A method is presented to extrapolate a time series of wave data to extreme wave heights. The 15-year time series of deepwater wave data collected for 34 min every hour from 1988 to 2002 in the South Pacific Ocean, Aus...A method is presented to extrapolate a time series of wave data to extreme wave heights. The 15-year time series of deepwater wave data collected for 34 min every hour from 1988 to 2002 in the South Pacific Ocean, Australia, is analyzed to generate a set of storm peak wave heights by use of the Peaks-Over-Threshold method. The probability distribution is calculated by grouping the observod storm peak wave heights into a number of wave height classes and assigning a probability to each wave height class. The observed probability distribution is then fitted to eight different probability distribution functions and found to be fitted best by the Weibull distribution （a = 1.17）, nearly best by the FT-Ⅰ, quite well by the exponential, and poorly by the lognormal function based on the criterion of the sum of squares of the errors, SSE （H）. The effect of the threshold wave height on the estimated extreme wave height is also studied and is found insignificant in this study. The 95 % prediction intervals of the best-fit FT-Ⅰ , exponential and Weibull functions are also derived.展开更多
Building detection in very high resolution (VHR) images is crucial for mapping and analysing urban environments. Since buildings are elevated objects, elevation data need to be integrated with images for reliable dete...Building detection in very high resolution (VHR) images is crucial for mapping and analysing urban environments. Since buildings are elevated objects, elevation data need to be integrated with images for reliable detection. This process requires two critical steps: optical-elevation data co-registration and aboveground elevation calculation. These two steps are still challenging to some extent. Therefore, this paper introduces optical-elevation data co-registration and normalization techniques for generating a dataset that facilitates elevation-based building detection. For achieving accurate co-registration, a dense set of stereo-based elevations is generated and co-registered to their relevant image based on their corresponding image locations. To normalize these co-registered elevations, the bare-earth elevations are detected based on classification information of some terrain-level features after achieving the image co-registration. The developed method was executed and validated. After implementation, 80% overall-quality of detection result was achieved with 94% correct detection. Together, the developed techniques successfully facilitate the incorporation of stereo-based elevations for detecting buildings in VHR remote sensing images.展开更多
With their widespread utilization, cut-to-length harvesters have become a major source of ‘‘big data’’ for forest management as they constantly capture, and provide a daily flow of, information on log production a...With their widespread utilization, cut-to-length harvesters have become a major source of ‘‘big data’’ for forest management as they constantly capture, and provide a daily flow of, information on log production and assortment over large operational areas. Harvester data afford the calculation of the total log length between the stump and the last cut but not the total height of trees. They also contain the length and end diameters of individual logs but not always the diameter at breast height overbark（DBHOB） of harvested stems largely because of time lapse, operating and processing issues and other system deficiencies. Even when DBHOB is extracted from harvester data, errors and/or bias of the machine measurements due to the variation in the stump height of harvested stems from that specified for the harvester head prior to harvesting and diameter measurement errors may need to be corrected. This study developed（1） a system of equations for estimating DBHOB of trees from diameter overbark（DOB） measured by a harvester head at any height up to 3 m above ground level and（2） an equation to predict the total height of harvested stems in P. radiata plantations from harvester data. To generate the data required for this purpose, cut-to-length simulations of more than 3000 trees with detailed taper measurements were carried out in the computer using the cutting patterns extracted from the harvester data and stump height survey data from clearfall operations. The equation predicted total tree height from DBHOB, total log length and the small end diameter of the top log. Prediction accuracy for total tree height was evaluated both globally over the entire data space and locally within partitioned subspaces through benchmarking statistics. These statistics were better than that of the conventional height-diameter equations for P. radiata found in the literature, even when they incorporated stand age and the average height and diameter of dominant trees in the stand as predictors. So this equation when used with harvester data would outperform the conventional equations in tree height prediction. Tree and stand reconstructions of the harvested forest is the necessary first step to provide the essential link of harvester data to conventional inventory, remote sensing imagery and Li DAR data. The equations developed in this study will provide such a linkage for the most effective combined use of harvester data in predicting the attributes of individual trees, stands and forests, and product recovery for the management and planning of P. radiata plantations in New South Wales, Australia.展开更多
文摘A method is presented to extrapolate a time series of wave data to extreme wave heights. The 15-year time series of deepwater wave data collected for 34 min every hour from 1988 to 2002 in the South Pacific Ocean, Australia, is analyzed to generate a set of storm peak wave heights by use of the Peaks-Over-Threshold method. The probability distribution is calculated by grouping the observod storm peak wave heights into a number of wave height classes and assigning a probability to each wave height class. The observed probability distribution is then fitted to eight different probability distribution functions and found to be fitted best by the Weibull distribution （a = 1.17）, nearly best by the FT-Ⅰ, quite well by the exponential, and poorly by the lognormal function based on the criterion of the sum of squares of the errors, SSE （H）. The effect of the threshold wave height on the estimated extreme wave height is also studied and is found insignificant in this study. The 95 % prediction intervals of the best-fit FT-Ⅰ , exponential and Weibull functions are also derived.
