Carbon-doped CuFe_(2)O_(4) with C-O-M channels for enhanced Fenton-like degradation of tetracycline hydrochloride: From construction to mechanism

Carbon-doped copper ferrite(C–CuFe_(2)O_(4))was synthesized by a simple two-step hydrothermal method,which showed enhanced tetracycline hydrochloride(TCH)removal efficiency as compared to the pure CuFe_(2)O_(4) in Fenton-like reaction.A removal efficiency of 94%was achieved with 0.2 g L^(-1) catalyst and 20 mmol L^(-1) H_(2)O_(2) within 90 min.We demonstrated that 5%C–CuFe_(2)O_(4) catalyst in the presence of H_(2)O_(2) was significantly efficient for TCH degradation under the near-neutral pH(5–9)without buffer.Multiple techniques,including SEM,TEM,XRD,FTIR,Raman,XPS M€ossbauer and so on,were conducted to investigate the structures,morphologies and electronic properties of as-prepared samples.The introduction of carbon can effectively accelerate electron transfer by cooperating with Cu and Fe to activate H_(2)O_(2) to generate·OH and·O_(2)^(-).Particularly,theoretical calculations display that the p,p,d orbital hybridization of C,O,Cu and Fe can form C–O–Cu and C–O–Fe bonds,and the electrons on carbon can transfer to metal Cu and Fe along the C–O–Fe and C–O–Cu channels,thus forming electron-rich reactive centers around Fe and Cu.This work provides lightful reference for the modification of spinel ferrites in Fenton-like application.

Kinetics of the direct reaction between ozone and phenol by high-gravity intensified heterogeneous catalytic ozonation

In this study,high-gravity intensified heterogeneous catalytic ozonation is utilized for treatment of phenol-containing wastewater,and the kinetics of the direct reaction between ozone and phenol in the presence of excess tertiary butanol(TBA)is investigated.It is revealed that the direct reaction between ozone and phenol in the rotating packed bed(RPB)follows the pseudo-first-order kinetics with a reaction rate constant higher than that in the conventional bubbling reactor(BR).Under different conditions of temperature,initial pH,high-gravity factor,and gaseous ozone concentration,the apparent reaction rate constant varies in the range of 0.0160–0.115 min-1.An empirical power-exponential model is established to characterize the effects of these parameters on the direct reaction between ozone and phenol by high-gravity intensified heterogeneous catalytic ozonation.

Highly reactive and reusable heterogeneous activated carbons-based palladium catalysts for Suzuki-Miyaura reaction

Suzuki-Miyaura reaction of aryl halides with phenylboronic acid using a heterogeneous palladium catalyst based on activated carbons(AC) was systematically investigated in this work. Two different reaction modes(batch procedure and continuous-flow procedure) were used to study the variations of reaction processing. The heterogeneous catalysts presented excellent reactivity and recyclability for iodobenzene and bromobenzene substrates in batch mode, which can be attributed to stabilization of Pd nanoparticles by the thiol and amino groups on the AC supports. However, significant dehalogenation in the reaction mixture and Pd leaching from the heterogeneous catalysts were observed in continuous-flow mode.This unique phenomenon in continuous-flow mode resulted in a dramatic decline in reaction selectivity and durability of heterogeneous catalysts comparing with that of batch mode. In addition, the heterogeneous Pd catalysts with thiol-and amino-modified AC supports exhibited different reactivity and durability in batch and continuous-flow mode owing to the difference of interaction between Pd species and AC supports.

