Unsteady natural convection Couette flow of heat generating/absorbing fluid between vertical parallel plates filled with porous material

The extended Brinkman Darcy model for momentum equations and an energy equation is used to calculate the unsteady natural convection Couette flow of a viscous incompressible heat generating/absorbing fluid in a vertical channel （formed by two infinite vertical and parallel plates） filled with the fluid-saturated porous medium. The flow is triggered by the asymmetric heating and the accelerated motion of one of the bounding plates. The governing equations are simplified by the reasonable dimensionless parameters and solved analytically by the Laplace transform techniques to obtain the closed form solutions of the velocity and temperature profiles. Then, the skin friction and the rate of heat transfer are consequently derived. It is noticed that, at different sections within the vertical channel, the fluid flow and the temperature profiles increase with time, which are both higher near the moving plate. In particular, increasing the gap between the plates increases the velocity and the temperature of the fluid, however, reduces the skin friction and the rate of heat transfer.

Natural Convection Flow of Heat Generating/Absorbing Fluid near a Vertical Plate with Ramped Temperature

This study considers a theoretical analysis of natural convection flow of heat generating/absorbing fluid near an infinite vertical plate with ramped temperature. It is assumed that the bounding plate has a ramped temperature profile. Exact solutions of energy and momentum equations are obtained using the Laplacetransform techniques. Solutions are obtained for different values of the Prandtl number (Pr) and the heat sink parameter (S). Results of the ramped and isothermal temperature and velocity as well as Nusselt number and skin friction have been compared and presented with the help of graphs.

Heat-Generating Effects Involving Multiple Nanofluids in a Hybrid Convective Boundary Layer Flow on the Sloping Plate in a Porous Medium

The hybrid convective boundary layer circulation involving multiple nanofluids via a medium with pores is approaching a sloping plate. An investigation regarding the heat-generating effects upon the examined nanofluid flows has been carried out through computational analysis. A mathematical framework employing governing differential equations that are partial has been implemented to produce an ensemble of ordinary differential equations, which happen to be nonlinear that incorporate nanofluid flows by utilizing acceptable transformations. Through the combination of the Nachtsheim-Swigert shooting method and the Runge-Kutta method, the group of resulting non-dimensionalized equations is solved computationally. In a few special, confined cases, the corresponding numeric output is thereafter satisfactorily matched with the existing available research. The consequences of heat generation regarding local skin friction coefficient and rate of heat in conjunction with mass transfer have been investigated, evaluated, and reported on the basis of multiple nanofluid flows.

Preparation and Characterization of Mullite-Silicon Carbide Heat Absorbing Ceramics for Solar Thermal Tower Plant

The in-situ synthesized mullite bonded SiC ceramics for solar thermal tower plant were prepared from Silicon carbide （SIC）, manufactured aluminum hydroxide （Al（OH）3） and Suzhou kaolin via semi-dry pressing and pressureless firing. The results indicate that sample B3 （designed mullite content 15 wt%） fired at 1 400 ℃ exhibited optimal performance with a bending strength of 97.41 MPa. Sample B3 can withstand 30-cycles thermal shock without cracking （wind cooling from 1 100 ℃ to room temperature）, and the bending strength after thermal shock decreased by 17.92%. When the service temperature is 600℃, the thermal diffusivity, specific heat capacity, thermal conductivity and heat capacity are 6.48× 10-2 cm：.s-1, 0.69 kJ·kg-1. K-1, 9.62 W·m-1·K-1 and 977.76 kJ·kg-1, respectively. The XRD and SEM results show that SiC, mullite, or-quartz, and tridymite are connected closely, which gives the material a good bending strength. After 30-time thermal shock cycles, the structure of samples becomes loose. SiC grains are intersectingly arranged with rodshape mullite, exhibiting a favorable thermal shock resistance. The addition of Al（OH）3 and Suzhou kaolin can accelerate the synthesis of mullite, thus to reduce the firing temperature effectively. The volume effect of tfidymite is relatively small, improving the thermal shock resistance of materials. A higher designed muUite content yields a lower loss rate of bending strength. The mullite content should not be more than 15 wt% or else the bending strength would be diminished.

