The performance and morphology stability of polymer bulk heterojunetion solar cells based on poly（3-hexylthiophene） （P3HT） as the donor and indene-C6o bisadduct （ICBA） or methanofullerene [6,6]-phenyl C61-butyri...The performance and morphology stability of polymer bulk heterojunetion solar cells based on poly（3-hexylthiophene） （P3HT） as the donor and indene-C6o bisadduct （ICBA） or methanofullerene [6,6]-phenyl C61-butyric acid methyl ester （PCBM） as the aeceptor are compared. Effect of the different donor and aeeeptor weight ratios on photo- voltaic performance of the P3HT：ICBA device is studied. The optimal device achieved power conversion emeiency of 5.51~o with dso of l0.86mA/cm2, Voc of 0.83 V, and fill factor （FF） of 61.1 % under AM 1.5G （lOOmW/cm2） simulated solar illumination. However, the stability measurement shows that cells based on P3HT：ICBA are less stable than those of the device based on P3HT：PCBM. Atomic force microscope results reveal that the morphol- ogy of the P3HT：ICBA film changed considerably during the storage periods due to unstable interpenetrating D-A network. This observation can be explained by the fact that there is lack of intermolecular hydrogen bonds in the P3HT：ICBA system. However, in the P3HT：PCBM system the molecules in the blend film are firmly held together in the solid state by means of intermoleeular hydrogen bonds originating from C-H. ~. Os bonds （where Os comes from the singly-bonded 0 atom of PCBM）, forming a stable three-dimensional network. The measured PL decay lifetimes for P3HT：PCBM and P3HT：ICBA systems are 33.66 ns and 35.34 ns, respectively, indicating that the P3HT：ICBA system has a less efficient exciton separation eftleiency than that of P3HT：PCBM, which may result in the interracial photogenerated charges accumulated on the D： A interface. Such progressive phase segregation between P3HT and ICBA eventually leads to the degradation in performance and deteriorates the stability of the device. We also present an approach to enhance the stability of P3HT：ICBA systems by adding PCBM as the second acceptor. Our results show that by carefully tuning the contents of PCBM as the second acceptor, more stable polymer solar cells can be obtained.展开更多
基金Supported by the Tianjin Natural Science Foundation under Grant Nos 13JCYBJC18900 and 13JCZDJC26700the National High Technology Research and Development Program of China under Grant No 2013AA014201
文摘The performance and morphology stability of polymer bulk heterojunetion solar cells based on poly（3-hexylthiophene） （P3HT） as the donor and indene-C6o bisadduct （ICBA） or methanofullerene [6,6]-phenyl C61-butyric acid methyl ester （PCBM） as the aeceptor are compared. Effect of the different donor and aeeeptor weight ratios on photo- voltaic performance of the P3HT：ICBA device is studied. The optimal device achieved power conversion emeiency of 5.51~o with dso of l0.86mA/cm2, Voc of 0.83 V, and fill factor （FF） of 61.1 % under AM 1.5G （lOOmW/cm2） simulated solar illumination. However, the stability measurement shows that cells based on P3HT：ICBA are less stable than those of the device based on P3HT：PCBM. Atomic force microscope results reveal that the morphol- ogy of the P3HT：ICBA film changed considerably during the storage periods due to unstable interpenetrating D-A network. This observation can be explained by the fact that there is lack of intermolecular hydrogen bonds in the P3HT：ICBA system. However, in the P3HT：PCBM system the molecules in the blend film are firmly held together in the solid state by means of intermoleeular hydrogen bonds originating from C-H. ~. Os bonds （where Os comes from the singly-bonded 0 atom of PCBM）, forming a stable three-dimensional network. The measured PL decay lifetimes for P3HT：PCBM and P3HT：ICBA systems are 33.66 ns and 35.34 ns, respectively, indicating that the P3HT：ICBA system has a less efficient exciton separation eftleiency than that of P3HT：PCBM, which may result in the interracial photogenerated charges accumulated on the D： A interface. Such progressive phase segregation between P3HT and ICBA eventually leads to the degradation in performance and deteriorates the stability of the device. We also present an approach to enhance the stability of P3HT：ICBA systems by adding PCBM as the second acceptor. Our results show that by carefully tuning the contents of PCBM as the second acceptor, more stable polymer solar cells can be obtained.
