Trajectory synchronization of multi-cylinder electrohydraulic lift system with huge load

A kind of four degree-of-freedom （DOF） electrohydraulic lift system is studied in this pa- per, after analyzing the motion characteristics and the mathematic model of the hydraulic cylinders, a cross-coupled synchronization method with load force and synchronization error feedback had been proposed to solve the synchronization problem encountered when realizing the needed roll and pitch attitude of the lift system. In this paper, mathematic model of asymmetric hydraulic cylinder was es- tablished and the lift system had been simplified to a dual-cylinder system. By incorporating the load force and the displacement of each cylinder, a cross-coupled synchronized control method was pro- posed to fit each cylinder＇ s tracking performance and multi-cylinder＇ s trajectory synchronization property. The proposed method not only solved the synchronization problem when multi-cylinder had a same trajectory, but also could fit the coordinated synchronization need when different trajectories of multi-cylinder were desired. Simulations and experiments on a four DOF electrohydraulic lift sys- tem with load of 100 tons verified the effectiveness of the proposed method.

Application of Simple Adaptive Control to Water Hydraulic Servo Cylinder System

Although conventional model reference adaptive control （MRAC） achieves good tracking performance for cylinder control, the controller structure is much more complicated and has less robustness to disturbance in real applications. This paper discusses the use of simple adaptive control （SAC） for positioning a water hydraulic servo cylinder system. Compared with MRAC, SAC has a simpler and lower order structure, i.e., higher feasibility. The control performance of SAC is examined and evaluated on a water hydraulic servo cylinder system. With the recent increased concerns over global environmental problems, the water hydraulic technique using pure tap water as a pressure medium has become a new drive source comparable to electric, oil hydraulic, and pneumatic drive systems. This technique is also preferred because of its high power density, high safety against fire hazards in production plants, and easy availability. However, the main problems for precise control in a water hydraulic system are steady state errors and overshoot due to its large friction torque and considerable leakage flow. MRAC has been already applied to compensate for these effects, and better control performances have been obtained. However, there have been no reports on the application of SAC for water hydraulics. To make clear the merits of SAC, the tracking control performance and robustness are discussed based on experimental results. SAC is confirmed to give better tracking performance compared with PI control, and a control precision comparable to MRAC （within 10 μm of the reference position） and higher robustness to parameter change, despite the simple controller. The research results ensure a wider application of simple adaptive control in real mechanical systems.

Safety estimation of high-pressure hydraulic cylinder using FSI method

Hydraulic cylinder is a primary component of the hydraulic valve systems.The numerical study of hydraulic cylinder to evaluate the stress analysis,the life assessment and the performance of operation characteristics in hydraulic cylinder were described.The calculation of safety factor,fatigue life,piston chamber pressure,rod chamber pressure and the change of velocity of piston with flow time after the beginning of hydraulic cylinder were incorporated.Numerical analysis was performed using the commercial CFD code,ANSYS with unsteady,dynamic mesh model,two-way FSI(fluid-structure interaction)method and k-εturbulent model.The internal pressure in hydraulic cylinder through stress analysis show higher than those of the yield strength.

Hydraulic Self Servo Swing Cylinder Structure Optimization and Dynamic Characteristics Analysis Based on Genetic Algorithm

The dynamic characteristics of hydraulic self servo swing cylinder were analyzed according to the hydraulic system natural frequency formula. Based on that,a method of the hydraulic self servo swing cylinder structure optimization based on genetic algorithm was proposed in this paper. By analyzing the four parameters that affect the dynamic characteristics, we had to optimize the structure to obtain as larger the Dm( displacement) as possible under the condition with the purpose of improving the dynamic characteristics of hydraulic self servo swing cylinder. So three state equations were established in this paper. The paper analyzed the effect of the four parameters in hydraulic self servo swing cylinder natural frequency equation and used the genetic algorithm to obtain the optimal solution of structure parameters. The model was simulated by substituting the parameters and initial value to the simulink model. Simulation results show that: using self servo hydraulic swing cylinder natural frequency equation to study its dynamic response characteristics is very effective.Compared with no optimization,the overall system dynamic response speed is significantly improved.

Stress and Deformation Analysis of Cylinder-Crown Integrated Hydraulic Press with Large Capacity

Cylinder-crown integrated hydraulic press( CCIHP) is a new press structure. The hemispherical hydraulic cylinder also functions as a main portion of crown,which has lower weight and higher section modulus compared with the conventional hydraulic cylinder and press crown. In order to design cylinder-crown integrated hydraulic press with large capacity, the theoretical design of hemispherical hydraulic cylinder was first proposed,and the structural parameters of 150 MN CCIHP were listed. Then the simulation was carried out to analyze the stress and deformation of CCIHP,and weight comparison was conducted between CCIHP and conventional press. It is shown that the weight reduction for hydraulic cylinder and press crown is about 20% compared with that for conventional press,and the stress and deformation are both within the range of constraints including strength and stiffness conditions. It is possible to manufacture cylinder-crown integrated hydraulic press with large capacity.