Recovery of Solid Oxide Fuel CellWaste Heat by Thermoelectric Generators and AlkaliMetal Thermoelectric Converters

A Solid Oxide Fuel Cell(SOFC)is an electrochemical device that converts the chemical energy of a substance into electrical energy through an oxidation-reduction mechanism.The electrochemical reaction of a solid oxide fuel cell(SOFC)generates heat,and this heat can be recovered and put to use in a waste heat recovery system.In addition to preheating the fuel and oxidant,producing steam for industrial use,and heating and cooling enclosed rooms,this waste heat can be used for many more productive uses.The large waste heat produced by SOFCs is a worry that must be managed if they are to be adopted as a viable option in the power generation business.In light of these findings,a novel approach to SOFC waste heat recovery is proposed.The SOFC is combined with a“Thermoelectric Generator and an Alkali Metal Thermoelectric Converter(TG-AMTC)”to transform the excess heat generated by both the SOFC and the TG-AMTC.The proposed TG-AMTC is evaluated using a number of performance indicators including power density,operating temperature,heat recovery rate,exergetic efficiency,energy efficiency,and recovery time.The experimental results state that TG-AMTC has provided an exergetic efficiency,energetic efficiency,and recovery time of 97%,98%,and 23%,respectively.The study proves that the proposed TG-AMTC for SOFC is an efficient method of recovering waste heat.

Influence of Patch Side of Heat-Ray Absorbing Film on One-Dimensional Unsteady Thermal Stresses in Window Glass

Heat-ray absorbing film is used to be bonded on the existing sheet glasses of the windows.It is effective for air-conditioning energy saving against the global warming,because it absorbs heat-ray in the thin film and decreases the incoming heat-ray into the room.On the other hand,the sheet glasses increase the temperature at the surface which the sheet is bonded and sometimes yield heat cracks by thermal stresses.It is important to know the state of thermal stresses accurately in order to develop the heat-ray absorbing film with higher performance and without heat cracks.In this paper,the analysis model is treated as the two-layer plate of the conventional soda sheet glass and the heat-ray absorbing film with different absorptivities.The unsteady temperature and thermal stresses are analyzed and calculated numerically.The influence of the patch side,which the heat-ray absorbing film is bonded at the exterior side or the interior side,on the heat-ray absorbing performance and the thermal stresses is discussed.It is found that the alternative patch side has no effect on the heat-ray absorbing performance and that the patch side is recommended to be interior side from a view point of decreasing thermal stresses against the heat crack of glasses.

Experimental research on a new encapsulated heat-generating hydraulic fracturing fluid system

During fracturing treatment for low-temperature, shallow and high freezing point oil reservoirs, the first-line problems are to overcome uncompleted breakdown, uncompleted cleanup of fracturing fluids and cold damages to the formations by injecting cold fluid. To avoid those problems, it is suggested to adopt a new encapsulated heat-generating hydraulic fracturing fluid system as described in this paper.; Firstly, two kinds of chemical heat-generating systems were studied and the NH-4Cl-NaNO-2 system was selected. According to the reaction characteristics of the system, oxalic acid was chosen as a catalyst of reaction and encapsulated using ethyl cellulose and paraffin as coating materials by the phase separation method. Compatibility of NH-4Cl-NaNO-2-encapsulated oxalic acid with hydroxypropyl-guar fracturing fluid was also discussed in the paper. The results showed that the hydraulic fracturing fluid containing encapsulated heat-generating agents hare a good stability and compatibility. When the fracturing fluid contains {2.0} mol·L+{-1} NH-4Cl-NaNO-2, {0.93%} encapsulated oxalic acid and {0.08%} ammonium persulfate, the peak temperature can reach {78.0℃} and the viscosity of residual liquid is {3.12} mPa·s after 4 hours.

The optimal performance of a generalized Carnot cycle for a generalized heat transfer law

The finite time thermodynamic performance of a generalized Carnot cycle, in which the heat transfer between the working fluid and the heat reservoirs obeys the generalized law Q∝( Δ T) m , is studied. The optimal configuration and the fundamental optimal relation between power and efficiency of the cycle are derived. Some special examples are discussed. The results can provide some theoretical guidance for the design a practical engine.

