Layout Design of Conductive Heat Channel by Emulating Natural Branch Systems

To design effective and easy-to-manufacture conductive heat channels, a heuristic method by emulating the natural branch systems is suggested. The design process of the method is divided into two steps, which are the principal channel design and the lateral channel design. During the process, the width of each channel is controlled by the bifurcation law, and the end point of the channel is located at the point with the maximum temperature while the start points of the principal channel and the lateral channel are respectively determined by the location of the heat sink and the law of the minimum thermal resistance. Four design examples with different boundary conditions are studied by the suggested method, and the design results are compared with that of the traditional structural topology optimization method. Not only lower maximum temperature and relatively uniform distribution of temperature are obtained by the suggested method, but also straight channels are achieved without gray element, which is easy to manufacture. The suggested method inspired by the natural branch systems can provide an effective solution for heat channel design in the heat dissipation structures.

Simulating the Turbulent Hydrothermal Behavior of Oil/MWCNT Nanofluid in a Solar Channel Heat Exchanger Equipped with Vortex Generators

Re-engineering the channel heat exchangers(CHEs)is the goal of many recent studies,due to their great importance in the scope of energy transport in various industrial and environmental fields.Changing the internal geometry of the CHEs by using extended surfaces,i.e.,VGs(vortex generators),is the most common technique to enhance the efficiency of heat exchangers.This work aims to develop a newdesign of solar collectors to improve the overall energy efficiency.The study presents a new channel design by introducing VGs.The FVM(finite volume method)was adopted as a numerical technique to solve the problem,with the use of Oil/MWCNT(oil/multi-walled carbon nano-tubes)nanofluid to raise the thermal conductivity of the flow field.The study is achieved for a Re number ranging from12×10^(3) to 27×10^(3),while the concentration(φ)of solid particles in the fluid(Oil)is set to 4%.The computational results showed that the hydrothermal characteristics depend strongly on the flow patterns with the presence of VGs within the CHE.Increasing the Oil/MWCNT rates with the presence of VGs generates negative turbulent velocities with high amounts,which promotes the good agitation of nanofluid particles,resulting in enhanced great transfer rates.

Experimental Investigation on Convective Heat Transfer Characteristics in Ribbed Channel

The heat transfer and pressure loss characteristics on a square channel with two opposite surfaces roughened by high blockage ratio ribs are measured by systematic experiments.Reynolds numbers studied in the channel range from 1 400 to 8 000.The ratios of rib height to hydraulic diameter (e/D) are 0.2and 0.33,respectively.The ratio of rib spacing to height (P/e) ranges from 5to 15.The rib orientations in the opposite surfaces are symmetrical and staggered arrangements.The results show that the heat transfer coefficients are increased with the increase of rib height and Reynolds number,though at the cost of higher pressure losses.When the rib spacing to height ratio is 10,it keeps the highest heat transfer coefficient in three kinds of rib spacing to height ratios 5,10 and 15.The heat transfer coefficient of symmetrical arrangement ribs is higher than that of the staggered arrangement ribs,but the pressure loss of the symmetrical arrangement ribs is larger than that of the staggered arrangement ribs.

Magnetohydrodynamic peristaltic flow of a hyperbolic tangent fluid in a vertical asymmetric channel with heat transfer

In the present paper we discuss the magnetohydrodynamic （MHD） peristaltic flow of a hyperbolic tangent fluid model in a vertical asymmetric channel under a zero Reynolds number and long wavelength approximation. Exact solution of the temperature equation in the absence of dissipation term has been computed and the analytical ex- pression for stream function and axial pressure gradient are established. The flow is analyzed in a wave frame of reference moving with the velocity of wave. The expression for pressure rise has been computed numerically. The physical features of pertinent parameters are analyzed by plotting graphs and discussed in detail.

Experimental Investigation on Flow and Heat Transfer of Jet Impingement inside a Semi-Confined Smooth Channel

Experimental investigation is conducted to investigate the flow and heat transfer performances of jet impingement cooling inside a semi-confined smooth channel.Effects of jet Reynolds number(varied from 10 000to 45000),orifice-to-target spacing(zn=1d—4d)and jet-to-jet pitches(xn=3d—5d,yn=3d—5d)on the convective heat transfer coefficient and discharge coefficient are revealed.For a single-row jets normal impingement,the impingement heat transfer is enhanced with the increase of impingement Reynolds number or the decrease of spanwise jet-to-jet pitch.The highest local heat transfer is achieved when zn/dis 2.For the double-row jets normal impingement,the laterally-averaged Nusselt number distributions in the vicinity of the first row jets impinging stagnation do not fit well with the single-row case.The highest local heat transfer is obtained when zn/dis 1.A smaller jetto-jet pitch generally results in a lower discharge coefficient.The discharge coefficient in the double-row case is decreased relative to the single-row case at the same impingement Reynolds number.