Analysis and Optimization of Inside-Cushion Structure in High-Speed Hydraulic Cylinders

An inside-cushion structure with sidestep and taper-shaped plungers is studied to address the problems of high impact and vibration in high-speed hydraulic cylinders.First,the three stages of cushion processes are discussed according to the varying flow area as the piston moves.Then,to establish a precise mathematical model,the states of the flow field are estimated in terms of the Reynolds number.Accordingly,the simulation model parameterized against measured data is developed and verified by experiment.Last,the average velocity,peak cushion pressure,and terminal velocity are defined to evaluate cushion performance.According to these optimized objectives,the non-linear programming by quadratic Lagrange(NLPQL)algorithm is applied to optimize the structure parameters.The optimization results indicate that the peak cushion pressure is reduced by 28%and terminal velocity is reduced by 21%without reduction of average velocity.

Proposal of a Component to Restrict Dust from Entering an Oil Hydraulic System through an Oil Hydraulic Cylinder

This research proposes a component to restrict dust from entering an oil hydraulic system through the rod-seal clearance of an oil hydraulic cylinder.The oil hydraulic cylinder as one of main parts of the hydraulic system,controls position of load by reciprocation.For example,on construction machines such as excavators and graders,the cylinder controls position of folk lift,crane and bucket.However,during operation,dust enters the cylinder,wears seals,causes fluid degradation and affects lubrication of valves,pumps and other parts of hydraulic system.This increases breakdown rate of cylinder and entire system.Thus,it seems necessary to reduce on intrusion of dust into the system via the hydraulic cylinder.In this research,we made an experimental apparatus to simulate intrusion of the dust into system.Results proved that the apparatus is a suitable simulator to realize the intrusion.The proposed component to restrict dust from entering cylinder was fabricated and its performance tested when inserted with various elastic rings.The component gave tremendous results when inserted with O-ring seal and a plastic nylon washer,and can be retrofitted on new and old hydraulic cylinders.It is an appropriate technology especially in developing countries where dust is still a major concern.

Technological Analysis on Improvement of Hydraulic Cylinder Structure

Hydraulic equipment is widely applied in the fields of engineering construction, manufacture and mining. As the core component of hydraulic equipment, hydraulic cylinder will directly affect the whole operation of hydraulic equipment. This paper will analyze the improvement of hydraulic cylinder structure and expect to enhance its reliability and stability.

Fuzzy Logic Based Approach in an Enterprise Resource Planning System for Hydraulic Cylinders Assembly

Trends in modern industry show a tendency towards demassovization of production as a response to the customers＇ specific needs for unique and personalized products. This provokes significant changes in the processes of manufacturing, assembly, and testing The cost of such a type of production can be reduced by employing highly productive reconfigurable equipment with proper software to enable optimization. This paper presents a decision support extension for directing of hydraulic cylinders to assembly-testing lines using fuzzy logic in the Enterprise Resource Planning system of a small size production in a factory in Bulgaria. Different assembly-testing lines are flexibly assigned to the specific cylinder＇s parameters by the developed fuzzy system on the basis of the overlapping of parameters in the hydraulic cylinders classification. The final decision on the line assigned in case of alternatives is made through accounting for the minimal cylinder delay time. The effectiveness of the approach is assessed by simulation. It leads to an increase of the efficiency of the assembly-testing flow lines, a reduction of the time needed for hydraulic cylinders assembling and testing and balanced loading of the modules.

Analysis on Static Pressure Bearing Seal Characteristics of Guide Sleeve of Electro-hydraulic Servo Cylinder

As a typical bionic walking robot, hydraulic quadruped robot has attracted much attention because of its high mobility, strong load capacity and steady motion. The electro-hydraulic servo cylinder, as its power actuator, requires low friction, good lateral load resistance and high speed motion. The electro-hydraulic servo cylinder hydrostatic bearing seal guide sleeve is taken as the research object in this paper. By using Fluent software to analyze and contrast the film characteristics of rectangular and I-shaped oil chamber of hydrostatic bearing seal guide sleeve, the relationship between piston rod moving speed, eccentricity, oil film carrying capacity, friction force and leakage volume, as well as the relationship between oil feed flow and oil film bearing capacity, friction force, inlet pressure and leakage volume were analyzed. This study provides a theoretical basis for optimizing the static pressure bearing seal parameters.