Study on Matching a 300 MVA Motor Generator with an Ohmic Heating Power Supply in HL-2M

A new 300 MVA/1350 MJ motor generator （MG） will be built to feed all of the poloidal field power supplies （PFPS） and auxiliary heating power supplies of the HL-2M tokamak. The MG has a vertical-shaft salient pole 6-phase synchronous generator and a coaxial 8500 kW induction motor. The Ohmic heating power supply （OHPS） consisting of 4-quadrant DC pulsed convertor is the one with the highest parameters among the PFPS. Therefore, the match between the generator and the OHPS is very important. The matching study with Matlab/Simulink is described in this paper. The simulation results show that the subtransient reactance of the generator is closely related to the inversion operation of the OHPS. By setting various subtransient reactance in the simulation generator model and considering the cost reduction, the optimized parameters are obtained as xd＂ = 0.405 p.u. at 100 Hz for the generator. The models built in the simulation can be used as an important tool for studying the dynamic characteristics and the control strategy of other HL-2M PFPSes.

Bounds on the absorbant number of generalized Kautz digraphs

The generalized Kautz digraphs have many good properties as interconnection network topologies. In this note, the bounds of the absorbant number for the generalized Kautz digraph are given, and some sufficient conditions for the absorbant number of the generalized Kautz digraph attaining the bounds are presented.

Large Eddy Simulation of New Vortex Generator Enhancing Heat Exchange of Solar Energy

This paper put forward a new-type vortex generator enhancing heat exchange of solar air-drier and air-heater on the gas side,and investigated the mechanism of heat transfer enhancement and drag reduction by the influence of vortex generators on the coherent structure of turbulent boundary layer.The flow and heat transfer characteristics of rectangle channel with bevel-cut half-elliptical column vortex generators were obtained using large eddy simulation(LES)and the hydromechanics software FLUENT6.3.The instantaneous properties of velocity,temperature and pressure in channel were gained.The coherent structure of turbulent boundary layer flow was showed,and the characteristic of vortex induced by inclined-cut semi-ellipse vortex generator and its influence on turbulent coherent structure were analyzed.And the effect mechanism of turbulent coherent structure on flow field,pressure field and temperature field was discussed.Based on the results,the heat transfer coefficient and drag reduction of the new vortex generator with different pitch angles were compared.Sometimes,the coherent effects of the increased wall heat transfer and the decreased skin friction do not satisfy the Reynolds analogy.The turbulent coherent structure can be controlled through the geometry of the vortex generator,so the heat transfer and drag reduction can also be controlled.Then we can seek suitable form of vortex generator and structure parameters,in order to achieve the enhanced heat transfer and flow of drag reduction in the solar air-heater and solar air-drier.

CFD-Based Simulation and Analysis of Hydrothermal Aspects in Solar Channel Heat Exchangers with Various Designed Vortex Generators

The hydrothermal behavior of air inside a solar channel heat exchanger equipped with various shaped ribs is analyzed numerically.The bottom wall of the exchanger is kept adiabatic,while a constant value of the temperature is set at the upper wall.The duct is equipped with a flat rectangular fin on the upper wall and an upstream V-shaped baffle on the lower wall.Furthermore,five hot wall-attached rib shapes are considered:trapezoidal,square,triangular pointing upstream(type Ⅰ),triangular pointing downstream(type Ⅱ),and equilateral-triangular(type Ⅲ)cross sections.Effects of the flow rates are also inspected for various Reynolds numbers in the turbulent regime(1.2×10^(4)-3.2×10^(4)).The highest performance(η)value is given for the Ⅱ-triangular rib case in all Re values,while the square-shaped ribs show a significant decrease in the η along the achieved Re range.The η value at Remax is 2.567 for the Ⅱ-triangular roughness case.Compared with the other simulated cases,this performance is decreased by about 3.768%in the case of Ⅰ-triangular ribs,15.249% in the case of Ⅲ-triangular ribs,20.802% in the case of trapezoidal ribs,while 27.541% in the case of square ribs,at the same Remax.Also,a comparison ismade with air-heat exchangers that have non-rough walls and contain cross-shaped VGs presented previously,in order to highlight the effectiveness of the rough surface presence in the baffled and finned channels.The obtained results indicated that the triangular-shaped rib(type Ⅱ)has the most significant hydrothermal behavior than the other cases.This indicates the necessity of roughness heat transfer surfaces for finned and baffled channels to improve significantly the performance of the air-heat exchangers they contain.

