This paper describes the robust optimum design which combines the geometrical optimization method proposed by Hashimoto and statistical method. Recently, 2.5″ hard disk drives (HDDs) are widely used for mobile device...This paper describes the robust optimum design which combines the geometrical optimization method proposed by Hashimoto and statistical method. Recently, 2.5″ hard disk drives (HDDs) are widely used for mobile devices such as laptops, video cameras and car navigation systems. In mobile applications, high durability towards external vibrations and shocks are essentials to the bearings of HDD spindle motor. In addition, the bearing characteristics are influenced by manufacturing error because of small size of the bearings of HDD. In this paper, the geometrical optimization is carried out to maximize the bearing stiffness using sequential quadratic programming to improve vibration characteristics. Additionally, the bearing stiffness is analyzed considering dimensional tolerance of the bearing using statistical method. The dimensional tolerance is assumed to distribute according to the Gaussian distribution, and then the bearing stiffness is estimated by combining the expectation and standard deviation. As a result, in the robust optimum design, new groove geometry of bearing can be obtained in which the bearing stiffness is four times higher than the stiffness of conventional spiral groove bearing. Moreover, the bearing has lower variability compared with the result of optimum design neglecting dimensional tolerance.展开更多
This paper describes the experimental study on shock response of FDB (fluid dynamic bearing) spindle for HDDs (hard disk drives). The FDBs are widely used as rotating shaft support elements for HDD spindle motors....This paper describes the experimental study on shock response of FDB (fluid dynamic bearing) spindle for HDDs (hard disk drives). The FDBs are widely used as rotating shaft support elements for HDD spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipment such as mobile PCs (personal computers), video cameras, car navigation systems and so on. Hence, the rotating shaft has a possibility to come in contact with the bearing by external shocks and it causes wear or seizure to the bearing surface. To avoid the problem, it is extremely important to know how the spindle moves against the large shock on HDDs experimentally. However, as far as the authors know, there are few experimental studies treating the shock response of HDD spindles. In this paper, firstly, we propose a new test rig and experimental method for shock response of FDB spindles. Then the shock tests against the radial and axial disturbance on FDB spindle for 2.5" HDD are conducted. Finally, the experimental results of shock response waveforms and maximum displacement of disk are shown.展开更多
Fluid film bearings are widely used as support elements of rotating shaft for HDD (hard disk drive) spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increas...Fluid film bearings are widely used as support elements of rotating shaft for HDD (hard disk drive) spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipments such as mobile PCs, car navigation systems. Hence, the rotating shaft has a possibility to come in contact with the bearing and it causes wear or seizure to the bearing surface. In order to avoid the problems, it is extremely important to enhance the dynamic characteristics of the fluid film bearings for spindles. However, verification from both theory and experiment of dynamic characteristics such as spring coefficients and damping coefficients is rare and few. In this paper, the bearing vibration characteristics when the HDD spindle is oscillated are investigated theoretically and experimentally. And then the identification method ofoil film coefficients of fluid film bearing spindles is described.展开更多
Most hard disk spindles currently used are supported by grease lubricated deep-groove ball bearings.However, in the trend of increasing spindle speed and reducing size and cost, the shortcomings of ball bearing spin-d...Most hard disk spindles currently used are supported by grease lubricated deep-groove ball bearings.However, in the trend of increasing spindle speed and reducing size and cost, the shortcomings of ball bearing spin-dles, such as high non-repeatable run out, high acoustic noise and short life time at high running speed, make themunsuitable for high performance hard disk drives (HDD). On the contrary, the dynamic characteristics of hydrody-namic bearing spindles are superior to that of ball bearing spindles. Therefore, they are considered to be the substi-tute of ball bearing spindles in HDD. In this paper, a simulative setup of HDD is build up. The dynamic characteristicsof liquid lubricated spiral groove bearing(SGB) spindles are studied. The effects of both operating condition andbearing clearance are investigated. It is found that running speed of the spindle has significant influence on its dy-namic performance, while the load has little influence. The effect of clearance is also evident.展开更多
文摘This paper describes the robust optimum design which combines the geometrical optimization method proposed by Hashimoto and statistical method. Recently, 2.5″ hard disk drives (HDDs) are widely used for mobile devices such as laptops, video cameras and car navigation systems. In mobile applications, high durability towards external vibrations and shocks are essentials to the bearings of HDD spindle motor. In addition, the bearing characteristics are influenced by manufacturing error because of small size of the bearings of HDD. In this paper, the geometrical optimization is carried out to maximize the bearing stiffness using sequential quadratic programming to improve vibration characteristics. Additionally, the bearing stiffness is analyzed considering dimensional tolerance of the bearing using statistical method. The dimensional tolerance is assumed to distribute according to the Gaussian distribution, and then the bearing stiffness is estimated by combining the expectation and standard deviation. As a result, in the robust optimum design, new groove geometry of bearing can be obtained in which the bearing stiffness is four times higher than the stiffness of conventional spiral groove bearing. Moreover, the bearing has lower variability compared with the result of optimum design neglecting dimensional tolerance.
文摘This paper describes the experimental study on shock response of FDB (fluid dynamic bearing) spindle for HDDs (hard disk drives). The FDBs are widely used as rotating shaft support elements for HDD spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipment such as mobile PCs (personal computers), video cameras, car navigation systems and so on. Hence, the rotating shaft has a possibility to come in contact with the bearing by external shocks and it causes wear or seizure to the bearing surface. To avoid the problem, it is extremely important to know how the spindle moves against the large shock on HDDs experimentally. However, as far as the authors know, there are few experimental studies treating the shock response of HDD spindles. In this paper, firstly, we propose a new test rig and experimental method for shock response of FDB spindles. Then the shock tests against the radial and axial disturbance on FDB spindle for 2.5" HDD are conducted. Finally, the experimental results of shock response waveforms and maximum displacement of disk are shown.
文摘Fluid film bearings are widely used as support elements of rotating shaft for HDD (hard disk drive) spindle motors. Recently, the opportunity for the HDD spindle motors exposed to external vibration has been increasing because the HDDs are used for various information related equipments such as mobile PCs, car navigation systems. Hence, the rotating shaft has a possibility to come in contact with the bearing and it causes wear or seizure to the bearing surface. In order to avoid the problems, it is extremely important to enhance the dynamic characteristics of the fluid film bearings for spindles. However, verification from both theory and experiment of dynamic characteristics such as spring coefficients and damping coefficients is rare and few. In this paper, the bearing vibration characteristics when the HDD spindle is oscillated are investigated theoretically and experimentally. And then the identification method ofoil film coefficients of fluid film bearing spindles is described.
文摘Most hard disk spindles currently used are supported by grease lubricated deep-groove ball bearings.However, in the trend of increasing spindle speed and reducing size and cost, the shortcomings of ball bearing spin-dles, such as high non-repeatable run out, high acoustic noise and short life time at high running speed, make themunsuitable for high performance hard disk drives (HDD). On the contrary, the dynamic characteristics of hydrody-namic bearing spindles are superior to that of ball bearing spindles. Therefore, they are considered to be the substi-tute of ball bearing spindles in HDD. In this paper, a simulative setup of HDD is build up. The dynamic characteristicsof liquid lubricated spiral groove bearing(SGB) spindles are studied. The effects of both operating condition andbearing clearance are investigated. It is found that running speed of the spindle has significant influence on its dy-namic performance, while the load has little influence. The effect of clearance is also evident.