Low-power emerging memristive designs towards secure hardware systems for applications in internet of things

Emerging memristive devices offer enormous advantages for applications such as non-volatile memories and inmemory computing(IMC),but there is a rising interest in using memristive technologies for security applications in the era of internet of things(IoT).In this review article,for achieving secure hardware systems in IoT,lowpower design techniques based on emerging memristive technology for hardware security primitives/systems are presented.By reviewing the state-of-the-art in three highlighted memristive application areas,i.e.memristive non-volatile memory,memristive reconfigurable logic computing and memristive artificial intelligent computing,their application-level impacts on the novel implementations of secret key generation,crypto functions and machine learning attacks are explored,respectively.For the low-power security applications in IoT,it is essential to understand how to best realize cryptographic circuitry using memristive circuitries,and to assess the implications of memristive crypto implementations on security and to develop novel computing paradigms that will enhance their security.This review article aims to help researchers to explore security solutions,to analyze new possible threats and to develop corresponding protections for the secure hardware systems based on low-cost memristive circuit designs.

Campus Information Network Hardware System Design

The emphasis of constructing and developing the campus information network is how to design and optimize the network hardware system. This paper mainly studies the network system structure design, the server system structure design and the network export design, and discusses the network hardware system design and optimization for different scale universities according to different practical demand. The objective is that the network hardware system can meet the demand and have been made full use.

Spectral Efficiency of Superimposed Pilots in Cell-Free Massive MIMO Systems with Hardware Impairments

In this paper,the spectral efficiency(SE)of an uplink hardware-constrained cell-free massive multi-input multi-output(MIMO)system with maximal ratio combining(MRC)receiver filters in the context of superimposed pilots(SPs)is investigated.Tractable closed-form SE expressions for the considered system are derived,which share us with opportunities to explore the impacts of the hardware quality coefficient,the length of coherence interval,and the power balance factor between pilot and data signals.Numerical results indicate that the achievable SE deteriorates as the hardware quality decreases and is more susceptible to the hardware impairments at the user equipments(UEs).Besides,we observe that SPs outperform regular pilots(RPs)in terms of SE and this performance gain is heavily dependent on the values of power balance factor and coherence interval.However,the superiorities of SPs over RPs have vanished when severe hardware imperfections are considered.

System Outage Probability and Diversity Analysis of a SWIPT Based Two-Way DF Relay Network Under Transceiver Hardware Impairments

This paper investigates the system outage performance of a simultaneous wireless information and power transfer(SWIPT)based two-way decodeand-forward(DF)relay network,where potential hardware impairments(HIs)in all transceivers are considered.After harvesting energy and decoding messages simultaneously via a power splitting scheme,the energy-limited relay node forwards the decoded information to both terminals.Each terminal combines the signals from the direct and relaying links via selection combining.We derive the system outage probability under independent but non-identically distributed Nakagami-m fading channels.It reveals an overall system ceiling(OSC)effect,i.e.,the system falls in outage if the target rate exceeds an OSC threshold that is determined by the levels of HIs.Furthermore,we derive the diversity gain of the considered network.The result reveals that when the transmission rate is below the OSC threshold,the achieved diversity gain equals the sum of the shape parameter of the direct link and the smaller shape parameter of the terminalto-relay links;otherwise,the diversity gain is zero.This is different from the amplify-and-forward(AF)strategy,under which the relaying links have no contribution to the diversity gain.Simulation results validate the analytical results and reveal that compared with the AF strategy,the SWIPT based two-way relaying links under the DF strategy are more robust to HIs and achieve a lower system outage probability.

Implementation of Embedded Ethernet Based on Hardware Protocol Stack in Substation Automation System

Embedded Ethernet technology has been utilized increasingly widely as the communication mode in the substation automation system(SAS).This paper introduces the current applying situation about embedded Ethernet in SAS First.After analyzing the protocol levels used in SAS based on embedded Ethernet and the differences between the TCP and UDP,UDP/IP is selected as the communication protocol between the station-level and bay-level devices for its real-time characteristic.Then a new kind of implementation of the embedded Ethernet is presented based on hardware protocol stack.The designed scheme can be implemented easily,reduce cost significantly and shorten developing cycle.

