Rapid authentication of different herbal medicines by heating online extraction electrospray ionization mass spectrometry

The rapid and accurate authentication of traditional Chinese medicines(TCMs)has always been a key scientific and technical problem in the field of pharmaceutical analysis.Herein,a novel heating online extraction electrospray ionization mass spectrometry(H-oEESI-MS)was developed for the rapid and direct analysis of extremely complex substances without the requirement for any sample pretreatment or pre-separation steps.The overall molecular profile and fragment structure features of various herbal medicines could be completely captured within 10–15 s,with minimal sample(<0.5 mg)and solvent consumption(<20μL for one sample).Furthermore,a rapid differentiation and authentication strategy for TCMs based on H-oEESI-MS was proposed,including metabolic profile characterization,characteristic marker screening and identification,and multivariate statistical analysis model validation.In an analysis of 52 batches of seven types of Aconitum medicinal materials,20 and 21 key compounds were screened out as the characteristic markers of raw and processed Aconitum herbal medicines,respectively,and the possible structures of all the characteristic markers were comprehensively identified based on Compound Discoverer databases.Finally,multivariate statistical analysis showed that all the different types of herbal medicines were well differentiated and identified(R^(2)X>0.87,R^(2)Y>0.91,and Q^(2)>0.72),which further verified the feasibility and reliability of this comprehensive strategy for the rapid authentication of different TCMs based on H-oEESI-MS.In summary,this rapid authentication strategy realized the ultra-high-throughput,low-cost,and standardized detection of various complex TCMs for the first time,thereby demonstrating wide applicability and value for the development of quality standards for TCMs.

Coupled heat-fluid-solid numerical study on heat extraction potential of hot dry rocks based on discrete fracture network model

Fracture networks within hot dry rock(HDR)geothermal reservoirs are complex,and heat extraction via water injection is thus a coupled process of heat-fluid-solid multifield.In this paper,utilizing the theory of normally distributed random functions,we develop a corresponding pre-processing subprogram to establish a discrete network model of complex fracture distribution in HDR reservoirs;then construct a heat-fluid-solid finite element model for heat extraction via water injection and compare the numerical solution with the analytical solution of the one-dimensional non-isothermal consolidation problem for verification.The numerical simulation results show that the main factors affecting the heat extraction efficiency of HDR reservoirs include fracture width,fracture density,fracture permeability,and matrix permeability.When a HDR reservoir is injected with water for heat extraction,there is a certain threshold value of these influential parameters,beyond which the outlet temperature drops significantly,resulting in an obvious thermal breakthrough.When injecting water for heat extraction,the values of these parameters should be controlled and kept at a reasonable level,otherwise,the HDR reservoir may enter a thermal breakthrough stage in advance,which is not conducive for long-period heat extraction.Influenced by the random distribution of complex fractures,the leading edge of the cold front may present an irregular distribution.During the process of heat extraction,the stress gradually changes from a compressional state to a tensile state,which induces further damage to the HDR reservoir.

Large-scale physical simulation of injection and production of hot dry rock in Gonghe Basin,Qinghai Province,China

Based on the independently developed true triaxial multi-physical field large-scale physical simulation system of in-situ injection and production,we conducted physical simulation of long-term multi-well injection and production in the hot dry rocks of the Gonghe Basin,Qinghai Province,NW China.Through multi-well connectivity experiments,the spatial distribution characteristics of the natural fracture system in the rock samples and the connectivity between fracture and wellbore were clarified.The injection and production wells were selected to conduct the experiments,namely one injection well and two production wells,one injection well and one production well.The variation of several physical parameters in the production well was analyzed,such as flow rate,temperature,heat recovery rate and fluid recovery.The results show that under the combination of thermal shock and injection pressure,the fracture conductivity was enhanced,and the production temperature showed a downward trend.The larger the flow rate,the faster the decrease.When the local closed area of the fracture was gradually activated,new heat transfer areas were generated,resulting in a lower rate of increase or decrease in the mining temperature.The heat recovery rate was mainly controlled by the extraction flow rate and the temperature difference between injection and production fluid.As the conductivity of the leak-off channel increased,the fluid recovery of the production well rapidly decreased.The influence mechanisms of dominant channels and fluid leak-off on thermal recovery performance are different.The former limits the heat exchange area,while the latter affects the flow rate of the produced fluid.Both of them are important factors affecting the long-term and efficient development of hot dry rock.

