in many geomechanical questions. In the issues related to seismic and rockburst hazards, the analys...At present, numerical modelling of distributions of many rock mass characteristics plays more and more important role in many geomechanical questions. In the issues related to seismic and rockburst hazards, the analyses of distributions of stress component values in the rock strata are performed, similarly as those of deformation parameters of the strata. To do this, commercial computer programs are used which function on the basis of the finite element-, separate element-, finite difference-, boundary element methods, or individually designed computer programs. They enable to obtain information, unattainable with other methods, being of importance for further concluding on those hazards. The programs based on applying those methods have contributed to important progress and development of science in the domain of analyzing and predicting the hazards. To this end, the commercial computer programs are used that are based on the methods of: finite elements, separate elements, finite differences, boundary elements, etc., or on individually developed computer programs. They enable to obtain information, unavailable using other methods, being of vital importance for further concluding on these hazards. The programs based on these methods have contributed to essential progress and development of science in the field of analysing and predicting the hazards. Apart from their obvious advantages, they have many drawbacks that hinder their practical, routine application. To allow making these type of analyses, without the necessity of constructing complicated models and knowing the detailed geomechanical parameters of rocks, together with laborious computation using a high-rank computer hardware, an analytical-empirical method has been developed at Central Mining Institute, Poland, to make prediction (modelling) of the distribution of pressure values (vertical component of stress) in SIGMAZ coal seams. It is based on geophysical measurements, generalized for the conditions of the Upper Silesia Coal Basin, of disturbing effect of the mining edge and tectonic faults on the state of stress. The paper presents methodological and programming assumptions of the method. The scope of its application has been discussed, and results of demonstration analyses for Polish hard coal mines presented. There have been also given the advantages of the method in relation to classical numerical methods.展开更多
In order to solve the problems of top-coal inadequate destruction and large amounts of gas emission in mining extra thick and hard coal seam,this study investigated the pre-splitting for deep borehole blasting and gas...In order to solve the problems of top-coal inadequate destruction and large amounts of gas emission in mining extra thick and hard coal seam,this study investigated the pre-splitting for deep borehole blasting and gas pre-draining technologies on top coal.The mechanism of the technologies was systematically expounded based on hard top-coal cracks development obtained by numerical simulation and theoretical analysis.The results show that explosive blasting in the hard rock results in a large number of cracks and large displacement in the rock mass due to the effect of explosion stress.Meanwhile,the thick top-coal caves,and desorbing gas flows along the cracks improve gas extraction.Finally,the pre-splitting for deep borehole blasting and gas pre-draining technologies was applied in No.3802 working face of Shui Liandong Coal Mine,which increases monthly output in the face to 67.34 kt and the drained gas concentration to 86.2%.The drained gas average concentration from each borehole reaches 40%,and the effect is remarkable.展开更多
Concerning the issue of mine pressure behaviors occurred in fully mechanized caving mining of thick coal seams beneath hard stratum in Datong Mining Area, combined with thin and thick plate theory, the paper utilizes ...Concerning the issue of mine pressure behaviors occurred in fully mechanized caving mining of thick coal seams beneath hard stratum in Datong Mining Area, combined with thin and thick plate theory, the paper utilizes theoretical analysis, similar experiments, numerical simulations and field tests to study the influence of remaining coal pillars in Jurassic system goaf on hard stratum fractures, as well as mine pressure behaviors under their coupling effects. The paper concludes the solution formula of initial fault displacement in hard stratum caused by remaining coal pillars. Experiments prove that coupling effects can enhance mine pressure behaviors on working faces. When inter-layer inferior key strata fractures, mine pressure phenomenon such as significant roof weighting steps and increasing resistance in support.When inter-layer superior key strata fractures, the scope of overlying strata extends to Jurassic system goaf, dual-system stopes cut through, and remaining coal pillars lose stability. As a result, the bottom inferior key strata also lose stability. It causes huge impacts on working face, and the second mine pressure behaviors. These phenomena provide evidence for research on other similar mine strata pressure behaviors occurred in dual-system mines with remaining coal pillars.展开更多