Metal-doped(Cu,Zn)Fe2O4 from integral utilization of toxic Zn-containing electric arc furnace dust: An environment-friendly heterogeneous Fenton-like catalyst

Pure metal-doped(Cu,Zn)Fe2O4 was synthesized from Zn-containing electric arc furnace dust(EAFD)by solid-state reaction using copper salt as additive.The effects of pretreated EAFD-to-Cu2(OH)2CO3·6H2O mass ratio,calcination time,and calcination temperature on the structure and catalytic ability were systematically studied.Under the optimum conditions,the decolorization efficiency and total organic carbon(TOC)removal efficiency of the as-prepared ferrite for treating a Rhodamine B solution were approximately 90.0%and 45.0%,respectively,and the decolorization efficiency remained 83.0%after five recycles,suggesting that the as-prepared(Cu,Zn)Fe2O4 was an efficient heterogeneous Fenton-like catalyst with high stability.The high catalytic activity mainly depended on the synergistic effect of iron and copper ions occupying octahedral positions.More importantly,the toxicity characteristic leaching procedure(TCLP)analysis illustrated that the toxic Zncontaining EAFD was transformed into harmless(Cu,Zn)Fe2O4 and that the concentrations of toxic ions in the degraded solution were all lower than the national emission standard(GB/31574-2015),further confirming that the as obtained sample is an environment-friendly heterogeneous Fenton-like catalyst.

Synthesis of Magnetically Modified Fe-Al Pillared Bentonite and Heterogeneous Fenton-like Degradation of Orange II

Magnetically modified Fe-Al pillared bentonite（Fe3O4/ Fe-Al-Bent） was prepared via chemical co-precipitation method and characterized by powder X-ray diffraction（XRD）, Brunauer-EmmettTeller（BET）, Fourier transform infrared spectroscopy（FTIR） and scanning electron microscopy（SEM）. A series of experiments were carried out to investigate the degradation of Orange II by the obtained heterogeneous catalysts in the presence of H2O2. The experimental result indicated that the synthetic materials had a high catalytic activity and good reusability.

Heterogeneous Degradation of Dyes in Industrial Effluent over Fenton-Like Nano-Fe₂O₃/Goldmine Complex

Nano-Fe2O3/goldmine complex was obtained by chemical coprecipitation reaction on the surface of goldmine waste-solid. Being used as the heterogeneous catalyst in Fenton-like advanced oxidation processes (AOPs), its treatment effect was studied in the removal performance of industrial dyes effluent. Although the maximal COD removal efficiency would reach 35.4% when 5 mL NaClO was added in 100 mL industrial dyes effluent, it is found that by using nano-Fe2O3/goldmine system, the COD removal efficiency of 13,000 mg/L dyes wastewater could reach up to 75.5% in the presence of 30 g/L nano-Fe2O3/goldmine complex and 50 mL/L NaClO at 50。C.

Numerical Study on the Impacts of Heterogeneous Reactions on Ozone Formation in the Beijing Urban Area

The air quality model CMAQ-MADRID （Community Multiscale Air Quality-Model of Aerosol Dynamics, Reaction, Ionization and Dissolution） was employed to simulate summer O3 formation in Beijing China, in order to explore the impacts of four heterogeneous reactions on O3 formation in an urban area. The results showed that the impacts were obvious and exhibited the characteristics of a typical response of a VOC-limited regime in the urban area. For the four heterogeneous reactions considered, the NO2 and HO2 heterogeneous reactions have the most severe impacts on O3 formation. During the O3 formation period, the NO2 heterogeneous reaction increased new radical creation by 30%, raising the atmospheric activity as more NO→NO2 conversion occurred, thus causing the O3 to rise. The increase of O3 peak concentration reached a maximum value of 67 ppb in the urban area. In the morning hours, high NO titration reduced the effect of the photolysis of HONO, which was produced heterogeneously at night in the surface layer. The NO2 heterogeneous reaction in the daytime is likely one of the major reasons causing the O3 increase in the Beijing urban area. The HO2 heterogeneous reaction accelerated radical termination, resulting in a decrease of the radical concentration by 44% at the most. O3 peak concentration decreased by a maximum amount of 24 ppb in the urban area. The simulation results were improved when the heterogeneous reactions were included, with the O3 and HONO model results close to the observations.

MCM-41 anchored sulfonic acid (MCM-41-R-SO_3H):A mild,reusable and highly efficient heterogeneous catalyst for the Biginelli reaction

An efficient three-component synthesis of 3,4-dihydropyrimidinones using MCM-41 anchored sulfonic acid （MCM-41-R-SO3H） as a mild, heterogeneous catalyst for Biginelli reaction in CH3CN under reflux condition is described.