Numerical Study of Turbulent Periodic Flow and Heat Transfer in a Square Channel with Different Ribs

A numerical investigation has been carried out to examine turbulent flow and heat transfer characteristics in a three-dimensional ribbed square channels. Fluent 6.3 CFD code has been used. The governing equations are discretized by the second order upwind differencing scheme, decoupling with the SIMPLE (semi-implicit method for pressure linked equations) algorithm and are solved using a finite volume approach. The fluid flow and heat transfer characteristics are presented for the Reynolds numbers based on the channel hydraulic diameter ranging from 104 to 4 ′ 104. The effects of rib shape and orientation on heat transfer and pressure drop in the channel are investigated for six different rib configurations. Rib arrays of 45° inclined and 45° V-shaped are mounted in inline and staggered arrangements on the lower and upper walls of the channel. In addition, the performance of these ribs is also compared with the 90° transverse ribs.

Geologic-Geophysical Indicators of the Deep Structure of Zones of Geothermal Anomalies for Allocation of Channels of the Deep Heat and Mass Transfer

On the basis of the analysis of field thermogeochemical data along abnormal zones of a thermal stream in the Bukhara-Khiva, oil-and-gas region of the Turan (Tegermen, Chagakul, Shimoly Alat, Beshtepa) was succeeded to obtain important data on a deep structure of sites. Data of gas-chemical and geothermal observations show about confinedness of abnormal concentration of methane to zones of the increased values of the temperature field the measured values of temperatures (Tegermen Square and others). On geoelectric section mines 2-D of inversion of the MT-field depth of 4000 m are lower, among very high-resistance the chemogenic and carbonate deposits of the Paleozoic is traced the subvertical carrying-out abnormal zone. This zone is identified as the channel of a deep heat and mass transfer with which hydrocarbon (HC) deposits are connected. It is shown that electro-investigation when using a geophysical complex can and has to become “advancing” at exploration by oil and gas.

Mixed convection heat transfer in horizontal channel filled with nanofluids

The laminar fully developed nanofluid flow and heat transfer in a horizonal channel are investigated. Highly accurate solutions for the temperature and nanopavticle concentration distributions are obtained. The effects of the Brownian motion parameter Nb, the thermophoresis parameter Nt, and the Lewis number Le on the temperature and nanoparticle concentration distributions are discussed. The current analysis shows that the nanoparticles can improve the heat transfer characteristics significantly for this flow problem.

Air Cooling of Mini-Channel Heat Sink in Electronic Devices

Heat transfer experiments were conducted to investigate the thermal performance of air cooling through mini-channel heat sink with various configurations. Two types of channels have been used, one has a rectangular cross section area of 5 × 18 mm2 and the other is triangular with dimension of 5 × 9 mm2. Four channels of each configuration have been etched on copper block of 40 mm width,30 mm height, and 200 mm length. The measurements were performed in steady state with air flow rates of 0.002 - 0.005 m3/s, heating powers of 80 - 200 W and channel base temperatures of 48°C, 51°C, 55°C and 60°C. The results showed that the heat transfer to air stream is increased with increasing both of air mass flow rate and channel base temperature. The rectangular channels have better thermal performance than trian- gular ones at the same conditions. Analytical fin approach of 1-D and 2-D model were used to predict the heat transfer rate and outlet air temperature from channels heat sink. Theoretical results have been compared with experimental data. The predicted values for outlet air temperatures using the two models agree well with a deviation less than ±10%. But for the heat transfer data, the deviation is about +30% to –60% for 1-D model, and –5% to –80% for 2-D model. The global Nusselt number of the present experimental data is empirically correlated as with accuracy of ±20% for and compared with other literature correlations.

Research on a Manifold Micro-channel Heat Sink Applied in High Concentrated Solar Cells

该文对歧管式微通道冷却技术在聚光电池冷却方面的应用进行了理论和实验研究。歧管式微通道冷却技术有助于在较小的空间内实现高热流密度冷却，较为适合高聚光比的密集阵列聚光电池系统。文中对歧管式微通道热沉热阻的计算方法进行改进，建立该种结构完全基于半经验公式的一维传热模型，并分析影响总热阻的主要因素。同时，对电池-热沉系统进行实验。实验结果表明，在此范围内实验与计算结果具有良好的一致性，电池-热沉系统的整体热阻低于1×10-4 m2·℃/W。结合聚光电池的性能模型，可获得电池的最大输出功率、效率、温度等性能参数随聚光比的变化情况。