The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the s...The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the systemic design and working face out-play, tried to perfect the caving mining technology of hard-thick coal seams further.展开更多
The risk of rockbursts is one of the main threats in hard coal mines. Compared to other underground mines, the number of factors contributing to the rockburst at underground coal mines is much greater.Factors such as ...The risk of rockbursts is one of the main threats in hard coal mines. Compared to other underground mines, the number of factors contributing to the rockburst at underground coal mines is much greater.Factors such as the coal seam tendency to rockbursts, the thickness of the coal seam, and the stress level in the seam have to be considered, but also the entire coal seam-surrounding rock system has to be evaluated when trying to predict the rockbursts. However, in hard coal mines, there are stroke or stress-stroke rockbursts in which the fracture of a thick layer of sandstone plays an essential role in predicting rockbursts. The occurrence of rockbursts in coal mines is complex, and their prediction is even more difficult than in other mines. In recent years, the interest in machine learning algorithms for solving complex nonlinear problems has increased, which also applies to geosciences. This study attempts to use machine learning algorithms, i.e. neural network, decision tree, random forest, gradient boosting, and extreme gradient boosting(XGB), to assess the rockburst hazard of an active hard coal mine in the Upper Silesian Coal Basin. The rock mass bursting tendency index WTGthat describes the tendency of the seam-surrounding rock system to rockbursts and the anomaly of the vertical stress component were applied for this purpose. Especially, the decision tree and neural network models were proved to be effective in correctly distinguishing rockbursts from tremors, after which the excavation was not damaged. On average, these models correctly classified about 80% of the rockbursts in the testing datasets.展开更多
硬炭因资源丰富、结构稳定及安全性高等优势,已成为钠离子电池常用阳极材料。其中,煤基衍生硬炭受到了广泛的关注。本工作以长焰煤为碳源,硫脲为氮硫源,NaCl为模板,通过两步炭化工艺和杂原子掺杂相结合的方法合成了N和S共掺杂的煤基硬炭...硬炭因资源丰富、结构稳定及安全性高等优势,已成为钠离子电池常用阳极材料。其中,煤基衍生硬炭受到了广泛的关注。本工作以长焰煤为碳源,硫脲为氮硫源,NaCl为模板,通过两步炭化工艺和杂原子掺杂相结合的方法合成了N和S共掺杂的煤基硬炭(NSPC1200)。两步炭化过程在调节碳微晶结构和扩大层间距方面发挥了重要的作用。N和S的共掺杂调节了炭材料的电子结构,赋予其更多的活性位点;此外,引入NaCl作为模板有助于孔结构的构建,有利于电极和电解质之间的接触,从而实现Na+和电子的有效传输。在协同作用下,样品NSPC1200表现出优异的储钠能力,在20 mA g^(−1)电流密度下呈现314.2 mAh g^(−1)的可逆容量。即使在100 mA g^(−1)下循环200次,仍保持224.4 mAh g^(−1)的比容量。这项工作成功实现了策略性调整煤基炭材料微观结构的目标,最终获得了具有优异的电化学性能的硬炭阳极。展开更多
基金supported by the National Natural Science Foundation of China(No.51874294,No.51974300,and No.52034008)the Fundamental Research Funds for the Central Universities(No.2017XKZD01 and No.2020ZDPY0224)the Six Talent Peaks Project in Jiangsu Province(GDZB-027).
文摘Accurate and quantitative investigation of the physical structure and fractal geometry of coal has important theoretical and practical signifcance for coal bed methane(CBM)development and the prevention of dynamic disasters such as coal and gas outbursts.This study investigates the pore structure and fractal characteristics of soft and hard coals using nitrogen and carbon dioxide(N_(2)/CO_(2))adsorption.Coal samples from Pingdingshan Mine in Henan province of China were collected and pulverized to the required size(0.20–0.25 mm).N_(2)/CO_(2)adsorption tests were performed to evaluate the specifc surface area(SSA),pore size distribution(PSD),and pore volume(PV)using Braunuer-Emmett-Teller(BET),Barrett-Joyner-Halenda(BJH),and Density Functional Theory(DFT).The pore structure was characterized based on the theory of fractal dimensions.The results unveiled that the strength of coal has a signifcant infuence on pore structure and fractal dimensions.There are signifcant diferences in SSA and PV between both coals.The BJH-PV and BET-SSA obtained by N_(2)-adsorption for soft coal are 0.029–0.032 cm^(3)/g and 3.523–4.783 m^(2)/g.While the values of PV and SSA obtained by CO_(2)-adsorption are 0.037–0.039 cm^(3)/g and 106.016–111.870 m^(2)/g.Soft coal shows greater SSA and PV than hard coal,which is consistent with the adsorption capacity(VL).The fractal dimensions of soft and hard coal are respectively diferent.The Ding coal exhibits larger D1 and smaller D_(2),and the reverse for the Wu coal seam is observed.The greater the value of D1(complexity of pore surface)of soft coal is,the larger the pore surface roughness and gas adsorption capacity is.The results enable us to conclude that the characterization of pores and fractal dimensions of soft and hard coals is diferent,tending to diferent adsorption/desorption characteristics.In this regard,the results provide a reference for formulating corresponding coal and gas outburst prevention and control measures.