Laboratory simulation of SO_2 heterogeneous reactions on hematite surface under different SO_2 concentrations

The variations of sulfate formation and optical coefficients during SO2 heterogeneous reactions on hematite surface under different SO2 concentrations were examined using in situ diffuse reflectance infrared Fourier transform spectroscopy （DRIFTS） and ion chromatograph （IC）. Laboratory experiments revealed that within ambient SO2 of 0.51-18.6 ppmv, sulfate product, producing velocity, absorption and backward scattering coefficients showed an increasing trend with SO2 concentration. Under given SO2 concentration, the velocity of sulfate producing performed an evolution of initial increasing, midterm decreasing and final stabilizing. The reactive uptake and Brunaner-Emmett-Teller （BET） uptake coefficients of heterogeneous reactions rose with SOz and exhibited high reactivities. Considering global warming, this result is important for the knowledge of heterogeneous reactions of SO2 on mineral particle surface in the atmosphere and the assessment of their impacts on radiative forcing.

A modified model for isothermal homogeneous and heterogeneous reactions in the boundary-layer flow of a nanofluid

The homogeneous and heterogeneous reactions in the boundary-layer of a flat surface are considered. The autocatalysts are assumed to be of regular sizes, while the solution is a dilute nanofluid. The heat release due to the chemical reactions is taken into account. The Buongiorno’s model is used to describe the behaviors of this reaction system. This configuration makes the current model be different from all previous publications. Multiple solutions are given numerically to the rescaled nonlinear system, whose stability is verified. The results show that the strength coefficients of the homogeneous and heterogeneous reactions are key factors to cause the appearance of the multiple solutions in the distribution of the chemical reactions. Nanofluids enhance the diffusion of heat and help maintain the stability of chemical reactions.

Study on Direct Synthesis of Diphenyl Carbonate with Heterogeneous Catalytic Reaction (V) Screening Catalysts and Optimizing Synthesis Conditions

Pd/LaxPbyMnOz, Pd/C, Pd/molecular sieve and Pd-heteropoly acid catalysts for direct synthesis of diphenyl carbonate (DPC) by heterogeneous catalytic reaction were compared and the results of DPC synthesis indicated that the catalyst Pd/LaxPbyMnOz had higher activity. The Pd/LaxPbyMnOz catalyst and the support was characterized by XRD, SEM and TEM, the main phase was La0.62Pb0.38MnO3 and the average diameter could be about 25.4 nm. The optimum conditions for synthesis of DPC with Pd/LaxPbyMnOz were determined by orthogonal experiments and the experimental results showed that reaction temperature was the first factor of effect on the selectivity and yield of DPC, and the concentration of O2 in gas phase also had significant effect on selectivity of DPC. The optimum reaction conditions were catMyst/phenol mass ratio 1 to 50, pressure 4.5 MPa,volume concentration of O2 25%, reaction temperature 60° and reaction time 4 h. The maximum yield and average selectivity could reach 13% and 97% respectively in the batch operation.

Heterogeneous Reactions between Starch and AKD under Solvent-free Conditions

Oxidized starch powder and cationic starch solution were reacted with alkyl ketene dimer(AKD) under heterogeneous conditions at 70℃ for 12 h.The AKD molecules reacted with starch hydroxyl groups to form β-keto ester linkages under the above conditions.The reaction products were separated into CHCl_3-soluble and CHCl_3-insoluble fractions.FT-IR spectroscopy,SEM,Xray diffraction,and TG-DTA analyses of the CHCl_3-insoluble fraction indicated that β-keto ester substituents were introduced to hydroxyl groups on the starch surfaces.The results indicated that hydrogen bonds between the starch molecules were disrupted under heterogeneous conditions upon heating.The activity and accessibility of hydroxyl groups were enhanced,as a result of which β-keto ester bonds were produced between AKD and starch.Based on these results,we speculate that the β-keto esters which existed in the sheets sized by AKD emulsions were generated by the reaction between AKD and starch.

