Omnidirectional dynamic space parameters of high-speed rotating helicopter blades are precise 3 D vector description of the blades. In particular, the elevation difference is directly related to the aerodynamic perfor...Omnidirectional dynamic space parameters of high-speed rotating helicopter blades are precise 3 D vector description of the blades. In particular, the elevation difference is directly related to the aerodynamic performance and maneuverability of the helicopter. The state of the art detection techniques based on optics and common vision have several drawbacks, such as high demands on devices but poor extensibility, limited measurement range and fixed measurement position. In this paper, a novel approach of helicopter blades running elevation measurement is proposed based on omnidirectional vision. With the advantages of panoramic visual imaging integration, 360° field of view and rotation in-variance, high-resolution images of all rotating blades positions are obtained at one time. By studying the non-linear calibration and calculation model of omnidirectional vision system, aiming at solving the problem of inaccurate visual space mapping model,the omnidirectional and full-scale measurement of the elevation difference are finalized. Experiments are carried out on our multifunctional simulation blades test system and the practical blades test tower, respectively. The experimental results demonstrate the effectiveness of the proposed method and show that the proposed method can considerably reduce the complexity of measurement.展开更多
An analytical model of hydraulic damper was presented in forward flight accounting for pitch/flap/lag kinematic coupling and its nonlinear force-velocity curve. The fourth order Runge-Kutta was applied to calculate th...An analytical model of hydraulic damper was presented in forward flight accounting for pitch/flap/lag kinematic coupling and its nonlinear force-velocity curve. The fourth order Runge-Kutta was applied to calculate the damper axial velocity in time domain. Fourier series based moving block analysis was applied to calculate equivalent linear damping in terms of transient responses of damper axial velocity. Results indicate that equivalent linear damping will be significantly reduced if pitch/flap/lag kinematic coupling introduced for notional model and flight conditions.展开更多
This study describes an integrated framework in which basic aerospace engineering aspects(performance, aerodynamics, and structure) and practical aspects(configuration visualization and manufacturing) are coupled and ...This study describes an integrated framework in which basic aerospace engineering aspects(performance, aerodynamics, and structure) and practical aspects(configuration visualization and manufacturing) are coupled and considered in one fully automated design optimization of rotor blades. A number of codes are developed to robustly perform estimation of helicopter configuration from sizing, performance analysis, trim analysis, to rotor blades configuration representation. These codes are then integrated with a two-dimensional airfoil analysis tool to fully design rotor blades configuration including rotor planform and airfoil shape for optimal aerodynamics in both hover and forward flights. A modular structure design methodology is developed for realistic composite rotor blades with a sophisticated cross-sectional geometry. A D-spar cross-sectional structure is chosen as a baseline. The framework is able to analyze all realistic inner configurations including thicknesses of D-spar, skin, web, number and ply angles of layers of each composite part,and materials. A number of codes and commercial software(ANSYS, Gridgen, VABS, Pre VABS,etc.) are implemented to automate the structural analysis from aerodynamic data processing to sectional properties and stress analysis. An integrated model for manufacturing cost estimation ofcomposite rotor blades developed at the Aerodynamic Analysis and Design Laboratory(AADL),Aerospace Information Engineering Department, Konkuk University is integrated into the framework to provide a rapid and dynamic feedback to configuration design. The integration of three modules has constructed a framework where the size of a helicopter, aerodynamic performance analysis, structure analysis, and manufacturing cost estimation could be quickly investigated. All aspects of a rotor blade including planform, airfoil shape, and inner structure are considered in a multidisciplinary design optimization without an exception of critical configuration.展开更多
基金supported in part by the National Natural Science Foundation of China(Nos.61673129,51674109)Natural Science Foundation of Heilongjiang Province of China(No.F201414)+2 种基金Harbin Application Research Funds(No.2016RQQXJ096)Fundamental Research Funds for the Central Universities(No.HEUCF041703)State Key Laboratory of Air Traffic Management System and Technology(No.SKLATM201708)
文摘Omnidirectional dynamic space parameters of high-speed rotating helicopter blades are precise 3 D vector description of the blades. In particular, the elevation difference is directly related to the aerodynamic performance and maneuverability of the helicopter. The state of the art detection techniques based on optics and common vision have several drawbacks, such as high demands on devices but poor extensibility, limited measurement range and fixed measurement position. In this paper, a novel approach of helicopter blades running elevation measurement is proposed based on omnidirectional vision. With the advantages of panoramic visual imaging integration, 360° field of view and rotation in-variance, high-resolution images of all rotating blades positions are obtained at one time. By studying the non-linear calibration and calculation model of omnidirectional vision system, aiming at solving the problem of inaccurate visual space mapping model,the omnidirectional and full-scale measurement of the elevation difference are finalized. Experiments are carried out on our multifunctional simulation blades test system and the practical blades test tower, respectively. The experimental results demonstrate the effectiveness of the proposed method and show that the proposed method can considerably reduce the complexity of measurement.
文摘An analytical model of hydraulic damper was presented in forward flight accounting for pitch/flap/lag kinematic coupling and its nonlinear force-velocity curve. The fourth order Runge-Kutta was applied to calculate the damper axial velocity in time domain. Fourier series based moving block analysis was applied to calculate equivalent linear damping in terms of transient responses of damper axial velocity. Results indicate that equivalent linear damping will be significantly reduced if pitch/flap/lag kinematic coupling introduced for notional model and flight conditions.
基金supported by the National Foundation for Science and Technology Development (NAFOSTED) of Vietnam (No. 107.04-2012.25)
文摘This study describes an integrated framework in which basic aerospace engineering aspects(performance, aerodynamics, and structure) and practical aspects(configuration visualization and manufacturing) are coupled and considered in one fully automated design optimization of rotor blades. A number of codes are developed to robustly perform estimation of helicopter configuration from sizing, performance analysis, trim analysis, to rotor blades configuration representation. These codes are then integrated with a two-dimensional airfoil analysis tool to fully design rotor blades configuration including rotor planform and airfoil shape for optimal aerodynamics in both hover and forward flights. A modular structure design methodology is developed for realistic composite rotor blades with a sophisticated cross-sectional geometry. A D-spar cross-sectional structure is chosen as a baseline. The framework is able to analyze all realistic inner configurations including thicknesses of D-spar, skin, web, number and ply angles of layers of each composite part,and materials. A number of codes and commercial software(ANSYS, Gridgen, VABS, Pre VABS,etc.) are implemented to automate the structural analysis from aerodynamic data processing to sectional properties and stress analysis. An integrated model for manufacturing cost estimation ofcomposite rotor blades developed at the Aerodynamic Analysis and Design Laboratory(AADL),Aerospace Information Engineering Department, Konkuk University is integrated into the framework to provide a rapid and dynamic feedback to configuration design. The integration of three modules has constructed a framework where the size of a helicopter, aerodynamic performance analysis, structure analysis, and manufacturing cost estimation could be quickly investigated. All aspects of a rotor blade including planform, airfoil shape, and inner structure are considered in a multidisciplinary design optimization without an exception of critical configuration.