Application Layer Multicast Model with Low Delay and High Stability

As an alternative of Internet protocol(IP)multicast,application layer multicast(ALM)is widely used with the advantage of simplicity and flexibility.However,the existing problems of large transmission delay and poor stability limit the application and development.In this article,to solve these problems,an ALM model based on node potential(NP)and topological index(TI)is proposed.The proposed model considers the factors of node capability and node distance in constructing and maintaining multicast tree to reduce transmission delay and increase stability,and thus it improves the application level in real-time multimedia multicast.The computer simulations prove that the proposed model reduces the ALM transmission delay,increases multicast tree stability effectively,and improves the ALM performance,and therefore it is suitable to apply in large-scale real-time multimedia environment.

Novel photoelectric material of perovskite-like(CH_(3))_(3)SPbI_(3) nanorod arrays with high stability

Organometallic halide perovskite materials make great achievements in optoelectronic fields,especially in solar cells,in which the organic cations contain amine components.However,the amine with NàH bonds is easily hydrolyzed with moisture in the air,weakening the perovskite materials stability.It is desirable to develop other non-amine stable perovskite materials.In this work,sulfur-based perovskite-like(CH_(3))_(3)SPbI_(3) nanorod arrays were fabricated by a solution-processed method,which can be indexed hexagonal crystal structure in the space group P63 mc.The binding force is exceptionally strong between the non-amine(CH_(3))_(3) S+and[PbI_(6)]_(4)-octahedral,leading to high stability of(CH_(3))_(3)SPbI_(3).The(CH_(3))_(3)SPbI_(3) nanorod arrays can keep the morphology and crystal structure in an ambient atmosphere over 60 days.In addition,the(CH_(3))_(3)SPbI_(3) nanorod arrays can offer direct charge transfer channels,which show excellent optoelectronic properties.The(CH_(3))_(3)SPbI_(3) nanorod arrays-based solar cells with VOx hole transfer layers achieved a power conversion efficiency of 2.07%with negligible hysteresis.And the(CH_(3))_(3)SPbI_(3) nanorod arrays were also effectively applied in photodetectors with interdigitated gold electrodes.This work demonstrates that sulfur-based perovskite-like(CH_(3))_(3)SPbI_(3) is a novel promising stable compound with great potential for practical optoelectronic applications.

Constructing energetic covalent organic frameworks with high stability and low sensitivity

Developing new functional explosives that display high stability,good energy performance,and low sensitivity are one of the key directions of energetic materials research.In this work,two-dimensional(2D)Schiff-based energetic covalent organic frameworks(COFs)are prepared based on triaminoguanidine salts with different anions as building blocks.Benefiting from the robust covalent bond in 2D extended polygons and strongπ-πinteractions in the eclipsed interlayers,the synthesized energetic COFs showed higher thermal stability and lower mechanical sensitivity than their precursor salts.More importantly,incorporating triaminoguanidine salts into COFs effectively increase the corrosion resistance to metal under high humidity conditions,which is due to the imine moieties in COFs functioning asπacceptors and offering strong bonding with metallic ions.This work provides a new pathway for the development of high-performance energetic materials.

Effects of Al and Co doping on the structural stability and high temperature cycling performance of LiNi_(0.5)Mn_(1.5)O_(4) spinel cathode materials