Melting heat transfer in Cu-water and Ag-water nanofluids flow with homogeneous-heterogeneous reactions

This article addresses melting heat transfer in magnetohydrodynamics(MHD)nanofluid flows by a rotating disk. The analysis is performed in Cu-water and Ag-water nanofluids. Thermal radiation, viscous dissipation, and chemical reactions impacts are added in the nanofluid model. Appropriate transformations lead to the nondimensionalized boundary layer equations. Series solutions for the resulting equations are computed.The role of pertinent parameters on the velocity, temperature, and concentration is analyzed in the outputs. It is revealed that the larger melting parameter enhances the velocity profile while the temperature profile decreases. The surface drag force and heat transfer rate are computed under the influence of pertinent parameters. Furthermore, the homogeneous reaction parameter serves to decrease the surface concentration.

Effects of homogeneous-heterogeneous reactions in flow of Powell-Eyring fluid

The steady two-dimensional flow of Powell-Eyring fluid is investigated. The flow is caused by a stretching surface with homogeneous-heterogeneous reactions. The governing nonlinear differential equations are reduced to the ordinary differential equations by similarity transformations. The analytic solutions are presented in series forms by homotopy analysis method(HAM). Convergence of the obtained series solutions is explicitly discussed. The physical significance of different parameters on the velocity and concentration profiles is discussed through graphical illustrations. It is noticed that the boundary layer thickness increases by increasing the Powell-Eyring fluid material parameter(ε) whereas it decreases by increasing the fluid material parameter(δ). Further, the concentration profile increases when Powell-Eyring fluid material parameters increase. The concentration is also an increasing function of Schmidt number and decreasing function of strength of homogeneous reaction. Also mass transfer rate increases for larger rate of heterogeneous reaction.

Reaction Kinetics for Heterogeneous Oxidation of Mn(III) ～Toluene

The reaction kinetics of the heterogeneous oxidation of toluene with Mn 3+ was studied by considering the effects of disproportionation of Mn 3+ in reaction system, a 'parallel' modulus was set up. And then the concentration of Mn 3+ in disproportionation and the concentration of benzaldehyde in oxidation were respectively determined in turn, the rate constant, order and pseudo activation energy of the heterogeneous oxidation were obtained by mathematical deduction and the kinetic equation was concluded. In addition, the reaction mechanism was analyzed. It shows that the results are completely consistent with modulus.

Modeling Study of the Impact of Heterogeneous Reactions on Dust Surfaces on Aerosol Optical Depth and Direct Radiative Forcing over East Asia in Springtime

The spatial distributions and interannual variations of aerosol concentrations,aerosol optical depth(AOD) ,aerosol direct radiative forcings,and their responses to heterogeneous reactions on dust surfaces over East Asia in March 2006-10 were investigated by utilizing a regional coupled climate-chemistry/aerosol model. Anthropogenic aerosol concentrations(inorganic+carbonaceous) were higher in March 2006 and 2008,whereas soil dust reached its highest levels in March 2006 and 2010,resulting in stronger aerosol radiative forcings in these periods.The domain and five-year(2006-10) monthly mean concentrations of anthropogenic and dust aerosols,AOD,and radiative forcings at the surface(SURF) and at the top of the atmosphere(TOA) in March were 2.4μg m-3,13.1μg m-3,0.18,-19.0 W m-2,and-7.4 W m-2,respectively.Heterogeneous reactions led to an increase of total inorganic aerosol concentration;however,the ambient inorganic aerosol concentration decreased,resulting in a smaller AOD and weaker aerosol radiative forcings.In March 2006 and 2010,the changes in ambient inorganic aerosols,AOD,and aerosol radiative forcings were more evident.In terms of the domain and five-year averages,the total inorganic aerosol concentrations increased by 13.7%(0.17μg m-3) due to heterogeneous reactions,but the ambient inorganic aerosol concentrations were reduced by 10.5%(0.13μg m-3) .As a result,the changes in AOD,SURF and TOA radiative forcings were estimated to be-3.9%(-0.007) ,-1.7%(0.34 W m-2) ,and-4.3%(0.34 W m-2) ,respectively,in March over East Asia.