基金the National Natural Science Foundation of China(Nos.51374095 and 51404099)the Program for Innovative Research Team in University of Ministry of Education of China(IRT_16R22)+1 种基金the Henan Provincial Key Scientific and Technological Project(No.092102310314)China Scholarship Council
文摘This paper aims to improve the accuracy and applicability of gas diffusion mathematical models from coal particles. Firstly, a new constitutive model for gas diffusion from coal particles with tri-disperse pore structure is constructed by considering the difference in characteristics between soft coal and hard coal.The analytical solution is then derived, that is, the quantitative relationship between gas diffusion rate(Qt/Q_∞) and diffusion time(t), The pore structure parameters of soft coal and hard coal from Juji coal mine are determined. Gas diffusion rules are numerically calculated and investigated by physical simulation methods. Lastly, the applicability of this model is verified. The results show that the homogeneous model only applies to the gas diffusion process of hard coal during the initial 10 min. The calculation results from this model and the physical experimental results of soft coal and hard coal are nearly identical during the initial 30 min.
基金Project R0903003 supported by the Research-Development Project of Poland
文摘At present, numerical modelling of distributions of many rock mass characteristics plays more and more important role in many geomechanical questions. In the issues related to seismic and rockburst hazards, the analyses of distributions of stress component values in the rock strata are performed, similarly as those of deformation parameters of the strata. To do this, commercial computer programs are used which function on the basis of the finite element-, separate element-, finite difference-, boundary element methods, or individually designed computer programs. They enable to obtain information, unattainable with other methods, being of importance for further concluding on those hazards. The programs based on applying those methods have contributed to important progress and development of science in the domain of analyzing and predicting the hazards. To this end, the commercial computer programs are used that are based on the methods of: finite elements, separate elements, finite differences, boundary elements, etc., or on individually developed computer programs. They enable to obtain information, unavailable using other methods, being of vital importance for further concluding on these hazards. The programs based on these methods have contributed to essential progress and development of science in the field of analysing and predicting the hazards. Apart from their obvious advantages, they have many drawbacks that hinder their practical, routine application. To allow making these type of analyses, without the necessity of constructing complicated models and knowing the detailed geomechanical parameters of rocks, together with laborious computation using a high-rank computer hardware, an analytical-empirical method has been developed at Central Mining Institute, Poland, to make prediction (modelling) of the distribution of pressure values (vertical component of stress) in SIGMAZ coal seams. It is based on geophysical measurements, generalized for the conditions of the Upper Silesia Coal Basin, of disturbing effect of the mining edge and tectonic faults on the state of stress. The paper presents methodological and programming assumptions of the method. The scope of its application has been discussed, and results of demonstration analyses for Polish hard coal mines presented. There have been also given the advantages of the method in relation to classical numerical methods.
基金financially supported by the National Natural Science Fund of China(Nos.51004003 and 51474009)Anhui Province Education Department Natural Science Fund Key Project of China(No.KJ2010A091)
文摘In order to solve the problems of top-coal inadequate destruction and large amounts of gas emission in mining extra thick and hard coal seam,this study investigated the pre-splitting for deep borehole blasting and gas pre-draining technologies on top coal.The mechanism of the technologies was systematically expounded based on hard top-coal cracks development obtained by numerical simulation and theoretical analysis.The results show that explosive blasting in the hard rock results in a large number of cracks and large displacement in the rock mass due to the effect of explosion stress.Meanwhile,the thick top-coal caves,and desorbing gas flows along the cracks improve gas extraction.Finally,the pre-splitting for deep borehole blasting and gas pre-draining technologies was applied in No.3802 working face of Shui Liandong Coal Mine,which increases monthly output in the face to 67.34 kt and the drained gas concentration to 86.2%.The drained gas average concentration from each borehole reaches 40%,and the effect is remarkable.