The poor structural stability and capacity retention of the high-voltage spinel-type LiNi_(0.5)Mn_(1.5)O_(4)(LNMO)limits their further application.Herein,Al and Co were doped in LNMO materials for a more stable structure and capacity.The LNMO,LiNi_(0.45)Al_(0.05)Mn_(1.5)O_(4)(LNAMO)and LiNi_(0.45)Co_(0.05)Mn_(1.5)O_(4)(LNCMO)were synthesized by calcination at 900℃ for 8 h,which was called as solid-phase method and applied universally in industry.XRD,FT-IR and CV test results showed the synthesized samples have cation disordering Fd-3m space group structures.Moreover,the incorporation of Al and Co increased the cation disordering of LNMO,thereby increasing the transfer rate of Li+.The SEM results showed that the doped samples performed more regular and ortho-octahedral.The EDS elemental analysis confirmed the uniform distribution of each metal element in the samples.Moreover,the doped samples showed better electrochemical properties than undoped LNMO.The LNAMO and LNCMO samples were discharged with specific capacities of 116.3 mA·h·g^(-1)and 122.8 mA·h·g^(-1)at 1 C charge/discharge rate with good capacity retention of 95.8% and 94.8% after 200 cycles at room temperature,respectively.The capacity fading phenomenon of the doped samples at 50℃ and 1 C rate was significantly improved.Further,cations doping also enhanced the rate performance,especially for the LNCMO,the discharge specific capacity of 117.9 mA·h·g^(-1)can be obtained at a rate of 5 C.

Excellent Terahertz shielding performance of ultrathin flexible Cu/graphene nanolayered composites with high stability

Electromagnetic interference(EMI)shielding at Terahertz(THz)frequency range attracts increasing attention due to the rapid development of THz science and technologies.EMI shielding materials with small thickness,high shielding effectiveness(SE),good flexibility and stability are highly desirable.Herein,an ultrathin flexible copper/graphene(Cu/Gr)nanolayered composite are prepared,which can reach the average EMI SE of 60.95 dB at 0.1–1.0 THz with a thickness of only 160 nm,indicating that more than 99.9999%of the THz wave power can be shielded.Furthermore,the Cu/Gr nanolayered composite also exhibits excellent oxidation resistance,with a 93.09%maintenance rate for EMI SE value after heating at 120℃for 3 h in air,far higher than that of the bare Cu film(62.15%).Besides,the Cu/Gr nanolayered composite exhibits good mechanical flexibility and flexural fatigue resistance.The EMI SE value of the Cu/Gr nanolayered composite shows a maintenance rate of 98.87%even after 1500 times bending cycles,obviously higher than that of multilayer Cu film(93.07%).These results demonstrate that the ultrathin flexible Cu/Gr nanolayered composites with excellent shielding performance and good stability have a broad application prospect in THz shielding for wearable devices and next generation mobile communication equipment.

In-situ growth of polypyrrole on aramid nanofibers for electromagnetic interference shielding films with high stability

Flexible electromagnetic interference(EMI)shielding films with high stability have shown promising prospect in harsh working conditions such as military,communication,and special protection fields.Herein,flexible aramid nanofibers@polypyrrole(ANF@PPy)films with high stability were easily achieved by the in-situ growth of PPy on the surface of ANF and the subsequent pressured-filtration film-forming process.When the amount of pyrrole(Py)monomer is 40μL,the ANF@PPy(AP40)film exhibited excellent EMI shielding performance with shielding effectiveness(SE)of 41.69 dB,tensile strength of 96.01 MPa,and fracture strain of 21.95%at the thickness of 75.76μm.Particularly,the anticipated EMI shielding performance can be maintained even after being heated at 200℃in air,soaked in 3.5%NaCl solution,repeated folding for one million times,or burned directly,indicating superior environmental durability in harsh conditions.Therefore,it is believed that the ANF@PPy films with high stability offer a facile solution for practical protection for high-performance EMI shielding applications.

A high stability high voltage power supply design for HEPS injection system

Purpose The high energy photon source(HEPS)uses the on-axial injection scheme.There are two designs in this injection scheme that are critical to the performance of the HEPS injection system.One is the strip line kicker and another is the high voltage fast pulse power supply system.In the high voltage fast pulse power supply system,the design of high voltage power supply is very important.The output voltage stability of high voltage power supply directly affects the stability of the pulse amplitude of the injection system.Methods A high voltage power supply with high output voltage stability is designed in this paper,and the scheme is given.The correctness of the design scheme is verified by simulation experiments.Result A prototype is built for full test.The test results showed that the output voltage stability is lower than 58 ppm.The output voltage is 6.4 mV(f≤3 kHz)/113.2 mV(f>3 kHz).Conclusions The designed high voltage power supply can fully meet the requirements of the HEPS injection system.