Simulating the Turbulent Hydrothermal Behavior of Oil/MWCNT Nanofluid in a Solar Channel Heat Exchanger Equipped with Vortex Generators

Re-engineering the channel heat exchangers(CHEs)is the goal of many recent studies,due to their great importance in the scope of energy transport in various industrial and environmental fields.Changing the internal geometry of the CHEs by using extended surfaces,i.e.,VGs(vortex generators),is the most common technique to enhance the efficiency of heat exchangers.This work aims to develop a newdesign of solar collectors to improve the overall energy efficiency.The study presents a new channel design by introducing VGs.The FVM(finite volume method)was adopted as a numerical technique to solve the problem,with the use of Oil/MWCNT(oil/multi-walled carbon nano-tubes)nanofluid to raise the thermal conductivity of the flow field.The study is achieved for a Re number ranging from12×10^(3) to 27×10^(3),while the concentration(φ)of solid particles in the fluid(Oil)is set to 4%.The computational results showed that the hydrothermal characteristics depend strongly on the flow patterns with the presence of VGs within the CHE.Increasing the Oil/MWCNT rates with the presence of VGs generates negative turbulent velocities with high amounts,which promotes the good agitation of nanofluid particles,resulting in enhanced great transfer rates.

Reversible and irreversible heat generation of NCA/Si–C pouch cell during electrochemical energy-storage process

To meet the requirements of electronic vehicles(EVs) and hybrid electric vehicles(HEVs),the high energy density Li Ni_(0.8) Co_(0.15) Al_(0.05) O_2(NCA) cathode and Si–C anode have attracted more attention.Here we report the thermal behaviors of NCA/Si–C pouch cell during the charge/discharge processes at different current densities.The total heat generations are derived from the surface temperature change during electrochemical Li+insertion/extraction in adiabatic surrounding.The reversible heat is determined by the entropic coefficients,which are related with open-circuit voltage at different temperatures; while the irreversible heat is determined by the internal resistance,which can be obtained via V–I characteristic,electrochemical impedance spectroscopy and hybrid pulse power characterization(HPPC).During the electrochemical process,the reversible heat contributes less than 10% to total heat generation; and the heat generated in charge process is less than that in discharge process.The results of thermal behaviors analyses are conducive to understanding the safety management and paving the way for building a reliable thermal model of high energy density lithium ion battery.

Waste Heat Recovery from a Drier Receiver of an A/C Unit Using Thermoelectric Generators

Thermoelectric generators(TEGs)are considered promising devices for waste heat recovery from various systems.The Seebeck effect can be utilized to generate power using the residual heat emitted by the filter dryer receiver(FDR)of an air conditioning(A/C)system,which would otherwise go to waste.The study aims to build a set of thermoelectric generators(TEG)to collect the waste heat of the FDR and generate low-power electricity.A novel electrical circuit with two transformers is designed and fabricated to produce a more stable voltage for operation and charging.The thermoelectric generator(TEGs)was installed on the FDR of the A/C unit.The test showed that climate conditions have a significant impact on the output power generated from the system.The results showed that the peak voltage recorded in the current study is 5.2 V per day(wet,cold,and wind weather)with an output power of 0.2 W.These values are acceptable for powering the load and charging a single battery with 3.5 V as the voltage increases battery 0.1 V/20 min charge.A case study of operating the emergency signs in a building was considered.The current heat recovery system is deemed to be easily installed and can be connected to a network of TEGs to produce more power.

Feasibility Demonstrations of Liquid Turbine Power Generator Driven by Low Temperature Heats

Lower temperature waste heats less than 373 K have strong potentials to supply additional energies because of their enormous quantities and ubiquity. Accordingly, reinforcement of power generations harvesting low temperature heats is one of the urgent tasks for the current generation in order to accomplish energy sustainability in the coming decades. In this study, a liquid turbine power generator driven by lower temperature heats below 373 K was proposed in the aim of expanding selectable options for harvesting low temperature waste heats less than 373 K. The proposing system was so simply that it was mainly composed of a liquid turbine, a liquid container with a biphasic medium of water and an underlying water-insoluble low-boiling-point medium in a liquid phase, a heating section for vaporization of the liquid and a cooling section for entropy discharge outside the system. Assumed power generating steps via the proposing liquid turbine power generator were as follows: step 1: the underlying low-boiling-point medium in a liquid phase was vaporized, step 2: the surfacing vapor bubbles of low-boiling-point medium accompanied the biphasic medium in their wakes, step 3: such high momentum flux by step 2 rotated the liquid turbine (i.e. power generation), step 4: the surfacing low-boiling-point medium vapor was gradually condensed into droplets, step 5: the low-boiling-point medium droplets were submerged to the underlying medium in a liquid phase. Experiments with a prototype liquid turbine power generator proved power generations in accordance with the assumed steps at a little higher than ordinary temperature. Increasing output voltage could be obtained with an increase in the cooling temperature among tested ranging from 294 to 296 K in contrast to normal thermal engines. Further improvements of the direct current voltage from the proposing liquid turbine power generator can be expected by means of far more vigorous multiphase flow induced by adding solid powders and theoretical optimizations of heat and mass transfers.