Study on Oil Cavity Number of Hydrostatic Guide Sleeve of Electro-hydraulic Servo Cylinder

The electro-hydraulic servo drive hydraulic cylinder has many unique advantages, such as fast response, high load stiffness, high control power, strong anti-eccentric load ability and so on, so it has been widely used in industrial control. Based on the guide sleeve of hydrostatic seal of hydraulic cylinder, the reasonable number of oil chamber of guide sleeve is studied in this paper. ICEM CFD software and FLUENT simulation software are used to calculate and analyze the number of different oil chambers of guide sleeve of hydrostatic seal. The temperature field of piston rod with different moving speed, different initial pressure of oil chamber and oil film under different number of oil chambers is analyzed. The relationship between the pressure field and temperature field provides a better basis for optimizing the design of hydrostatic guide sleeve and helps to improve the servo drive cylinder.

Reliability Analysis of Heavy-Duty CNC Machine Hydraulic System Based on Fuzzy Goal Oriented Method

There is a common sense that heavy-duty CNC machine strongly depends on its foundation and can be easily affected by many factors.Hydraulic system,the most important part in CNC machine,is a complex and multi-loop system.In order to make up for the shortcomings of traditional fault tree analysis method and traditional GO method,the most effective method named fuzzy GO method is proposed to analyze the reliability of hydraulic system.And then some ideas are provided for system reliability assessment,fault diagnosis and maintenance by qualitative and quantitative analysis.

基于SimHydraulics的电液伺服系统实物仿真

针对一个采用阀控对称缸的电液伺服系统进行了SimHydraulics实物仿真,根据仿真结果辨识出系统的数学模型,通过与机理建模和Simulink模型仿真的结果相对比进行了验证。总结了综合应用SimHydraulics与Simulink的新仿真方法,该方法使得电液伺服系统的设计和控制方案的选择可以同步进行,提高了系统设计的效率和准确性。

基于Simulink/SimHydraulics的阀控二级液压缸系统的建模与仿真

介绍SimHydraulics软件的特点和二级双作用液压缸的基本工作原理,利用Simulink/SimHydraulics软件,采用两个单级双作用液压缸级联的方式建立二级双作用液压缸的模型,对阀控二级液压缸位置控制系统进行仿真分析。仿真结果表明了模型的有效性,为多级液压缸的建模提供了方法。

Excavator Energy-saving Efficiency Based on Diesel Engine Cylinder Deactivation Technology

The hydraulic excavator energy-saving research mainly embodies the following three measures： to improve the performance of diesel engine and hydraulic component, to improve the hydraulic system, and to improve the power matching of diesel-hydraulic system-actuator. Although the above measures have certain energy-saving effect, but because the hydraulic excavator load changes frequently and fluctuates dramatically, so the diesel engine often works in high-speed and light load condition, and the fuel consumption is higher. Therefore, in order to improve the economy of diesel engine in light load, and reduce the fuel consumption of hydraulic excavator, energy management concept is proposed based on diesel engine cylinder deactivation technology. By comparing the universal characteristic under diesel normal and deactivated cylinder condition, the mechanism that fuel consumption can be reduced significantly by adopting cylinder deactivation technology under part of loads condition can be clarified. The simulation models for hydraulic system and diesel engine are established by using AMESim software, and fuel combustion consumption by using cylinder-deactivation-technology is studied through digital simulation approach. In this way, the zone of cylinder deactivation is specified. The testing system for the excavator with this technology is set up based on simulated results, and the results show that the diesel engine can still work at high efficiency with part of loads after adopting this technology; fuel consumption is dropped down to 11% and 13% under economic and heavy-load mode respectively under the condition of driving requirements. The research provides references to the energy-saving study of the hydraulic excavators.