High Stability Multi-Wavelength Source by Using Synchronized Etalon Filter in Superfluorescent Fiber Source

We demonstrate a new technique to generate a high stability multi-wavelength fiber source by inserting a synchronized etalon filter in superfluorescent fiber source. Multi-wavelength source can easily be obtained over the EDF gain region with the proposed schedule. By partially feedback diffracted spontaneous emission into erbium doped fiber medium, greater output power, extinction ration and narrower linewidth for each channel than that simply using the spectrum slicing technique is easy obtained. Stab...

High-entropy L1_(2)-Pt(FeCoNiCuZn)_(3) intermetallics for ultrastable oxygen reduction reaction

Enhancing the stability of Pt-based electrocatalysts for the sluggish cathodic oxygen reduction reaction(ORR)is critical for proton exchange membrane fuel cells(PEMFCs).Herein,high-entropy intermetallic(HEI)L1_(2)-Pt(FeCoNiCuZn)3is designed for durable ORR catalysis.Benefiting from the unique HEI structure and the enhanced intermetallic phase stability,Pt(FeCoNiCuZn)3/C nanoparticles demonstrate significantly improved stability over Pt/C and PtCu_(3)/C catalysts.The Pt(FeCoNiCuZn)3/C exhibits a negligible decay of the half-wave potential during 30,000 potential cycles from 0.6 to 1.0 V,whereas Pt/C and PtCu_(3)/C are negatively shifted by 46 and 36 m V,respectively.Even after 10,000 cycles at potential up to 1.5 V,the mass activity of Pt(FeCoNiCuZn)3/C still shows~70%retention.As evidenced by the structural characterizations,the HEI structure of Pt(FeCoNiCuZn)3/C is well maintained,while PtCu_(3)/C nanoparticles undergo severe Cu leaching and particle growth.In addition,when assembled Pt(FeCoNiCuZn)3/C as the cathode in high-temperature PEMFC of 160℃,the H_(2)-O_(2)fuel cell delivers almost no degradation even after operating for 150 h,demonstrating the potential for fuel cell applications.This work provides a facile design strategy for the development of high-performance ultrastable electrocatalysts.

Rational Design of Porous N-Ti3C2 MXene@CNT Microspheres for High Cycling Stability in Li–S Battery

Herein,N-Ti3C2@CNT microspheres are successfully synthesized by the simple spray drying method.In the preparation process,HCl-treated melamine(HTM)is selected as the sources of carbon and nitrogen.It not only realizes in situ growth of CNTs on the surface of MXene nanosheets with the catalysis of Ni,but also introduces efficient N-doping in both MXene and CNTs.Within the microsphere,MXene nanosheets interconnect with CNTs to form porous and conductive network.In addition,N-doped MXene and CNTs can provide strong chemical immobilization for polysulfides and effectively entrap them within the porous microspheres.Above-mentioned merits enable N-Ti3C2@CNT microspheres to be ideal sulfur host.When used in lithium–sulfur(Li–S)battery,the N-Ti3C2@CNT microspheres/S cathode delivers initial specific capacity of 927 mAh g−1 at 1 C and retains high capacity of 775 mAh g−1 after 1000 cycles with extremely low fading rate(FR)of 0.016%per cycle.Furthermore,the cathode still shows high cycling stability at high C-rate of 4 C(capacity of 647 mAh g−1 after 650 cycles,FR 0.027%)and high sulfur loading of 3 and 6 mg cm−2 for Li–S batteries.