Mathematical Analysis of Unsteady MHD Blood Flow through Parallel Plate Channel with Heat Source

In the present study, a mathematical model of unsteady blood flow through parallel plate channel under the action of an applied constant transverse magnetic field is proposed. The model is subjected to heat source. Analytical expressions are obtained by choosing the axial velocity;temperature distribution and the normal velocity of the blood depend on y and t only to convert the system of partial differential equations into system of ordinary differential equations under the conditions defined in our model. The model has been analyzed to find the effects of various parameters such as, Hartmann number, heat source parameter and Prandtl number on the axial velocity, temperature distribution and the normal velocity. The numerical solutions of axial velocity, temperature distributions and normal velocity are shown graphically for better understanding of the problem. Hence, the present mathematical model gives a simple form of axial velocity, temperature distribution and normal velocity of the blood flow so that it will help not only people working in the field of Physiological fluid dynamics but also to the medical practitioners.

Heat Transfer and Friction Characteristics in Rectangular Channel using Different Coolants

Several industrial applications such as electronic devices,heat exchangers,gas turbine blades,etc.need cooling processes.The internal cooling technique is proper for some applications.In the present work,computational simulations were made using ANSYS CFX to predict the improvements of internal heat transfer in the rectangular ribbed channel using different coolants.Several coolants such as air,steam,air/mist and steam/mist were investigated.The shear stress transport model(SST)is selected by comparing the standard k-ωand Omega Reynolds Stress(ωRS)turbulence models with experimental results.The results indicate that the heat transfer coefficients are enhanced in the ribbed channel while injecting small amounts of mist.The heat transfer coefficients of air/mist,steam and steam/mist increase by 12.5%,49.5%and 107%over that of air,respectively.Furthermore,in comparison to air,the air/mist heat transfer coefficient enhances by about 1.05 to 1.14 times when the mist mass fraction increases from 2%to 8%,respectively.The steam/mist heat transfer coefficient increases by about 1.12 to 1.27 times higher than that of steam over the considered range of mist mass fraction.

Fluid Flow and Heat Transfer Charateristics in a 180-deg Round Turned Channel with a Perforated Divider

This study provided a new configuration of the 180-deg round turned channel with a perforated divider, as well as numerically investigated the effect of perforations, including the diameter of perforation and the angel of perforation, on the fluid flow and heat transfer. The numerical results appeared in good agreement with previous experimental data under the same operating conditions. The results indicated that large size and positive angle of perforation changed the fluid flow pattern and the local Nusselt-number distribution fundamentally. It is noteworthy that a more uniform distribution of Nusselt-number was achieved by increasing the diameter of perforation.

Viscoelastic Effects on Unsteady Two-Dimensional and Mass Transfer of a Viscoelastic Fluid in a Porous Channel with Radiative Heat Transfer

An analysis of oscillatory flow of a viscoelastic fluid and mass transfer along a porous oscillating channel with radiative heat transfer in presence of first-order chemical reaction is considered. The problem is concerned with the flow through a channel in which the viscoelastic fluid is injected on one boundary of the channel with a constant velocity, while it is sucked off at the other boundary with the same velocity. The two boundaries are considered to be in close contact with the two plates placed parallel to each other. The effect of temperature oscillations at the plate (upper wall) where the suction takes place is taken into consideration. The plates are supposed to be oscillating with a given velocity in their own planes. Analytical expressions for velocity profile, the temperature, concentration profile, wall shear stress on the upper wall are obtained. The profiles of the velocity and skin friction have been presented graphically for different values of the viscoelastic parameters with the combination of the other flow parameters encountered in the problem under investigation. It is observed that velocity decrease with the increasing values of the viscoelastic parameter in comparison with Newtonian fluid. Also, the wall shear stress increase with the increasing values of the viscoelastic parameter.

Peristaltic Transport of Magnetohydrodynamic Carreau Nanofluid with Heat and Mass Transfer inside Asymmetric Channel

In this work, the peristaltic motion of a nano non-Newtonian fluid which obeys Carreau model through a porous medium inside an asymmetric channel is investigated. The hall current effects with Joule heating and viscous dissipation are considered. The problem is modulated mathematically by a set of nonlinear partial differential equations which describe the conservation of mass, momentum, energy and concentration of nanoparticles. The non-dimensional form of these equations is simplified under the assumption of long wavelength and low Reynolds number, and then resulting equations of coupled nonlinear differential equations are tackled numerically with appropriate boundary conditions. Graphical results are presented for dimensionless velocity, temperature, concentration and pressure gradient in order to illustrate the variations of various parameters of this problem on these obtained solutions.

