The sulfur phase in high sulfur-containing bauxite was studied by an X-ray diffraction analysis and a chemistry quantitative analysis.The methods for the removal of different shaped sulfur were also discussed.The resu...The sulfur phase in high sulfur-containing bauxite was studied by an X-ray diffraction analysis and a chemistry quantitative analysis.The methods for the removal of different shaped sulfur were also discussed.The results show that sulfur phases in high sulfur-containing bauxites exist in the main form of sulfide sulfur （pyrite） or sulfate sulfur,and the main sulfur forms of bauxites from different regions are not the same.Through a combination of an X-ray diffraction analysis and a chemistry quantitative analysis,the sulfur phases of high sulfur-containing bauxite could be accurately investigated.Deciding the main sulfur form of high sulfur-containing bauxite could provide theoretical instruction for choosing methods for the removal of sulfur from bauxite,and an oxidizing-roasting process is an effective way to remove sulfide sulfur from high sulfur-containing bauxite,the content of S^2-in crude ore in the digestion liquor is above 1.7 g/L,but in the roasted ore digestion liquor,it is below 0.18 g/L.Using the sodium carbonate solution washing technology to wash bauxite can effectively remove sulfate sulfur,the content of the total sulfur in ore is lowered to below 0.2% and can meet the production requirements for the sulfur content.展开更多
Pyrite inside bauxite could be oxidized into soluble S-containing ions by electrolysis, and thus achieving bauxite desulfurization by using filtration. However, S-containing ions in electrolyte had some corrosion effe...Pyrite inside bauxite could be oxidized into soluble S-containing ions by electrolysis, and thus achieving bauxite desulfurization by using filtration. However, S-containing ions in electrolyte had some corrosion effects on electrode, especially for anode. In this work, six kinds of traditional materials were selected as anode, and their corrosion behaviors were examined by using electrochemistry characterization. Tafel and CV curves from simulating electrolyte suggested that their corrosion potentials were in the following order: Ni﹥C﹥SS﹥Fe﹥Cu﹥Pb–Ag. As expected, the desulfurization ratio and cell voltage from bauxite electrolysis were in the following order respectively: Cu﹥Ni﹥Fe﹥SS﹥C﹥Pb–Ag and Ni﹥Fe﹥SS﹥Cu﹥C﹥Pb–Ag. Finally, Ni was proposed a kind of excellent electrode material for bauxite desulfurization from electrolysis.展开更多
To lower the cost of bauxite electrolysis desulfurization using NaOH solution as the supporting electrolyte, effects of electrolyte recycling on bauxite electrolysis desulfurization were investigated. The results in...To lower the cost of bauxite electrolysis desulfurization using NaOH solution as the supporting electrolyte, effects of electrolyte recycling on bauxite electrolysis desulfurization were investigated. The results indicate that electrode corrosion, cell voltage, the desulfurization rate and the pH value of the electrolyte have no obvious changes with the increase of cycle times. Additionally, there were some transitive valence S-containing ions in electrolyte after the electrolysis, such as SO3^2-,S2O3^2- . However, most of the sulfur in bauxite was eventually oxidized into SO4^2- into the electrolyte, and these S-containing ions did not affect the recycling utilization for electrolyte.展开更多
基金Project(20971041) supported by the National Natural Science Foundation of ChinaProject(09B032) supported by Scientific Research Fund of Hunan Provincial Education Department,China
文摘The sulfur phase in high sulfur-containing bauxite was studied by an X-ray diffraction analysis and a chemistry quantitative analysis.The methods for the removal of different shaped sulfur were also discussed.The results show that sulfur phases in high sulfur-containing bauxites exist in the main form of sulfide sulfur （pyrite） or sulfate sulfur,and the main sulfur forms of bauxites from different regions are not the same.Through a combination of an X-ray diffraction analysis and a chemistry quantitative analysis,the sulfur phases of high sulfur-containing bauxite could be accurately investigated.Deciding the main sulfur form of high sulfur-containing bauxite could provide theoretical instruction for choosing methods for the removal of sulfur from bauxite,and an oxidizing-roasting process is an effective way to remove sulfide sulfur from high sulfur-containing bauxite,the content of S^2-in crude ore in the digestion liquor is above 1.7 g/L,but in the roasted ore digestion liquor,it is below 0.18 g/L.Using the sodium carbonate solution washing technology to wash bauxite can effectively remove sulfate sulfur,the content of the total sulfur in ore is lowered to below 0.2% and can meet the production requirements for the sulfur content.
基金Supported by the Natural Science Foundation of China(51474198,51422405)
文摘Pyrite inside bauxite could be oxidized into soluble S-containing ions by electrolysis, and thus achieving bauxite desulfurization by using filtration. However, S-containing ions in electrolyte had some corrosion effects on electrode, especially for anode. In this work, six kinds of traditional materials were selected as anode, and their corrosion behaviors were examined by using electrochemistry characterization. Tafel and CV curves from simulating electrolyte suggested that their corrosion potentials were in the following order: Ni﹥C﹥SS﹥Fe﹥Cu﹥Pb–Ag. As expected, the desulfurization ratio and cell voltage from bauxite electrolysis were in the following order respectively: Cu﹥Ni﹥Fe﹥SS﹥C﹥Pb–Ag and Ni﹥Fe﹥SS﹥Cu﹥C﹥Pb–Ag. Finally, Ni was proposed a kind of excellent electrode material for bauxite desulfurization from electrolysis.
基金Projects(51004090,51474198)supported by the National Natural Science Foundation of ChinaProject(KF13-03)supported by State Key Laboratory of Advanced Metallurgy University of Science and Technology BeijingProject(2015036)supported by Youth Innovation Promotion Association,Chinese Academy of Sciences
文摘To lower the cost of bauxite electrolysis desulfurization using NaOH solution as the supporting electrolyte, effects of electrolyte recycling on bauxite electrolysis desulfurization were investigated. The results indicate that electrode corrosion, cell voltage, the desulfurization rate and the pH value of the electrolyte have no obvious changes with the increase of cycle times. Additionally, there were some transitive valence S-containing ions in electrolyte after the electrolysis, such as SO3^2-,S2O3^2- . However, most of the sulfur in bauxite was eventually oxidized into SO4^2- into the electrolyte, and these S-containing ions did not affect the recycling utilization for electrolyte.