Enhanced Anion-Derived Inorganic-Dominated Solid Electrolyte Interphases for High-Rate and Stable Sodium Storage

It is highly desirable for the promising sodium storage possessing high rate and long stable capability,which are mainly hindered by the unstable yet conventional solvent-derived organic-rich solid electrolyte interphases.Herein,an electrolyte solvation chemistry is elaborately manipulated to produce an enhanced anion-derived and inorganic components-dominated solid electrolyte interphases by introducing a low permittivity(4.33)bis(2,2,2-trifluoroethyl)ether diluent into the sodium bis(trifluoromethylsulfonyl)imidedimethoxyethane-based high concentration electrolyte to obtain a localized high concentration electrolyte.The bis(2,2,2-trifluoroethyl)ether breaks the balance of original cation solvation structure and tends to interact with Na^(+)-coordinated dimethoxyethane solvent rather than Na^(+)in high concentration electrolyte,leaving an enhanced Coulombic interaction between Na^(+)and(FSO_(2))_(2)N^(-),and more(FSO_(2))_(2)N^(-)can enter the Na^(+)solvation shell,forming a further increased number of Na^(+)-(FSO_(2))_(2)N^(-)-dimethoxyethane clusters(from 82.0%for high concentration electrolyte to 94.3%for localized high concentration electrolyte)at a low salt dosage.The preferential reduction of this(FSO_(2))_(2)N^(-)-enriched clusters rather than the dimethoxyethane-dominated Na^(+)solvation structure produces an enhanced anion-derived and inorganic components-dominated solid electrolyte interphases.The reversible charge storage process of Na is decoupled by operando Raman along with a shift of D and G peaks.Benefiting from the enhanced anion-derived electrode-electrolyte interface,the commercial hard carbon anode in localized high concentration electrolyte shows a well rate capability(5 A g^(−1),70 mAh g^(−1)),cycle performance and stability(85%of initial capacity after 700 cycles)in comparison to that of high concentration electrolyte(68%)and low concentration electrolyte(only 5%after 400 cycles),indicative of uniqueness and superiorities towards stable Na storage.

Highly sensitive and stable probe refractometer based on configurable plasmonic resonance with nano-modified fiber core

A dispersion model is developed to provide a generic tool for configuring plasmonic resonance spectral characteristics.The customized design of the resonance curve aiming at specific detection requirements can be achieved.According to the model,a probe-type nano-modified fiber optic configurable plasmonic resonance(NMF-CPR)sensor with tip hot spot enhancement is demonstrated for the measurement of the refractive index in the range of 1.3332-1.3432 corresponding to the low-concentration biomarker solution.The new-type sensing structure avoids excessive broadening and redshift of the resonance dip,which provides more possibilities for the surface modification of other functional nanomaterials.The tip hot spots in nanogaps between the Au layer and Au nanostars(AuNSs),the tip electric field enhancement of AuNSs,and the high carrier mobility of the WSe_(2)layer synergistically and significantly enhance the sensitivity of the sensor.Ex-perimental results show that the sensitivity and the figure of merit of the tip hot spot enhanced fiber NMF-CPR sensor can achieve up to 2995.70 nm/RIU and 25.04 RIU^(−1),respectively,which are 1.68 times and 1.29 times higher than those of the conventional fiber plasmonic resonance sensor.The results achieve good agreements with numerical simulations,demonstrate a better level compared to similar reported studies,and verify the correctness of the dispersion model.The detection resolution of the sensor reaches up to 2.00×10^(−5)RIU,which is obviously higher than that of the conventional side-polished fiber plasmonic resonance sensor.This indicates a high detection accuracy of the sensor.The dense Au layer effectively prevents the intermediate nanomaterials from shedding and chemical degradation,which enables the sensor with high stability.Furthermore,the terminal reflective sensing structure can be used as a practical probe and can allow a more convenient operation.

Highly active and stable Co nanoparticles embedded in nitrogen-doped mesoporous carbon nanofibers for aqueous-phase levulinic acid hydrogenation