Heat transfer in turbulent tube flow inserted with loose-fit multi-channel twisted tapes as swirl generators

Heat transfer and flow behaviors in three-dimensional circular tubes with loose-fit multiple channel twisted tapes were numerically studied. The investigation was examined for Reynolds numbers （Re） ranging from 5000 to 15,000, by using air as testing fluid. Effects of the multiple channel number （N = 2, 3, and 4）, clearance ratio （CR = 0.0, 0.025, 0.05, and 0.075） on heat transfer enhancement and flow friction were examined. The numerical results indicate that the tubes with loose-fit multiple channel twisted tapes perform higher heat transfer rates than the plain tube. The enhanced heat transfer rate is escorted with larger pressure drop. Both heat transfer and pressure drop increase with increasing multiple channel number （N） and decreasing clearance ratio （CR）. Heat transfer augmented by the loose-fit multiple channel twisted tape with N = 4 is higher than those enhanced by the ones with N = 2 and 3 by around 9.5-17.8% and 5.8-7.8%, respectively. In addition, the loose-fit multiple channel twisted tapes with clearance ratio of 0.025, 0.05, and 0.075 give lower heat transfer rates than the one with CR = 0.0 by around 8.4%, 17.5%, and 28.8%, respectively.

Transient Response Characteristics of Separated Flow and Heat Transfer in Enlarged Rectangular Channel

Numerical results of three-dimensional separated flow and heat transfer in an enlarged rectangular channel are presented in this paper. The expansion ratio and aspect ratio of the channel are 2.0 and 8.0, respectively. Reynolds number of the flow is 200 and it is over the critical Reynolds number. Over the value, the flow in the symmetric channel becomes to deflect to one side of the walls. Transient response characteristics of the flow and heat transfer in the channel with the fully developed flow imposed one cycle of a pulsating fluctuation at the inlet are investigated. Vortex structure generated in the channel is visualized with a helicity isosurface. In the case of the fluctuation of Strouhal number 0.05, small streamwise vortices appear near the side walls and slightly upstream of the reattachment region of the short separation bubble. The vortices elongate and shed some vortices. These vortices attract some pairs of the streamwise vortices near the reattachment region quickly and they drift downstream along the side walls. They are inclined from the walls and are decaying gradually. It is clarified that high Nusselt number area appears and shifts downstream in accordance with the root of the vortices.

Experiment on Boiling Heat Transfer of Refrigerant R134a in Mini-channels

The flow boiling heat transfer characteristics of refrigerant R134 a flowing inside two different kinds of minichannels are investigated. One channel is multi-port extruded with the hydraulic diameter of 0.63 mm,and the other one is rectangular with offset fins and a hydraulic diameter of 1.28 mm. The experiments are performed with a mass flow rate between 68 and 630 kg/(m^2·s),a heat flux between 9 and 64 kW/m^2,and a saturation pressure between 0.24 and 0.63 MPa,under the constant heat flux heating mode. It is found that the effect of mass flow rate on boiling heat transfer is related to heat flux,and that with the increase of heat flux,the effect can only be efficient in higher vapor quality region. The effects of heat flux and saturation pressure on boiling heat transfer are related to a threshold vapor quality,and the value will gradually decrease with the increase of heat flux or saturation pressure. Based on these analyses,a new correlation is proposed to predict the boiling heat transfer coefficient of refrigerant R134 a in the mini-channels under the experimental conditions.

Temperature Drop of Molten Metals in Open Channels

The temperature drop of molten metal flowing in open channels is numerically determined. Rectangular, trapezoidal and triangular geometries are considered. The overall heat transfer coefficients for the bottom, side walls and free surface of the channel have been taken from the literature. For each geometry, the volumetric flow rate, mean residence time and temperature drop as a function of the channel inclination angle were determined. The rectangular and trapezoidal geometries present the smallest temperature drops, while the triangular geometry presents the greatest temperature drop. The factors that most affect this drop are the value of the free surface area of the channel, and the average residence time of the molten metal in the channel.

Thermal performance of heat pipe with different micro-groove structures

Four kinds of micro heat pipe of trapezoidal groove wick structure with different numbers of grooves or aspect ratios were studied and compared about thermal transfer performances in order to optimize the manufacture of micro heat pipe with groove wick structure. The results show that these micro heat pipes have excellent performance in heat transfer; the equivalent thermal conductivity coefficient is two orders of magnitude compared with that of copper; the number and aspect ratio of grooves have a prominent effect on the performance of such thermal transfer. The optimum number of grooves is lower than 60 and the best aspect ratio is near to 1.5. The temperature and thermal transport rate are almost directly proportional relationship, but this relationship will be broken up suddenly when the critical heat flux is reached.