Using Parallel Packed Bed within a High Temperature Thermal Energy Storage System for CSP-Plants

In order to optimize the electricity yield of CSP （concentrated solar power） plants, TES （thermal energy storage） systems are regarded as an essential component. Furthermore, for many electricity grid operators, it is important to have spinning reserves in the grid and dispatchable power available, both offered by CSP-plants with integrated thermal energy storage. Enolcon is developing a new TES-system since several years. The system itself was designed to offer a principle simple and robust setup （with regard to execution and operation） and which is reducing the electricity costs of CSP-power plants by the consequent use of state of the art technology. Furthermore, such system shall be open to future developments of CSP-systems with regard to increasing steam temperatures and steam pressure. Such TES-system shall be commercially available for large scale application already in year 2014/2015. The key elements of the enolcon-TES are the open cycle using always ambient air with an air-air-heat exchanger and the arrangement of the storage material in such way to minimize the pressure losses and the own electricity consumption. The development is progressing in a structured way by studies, engineering works, TES-pilot plants, isothermal air flow test plant for the verification of the CFD-calculations, and since end of 2012 by the operation of a high temperature TES-module with all features of the large scale modules.

Modeling and Energy Efficiency Analysis of Thermal Power Plant with High Temperature Thermal Energy Storage(HTTES)

This paper presents the recent research on the study of the strategies for the flexible operation of the thermal power plant to meet the requirement of load balance. The study aimed to investigate the feasibility of bringing the High Temperature Thermal Energy Storage(HTTES) to the thermal power plant steam-water cycle, to identify the suitable HTTES in the cold(hot) section of the reheating pipeline and to test the efficiency of the HTTES integration to increase the flexibility of peak shaving and energy efficiency via thermal power plant with HTTTES modelling and simulation. Thermoflex was adopted to perform the simulation and a 300 MW subcritical coal-fired power plant model was implemented onto the software platform. The simulation results show that it is feasible to extract steam from the steam turbine to charge the HTTES, and to discharge the stored thermal energy back to the power generation process, and to analyse the improved capability of the plant flexible operation with HTTES. Then the study was extended to analyse the effect of thermal energy temperature, the opening of the regulating valve, and the pipeline pressure loss aspects on thermal efficiency of the whole plant. The study is beneficial to achieve more economic operation of the thermal power plant with HTTES integration. It is concluded that the introduction of the HTTES can improve the consumption of wind power, and these ideas and methods for solving the energy consumption of the renewable energy and reducing the peak energy consumption are provided.