Developing a highly active and durable non-noble metal catalyst for aqueous-phase levulinic acid(LA)hydrogenation to g-valerolactone(GVL)is an appealing yet challenging task.Herein,we report well-dispersed Co nanoparticles(NPs)embedded in nitrogen-doped mesoporous carbon nanofibers as an efficient catalyst for aqueous-phase LA hydrogenation to GVL.The Co zeolitic imidazolate framework(ZIF-67)nanocrystals were anchored on the sodium dodecyl sulfate modified wipe fiber(WF-S),yielding one-dimensional(1-D)structured composite(ZIF-67/WF-S).Subsequently,Co NPs were uniformly embedded in nitrogen-doped mesoporous carbon nanofibers(Co^(R)NC/SMCNF)through a pyrolysis-reduction strategy using ZIF-67/WF-S as the precursor.Benefiting from introducing modified wipe fiber WF-S to enhance the dispersion of Co NPs,and Co^(0) with Co-N_xdual active sites,the resulting Co^(R)NC/SMCNF catalyst shows brilliant catalytic activity(206 h^(-1) turnover frequency).Additionally,the strong metal-support interactions greatly inhibited the Co NPs from aggregation and leaching from the mesoporous carbon nanofibers,and thus increasing the reusability of the Co^(R)NC/SMCNF catalyst(reusable nine times without notable activity loss).

Effect of yttrium and manganese addition on catalytic soot combustion activity and anti-high-temperature stability of CeO_(2) catalyst

In order to analyze the influence of the addition of yttrium and manganese on the soot combustion performance and high temperature stability of CeO_(2) catalyst,a series of Y/Mn-modified CeO_(2) catalysts were prepared.The effects of structural properties,textural properties,oxygen vacancies,Ce^(3+),surface adsorbed oxygen species,reduction properties and desorption properties of oxygen species on the activity were analyzed by various characterization methods.The results of the activity test show that the addition of manganese is beneficial to enhancement of the activity,while the addition of yttrium increases the amount of reactive oxygen species,but decreases the activity.After aging at 700℃,the activity of the CeMn catalyst decreases most sharply,while the catalytic activity of the CeY catalyst can be maintained to a certain extent.Interestingly,the addition of yttrium and manganese at the same time can stabilize the activity.The fundamental reason is that yttrium and manganese move to the surface of the solid solution after aging,which increases the reduction performance of the catalyst,thus contributing to the increase of activity.Although the activity of CeYMn catalyst decreases after aging at 800℃,it is still higher than that of other catalysts aged at 700℃.

CoS_2 Yolk-Shell Spheres Coated with Carbon Thin Layers as High Active and Stable Electrocatalysts for Hydrogen Evolution Reaction

Though water electrolysis is effective in generating high-quality hydrogen gas,it requires effective electrocatalysts for hydrogen evolution reaction(HER).CoS_2 have been considered as a promising HER electrocatalyst because of its high ctalytic activity.However,the key limitation for CoS_2 nanomaterial as HER electrocatalyst is its poor stability,which may be due to the structural breakdown of CoS_2 nanostructure or the evolution of S during H_2 evolution in acid media.Coating porous carbon thin layer for protection from structural breakdown and evolution of S is a good way to improve catalytic stability.In addition,coating carbon layer can change electronic structure of CoS_2 for the moderated hydrogen adsorption energy,leading to enhanced catalytic activity.Here,CoS_2 yolk-shell spheres coated with carbon thin layers exhibit superior catalytic performance for HER with low overpotential,small Tafel slope,and excellent stability.

A highly stable membrane with hierarchical structure for wide pH range flow batteries

A membrane with high stability and ion conductivity in wide pH range is essential for energy storage devices.Here,we report a novel membrane with hierarchical core-shell structure,which demonstrates high stability and ion conductivity,simultaneously under a wide pH range applications.Spectral characterizations and theoretical calculation indicate that the non-solvent induces the chain segment configuration and eventually leads to polymer-polymer phase separation,thus forming hierarchical porous core-shell structure.Benefiting from this structure,an acidic vanadium flow battery(VFB)with such a membrane shows excellent performance over 400 cycles with an energy efficiency(EE)of above 81%at current density of 120 mA cm^(-2) and an alkaline zinc-iron flow battery(AZIFB)delivers a cycling stability for more than 200 cycles at 160 mA cm^(-2),along with an EE of above 82%.This paper provides a cost-effective and simple way to fabricate membranes with high performance for variety of energyrelated devices.