System Verification of Hardware Optimization Based on Edge Detection

Nowadays, digital camera based remote controllers are widely used in people’s daily lives. It is known that the edge detection process plays an essential role in remote controlled applications. In this paper, a system verification platform of hardware optimization based on the edge detection is proposed. The Field-Programmable Gate Array (FPGA) validation is an important step in the Integrated Circuit (IC) design workflow. The Sobel edge detection algorithm is chosen and optimized through the FPGA verification platform. Hardware optimization techniques are used to create a high performance, low cost design. The Sobel edge detection operator is designed and mounted through the system Advanced High-performance Bus (AHB). Different FPGA boards are used for evaluation purposes. It is proved that with the proposed hardware optimization method, the hardware design of the Sobel edge detection operator can save 6% of on-chip resources for the Sobel core calculation and 42% for the whole frame calculation.

Hardware Implementation of STM32 Microcontroller-Based Indoor Environment Monitoring System

Microcontroller is widely used in the intelligent life of modern society. Intelligent development based on Microcontroller to solve the actual needs of people’s life, work, study and other fields is the core of Microcontroller application. Therefore, it is a task for researchers to understand the structure and performance of microcontroller, develop software, and be familiar with the method and process of intelligent development based on microcontroller. And with that in mind, this paper designs and produces a physical hardware system for indoor environment detection based on STM32 microcontroller. The system can detect the light intensity, temperature and humidity, and CO gas concentration in the indoor environment;and the data is integrated and processed by the STM32 microcontroller to display the current parameter values of each quantity in the indoor environment on a 3.5-inch resistive screen;at the same time, the PC can also log in to the OneNET cloud platform through the web page, and display the light intensity, temperature and humidity, and CO gas concentration values in the indoor environment in real time in the device created by OneNET for real-time viewing. The system can also display the light intensity, temperature and humidity, and CO gas concentration values in the indoor environment in real time. The hardware system has been tested and tested to achieve its function.

基于VIP与SystemVerilog的硬件加速器仿真模型设计

随着片上系统(System on Chip,SoC)芯片规模与功能复杂度的膨胀,硬件加速器已成为大规模SoC的重要组成部分。为了缩短产品交付时间,有必要开发硬件加速器仿真模型,以在SoC设计初期支撑架构的探索与评估。在对硬件加速器的特点与建模需求进行分析的基础上,提出一种基于AXI验证IP(Verification IP,VIP)、SystemVerilog信箱和旗语的硬件加速器建模方法。该方法支持完备的总线协议特性,同时支持多个处理引擎的并行处理与乱序输出。以实际SoC项目中的通信基带加速器为例,对提出的建模方法进行介绍,并进行相应的系统级仿真与分析。所提出的建模方法可实现对硬件加速器总线行为的高效建模,能够有力支撑SoC验证以及系统架构评估,缩短项目的开发周期。

Fault Detection and Isolation for Low Hardware Redundancy Flight Control System

The problems of current highly redundant flight control system are analyzed in this paper. Our study gives methods of utilizing other information to reduce physical components on the condition of meeting the reliability requirements for flight control system. The strategies presented in this paper mainly include information redundancy, multi-thread, time redundancy, geometry space redundancy, etc.. Analysis and simulation show these non-hardware based methods can reduce the requirement of system hardware level and thus reduce the system complexity, weight, space, costs and R＆D （research and development） time.