A combined method using Lattice Boltzmann Method(LBM)and Finite Volume Method(FVM)to simulate geothermal reservoirs in Enhanced Geothermal System(EGS)

With the development of industrial activities,global warming has accelerated due to excessive emission of CO_(2).Enhanced Geothermal System(EGS)utilizes deep geothermal heat for power generation.Although porous medium theory is commonly employed to model geothermal reservoirs in EGS,Hot Dry Rock(HDR)presents a challenge as it consists of impermeable granite with zero porosity,potentially distorting the physical interpretation.To address this,the Lattice Boltzmann Method(LBM)is employed to simulate CO_(2)flow within geothermal reservoirs and the Finite Volume Method(FVM)to solve the energy conservation equation for temperature distribution.This combined method of LBM and FVM is imple-mented using MATLAB.The results showed that the Reynolds numbers(Re)of 3,000 and 8,000 lead to higher heat extraction rates from geothermal reservoirs.However,higher Re values may accelerate thermal breakthrough,posing challenges to EGS operation.Meanwhile,non-equilibrium of density in fractures becomes more pronounced during the system's life cycle,with non-Darcy's law becoming significant at Re values of 3,000 and 8,000.Density stratification due to buoyancy effects significantly impacts temperature distribution within geothermal reservoirs,with buoyancy effects at Re=100 under gravitational influence being noteworthy.Larger Re values(3,000 and 8,000)induce stronger forced convection,leading to more uniform density distribution.The addition of proppant negatively affects heat transfer performance in geothermal reservoirs,especially in single fractures.Practical engineering considerations should determine the quantity of proppant through detailed numerical simulations.

Dynamic analysis of heat extraction rate by supercritical carbon dioxide in fractured rock mass based on a thermal-hydraulic-mechanics coupled model

Heat production from geothermal reservoirs is a typical heat transfer process involving a cold working fluid contacting a hot rock formation.Compared to the thermal-physical characteristics of water,supercritical CO_(2)(scCO_(2))has a higher heat storage capacity over a wide temperature-pressure range and may be favored as a heat transfer fluid.Singularly characteristic of scCO_(2)-based heat extraction is that the hydraulic-thermal properties of the scCO_(2) vary dramatically and dynamically with the spatial pressure gradient during unsteady-state flow along fracture.This highly nonlinear behavior presents a challenge in the accurate estimation of heat extraction efficiency in scCO_(2)-based EGS.In this paper,a thermal-h ydraulic-mechanical(THM)coupled model is developed by considering deformation of the fractured reservoir,non-Darcy flow and the varying thermal-physical properties of scCO_(2).The proposed model is validated by matching the modeling temperature distribution with published data.The results show that during continuous injection of scCO_(2),the fracture first widens and then narrows,ultimately reopening over the long term.The sequential fracture deformation behaviors are in response to the combined impacts of mechanical compression and thermally-induced deformation.By controlling the injection parameters of the scCO_(2),it is found that the heat extraction rate is positively correlated to its pore pressure or mass flow rate.The heat extraction rate can be significantly enhanced,when the inlet temperature of scCO_(2) is below its critical temperature.As a result,the heat increment recovered per unit mass of scCO_(2) decreases as the hot rock is gradually cooled.Meanwhile,the heat increment recovered per unit mass of scCO_(2) decreases by increasing the inlet temperature of scCO_(2) or its mass flow rate,but increases as the outlet pressure rises.Furthermore,multi-linear regression indicates that controlling the inlet temperature of the scCO_(2) can significantly improve the thermodynamic efficiency of heat extraction.