MoO2 nanoparticles/carbon textiles cathode for high performance flexible Li-O2 battery

Conventional Li-O2 battery is hardly considered as a next-generation flexible electronics thus far,since it is inflexible,bulk,and limited by the absence of the adjustable cell configuration.Here,we report a binder-free and flexible electrode of x wt%MoO2 NPs/CTs(x=6,16,and 28).A cell with 16 wt% MoO2 NPs/CTs displays a good cyclability over 240 cycles with a low overpotential of 0.33 V on the 1st cycle at a constant current density of 0.2 mA cm-2,a considerable rate performance,a superior reversibility associated with the desired formation and degradation of Li2O2,and a high electrochemical stability even under stringent bending and twisting conditions.Our work represents a promising progress in the material development and architecture design of O2 electrode for flexible Li-O2 batteries.

Investigation of stability of a tunnel in a deep coal mine in China

Stability level of tunnels that exist in an underground mine has a great influence on the safety,production and economic performance of mines.Ensuring of stability for soft-rock tunnels is an important task for deep coal mines located in high in situ stress conditions.Using the available information on stratigraphy,geological structures,in situ stress measurements and geo-mechanical properties of intact rock and discontinuity interfaces,a three-dimensional numerical model was built by using 3DEC software to simulate the stress conditions around a tunnel located under high in situ stress conditions in a coal rock mass in China.Analyses were conducted for several tunnel shapes and rock support patterns.Results obtained for the distribution of failure zones,and stress and displacement felds around the tunnel were compared to select the best tunnel shape and support pattern to achieve the optimum stability conditions.

Boosted Storage Kinetics in Thick Hierarchical Micro-Nano Carbon Architectures for High Areal Capacity Li-Ion Batteries

A practical and effective approach to increase the energy storage capacity of lithium ion batteries(LIBs)is to boost their areal capacity.Developing thick electrodes is one of the most crucial ways to achieve high areal capacity but limited by sluggish ion/electron transport,poor mechanical stability,and high-cost manufacturing strategies.Here we address these constraints by engineering a unique hierarchical-networked 10 mm thick all-carbon electrode,providing a scalable strategy to produce high areal capacity LIB electrodes.The hierarchical-networked structure utilizes micrometer-sized carbon fibers(MCFs)as building blocks,nano-sized carbon nanotubes(CNTs)as good continuous network with excellent electrical conductivity,and pyrolytic carbon as the binder and active material with excellent storage capacity.The combination of the above features endows our HNT-MCF/CNT/PC electrode with excellent performance including high reversible capacity of 15.44 mAh cm^(-2) at 2.0 mA cm^(-2) and exhibits excellent rate capability of 2.50 mAh cm^(-2) under 10.0 mA cm^(-2) current density.The Li-ion storage mechanism in HNT-MCF/CNT/PC involves dual-storage mechanism including intercalation and surface adsorption(pseudocapacitance)confirmed by the cyclic voltammetry and symmetric cell analysis.This work provides insights into the construction of high mechanical stability thick electrode for the next generation high areal capacity LIBs and beyond.

Two‑Dimensional Metal Halides for X‑Ray Detection Applications

Metal halide perovskites have recently emerged as promising candidates for the next generation of X-ray detectors due to their excellent optoelectronic properties.Especially,two-dimensional(2D)perovskites afford many distinct properties,including remarkable structural diversity,high generation energy,and balanced large exciton binding energy.With the advantages of 2D materials and perovskites,it successfully reduces the decomposition and phase transition of perovskite and effectively suppresses ion migration.Meanwhile,the existence of a high hydrophobic spacer can block water molecules,thus making 2D perovskite obtain excellent stability.All of these advantages have attracted much attention in the field of X-ray detection.This review introduces the classification of 2D halide perovskites,summarizes the synthesis technology and performance characteristics of 2D perovskite X-ray direct detector,and briefly discusses the application of 2D perovskite in scintillators.Finally,this review also emphasizes the key challenges faced by 2D perovskite X-ray detectors in practical application and presents our views on its future development.