Nonlinear Mathematical Modeling and Sensitivity Analysis of Hydraulic Drive Unit

The previous sensitivity analysis researches are not accurate enough and also have the limited reference value, because those mathematical models are relatively simple and the change of the load and the initial displacement changes of the piston are ignored, even experiment verification is not conducted. Therefore, in view of deficiencies above, a nonlinear mathematical model is established in this paper, including dynamic characteristics of servo valve, nonlinear characteristics of pressure-flow, initial displacement of servo cylinder piston and friction nonlinearity. The transfer function block diagram is built for the hydraulic drive unit closed loop position control, as well as the state equations. Through deriving the time-varying coefficient items matrix and time-varying free items matrix of sensitivity equations respectively, the expression of sensitivity equations based on the nonlinear mathematical model are obtained. According to structure parameters of hydraulic drive unit, working parameters, fluid transmission characteristics and measured friction-velocity curves, the simulation analysis of hydraulic drive unit is completed on the MATLAB/Simulink simulation platform with the displacement step 2 mm, 5 mm and 10 mm, respectively. The simulation results indicate that the developed nonlinear mathematical model is sufficient by comparing the characteristic curves of experimental step response and simulation step response under different constant load. Then, the sensitivity function time-history curves of seventeen parameters are obtained, basing on each state vector time-history curve of step response characteristic. The maximum value of displacement variation percentage and the sum of displacement variation absolute values in the sampling time are both taken as sensitivity indexes. The sensitivity indexes values above are calculated and shown visually in histograms under different working conditions, and change rules are analyzed. Then the sensitivity indexes values of four measurable parameters, such as supply pressure, proportional gain, initial position of servo cylinder piston and load force, are verified experimentally on test platform of hydraulic drive unit, and the experimental research shows that the sensitivity analysis results obtained through simulation are approximate to the test results. This research indicates each parameter sensitivity characteristics of hydraulic drive unit, the performance-affected main parameters and secondary parameters are got under different working conditions, which will provide the theoretical foundation for the control compensation and structure optimization of hydraulic drive unit.

Full Power Hydraulic Brake System Based on Double Pipelines for Heavy Vehicles

The hydraulic caliper disc brake system with air-over-oil is widely adopted at present for heavy vehicles,which makes use of air pressure system propelling the hydraulic pressure system acting on friction plates divided and combined for braking.There are some disadvantages such as pneumatic components failure,dust polluted and produce lots of heat in hydraulic caliper disc brake system.Moreover,considering the demands of the high speed,heavy weight,heavy load and fast brake of heavy vehicles,the full power hydraulic brake system based on double pipelines for heavy vehicles is designed and analyzed in this paper.The scheme of the full power hydraulic brake system,in which the triloculare cylinder is controlled by dual brake valve,is adopted in the brake system.The full power hydraulic brake system can accomplish steering brake,parking brake and emergent brake for heavy vehicles.Furthermore,electronic control system that is responsible for coordinating the work of hydraulic decelerator and hydraulic brake system is developed for different speed brakes.Based on the analysis of the influence of composed unit and connecting pipeline on braking performance,the nonlinear mathematic model is established for the full power hydraulic brake system.The braking completion time and braking pressure in braking performance of the double-pipeline steering brake and parking brake are discussed by means of simulation experiments based on Matlab/Simulink,and the simulation results prove that the braking performance of steering brake and parking brake meets the designing requirement of the full power hydraulic brake system.Moreover,the test-bed experiments of the brake system for heavy vehicles are carried out.The experimental data prove that the braking performance achieves the goal of the design,and that the full power hydraulic brake system based on double pipelines can effectively enhance braking performance,ensure braking reliability and security for heavy vehicles.

Dynamics of luffing motion of a hydraulically driven shell manipulator with revolute clearance joints

In this study,a modeling method for investigating the dynamic characteristics of a hydraulically driven shell manipulator with revolute clearance joints is presented.This model accounts for the effect of the clearance,the flexibility of the rotating beam,and the coupled dynamic characteristics of the hydraulic cylinder.A modified contact force model was developed to simulate the physical properties of realistic revolute joints with small clearances,heavy loads,and variable contact stiffnesses and damping coefficients with variations of the indentations.Considering the strong coupling relationship between the hydraulic cylinder and the flexible beam,a system equation of motion combining the state variables of the hydraulic cylinder and mechanical system was established.The complex nonlinear friction force of the hydraulic cylinder motion was constructed using a modified Lu Gre model,and the parameters of the friction model were identified using intelligent identification algorithms.Moreover,a test system for the shell manipulator was established to achieve experimental validation.Finally,the effects of the clearance size and the stiffness of the cylinder support on the dynamic response were investigated.

Waveforms analysis and optimization of new electro-hydraulic excitation technology

A new electro-hydraulic exciter that consists of rotary valve and micro-displacement double-functioned hydraulic cylinder was proposed to realize different kinds of waveforms.Calculated fluid dynamics(CFD) simulation of rotary valve orifice reveals that orifice exists the two-throttle phenomenon.According to the finding,the revised flow area model was established.Vibration waveforms analysis was carried out by means of mathematic model and the related experiments were validated.Furthermore,as a new analysis indicator,saturation percentage was introduced first.The experimental results indicate that the revised flow area model is more accurate compared to the original one,and vibration waveforms can be optimized through suitable spool parameters and the revised cylinder structure.