A novel experimental setup with sand trunk for heat extraction of geothermal heat exchanger

A novel experimental setup was developed to study the heat extraction of geothermal heat exchanger(GHE)in different operational modes under adiabatic and isothermal boundaries.The experimental setup consists of a sand trunk,a tailored water chiller,a natural cold source unit,two water boxes containing hot water and cool water,and a data acquisition system.The experimental results indicate that the volume flow rate of the entering water is a main factor affecting the heat extraction;furthermore,the heat extraction value per meter pipe decreases gradually along the heat extraction pipe and increases with the increase of the incoming water volume flow rate.Therefore,this novel experimental setup may be helpful to further study the operation performance of GHE in different types of soil.

Geothermal extraction performance in fractured granite from Gonghe Basin,Qinghai province,China:Long-term injection and production experiment

The efficient exploitation of geothermal energy through enhanced geothermal systems(EGS)has been a relevant topic for hot dry rock(HDR)geothermal resources.When cryogenic fluid is injected into a thermal reservoir,improving heat exchange efficiency is key to achieving the optimal exploitation of HDR.In this paper,granite outcrops from Gonghe Basin were used as the testing sample.The natural fractures in the granite samples were relatively well developed.To simulate long-term injection and production from multi-wells in situ,physical ex-periments were performed in a newly-developed,in-house large-scale true triaxial experimental system.Geothermal extraction performance of an HDR was simulated for long-term injection and production operations.Simultaneously,the mode of one-injection and multiple-production wells was represented.In the paper,the ef-fects of the production-injection well spacing,the number of production wells and the injection rate on the production temperature and flow rate are discussed.The results show that,during long-term injection and pro-duction,there are two stages of production temperature variation,namely stabilization and attenuation.When the number of the production wells is increased,the heat extraction efficiency is accelerated.Moreover,competitive diversion of fluid among fractures occurred due to different conductivities.Furthermore,under different pro-duction modes,the production flow rate contributed differently to the heat extraction.Finally,the effect of the production-injection wells spacing on the heat exchange performance was analyzed;this is mainly reflected in the change of the effective heat exchange area between the rock and the injected fluid.The results emphasize the importance of designing an appropriate production mode and optimizing the injection-production parameters to ensure efficient HDR exploitation.

Optimization and Control of Extractive Distillation with Heat Integration for Separating Benzene/Cyclohexane Mixtures

In this work, the extractive distillation with heat integration process is extended to separate the pressure-insensitive benzene-cyclohexane azeotrope by using furfural as the entrainer. The optimal design of extractive distillation process is established to achieve minimum energy requirement using the multi-objective genetic algorithm, and the results show that energy saving for this heat integration process is 15.7%. Finally, the control design is performed to investigate the system's dynamic performance, and three control structures are studied. The pressure-compensated temperature control scheme is proposed based on the first two control structures, and the dynamic responses reveal that the feed disturbances in both flow rate and benzene composition can be mitigated well.

Comparative study on heat extraction performance of three enhanced geothermal systems

Enhanced geothermal systems(EGSs)in this study are classified as fracturing-EGS(F-EGS),pipe-EGS(P-EGS)and excavation-EGS(E-EGS)according to reservoir stimulation strategies.However,the heat extraction performances of three EGSs employing different stimulation strategies are not fully understood.Here,we define the region where the pore pressure increment calculated by a hydraulic fracturing process is higher than rock tensile strength as the stimulation region for establishing a more accurate F-EGS model,and then compare three geothermal systems to select a appropriate reservoir stimulation strategy.We find that the F-EGS model assuming an entire stimulated region significantly exaggerates the heat extraction results.The optimal conditions for P-EGS are low injection rates and short operation times,which is suiTablefor seasonal heating or multi-energy co-generation projects including a thermal recovery phase.Theoretically,E-EGS has better geothermal extraction performance than F-EGS based on existing model assumptions,but its construction feasibility and economics need further exploration.H2O is more suiTableas a heat exchange fluid in E-EGS than supercritical CO_(2).This study provides a reference for geothermal mining simulation and reservoir stimulation strategy selection.