Cascaded ELM-Based Joint Frame Synchronization and Channel Estimation over Rician Fading Channel with Hardware Imperfections

Due to the interdependency of frame synchronization(FS)and channel estimation(CE),joint FS and CE(JFSCE)schemes are proposed to enhance their functionalities and therefore boost the overall performance of wireless communication systems.Although traditional JFSCE schemes alleviate the influence between FS and CE,they show deficiencies in dealing with hardware imperfection(HI)and deterministic line-of-sight(LOS)path.To tackle this challenge,we proposed a cascaded ELM-based JFSCE to alleviate the influence of HI in the scenario of the Rician fading channel.Specifically,the conventional JFSCE method is first employed to extract the initial features,and thus forms the non-Neural Network(NN)solutions for FS and CE,respectively.Then,the ELMbased networks,named FS-NET and CE-NET,are cascaded to capture the NN solutions of FS and CE.Simulation and analysis results show that,compared with the conventional JFSCE methods,the proposed cascaded ELM-based JFSCE significantly reduces the error probability of FS and the normalized mean square error(NMSE)of CE,even against the impacts of parameter variations.

Wavelet Denoising Applied to Hardware Redundant Systems for Rolling Element Bearing Fault Detection

This work presents a novel wavelet-based denoising technique for improving the signal-to-noise ratio(SNR)of nonsteady vibration signals in hardware redundant systems.The proposed method utilizes the relationship between redundant hardware components to effectively separate fault-related components from the vibration signature,thus enhancing fault detection accuracy.The study evaluates the proposed technique on two mechanically identical subsystems that are simultaneously controlled under the same speed and load inputs,with and without the proposed denoising step.The results demonstrate an increase in detection accuracy when incorporating the proposed denoising method into a fault detection system designed for hardware redundant machinery.This work is original in its application of a new method for improving performance when using residual analysis for fault detection in hardware redundant machinery configurations.Moreover,the proposed methodology is applicable to nonstationary equipment that experiences changes in both speed and load.

Scheduling Algorithm Based on Storage Capacity of Communication in Hardware/Software Integrated System

In this paper, the storage capacity of communication among cores and processors is taken into account and a maximum D-value-first algorithm is proposed. By improving the hardware parallelism in the task execution process, the maximum storage requirements for communication are minimized. Experimental results with various directed acyclic graph models showed that compared with the earliest-task-first algorithm, the storage requirements for communication were reduced by 22.46%, on average, while the average of makespan only increased by 0.82%,.

The Logic Description of the System of Embedded Hardware Logic Task

A new task mode, hardware logic task mode, is presented. Its architecture, schedule and implementation are described with HDI.（ Hardware Description Language ）, and the validity of the system has been proved by logic simulation. It has advantage for real-time applications and overheadsaving for operating .system, so it is profitable for the controller in the embedded system. The relationship among RTOS （Real-Time Operating System）, SoC（System on Chip）, VIA （Virtual Interface Architecture） and hardware logic task is also discussed in the paper.

FPGA based hardware platform for trapped-ion-based multi-level quantum systems

We report a design and implementation of a field-programmable-gate-arrays(FPGA)based hardware platform,which is used to realize control and signal readout of trapped-ion-based multi-level quantum systems.This platform integrates a four-channel 2.8 Gsps@14 bits arbitrary waveform generator,a 16-channel 1 Gsps@14 bits direct-digital-synthesisbased radio-frequency generator,a 16-channel 8 ns resolution pulse generator,a 10-channel 16 bits digital-to-analogconverter module,and a 2-channel proportion integration differentiation controller.The hardware platform can be applied in the trapped-ion-based multi-level quantum systems,enabling quantum control of multi-level quantum system and highdimensional quantum simulation.The platform is scalable and more channels for control and signal readout can be implemented by utilizing more parallel duplications of the hardware.The hardware platform also has a bright future to be applied in scaled trapped-ion-based quantum systems.

Depth estimation system suitable for hardware design

Depth estimation is an active research area with the developing of stereo vision in recent years. It is one of the key technologies to resolve the large data of stereo vision communication. Now depth estimation still has some problems, such as occlusion, fuzzy edge, real-time processing, etc. Many algorithms have been proposed base on software, however the performance of the computer configurations limits the software processing speed. The other resolution is hardware design and the great developments of the digital signal processor （DSP）, and application specific integrated circuit （ASIC） and field programmable gate array （FPGA） provide the opportunity of flexible applications. In this work, by analyzing the procedures of depth estimation, the proper algorithms which can be used in hardware design to execute real-time depth estimation are proposed. The different methods of calibration, matching and post-processing are analyzed based on the hardware design requirements. At last some tests for the algorithm have been analyzed. The results show that the algorithms proposed for hardware design can provide credited depth map for further view synthesis and are suitable for hardware design.