Theoretical and Experimental Study of Reaction of Transesterification of Vegetable Oils in an Alcohol Environment in the SbCF and SCF Conditions with the Ultrasonic Emulsification of Reaction Mixture and the Use of Heterogeneous Catalysts

A quantum-chemical study of the mechanism of transesterification reaction carried out in the traditional and supercritical fluid (SCF) conditions has been performed. Samples of biodiesel fuel have been derived from rapeseed oil in the environment of supercritical ethanol using a flow type unit, both in the absence and in the presence of heterogeneous catalysts-metal oxides. Experimental studies of kinematic viscosity of a large array of samples of derived biodiesel have been performed. The viscous correlation allowing determining the content of the desired product-fatty acid ethyl esters (FAEE)-in biodiesel samples, has been made based on the obtained experimental data on the kinematic viscosity of biodiesel samples. The influence of change of the dielectric permittivity of working environments on the rate of reaction of transesterification in the supercritical fluid conditions has been revealed.

Note on characteristics of homogeneous-heterogeneous reaction in flow of Jeffrey fluid

This letter describes the characteristics of homogeneous-heterogeneous re- action in the boundary layer flow of a Jeffrey fluid due to an impermeable horizontal stretching sheet. An analysis is carried out through the similar values of reactant and auto catalyst diffusion coefficients. Heat released by the reaction is not accounted. The exact solution for the flow of the Jeffrey fluid is constructed. The series solution for the concentration equation is derived. The velocity and concentration fields reflecting the impact of interesting parameters are plotted and examined.

Numerical study of homogeneous–heterogeneous reactions on stagnation point flow of ferrofluid with non-linear slip condition

This study deals with the stagnation point flow of ferrofluid over a flat plate with non-linear slip boundary condition in the presence of homogeneous-heterogeneous reactions.Three kinds of ferroparticles,namely,magnetite(Fe_3O_4),cobalt ferrite(CoFe_2O_4) and manganese zinc ferrite(Mn-ZnFe_2O_4) are taken into account with water and kerosene as conventional base fluids.The developed model of homogeneous-heterogeneous reactions in boundary layer flow with equal and unequal diffusivities for reactant and autocatalysis is considered.The governing partial differential equations are converted into system of non-linear ordinary differential equations by mean of similarity transformations.These ordinary differential equations are integrated numerically using shooting method.The effects of pertinent parameters on velocity and concentration profiles are presented graphically and discussed.We found that in the presence of Fe_3O_4-kerosene and CoFe_2O_4-kerosene,velocity profiles increase for large values of α and β whereas there is a decrement in concentration profiles with increasing values of if and K_s.Furthermore,the comparison between non-magnetic(A1_2O_3) and magnetic Fe_3O_4 nanoparticles is given in tabular form.

Iron single-atom/clusters catalysts derived from iron-rich Enteromorpha after urea-saturation for Fenton-like reaction

Fabrication of single atom catalysts(SACs)by a green and gentle method is important for their practical Fenton-like use.In this work,a high effective iron-based catalyst was prepared from the iron-rich Enteromorpha for NPX degradation via peroxymonosulfate(PMS).Both Fe-SACs and iron-clusters was fabricated from the intrinsic iron element in Enteromorpha after the urea saturation.The Fe-SACs/clusters can achieve 100%of NPX oxidation within 20 min with the k_(obs)of 0.282 min^(-1).Quenching tests indicated that the radical pathways were not dominated in the catalytic systems,and strong electron transfer process can be induced in the Fe-SACs/clusters+PMS system by using the NPX as electron donor and FeSACs/clusters/PMS^*complexes as electron acceptor.This result was consistent with the phenomenon observed in the galvanic oxidation system.In addition,the Fe-SACs/clusters was deposited onto the ceramic membrane(CM)by the spraying-crosslinking process to form a Fe-SACs/clusters@CM,which showed an effective and continuous NPX degradation in a heterogeneous PMS system.