文摘Building detection in very high resolution (VHR) images is crucial for mapping and analysing urban environments. Since buildings are elevated objects, elevation data need to be integrated with images for reliable detection. This process requires two critical steps: optical-elevation data co-registration and aboveground elevation calculation. These two steps are still challenging to some extent. Therefore, this paper introduces optical-elevation data co-registration and normalization techniques for generating a dataset that facilitates elevation-based building detection. For achieving accurate co-registration, a dense set of stereo-based elevations is generated and co-registered to their relevant image based on their corresponding image locations. To normalize these co-registered elevations, the bare-earth elevations are detected based on classification information of some terrain-level features after achieving the image co-registration. The developed method was executed and validated. After implementation, 80% overall-quality of detection result was achieved with 94% correct detection. Together, the developed techniques successfully facilitate the incorporation of stereo-based elevations for detecting buildings in VHR remote sensing images.
基金supported by the Forestry Corporation of New South Wales
文摘With their widespread utilization, cut-to-length harvesters have become a major source of ‘‘big data’’ for forest management as they constantly capture, and provide a daily flow of, information on log production and assortment over large operational areas. Harvester data afford the calculation of the total log length between the stump and the last cut but not the total height of trees. They also contain the length and end diameters of individual logs but not always the diameter at breast height overbark（DBHOB） of harvested stems largely because of time lapse, operating and processing issues and other system deficiencies. Even when DBHOB is extracted from harvester data, errors and/or bias of the machine measurements due to the variation in the stump height of harvested stems from that specified for the harvester head prior to harvesting and diameter measurement errors may need to be corrected. This study developed（1） a system of equations for estimating DBHOB of trees from diameter overbark（DOB） measured by a harvester head at any height up to 3 m above ground level and（2） an equation to predict the total height of harvested stems in P. radiata plantations from harvester data. To generate the data required for this purpose, cut-to-length simulations of more than 3000 trees with detailed taper measurements were carried out in the computer using the cutting patterns extracted from the harvester data and stump height survey data from clearfall operations. The equation predicted total tree height from DBHOB, total log length and the small end diameter of the top log. Prediction accuracy for total tree height was evaluated both globally over the entire data space and locally within partitioned subspaces through benchmarking statistics. These statistics were better than that of the conventional height-diameter equations for P. radiata found in the literature, even when they incorporated stand age and the average height and diameter of dominant trees in the stand as predictors. So this equation when used with harvester data would outperform the conventional equations in tree height prediction. Tree and stand reconstructions of the harvested forest is the necessary first step to provide the essential link of harvester data to conventional inventory, remote sensing imagery and Li DAR data. The equations developed in this study will provide such a linkage for the most effective combined use of harvester data in predicting the attributes of individual trees, stands and forests, and product recovery for the management and planning of P. radiata plantations in New South Wales, Australia.