A Novel Pipelining Encryption Hardware System with High Throughput and High Integration for 5G

This paper presents a ZUC-256 stream cipher algorithm hardware system in order to prevent the advanced security threats for 5 G wireless network.The main innovation of the hardware system is that a six-stage pipeline scheme comprised of initialization and work stage is employed to enhance the solving speed of the critical logical paths.Moreover,the pipeline scheme adopts a novel optimized hardware structure to fast complete the Mod(231-1)calculation.The function of the hardware system has been validated experimentally in detail.The hardware system shows great superiorities.Compared with the same type system in recent literatures,the logic delay reduces by 47%with an additional hardware resources of only 4 multiplexers,the throughput rate reaches 5.26 Gbps and yields at least 45%better performance,the throughput rate per unit area increases 14.8%.The hardware system provides a faster and safer encryption module for the 5G wireless network.

Design of a Hardware-Implemented Phase Calculating System for Feedback Control in the LHCD Experiments on EAST

A fully hardware-implemented phase calculating system for the feedback control in the lower-hybrid current drive （LHCD） experiments is presented in this paper. By taking advantages of field programmable gate array （FPGA） chips with embedded digital signal processing （DSP） cores and the Matlab-aided design method, the phase calculating algorithm with a square root operation and parallel process are efficiently implemented in a single FPGA chip to complete the calculation of phase differences fast and accurately in the lower-hybrid wave （LHW） system on EAST.

Robot navigation system using intrinsic evolvable hardware

Recently there has been great interest in the idea that evolvable system based on the principle of artifcial intelligence can be used to continuously and autonomously adapt the behaviour of physically embedded systems such as autonomous mobile robots and intelligent home devices. Meanwhile, we have seen the introduction of evolvable hardware(EHW): new integrated electronic circuits that are able to continuously evolve to adapt the chages in the environment implemented by evolutionary algorithms such as genetic algorithm(GA) and reinforcement learning. This paper concentrates on developing a robotic navigation system whose basic behaviours are obstacle avoidance and light source navigation. The results demonstrate that the intrinsic evolvable hardware system is able to create the stable robotiiuc behaviours as required in the real world instead of the traditional hardware systems.

System-on-a-Chip (SoC) Based Hardware Acceleration for Video Codec

Nowadays, from home monitoring to large airport security, a lot of digital video surveillance systems have been used. Digital surveillance system usually requires streaming video processing abilities. As an advanced video coding method, H.264 is introduced to reduce the large video data dramatically (usually by 70X or more). However, computational overhead occurs when coding and decoding H.264 video. In this paper, a System-on-a-Chip (SoC) based hardware acceleration solution for video codec is proposed, which can also be used for other software applications. The characteristics of the video codec are analyzed by using the profiling tool. The Hadamard function, which is the bottleneck of H.264, is identified not only by execution time but also another two attributes, such as cycle per loop and loop round. The Co-processor approach is applied to accelerate the Hadamard function by transforming it to hardware. Performance improvement, resource costs and energy consumption are compared and analyzed. Experimental results indicate that 76.5% energy deduction and 8.09X speedup can be reached after balancing these three key factors.

New Approach for Hardware/Software Embedded System Conception Based on the Use of Design Patterns

This paper deals with a new hardware/software embedded system design methodology based on design pattern approach by development of a new design tool called smartcell. Three main constraints of embedded systems design process are investigated: the complexity, the partitioning between hardware and software aspects and the reusability. Two intermediate models are carried out in order to solve the complexity problem. The partitioning problem deals with the proposed hardware/software partitioning algorithm based on Ant Colony Optimisation. The reusability problem is resolved by synthesis of intellectual property blocks. Specification and integration of an intelligent controller on heterogeneous platform are considered to illustrate the proposed approach.