Research advances in multi-field coupling model for geothermal reservoir heat extraction

As a kind of clean renewable energy,the production and utilization of geothermal resources can make a great contribution to optimizing the energy structure and energy conservation and emission reduction.The circulating heat extraction process of working fluid will disturb the equilibrium state of physical and chemical fields inside the reservoir,and involve the mutual coupling of heat transfer,flow,stress,and chemical reaction.Revealing the coupling mechanism of flow and heat transfer inside the reservoir during geothermal exploitation can provide important theoretical support for the efficient exploitation of geothermal resources.This paper reviews the research advances of the multi-field coupling model in the reservoir during geothermal production over the past 40 years.The thrust of this paper is on objective analysis and evaluation of the importance of each coupling process and its influence on reservoir heat extraction performance.Finally,we discuss the existing challenges and perspectives to promote the future development of the geothermal reservoir multi-field coupling model.An accurate understanding of the multi-field coupling mechanism,an efficient cross-scale modeling method,as well as the accurate characterization of reservoir fracture morphology,are crucial for the multi-field coupling model of geothermal production.

Optimizing environmental insulation thickness of buildings with CHP-based district heating system based on amount of energy and energy grade

The increase of insulation thickness(IT)results in the decrease of the heat demand and heat medium temperature.A mathematical model on the optimum environmental insulation thickness(OEIT)for minimizing the annual total environmental impact was established based on the amount of energy and energy grade reduction.Besides,a case study was conducted based on a residential community with a combined heat and power(CHP)-based district heating system(DHS)in Tianjin,China.Moreover,the effect of IT on heat demand,heat medium temperature,exhaust heat,extracted heat,coal consumption,carbon dioxide(CO_(2))emissions and sulfur dioxide(SO_(2))emissions as well as the effect of three types of insulation materials(i.e.,expanded polystyrene,rock wool and glass wool)on the OEIT and minimum annual total environmental impact were studied.The results reveal that the optimization model can be used to determine the OEIT.When the OEIT of expanded polystyrene,rock wool and glass wool is used,the annual total environmental impact can be reduced by 84.563%,83.211%,and 86.104%,respectively.It can be found that glass wool is more beneficial to the environment compared with expanded polystyrene and rock wool.

Water Storage of Water-Based Enhanced Geothermal System Based on a 3D Thermal-Hydrologic-Mechanical Model

The thermal-hydrologic-mechanical(THM)coupled processes in water-based enhanced geothermal system(EGS)greatly influence the heat extraction performance of EGS.Many THM models have been proposed,however,there is a lack of detailed analysis of water storage,which is caused by the increments of reservoir porosity and water density,and the influence of water storage on the heat extraction performance needs to be uncovered.In this paper,a 3D THM model is established to simulate the water storage amount and heat extraction rate for a water-based EGS.The 3D THM model is verified against an analytical solution.Then,the influences of water storage are investigated,and comparisons between the THM and thermal-hydrologic(TH)processes are made for different initial reservoir porosities.The results show that the increment of reservoir porosity has a larger influence on water storage than that of water density.If ignoring water storage,the injection flow rate would be underestimated,while the production flow rate and heat extraction rate would be overestimated,and the reservoir would be cooled a little slower.Compared with the TH processes,the THM processes show larger cumulative water storage amount,higher steady-state heat extraction rate and higher cooling rate of reservoir,indicating that mechanical process has important influences on EGS performances.For higher initial reservoir porosity,the cumulative water storage amount is larger.It can be inferred that the water storage amount is related to the cooling rate of reservoir.The results of this paper show that water storage has a certain influence on the heat extraction rate,and that the mechanical process and initial reservoir porosity have important effects on the water storage amount,which should be simulated based on a THM model.