Ultrasonic/O3 combined process was employed to pretreat heterocyclic pesticide wastewater for increasing biodegradability and reducing biological toxicity. Influences of ultrasonic frequency, ultrasonic power, probe d...Ultrasonic/O3 combined process was employed to pretreat heterocyclic pesticide wastewater for increasing biodegradability and reducing biological toxicity. Influences of ultrasonic frequency, ultrasonic power, probe diameter, initial pH and 03 dosage on the COD removal were studied. The results showed that the ultrasonic/O3 process significantly improved the biodegradability and reduced the biological toxicity of the wastewater. The ratio of BODs/COD was increased from 0.03 to 0.55 and the EC50 increased from 11% to 52% under ultrasonic/O3 treatment. Low ultrasonic frequency brought better COD removal. Initial pH was found to have a high influence on the COD removal and alkaline conditions were more favorable. The influences of ultrasonic power and probe diameter were small. With an increase in O3 dosage, COD removal was effectively improved. The optimal operational parameters for the combined process on COD removal were ultrasonic frequency 20 kHz, initial pH 9.00, ultrasonic power 300 W and dosage of O3 454.8 mg/（L.min）, under which the efficiency of COD removal reached 67.2%.展开更多
基金supported by the National Water Pollution Control and Management Technology Major Project(No. 2008ZX07316-003)
文摘Ultrasonic/O3 combined process was employed to pretreat heterocyclic pesticide wastewater for increasing biodegradability and reducing biological toxicity. Influences of ultrasonic frequency, ultrasonic power, probe diameter, initial pH and 03 dosage on the COD removal were studied. The results showed that the ultrasonic/O3 process significantly improved the biodegradability and reduced the biological toxicity of the wastewater. The ratio of BODs/COD was increased from 0.03 to 0.55 and the EC50 increased from 11% to 52% under ultrasonic/O3 treatment. Low ultrasonic frequency brought better COD removal. Initial pH was found to have a high influence on the COD removal and alkaline conditions were more favorable. The influences of ultrasonic power and probe diameter were small. With an increase in O3 dosage, COD removal was effectively improved. The optimal operational parameters for the combined process on COD removal were ultrasonic frequency 20 kHz, initial pH 9.00, ultrasonic power 300 W and dosage of O3 454.8 mg/（L.min）, under which the efficiency of COD removal reached 67.2%.