An Unsteady Oscillatory Flow of Generalized Casson Fluid with Heat and Mass Transfer:A Comparative Fractional Model

It is of high interest to study laminar flow with mass and heat transfer phenomena that occur in a viscoelastic fluid taken over a vertical plate due to its importance in many technological processes and its increased industrial applications.Because of its wide range of applications,this study aims at evaluating the solutions corresponding to Casson fluids’oscillating flow using fractional-derivatives.As it has a combined mass-heat transfer effect,we considered the fluid flow upon an oscillatory infinite vertical-plate.Furthermore,we used two new fractional approaches of fractional derivatives,named AB(Atangana–Baleanu)and CF(Caputo–Fabrizio),on dimensionless governing equations and then we compared their results.The Laplace transformation technique is used to get the most accurate solutions of oscillating motion of any generalized Casson fluid because of the Cosine oscillation passed over the infinite vertical-plate.We obtained and analyzed the distribution of concentration,expressions for the velocity-field and the temperature graphically,using various parameters of interest.We also analyzed the Nusselt number and the skin friction due to their important engineering usage.

Output power analyses of an endoreversible Carnot heat engine with irreversible heat transfer processes based on generalized heat transfer law

In this paper, an endoreversible Carnot heat engine with irreversible heat transfer processes is analyzed based on generalized heat transfer law. The applicability of the entropy generation minimization, exergy analyses method, and entransy theory to the analyses is discussed. Three numerical cases are presented. It is shown that the results obtained from the entransy theory are different from those from the entropy generation minimization, which is equivalent to the exergy analyses method. For the first case in which the application preconditions of the entropy generation minimization and entransy loss maximization are satisfied, both smaller entropy generation rate and larger entransy loss rate lead to larger output power. For the second and third cases in which the preconditions are not satisfied, the entropy generation minimization does not lead to the maximum output power, while larger entransy loss rate still leads to larger output power in the third case. For the discussed cases, the concept of entransy dissipation is not applicable for the analyses of output power.The problems in the negative comments on the entransy theory are pointed out and discussed. The related researchers are advised to focus on some new specific application cases to show if the entransy theory is the same as some other theories.

A GENERAL DECAY AND OPTIMAL DECAY RESULT IN A HEAT SYSTEM WITH A VISCOELASTIC TERM

We consider a quasilinear heat system in the presence of an integral term and establish a general and optimal decay result from which improves and generalizes several stability results in the literature.

Influence of Different Vortex Generators on Heat Transfer in Direct Air-Cooled Condensers

通过数值模拟研究了矩形小翼、三角小翼、梯形小翼、柱面梯形翼、柱面三角翼和柱面矩形翼等6种涡流发生器分别安装于直接空冷凝汽器单排蛇形翅片扁管中的压降和换热性能。Re数在600~1800范围内,涡流发生器采用相同高宽比、尾高、攻角以及安装位置。结果表明：矩形小翼的换热及压降增大最多,Re=1729时,相比平直翅片分别增加了14.27%和18.32%。Re=1 729时,柱面梯形翼的压力损失比矩形小翼少4.7%,换热低1.5%。当以（j/j0）/（f/f0）1/3作为综合换热性能评价标准时,柱面梯形翼的综合换热性能最好。另外,考察了柱面梯形翼倾角的影响（0°、6°、12°、20°、24°和26°）,相同工况下,倾角为12°的柱面梯形翼换热最好（较平直翅片增强4.29%~14.1%）、压降最小（增大7.5%~12.8%）且综合换热性能最好。柱面梯形翼因其迎流面积与斜边长度的匹配以及流线型柱面,具有良好的强化传热效果以及较小的压降。