基金provided by the National Natural Science Foundation of China(No.51104191)the National Natural Science Foundation of China(No.51374258)the Program for Changjiang Scholars and Innovative Research Team in University of China(No.IRT13043)
文摘Concerning the issue of mine pressure behaviors occurred in fully mechanized caving mining of thick coal seams beneath hard stratum in Datong Mining Area, combined with thin and thick plate theory, the paper utilizes theoretical analysis, similar experiments, numerical simulations and field tests to study the influence of remaining coal pillars in Jurassic system goaf on hard stratum fractures, as well as mine pressure behaviors under their coupling effects. The paper concludes the solution formula of initial fault displacement in hard stratum caused by remaining coal pillars. Experiments prove that coupling effects can enhance mine pressure behaviors on working faces. When inter-layer inferior key strata fractures, mine pressure phenomenon such as significant roof weighting steps and increasing resistance in support.When inter-layer superior key strata fractures, the scope of overlying strata extends to Jurassic system goaf, dual-system stopes cut through, and remaining coal pillars lose stability. As a result, the bottom inferior key strata also lose stability. It causes huge impacts on working face, and the second mine pressure behaviors. These phenomena provide evidence for research on other similar mine strata pressure behaviors occurred in dual-system mines with remaining coal pillars.
基金Supported by the Production Safety and Supervision of Management Bureau of China(04-116) the Returned Overseas Scholar Fund of Educational Department of China(2003406)+1 种基金 the Soft Science Planning Program of Shandong Province(A200423-6) the National Soft Science Planed Program (2004DGQ3D090)
文摘The article introduced the key technology, mining process, and back-and-forth mining method for the caving working face of hard-thick coal seams in Datong mine, and researched this innovations process, optimized the systemic design and working face out-play, tried to perfect the caving mining technology of hard-thick coal seams further.
基金supported by the Ministry of Science and Higher Education, Republic of Poland (Statutory Activity of the Central Mining Institute, Grant No. 11133010)
文摘The risk of rockbursts is one of the main threats in hard coal mines. Compared to other underground mines, the number of factors contributing to the rockburst at underground coal mines is much greater.Factors such as the coal seam tendency to rockbursts, the thickness of the coal seam, and the stress level in the seam have to be considered, but also the entire coal seam-surrounding rock system has to be evaluated when trying to predict the rockbursts. However, in hard coal mines, there are stroke or stress-stroke rockbursts in which the fracture of a thick layer of sandstone plays an essential role in predicting rockbursts. The occurrence of rockbursts in coal mines is complex, and their prediction is even more difficult than in other mines. In recent years, the interest in machine learning algorithms for solving complex nonlinear problems has increased, which also applies to geosciences. This study attempts to use machine learning algorithms, i.e. neural network, decision tree, random forest, gradient boosting, and extreme gradient boosting(XGB), to assess the rockburst hazard of an active hard coal mine in the Upper Silesian Coal Basin. The rock mass bursting tendency index WTGthat describes the tendency of the seam-surrounding rock system to rockbursts and the anomaly of the vertical stress component were applied for this purpose. Especially, the decision tree and neural network models were proved to be effective in correctly distinguishing rockbursts from tremors, after which the excavation was not damaged. On average, these models correctly classified about 80% of the rockbursts in the testing datasets.
文摘硬炭因资源丰富、结构稳定及安全性高等优势,已成为钠离子电池常用阳极材料。其中,煤基衍生硬炭受到了广泛的关注。本工作以长焰煤为碳源,硫脲为氮硫源,NaCl为模板,通过两步炭化工艺和杂原子掺杂相结合的方法合成了N和S共掺杂的煤基硬炭(NSPC1200)。两步炭化过程在调节碳微晶结构和扩大层间距方面发挥了重要的作用。N和S的共掺杂调节了炭材料的电子结构,赋予其更多的活性位点;此外,引入NaCl作为模板有助于孔结构的构建,有利于电极和电解质之间的接触,从而实现Na+和电子的有效传输。在协同作用下,样品NSPC1200表现出优异的储钠能力,在20 mA g^(−1)电流密度下呈现314.2 mAh g^(−1)的可逆容量。即使在100 mA g^(−1)下循环200次,仍保持224.4 mAh g^(−1)的比容量。这项工作成功实现了策略性调整煤基炭材料微观结构的目标,最终获得了具有优异的电化学性能的硬炭阳极。